Unpacking
Unpacking
Thank you for buying the MSI® H170M PRO-DH/ B150M PRO-DH motherboard.
Check to make sure your motherboard box contains the following items. If something
is missing, contact your dealer as soon as possible.
Motherboard
Drivers & Utilities
Disc
I/O Shield
SATA Cable
Motherboard User
Guide
Unpacking
1
Safety Information
●● The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
●● Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
●● Hold the motherboard by the edges to avoid touching sensitive components.
●● It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is
not available, discharge yourself of static electricity by touching another metal object
before handling the motherboard.
●● Store the motherboard in an electrostatic shielding container or on an anti-static pad
whenever the motherboard is not installed.
●● Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
●● Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
●● If you need help during any installation step, please consult a certified computer
technician.
●● Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
●● Keep this user guide for future reference.
●● Keep this motherboard away from humidity.
●● Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
●● Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
●● All cautions and warnings on the motherboard should be noted.
●● If any of the following situations arises, get the motherboard checked by service
personnel:
▶▶Liquid has penetrated into the computer.
▶▶The motherboard has been exposed to moisture.
▶▶The motherboard does not work well or you can not get it work according to user
guide.
▶▶The motherboard has been dropped and damaged.
▶▶The motherboard has obvious sign of breakage.
●● Do not leave this motherboard in an environment above 60°C (140°F), it may
damage the motherboard.
2
Safety Information
Quick Start
Preparing Tools and Components
Intel® LGA 1151 CPU
CPU Fan
DDR4 Memory
Thermal Paste
Power Supply Unit
Chassis
SATA DVD Drive
Phillips Screwdriver
SATA Hard Disk Drive
Graphics Card
A Package of Screws
Quick Start
3
Installing a Processor
2
1
http://youtu.be/bf5La099urI
3
7
4
5
6
8
9
4
Quick Start
Installing DDR4 memory
http://youtu.be/T03aDrJPyQs
1
1
2
2
3
3
Quick Start
5
Connecting the Front Panel Header
http://youtu.be/DPELIdVNZUI
-
ED
D+
LE
ED
DL
1
9
JFP1
1
HDD LED +
2
3
HDD LED -
4
Power LED +
Power LED -
5
Reset Switch
6
Power Switch
7
Reset Switch
8
Power Switch
9
Reserved
10
No Pin
RESET SW
10
HDD LED
W
TS
SE
RE
PO
HD
SW
ER
PO
W
R
WE
RL
WE
PO
2
JFP1
HDD LED
POWER LED
6
Quick Start
HDD LED HDD LED +
POWER LED POWER LED +
Installing the Motherboard
1
2
Quick Start
7
Installing SATA Drives
http://youtu.be/RZsMpqxythc
1
2
3
5
4
8
Quick Start
Installing a Graphics Card
http://youtu.be/mG0GZpr9w_A
1
2
3
5
4
Quick Start
9
Connecting Peripheral Devices
10
Quick Start
Connecting the Power Connectors
http://youtu.be/gkDYyR_83I4
JPWR1
JPWR2
Quick Start
11
Power On
1
2
3
4
12
Quick Start
Contents
Unpacking.................................................................................................................1
Safety Information....................................................................................................2
Quick Start................................................................................................................3
Preparing Tools and Components........................................................................ 3
Installing a Processor........................................................................................... 4
Installing DDR4 memory....................................................................................... 5
Connecting the Front Panel Header..................................................................... 6
Installing the Motherboard.................................................................................... 7
Installing SATA Drives.......................................................................................... 8
Installing a Graphics Card.................................................................................... 9
Connecting Peripheral Devices.......................................................................... 10
Connecting the Power Connectors..................................................................... 11
Power On............................................................................................................ 12
Specifications.........................................................................................................15
Block Diagram .......................................................................................................18
Rear I/O Panel.........................................................................................................19
LAN Port LED Status Table................................................................................ 19
Realtek HD Audio Manager................................................................................ 19
Overview of Components.....................................................................................21
CPU Socket........................................................................................................ 23
DIMM Slots......................................................................................................... 24
PCI_E1~3: PCIe Expansion Slots...................................................................... 25
SATA1~6: SATA 6Gb/s Connectors................................................................... 25
SE1_21: SATAe Connector................................................................................ 25
JPWR1~2: Power Connectors............................................................................ 26
JFP1, JFP2: Front Panel Connectors................................................................. 26
JUSB1: USB 3.1 Gen1 Connector...................................................................... 27
JUSB2~3: USB 2.0 Connectors......................................................................... 27
JAUD1: Front Audio Connector.......................................................................... 28
JTPM1: TPM Module Connector........................................................................ 28
JCOM1: Serial Port Connector........................................................................... 28
CPUFAN1,SYSFAN1~2: Fan Connectors.......................................................... 29
JLPT1: Parallel Port Connector.......................................................................... 30
JBAT1: Clear CMOS (Reset BIOS) Jumper....................................................... 30
JCI1: Chassis Intrusion Connector..................................................................... 31
EZ Debug LED: Debug LED indicators.............................................................. 31
Contents
13
BIOS Setup..............................................................................................................32
Entering BIOS Setup.......................................................................................... 32
Resetting BIOS................................................................................................... 33
Updating BIOS.................................................................................................... 33
EZ Mode............................................................................................................. 34
Advanced Mode ................................................................................................. 36
SETTINGS.......................................................................................................... 37
Advanced............................................................................................................ 37
Boot.................................................................................................................... 43
Security............................................................................................................... 44
Save & Exit......................................................................................................... 45
OC...................................................................................................................... 46
M-FLASH............................................................................................................ 52
OC PROFILE...................................................................................................... 53
HARDWARE MONITOR..................................................................................... 54
Software Description.............................................................................................55
Installing Windows® 7/ 8.1/ 10............................................................................ 55
Installing Drivers................................................................................................. 55
Installing Utilities................................................................................................. 55
COMMAND CENTER......................................................................................... 56
LIVE UPDATE 6................................................................................................. 60
M-CLOUD........................................................................................................... 62
RAMDISK........................................................................................................... 65
NETWORK GENIE............................................................................................. 66
Intel® Extreme Tuning Utility............................................................................... 68
Intel® Small Business Advantage....................................................................... 69
RAID Configuration (optional)..............................................................................70
Using Intel® Rapid Storage Technology Option ROM........................................ 70
Degraded RAID Array......................................................................................... 73
Troubleshooting ....................................................................................................75
Regulatory Notices................................................................................................76
14
Contents
Specifications
CPU
Chipset
Supports 6th Gen Intel® Core™ i3/i5/i7 processors, and Intel®
Pentium® and Celeron® processors for Socket LGA1151
Intel® H170 Express Chipset (H170M PRO-DH)
Intel® B150 Express Chipset (B150M PRO-DH)
●● 4x DDR4 memory slots, support up to 64GB
▶▶Supports DDR4 2133 MHz
Memory
●● Dual channel memory architecture
●● Supports ECC, un-buffered memory
●● Supports Intel® Extreme Memory Profile (XMP)
Expansion Slots
Onboard Graphics
●● 1x PCIe 3.0 x16 slot
●● 2x PCIe 3.0 x1 slots
●● 1x HDMI™ port, support a maximum resolution of
4096x2160@24Hz, 2560x1600@60Hz
●● 1x DVI-D port, support a maximum resolution of
1920x1200@60Hz
Intel® H170/ B150 Express Chipset
●● 6x SATA 6Gb/s ports
●● 1x SATAe port (PCIe 3.0 x2)*
Storage
●● Supports RAID 0, RAID1, RAID 5 and RAID 10 (only for
H170M PRO-DH)
●● Supports Intel® Smart Response Technology for Intel
Core™ processors. (only for H170M PRO-DH)
* SATAe port is backward compatible with SATA.
●● Intel® H170/ B150 Express Chipset
USB
▶▶6x USB 3.1 Gen1 (SuperSpeed USB) ports (4 ports on
the back panel, 2 ports available through the internal
USB connector)
▶▶6x USB 2.0 (High-speed USB) ports (2 ports on the
back panel, 4 ports available through the internal USB
connectors)
Audio
LAN
●● Realtek® ALC887 Codec
●● 7.1-Channel High Definition Audio
1x Realtek RTL8111H Gigabit LAN controller
Continued on next page
Specifications
15
Continued from previous page
●● 1x PS/2 keyboard port
●● 1x PS/2 mouse port
●● 1x HDMI™ port
Back Panel
Connectors
●● 1x DVI-D port
●● 2x USB 2.0 ports
●● 4x USB 3.1 Gen1 ports
●● 1x LAN (RJ45) port
●● 3x audio jacks
●● 1x 24-pin ATX main power connector
●● 1x 4-pin ATX 12V power connector
●● 6x SATA 6Gb/s connectors
●● 2x USB 2.0 connectors (supports additional 4 USB 2.0
ports)
●● 1x USB 3.1 Gen1 connector (supports additional 2 USB
3.1 Gen1 ports)
Internal Connectors
●● 1x 4-pin CPU fan connector
●● 2x 4-pin system fan connectors
●● 1x Clear CMOS jumper
●● 1x Front panel audio connector
●● 2x Front panel connectors
●● 1x TPM module connector
●● 1x Chassis Intrusion connector
●● 1x Serial port connector
●● 1x Parallel port connector
I/O Controller
NUVOTON NCT6793D Controller Chip
●● CPU/System temperature detection
Hardware Monitor
●● CPU/System fan speed detection
●● CPU/System fan speed control
Form Factor
●● m-ATX Form Factor
●● 9.3 in. x 9.0 in. (23.5 cm x 22.8 cm)
●● 1x 128 Mb flash
BIOS Features
●● UEFI AMI BIOS
●● ACPI 5.0, PnP 1.0a, SM BIOS 2.8
●● Multi-language
Continued on next page
16
Specifications
Continued from previous page
●● Drivers
●● COMMAND CENTER
●● LIVE UPDATE 6
●● FAST BOOT
●● SUPER CHARGER
Software
●● M-CLOUD
●● RAMDISK
●● Intel® Small Business Advantage
●● NETWORK GENIE
●● Intel® Extreme Tuning Utility
●● Norton™ Internet Security Solution
●● Google Chrome™,Google Toolbar, Google Drive
●● CLICK BIOS 5
▶▶EZ Mode & Advanced Mode Switching
▶▶Board Explorer
▶▶Hardware Monitor
●● MILITARY CLASS 4
▶▶Military Class Component
▶▶Military Class Stability and Reliability
-- ESD Protection
MSI Exclusive
Features
-- EMI Protection
-- Humidity Protection
-- Circuit Protection
-- High Temperature Protection
-- VGA Armor Slot
●● COMMAND CENTER
▶▶System Monitor
▶▶Smart Fan Control
●● RAMDISK
●● LIVE UPDATE 6
●● M-CLOUD
●● DDR4 Boost Support
▶▶Dual-Channel DDR4 Memory Support
Specification
Highlights
▶▶Isolated DDR4 Circuit Design
▶▶DDR4 XMP Ready
●● SATA Express Support
●● NVMe / AHCI Driver Support
Specifications
17
Block Diagram
HDMI
DVI-D
Dual Channel DDR4 Memory
CPU
PCI Express Bus
(2 x SATA 6Gb/s)
PCI Express Bus
4 x SATA 6Gb/s
x2
6 x USB 3.1 Gen1
PCI Express Bus
DMI 3.0
1 x SATA Express
x1
H170/ B150
PCIe x1 slot
(5 Gbps)
x1
6 x USB 2.0
PCIe x1 slot
LPC Bus
NV6793
Super I/O
P/S2 Mouse / Keyboard
18
Block Diagram
Realtek
ALC887
Audio Jacks
Rear I/O Panel
Line-in
PS/2 Mouse
PS/2 Keyboard
LAN
DVI-D
Line-out
USB 2.0
USB 3.1 Gen1
Mic in
LAN Port LED Status Table
Link/ Activity LED
Speed LED
Status
Description
Status
Description
Off
No link
Off
10 Mbps connection
Yellow
Linked
Green
100 Mbps connection
Blinking
Data activity
Orange
1 Gbps connection
Realtek HD Audio Manager
After installing the Realtek HD Audio driver, the Realtek HD Audio Manager
icon will appear in the system tray. Double click on this icon to launch.
Device
Selection
Advanced
Settings
Jack Status
Application
Enhancement
Main Volume
Connector
Strings
Profiles
Rear I/O Panel
19
●● Device Selection - allows you to select a audio output source to change the related
options. The check sign indicates the devices as default.
●● Application Enhancement - the array of options will provide you a complete
guidance of anticipated sound effect for both output and input device.
●● Main Volume - controls the volume or balance the right/left side of the speakers
that you plugged in front or rear panel by adjust the bar.
●● Profiles - toggles between profiles.
●● Advanced Settings - provides the mechanism to deal with 2 independent audio
streams.
●● Jack Status - depicts all render and capture devices currently connected with your
computer.
●● Connector Settings - configures the connection settings.
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1. Click on the Advanced Settings to open the dialog below.
2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device
is current connected.
20
Rear I/O Panel
Overview of Components
DIMM1
SYSFAN1
JPWR2
CPUFAN1
CPU Socket
DIMM2
DIMM3
DIMM4
SYSFAN2
EZ Debug LED
JPWR1
JUSB1
SATA5_6
PCI_E1
PCI_E2
SE1_21-SATA43
PCI_E3
JBAT1
JAUD1
JFP2
JFP1
JUSB3
JTPM1
JUSB2
JCOM1
JCI1
JLPT1
Overview of Components
21
Component Contents
22
Port Name
Port Type
Page
CPUFAN1,SYSFAN1~2
Fan Connectors
29
CPU Socket
LGA1151 CPU Socket
23
DIMM1~4
DIMM Slots
24
EZ Debug LED
Debug LED indicators
31
JAUD1
Front Audio Connector
28
JBAT1
Clear CMOS (Reset BIOS) Jumper
30
JCI1
Chassis Intrusion Connector
31
JCOM1
Serial Port Connector
28
JFP1, JFP2
Front Panel Connectors
26
JLPT1
Parallel Port Connector
30
JPWR1~2
Power Connectors
26
JTPM1
TPM Module Connector
28
JUSB1
USB 3.1 Gen1 Connector
27
JUSB2~3
USB 2.0 Connectors
27
PCI_E1~3
PCIe Expansion Slots
25
SATA1~6
SATA 6Gb/s Connectors
25
SE1_21
SATAe Connector
25
Overview of Components
CPU Socket
Introduction to the LGA 1151 CPU
The surface of the LGA 1151 CPU has
two notches and a golden triangle to
assist in correctly lining up the CPU for
motherboard placement. The golden
triangle is the Pin 1 indicator.
Important
●● Always unplug the power cord from the power outlet before installing or removing
the CPU.
●● Please retain the CPU protective cap after installing the processor. MSI will deal
with Return Merchandise Authorization (RMA) requests if only the motherboard
comes with the protective cap on the CPU socket.
●● When installing a CPU, always remember to install a CPU heatsink. A CPU
heatsink is necessary to prevent overheating and maintain system stability.
●● Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
your system.
●● Overheating can seriously damage the CPU and motherboard. Always make sure
the cooling fans work properly to protect the CPU from overheating. Be sure to
apply an even layer of thermal paste (or thermal tape) between the CPU and the
heatsink to enhance heat dissipation.
●● Whenever the CPU is not installed, always protect the CPU socket pins by covering
the socket with the plastic cap.
●● If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.
●● This motherboard is designed to support overclocking. Before attempting to
overclock, please make sure that all other system components can tolerate
overclocking. Any attempt to operate beyond product specifications is not
recommended. MSI® does not guarantee the damages or risks caused by
inadequate operation beyond product specifications.
Overview of Components
23
DIMM Slots
DIMM1
Channel A
DIMM2
DIMM3
Channel B
DIMM4
Memory module installation recommendation
DIMM4
DIMM2
DIMM2
DIMM4
DIMM3
DIMM2
DIMM1
Important
●● Always insert memory modules in the DIMM2 slot first.
●● Due to chipset resource usage, the available capacity of memory will be a little less
than the amount of installed.
●● Based on Intel CPU specification, the Memory DIMM voltage below 1.35V is
suggested to protect the CPU.
●● Please note that the maximum capacity of addressable memory is 4GB or less
for 32-bit Windows OS due to the memory address limitation. Therefore, we
recommended that you to install 64-bit Windows OS if you want to install more than
4GB memory on the motherboard.
●● It is recommended to use a more efficient memory cooling system for full DIMMs
installation or overclocking.
●● The stability and compatibility of installed memory module depend on installed CPU
and devices when overclocking.
24
Overview of Components
PCI_E1~3: PCIe Expansion Slots
PCI_E1: PCIe 3.0 x16 slot
PCI_E2: PCIe 3.0 x1 slot
PCI_E3: PCIe 3.0 x1 slot
Important
When adding or removing expansion cards, always turn off the power supply and
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.
SATA1~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to
one SATA device.
SATA6
SATA5
SATA3
SATA1
SATA4
SATA2
SE1_21: SATAe Connector
This connector is SATAe (SATA Express) interface port. The SATAe connector can be
used with a single SATAe device or two legacy SATA devices.
SATA1
SATA2
SATAe1
Important
●● Please do not fold the SATA or SATAe cable at a 90-degree angle. Data loss may
result during transmission otherwise.
●● SATA or SATAe cables have identical plugs on either sides of the cable. However,
it is recommended that the flat connector be connected to the motherboard for
space saving purposes.
Overview of Components
25
JPWR1~2: Power Connectors
These connectors allow you to connect an ATX power supply.
4
2
12
24
JPWR1
1
13
3
1
JPWR2
1
Ground
3
+12V
2
Ground
4
+12V
1
+3.3V
13
2
+3.3V
14
+3.3V
-12V
3
Ground
15
Ground
4
+5V
16
PS-ON#
5
Ground
17
Ground
6
+5V
18
Ground
7
Ground
19
Ground
8
PWR OK
20
Res
9
5VSB
21
+5V
10
+12V
22
+5V
11
+12V
23
+5V
12
+3.3V
24
Ground
Important
Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.
JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
2
10
1
9
JFP1
1
26
JFP2
Overview of Components
1
HDD LED +
2
3
HDD LED -
4
Power LED +
Power LED -
5
Reset Switch
6
Power Switch
7
Reset Switch
8
Power Switch
9
Reserved
10
No Pin
1
Speaker -
2
Buzzer +
3
Buzzer -
4
Speaker +
JUSB1: USB 3.1 Gen1 Connector
This connector allows you to connect USB 3.1 Gen1 ports on the front panel.
10
11
1
20
1
Power
11
USB2.0+
2
USB3_RX_DN
12
USB2.0-
3
USB3_RX_DP
13
Ground
4
Ground
14
USB3_TX_C_DP
USB3_TX_C_DN
5
USB3_TX_C_DN
15
6
USB3_TX_C_DP
16
Ground
7
Ground
17
USB3_RX_DP
8
USB2.0-
18
USB3_RX_DN
9
USB2.0+
19
Power
10
Ground
20
No Pin
Important
Note that the Power and Ground pins must be connected correctly to avoid possible
damage.
JUSB2~3: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
2
10
1
9
1
VCC
2
VCC
3
USB0-
4
USB1-
5
USB0+
6
USB1+
7
Ground
8
Ground
9
No Pin
10
NC
Important
●● Note that the VCC and Ground pins must be connected correctly to avoid possible
damage.
●● In order to recharge your iPad,iPhone and iPod through USB ports, please install
MSI® SUPER CHARGER utility.
Overview of Components
27
JAUD1: Front Audio Connector
This connector allow you to connect audio jacks on the front panel.
2
10
1
9
1
MIC L
2
Ground
3
MIC R
4
NC
MIC Detection
5
Head Phone R
6
7
SENSE_SEND
8
No Pin
9
Head Phone L
10
Head Phone Detection
JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM security
platform manual for more details and usages.
1
2
14
1
13
LPC Clock
2
3V Standby power
3
LPC Reset
4
3.3V Power
5
LPC address & data pin0
6
Serial IRQ
7
LPC address & data pin1
8
5V Power
9
LPC address & data pin2
10
No Pin
11
LPC address & data pin3
12
Ground
13
LPC Frame
14
Ground
JCOM1: Serial Port Connector
This connector allows you to connect the optional serial port with bracket.
28
Overview of Components
2
10
1
9
1
DCD
2
SIN
3
SOUT
4
DTR
5
Ground
6
DSR
7
RTS
8
CTS
9
RI
10
No Pin
CPUFAN1,SYSFAN1~2: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode and
Voltage Mode. PWM Mode fan connectors provide constant 12V output and adjust fan
speed with speed control signal. Voltage Mode fan connectors control fan speed by
changing voltage. Therefore, when you plug a 3-pin (Non-PWM) fan to a PWM Mode
fan connector, the fan speed will be always maintained at 100%, and that could be
noisy.
PWM Mode fan connector
1
CPUFAN1
1
Ground
2
+12V
3
Sense
4
Speed Control Signal
Voltage Mode fan connector
1
SYSFAN1/ SYSFAN2
1
Ground
2
Voltage Control
3
Sense
4
NC
Controlling the fan speed
There are two ways to manage fan speed. One is to go to BIOS > HARDWARE
MONITOR. The other is to use COMMAND CENTER application.
BIOS > HARDWARE MONITOR
COMMAND CENTER
Both methods offer gradient points of the fan speed that allow you to adjust fan speed
in relation to CPU temperature.
Overview of Components
29
JLPT1: Parallel Port Connector
This connector allows you to connect the optional parallel port with bracket.
2
26
1
25
1
RSTB#
2
AFD#
3
4
ERR#
5
PRND1
6
PRND0
PINIT#
7
PRND2
8
LPT_SLIN#
9
PRND3
10
Ground
11
PRND4
12
Ground
13
PRND5
14
Ground
15
PRND6
16
Ground
17
PRND7
18
Ground
19
ACK#
20
Ground
21
BUSY
22
Ground
23
PE
24
Ground
25
SLCT
26
No Pin
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Keep Data
(default)
Resetting BIOS to default values
1. Power off your computer and unplug it from the outlet.
2. Use a jumper cap to close JBAT1 to clear CMOS.
3. Remove the jumper cap from JBAT1.
4. Plug your computer back into the outlet and power on.
30
Overview of Components
Clear CMOS/
Reset BIOS
JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.
Normal
(default)
Trigger the chassis
intrusion event
Using chassis intrusion detector
1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the
chassis.
2. Close the chassis cover.
3. Go to BIOS > Settings > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
5. Press F10 to save and exit and then press the Enter key to select Yes.
6. Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.
Resetting the chassis intrusion warning
1. Go to BIOS > Settings > Security > Chassis Intrusion Configuration.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.
EZ Debug LED: Debug LED indicators
These LEDs indicate the status of the motherboard.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
Overview of Components
31
BIOS Setup
The default settings offer the optimal performance for system stability in normal
conditions. You should always keep the default settings to avoid possible system
damage or failure booting unless you are familiar with BIOS.
Important
●● BIOS items are continuously update for better system performance. Therefore,
the description may be slightly different from the latest BIOS and should be for
reference only. You could also refer to the HELP information panel for BIOS item
description.
●● The pictures in this chapter are for reference only and may vary from the product
you purchased.
Entering BIOS Setup
Please refer the following methods to enter BIOS setup.
●● Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter
Boot Menu message appears on the screen during the boot process.
●● Use MSI FAST BOOT application. Click on GO2BIOS button and choose OK. The
system will reboot and enter BIOS setup directly.
Click on GO2BIOS
●● Enable the GO2BIOS item (SETTING > Boot > GO2BIOS) in BIOS setup
Advanced mode (F7). It allows the system to enter BIOS setup directly by pressing
the power button for 4 seconds upon bootup.
Function key
Key
Function
Key
Function
F1
General Help
F3
Enter Favorites menu
F4
Enter CPU Specifications menu
F5
Enter Memory-Z menu
F6
Load optimized defaults
F8
Load Overclocking Profile
F9
Save Overclocking Profile
F10
Save Change and Reset*
* When you press F10, a confirmation window which provides the modification
information appears. Select between Yes or No to confirm your choice.
32
BIOS Setup
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There
are several ways to reset BIOS:
●● Go to BIOS and press F6 to load optimized defaults.
●● Short the Clear CMOS jumper on the motherboard.
●● Press the Clear CMOS button, on the rear I/O panel. (Only for the motherboard with
clear CMOS button.)
Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI
website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1. Press Del key to enter the BIOS Setup during POST.
2. Insert the USB flash drive that contains the update file into the computer.
3. Selects the M-FLASH tab and click on Yes to reboot the system and enter the
flash mode.
4. Select a BIOS file to perform the BIOS update process.
5. After the flashing process is 100% completed, the system will reboot.
Updating the BIOS with Live Update 6
Before updating:
Make sure the LAN driver is already installed and the internet connection is set
properly.
Updating BIOS:
1. Install and launch MSI LIVE UPDATE 6.
2. Select Manual scan.
3. Check MB BIOS box and click on Scan button.
4. Select the MB BIOS and click on
file.
icon to download and install the latest BIOS
5. Click Next and choose In Windows mode. And then click Next and Start to start
updating BIOS.
6. After the flashing process is 100% completed, the system will restart.
BIOS Setup
33
EZ Mode
At EZ mode, it provides the basic system information and allows you to configure the
basic setting. To configure the advanced BIOS settings, please enter the Advanced
Mode by pressing the Setup Mode switch or F7 function key.
XMP switch
Setup Mode switch
Screenshot
Favorites
Language
System
information
Boot device
priority bar
Information
display
M-Flash
Favorites
Hardware
Monitor
Function
buttons
●● Function buttons - enable or disable the LAN Option ROM, Fast Boot, HD audio
controller, AHCI, CPU Fan Fail Warning Control and BIOS Log Review by
clicking on their respective button.
●● Hardware Monitor - click on this button to display the Hardware Monitor menu
that allows you to manually control the fan speed by percentage.
●● M-Flash - click on this button to display the M-Flash menu that provides the way to
update BIOS with a USB flash drive.
●● Information display - click on the CPU, Memory, Storage, Fan Info and Help
buttons on left side to display related information.
●● Boot device priority bar - you can move the device icons to change the boot
priority. The boot priority from high to low is left to right.
●● System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/
CPU type, memory size, CPU/ DDR voltage, BIOS version and build date.
●● Language - allows you to select the language of BIOS setup.
●● Screenshot - press this tab or the F12 key to take a screenshot and save it to USB
flash drive (FAT/ FAT32 format only).
●● Setup Mode switch - press this tab or the F7 key to switch between Advanced
mode and EZ mode.
●● XMP switch - click on the inner circle to enable/ disable the X.M.P. (Extreme
Memory Profile). Switch the outer circle to select the X.M.P. profile. This switch will
only be available if the X.M.P. supported memory module be installed.
34
BIOS Setup
Favorites - press any Favorites tab or the F3 key to enter Favorites menu. It
allows you to create personal BIOS menu where you can save and access favorite/
frequently-used BIOS setting items.
▶▶Default HomePage - allows you to select a BIOS menu (e.g. SETTINGS,
OC...,etc) as the BIOS home page.
▶▶Favorite1~5 - allow you to add the frequently-used/ favorite BIOS setting items in
one page.
▶▶To add a BIOS item to a favorite page (Favorite 1~5)
1. Select a BIOS item in SETTINGS, OC or OC PROFILE menu.
2. Right-click or press F2 key.
3. Choose a favorite page and click on OK.
▶▶To delete a BIOS item from favorite page
1. Select a BIOS item in favorite page (Favorite 1~5)
2. Right-click or press F2 key.
3. Choose Delete and click on OK.
BIOS Setup
35
Advanced Mode
Press Setup Mode switch or F7 function key can switch between EZ Mode and
Advanced Mode in BIOS setup.
XMP switch
Setup Mode switch
Screenshot
Favorites
Language
System
information
Boot device
priority bar
BIOS menu
selection
BIOS menu
selection
Menu display
●● XMP switch/ Setup Mode switch/ Screenshot/ Favorites/ Language/ System
information/ Boot device priority bar - please refer to the information of EZ Mode
section.
●● BIOS menu selection - the following options are available:
▶▶SETTINGS - allows you to specify the parameters for chipset and boot devices.
▶▶OC - contains the frequency and voltage adjustments. Increasing the frequency
may get better performance.
▶▶M-FLASH - provides the way to update BIOS with a USB flash drive.
▶▶OC PROFILE - allows you to manage overclocking profiles.
▶▶HARDWARE MONITOR - allows you to control the fan speed and monitor
voltages of system.
▶▶BOARD EXPLORER - provides the information of installed devices on this
motherboard.
●● Menu display - provides BIOS setting items and information to be configured.
36
BIOS Setup
SETTINGS
System Status
▶▶System Date
Sets the system date. Use tab key to switch between date elements.
The format is <day> <month> <date> <year>.
<day>
Day of the week, from Sun to Sat, determined by BIOS. Read-only.
<month>
The month from Jan. through Dec.
<date>
The date from 1 to 31 can be keyed by numeric function keys.
<year>
The year can be adjusted by users.
▶▶System Time
Sets the system time. Use tab key to switch between time elements.
The time format is <hour> <minute> <second>.
▶▶SATA PortX
Shows the information of connected SATA device.
Important
If the connected SATA device is not displayed, turn off computer and re-check SATA
cable and power cable connections of the device and motherboard.
▶▶System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).
▶▶DMI Information
Shows system information, desktop Board Information and chassis Information. (Read
only).
Advanced
▶▶PCI Subsystem Settings
Sets PCI, PCI express interface protocol and latency timer. Press <Enter> to enter the
sub-menu.
BIOS Setup
37
▶▶PEG X - Max Link Speed [Auto]
Sets PCI Express protocol of PCIe x16 slots for matching different installed
devices.
[Auto]
This item will be configured automatically by BIOS.
[Gen1]
Enables PCIe Gen1 support only.
[Gen2]
Enables PCIe Gen2 support only.
[Gen3]
Enables PCIe Gen3 support only.
▶▶PCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]
▶▶ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press <Enter> to enter the
sub-menu.
▶▶Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking] The power LED blinks to indicate the S3 state.
▶▶Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
<Enter> to enter the sub-menu.
▶▶Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
▶▶LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when Onboard LAN Controller is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
▶▶Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled] Enables UEFI network stack.
[Disabled] Disables UEFI network stack.
▶▶SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) offers some advanced features to enhance
the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
[RAID Mode] Enables RAID function for SATA storage devices.
38
BIOS Setup
▶▶SE1-RST Pcie Storage Remapping [Disabled]
Enables or disables Intel Rapid Storage Technology for SATAe PCIe device. This
item will appear when SATA Mode is set to RAID Mode.
▶▶SATAx Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support.
[Enabled] Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.
▶▶HD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
▶▶HPET [Enabled]
Enables or disables the HPET (High Precision Event Timers) support.
▶▶Integrated Graphics Configuration
Adjusts integrated graphics settings for optimum system. Press <Enter> to enter the
sub-menu.
▶▶Initiate Graphic Adapter [PEG]
Selects a graphics device as the primary boot device.
[IGD] Integrated Graphics Display.
[PEG]
PCI-Express Graphics Device.
▶▶Integrated Graphics Share Memory [default]
Selects a fixed amount of system memory allocated to the onboard graphics. This
item will appear when IGD Multi-Monitor is enabled.
▶▶IGD Multi-Monitor [Disabled]
Enables or disables the multi-screen output from integrated graphics and external
graphics card.
[Enabled] Enables multi-screen function for both integrated and external
graphics cards.
[Disabled] Disables this function.
▶▶USB Configuration
Sets the onboard USB controller and device function. Press <Enter> to enter the submenu.
▶▶USB Controller [Enabled]
Enables or disables all USB controller.
▶▶XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature. This item will appear when USB Controller is enabled.
BIOS Setup
39
▶▶Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto]
The system will automatically detect if any USB device is connected
and enable the legacy USB support.
[Enabled] Enable the USB support under legacy mode.
[Disabled] The USB devices will be unavailable under legacy mode.
▶▶Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter>
to enter the sub-menu.
▶▶Serial (COM) Port x Configuration
Sets detailed configuration of serial(COM) port x. Press <Enter> to enter the submenu.
▶▶Serial (COM) Port x [Enabled]
Enables or disables serial (COM) port x.
▶▶Serial (COM) Port x Settings [Auto]
Sets serial port x (COM). If set to Auto, BIOS will optimize the IRQ automatically or
you can set it manually.
▶▶Parallel (LPT) Port Configuration
Sets detailed configuration of parallel port (LPT). Press <Enter> to enter the submenu.
▶▶Parallel (LPT) Port [Enabled]
Enables or disables parallel(LPT) port.
▶▶Parallel (LPT) Port Settings [Auto]
Sets parallel port (LPT). If set to Auto, BIOS will optimize the IRQ automatically or
you can set it manually.
▶▶Device Mode [STD Printer Mode]
Selects an operating mode for parallel port.
[STD Printer Mode]
Printer port mode
[SPP]
Standard Parallel Port mode
[EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard Parallel Port mode.
[ECP] ExtendedCapability Port mode
[ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel Port-1.9/ 1.7 mode.
▶▶Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
<Enter> to enter the sub-menu.
40
BIOS Setup
▶▶EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013
regulation.
[Enabled] Optimize the system power consumption according to EuP 2013
regulation. It will not support S4 & S5 wake up by USB, PCI and
PCIe devices.
[Disabled] Disables this function.
▶▶Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power Off]
Leaves the system in power off state after restoring AC power.
[Power On]
Boot up the system after restoring AC power.
[Last State]
Restores the system to the previous state (power on/ power off)
before AC power loss.
▶▶Windows OS Configuration
Sets Windows 8/ 8.1 detailed configuration and behaviors. Press <Enter> to enter
the sub-menu.
▶▶Windows 8.1/ 10 WHQL Support [Disabled]
Enables the supports for Windows 8.1/ 10 or disables for other operating systems.
Before enabling this item, make sure all installed devices & utilities (hardware &
software) should meet the Windows 8.1/ 10 requirements.
[Enabled] The system will switch to UEFI mode to meet the Windows
equirement.
[Disabled] Disables this function.
▶▶MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. It will disable more devices to
speed up system boot time which is faster than the boot time of Fast Boot.
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And
the following Fast Boot field will be disabled and fixed.
[Disabled] Disables MSI Fast Boot.
Important
When MSI Fast Boot is enabled, you can use MSI FAST BOOT application to enter
BIOS setup if needed. Please refer Entering BIOS Setup section for details.
▶▶Fast Boot [Disabled/ windows7, Enabled/ windows 8.1/ 10]
Enables or disables the fast boot feature for Windows 8.1/ 10. This item will only be
available when MSI Fast Boot is disabled.
[Enabled] Enables the Fast Boot configuration to accelerate system boot time.
[Disabled] Disables the Fast Boot configuration.
▶▶Internal GOP Configuration
Manages the onboard Graphics Output Protocol (GOP). Press <Enter> to enter the
sub-menu. This sub-menu will appear when Windows 8.1/ 10 WHQL Support is
enabled.
BIOS Setup
41
▶▶Secure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press
<Enter> to enter the sub-menu. This sub-menu appear when Windows 8.1/ 10
WHQL Support is enabled.
▶▶Secure Boot Support [Disabled]
Enables or disables secure boot support.
[Enabled] Enables the secure boot function and allow you to set the secure
boot settings.
[Disabled]
Disables this function.
▶▶Secure Boot Mode [Standard]
Selects the secure boot mode. This item is to select how the secure boot keys be
loaded. This item appears when Secure Boot Support is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom] Allows user to configure the secure boot settings and manually load
the secure keys.
▶▶Key Management
Manages the secure boot keys. Press <Enter> to enter the sub-menu. This submenu will appear when Secure Boot Mode sets to [Custom].
▶▶Wake Up Event Setup
Sets system wake up behaviors for different sleep modes. Press <Enter> to enter the
sub-menu.
▶▶Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS] Activates the following items, set wake up events of these items.
[OS] The wake up events will be defined by OS.
▶▶Resume By RTC Alarm [Disabled]
Enables or disables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
[Disabled]
Disables this function.
▶▶Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the
system will automatically resume (boot up) on a specified date/hour/minute/second
in these fields (using the <+> and <-> to select the date & time settings).
▶▶Resume By PCI-E Device [Disabled]
Enables or disables the system wake up by PCI express devices.
42
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of PCIe device is detected.
[Disabled]
Disables this function.
BIOS Setup
▶▶Resume by USB Device [Disabled]
Enables or disables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity
of USB device is detected.
[Disabled]
Disables this function.
▶▶Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Enables or disables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
[Disabled]
Disables this function.
▶▶Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Enables or disables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key]
Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled]
Disables this function.
▶▶Hot Key [Ctrl+Space]
Selects a combination of keys as a hot key to wake the system. This item appears
when you set the Resume From S3/S4/S5 by PS/2 Keyboard to Hot Key.
▶▶Realtek PCIe GBE Family Controller
Shows driver information and configuration of the ethernet controller parameter.
Boot
Sets the sequence of system boot devices.
▶▶Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled]
Shows the logo in full screen.
[Disabled]
Shows the POST messages.
▶▶GO2BIOS [Disabled]
Allows system to enter BIOS setup directly by pressing the Power button for 4 sec
upon bootup.
[Enabled]
The system boots straight to the BIOS setup by long pressing the power
button about 4 seconds when the system is off.
[Disabled]
Disables this function.
▶▶Bootup NumLock State [On]
Select the keyboard NumLock upon bootup.
▶▶Info Block effect [Lock]
Allows you to lock or unlock the help information box.
[Lock]
Hide the help information box.
[Unlock]
Slide out the help information box.
BIOS Setup
43
▶▶AUTO CLR_CMOS [Disabled]
Enables or disables the CMOS data to be resumed automatically when the booting
process hang-up over 5 seconds.
▶▶Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS
installation requirement. This item will become un-selectable and will be configured
automatically by BIOS when Windows 8.1/ 10 WHQL Support is enabled.
[UEFI]
Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot mode.
▶▶FIXED BOOT ORDER Priorities
Sets device priority for system boot.
▶▶Boot Option #1~n
These items are used to prioritize the installed boot devices.
Security
▶▶Administrator Password
Sets administrator password for system security. When the administrator password is
set, user has full rights to change the BIOS items.
▶▶User Password
Sets User Password for system security. When the user password is set, user
might have limited rights to change the BIOS items. This item will be available when
administrator password is set.
Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
▶▶Trusted Computing
Sets TPM (Trusted Platform Module) function.
▶▶TPM Device Selection
Select TPM device: PTT or dTPM.
[PTT] Select it for Intel Platform Trust Technology
[dTPM] Select it for Discrete TPM
▶▶Device select [Auto]
Selects TPM 1.2 or TPM 2.0 technology for TPM device. If set to Auto, BIOS will
detect it automatically.
44
BIOS Setup
▶▶Security Device Support [Enabled]
Enables or disables the TPM function to build the endorsement key for accessing
the system.
▶▶Chassis Intrusion Configuration
Press <Enter> to enter the sub-menu.
▶▶Chassis Intrusion [Disabled]
Enables or disables recording messages when the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled]
Once the chassis is opened, the system will record and issue a
warning message.
[Reset]
Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
[Disabled]
Disables this funcion.
Save & Exit
▶▶Discard Changes and Exit
Exit BIOS setup without saving any change.
▶▶Save Changes and Reboot
Save all changes and reboot the system.
▶▶Save Changes
Save current changes.
▶▶Discard Changes
Discard all changes and restore to the previous values.
▶▶Restore Defaults
Restore or load all default values.
▶▶Boot Override
The installed bootable devices will appear on this menu, you can select one of them to
be the boot device.
BIOS Setup
45
OC
Important
●● Overclocking your PC manually is only recommended for advanced users.
●● Overclocking is not guaranteed, and if done improperly, it could void your warranty
or severely damage your hardware.
▶▶OC Explore Mode [Normal]
Enables or disables to show the normal or expert version of OC settings.
[Normal]
Provides the regular OC settings in BIOS setup.
[Expert] Provides the advanced OC settings for OC expert to configure in BIOS
setup.
Note: We use * as the symbol for the OC settings of Expert mode.
▶▶CPU Ratio Apply Mode [All Core]*
Sets applied mode for CPU ratio. This item only appears when a CPU that supports
Turbo Boost is installed.
[All Core]
Activate the CPU Ratio field. All CPU cores will run the same CPU ratio
that be set in CPU Ratio.
[Per Core] Activate the X-Core Ratio Limit field. Sets each CPU core ratio
separately in X-Core Ratio Limit.
▶▶CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶▶1/2/3/4-Core Ratio Limit [Auto]
Allows you to set the CPU ratios for different number of active cores. These items only
appear when a CPU that support this function is installed.
▶▶Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
▶▶CPU Ratio Mode [Dynamic Mode]*
Selects the CPU Ratio operating mode. This item will appear when you set the CPU
ratio manually.
[Fixed Mode]
Fixes the CPU ratio.
[Dynamic Mode] CPU ratio will be changed dynamically according to the CPU loading.
46
BIOS Setup
▶▶Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU.
▶▶Adjusted Ring Frequency
Shows the adjusted Ring frequency. Read-only.
▶▶GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU.
▶▶Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.
▶▶Misc Setting*
Press Enter, + or - key to open or close the following 3 items related to CPU features.
▶▶EIST [Enabled]*
Enables or disables the Enhanced Intel® SpeedStep Technology.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and
average heat production.
[Disabled] Disables EIST.
▶▶Intel Turbo Boost [Enabled]*
Enables or disables the Intel® Turbo Boost. This item appears when the installed
CPU supports this function.
[Enabled] Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
[Disabled] Disables this function.
▶▶Enhanced Turbo [Auto]
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU
performance.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled] All CPU cores would be increased to maximum turbo ratio.
[Disabled] Disables this function.
▶▶CPU Base Clock (MHz) [Default]
Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please
note that overclocking behavior and stability is not guaranteed. This item appears
when a CPU that support this function is installed.
▶▶CPU Base Clock Apply Mode [Auto]*
Sets the applying mode for adjusted CPU base clock.
[Auto]
This setting will be configured automatically by BIOS.
[Next Boot] CPU will run the adjusted CPU base clock at next boot.
[Immediate] CPU runs the adjusted CPU base clock immediately.
[During Boot] CPU will run the adjusted CPU base clock during boot.
BIOS Setup
47
▶▶DRAM Reference Clock [Auto]*
Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed.
▶▶DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶▶Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
▶▶DRAM Timing Mode [Link]
Selects the memory timing mode.
[Link]
Allows user to configure the DRAM timing for all memory channel.
[UnLink]
Allows user to configure the DRAM timing for respective memory
channel.
▶▶Advanced DRAM Configuration
Press <Enter> to enter the sub-menu. User can set the memory timing for each/ all
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
▶▶Memory Fast Boot [Auto] *
Enables or disables the initiation and training for memory every booting.
[Auto]
The setting will be configured automatically by BIOS.
[Enabled] System will completely keep the archives of first intiation and training for
memory. So the memory will not be initialed and trained when booting
to accelerate the system booting time.
[Disabled]
The memory will be initialed and trained every booting.
▶▶CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.
▶▶DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto, BIOS
will set these voltages automatically or you can set it manually.
▶▶PCH Voltages control [Auto]
These options allows you to set the voltages related to PCH. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.
▶▶CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled]
The system will issue a warning message during boot and then you
have to load the default settings for new devices.
[Disabled]
Disables this function and keeps the current BIOS settings.
▶▶CPU Specifications
48
BIOS Setup
Press <Enter> to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶▶CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the key features of
installed CPU. Read only.
▶▶MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
▶▶DIMMx Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.
▶▶CPU Features
Press <Enter> to enter the sub-menu.
▶▶Hyper-Threading [Enabled]
Intel Hyper-Threading technology treats the multi cores inside the processor as
multi logical processors that can execute instructions simultaneously. In this way,
the system performance is highly improved. This item appears when the installed
CPU supports this technology.
[Enable]
Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
▶▶Active Processor Cores [All]
Allows you to select the number of active CPU cores.
▶▶Limit CPUID Maximum [Disabled]
Enables or disables the extended CPUID value.
[Enabled]
BIOS limits the maximum CPUID input value to circumvent boot
problems with older operating system that do not support the
processor with extended CPUID value.
[Disabled]
Use the actual maximum CPUID input value.
▶▶Execute Disable Bit [Enabled]
Intel’s Execute Disable Bit functionality can prevent certain classes of malicious
buffer overflow attacks where worms attempt to execute code to damage the
system. It is recommended that keeps this item enabled always.
[Enabled]
Enables NO-Execution protection to prevent the malicious attacks
and worms.
[Disabled]
Disables this function.
BIOS Setup
49
▶▶Intel Virtualization Tech [Enabled]
Enables or disables Intel Virtualization technology.
[Enabled]
Enables Intel Virtualization technology and allows a platform to run
multiple operating systems in independent partitions. The system
can function as multiple systems virtually.
[Disabled]
Disables this function.
▶▶Intel VT-D Tech [Enabled]
Enables or disables Intel VT-D (Intel Virtualization for Directed I/O) technology.
▶▶Hardware Prefetcher [Enabled]
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled]
Allows the hardware prefetcher to automatically pre-fetch data
and instructions into L2 cache from memory for tuning the CPU
performance.
[Disabled]
Disables the hardware prefetcher.
▶▶Adjacent Cache Line Prefetch [Enabled]
Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled]
Enables adjacent cache line prefetching for reducing the cache
latency time and tuning the performance to the specific application.
[Disabled]
Enables the requested cache line only.
▶▶CPU AES Instructions [Enabled]
Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.
▶▶Intel Adaptive Thermal Monitor [Enabled]
Enables or disables the Intel adaptive thermal monitor function to protect the CPU
from overheating.
[Enabled]
Throttles down the CPU core clock speed when the CPU is over the
adaptive temperature.
[Disabled]
Disables this function.
▶▶Intel C-State [Auto]
Enables or disables the Intel C-state. C-state is a processor power management
technology defined by ACPI.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
Detects the idle state of system and reduce CPU power consumption
accordingly.
[Disabled] Disable this function.
▶▶C1E Support [Disabled]
Enables or disables the C1E function for power-saving in halt state. This item
appears when Intel C-State is enabled.
50
[Enabled]
Enables C1E function to reduce the CPU frequency and voltage for
power-saving in halt state.
[Disabled]
Disables this function.
BIOS Setup
▶▶Package C State limit [Auto]
This item allows you to select a CPU C-state level for power-saving when system is
idle. This item appears when Intel C-State is enabled.
[Auto]
This setting will be configured automatically by BIOS.
[C0~C8] The power-saving level from high to low is C8 to C0.
▶▶CFG Lock [Enabled]
Lock or un-lock the MSR 0xE2[15], CFG lock bit.
[Enabled] Locks the CFG lock bit.
[Disabled] Un-locks the CFG lock bit.
▶▶EIST [Enabled]
Enables or disables the Enhanced Intel® SpeedStep Technology. This item will
appear when OC Explore Mode is set to Normal.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and
average heat production.
[Disabled] Disables EIST.
▶▶Intel Turbo Boost [Enabled]
Enables or disables the Intel® Turbo Boost. This item is for Simple mode and
appears when a CPU that support Turbo Boost is installed.
[Enabled] Enables this function to boost CPU performance automatically over
specification when system request the highest performance state.
[Disabled] Disables this function.
▶▶Long Duration Power Limit (W) [Auto]
Sets the long duration TDP power limit for CPU in Turbo Boost mode.
▶▶Long Duration Maintained (s) [Auto]
Sets the maintaining time for Long duration power Limit(W).
▶▶Short Duration Power Limit (W) [Auto]
Sets the short duration TDP power limit for CPU in Turbo Boost mode.
▶▶CPU Current Limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the
current is over the specified value, the CPU will automatically reduce the core
frequency for reducing the current.
▶▶DMI Link Speed [Auto]
Sets DMI speed.
BIOS Setup
51
M-FLASH
M-FLASH provides the way to update BIOS with a USB flash drive. Please download
the latest BIOS file that matches your motherboard model from MSI website, save the
BIOS file into your USB flash drive. And then follow the steps below to update BIOS.
1. Insert the USB flash drive that contains the update file into the computer.
2. Click on M-FLASH tab, a demand message will be prompted. Click on Yes to
reboot and enter the flash mode.
3. The system will enter the flash mode and a file selection menu will appear after
rebooting.
4. Select a BIOS file to perform the BIOS update process.
5. After the flashing process is 100% completed, the system will reboot
automatically.
52
BIOS Setup
OC PROFILE
▶▶Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press <Enter> to enter the submenu.
▶▶Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Name the current overclocking profile.
▶▶Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Save the current overclocking profile.
▶▶Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Load the current overclocking profile.
▶▶Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Clear the current overclocking profile.
▶▶OC Profile Load from ROM
Load OC profile from BIOS ROM.
▶▶OC Profile Save to USB
Save OC profile to the USB flash drive. The USB flash drive should be FAT/ FAT32
format only.
▶▶OC Profile Load from USB
Load OC profile from the USB flash drive. The USB flash drive should be FAT/ FAT32
format only.
BIOS Setup
53
HARDWARE MONITOR
Current Temperature & Speed information
Fan control
field
Setting
Buttons
Voltage
display
▶▶Current Temperature & Speed information
Shows the current CPU temperature, system temperature and fans' speeds.
▶▶Fan control field
This motherboard provides a fan speed control feature call Smart Fan. Please check
the Smart Fan Mode box to enable the Smart Fan. It automatically controls fan speed
depending on the current CPU temperature and to keep it with a specific operating
speed. When the current CPU temperature is over/ under the setting temperature,
the CPU/ system fan will run at the corresponding speed. In this field, drag the color
buttons to configure the fan speeds and the target temperatures of CPU for four level.
Important
The changing will achieve after you save the changes and reboot the system.
▶▶Function Buttons
[All Full Speed]
Configures CPU and system fans to run at full operating speed.
[All Set Default]
Configures CPU and system fans to run at default operating speed.
[All Set Cancel]
Discards current changes and restores previous operating speeds to CPU and system fans .
▶▶Voltage display
Shows the current voltages of CPU, system and memory.
54
BIOS Setup
Software Description
Installing Windows® 7/ 8.1/ 10
1. Power on the computer.
2. Insert the Windows® 7/ 8.1/ 10 disc into your optical drive.
3. Press the Restart button on the computer case.
4. For windows 8.1/ 10, skip this step. For Windows 7, access the BIOS menu
SETTING > Advanced > Windows OS Configuration > Windows 7 Installation
and set the item to enabled, save changes and restart.
5. Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
6. Select your optical drive from the Boot Menu.
7. Press any key when screen shows Press any key to boot from CD or DVD...
message.
8. Follow the instructions on the screen to install Windows® 7/ 8.1/ 10.
Installing Drivers
1. Start up your computer in Windows® 7/ 8.1/ 10.
2. Insert MSI® Driver Disc into your optical drive.
3. The installer will automatically appear and it will find and list all necessary drivers.
4. Click Install button.
5. The software installation will then be in progress, after it has finished it will prompt
you to restart.
6. Click OK button to finish.
7. Restart your computer.
Installing Utilities
Before you install utilities, you must complete drivers installation.
1. Insert MSI® Driver Disc into your optical drive.
2. The installer will automatically appear.
3. Click Utilities tab.
4. Select the utilities you want to install.
5. Click Install button.
6. The utilities installation will then be in progress, after it has finished it will prompt
you to restart.
7. Click OK button to finish.
8. Restart your computer.
Software Description
55
COMMAND CENTER
COMMAND CENTER is an user-friendly software and exclusively developed by MSI,
helping users to adjust system settings and monitor status under OS. With the help
of COMMAND CENTER, making it possible to achieve easier and efficient monitoring
process and adjustments than that under BIOS. In addition, the COMMAND CENTER
can be a server for mobile remote control application.
System Information
CPU Temperature
Feature Menu
Feature Title
Profile
Buttons
Feature
Control Panel
Next Feature
Previous
Feature
Page Indicator
Option Buttons
Resize Corner
Profile Buttons
●● Default - load the default values for the current feature.
●● Apply - apply your changes.
●● Save - store values in the file with individual file extension.
●● Load - load the values from the file.
Important
Every time you shut down the system, the configured setting will be restored to the
factory default. If you want to use the saved settings, you have to load it every time by
clicking the Load and Apply buttons.
CPU Frequency
CPU Frequency control panel allows you to change
CPU Ratio and Base clock. You can see the current
frequency of each CPU core on the top of the panel.
56
Software Description
CPU Fan
CPU Fan control panel provides Smart mode and
Manual Mode. You can switch the control mode by
clicking the Smart Mode and Manual Mode buttons
on the top of the CPU Fan control panel.
●● Manual Mode - allows you to manually control the
CPU fan speed by percentage.
●● Smart Mode - a linear fan speed control feature.
The control panel contains 4 dots allows you to
drag and adjust the Smart Speed slopes. The fan
speed will be changed along these lines with CPU
temperature. The white dot will create strip chart in
real time.
Manual Mode
●● System Fan Button - to open the system fan
control panel in new window.
●● Fan Tune Button - to automatically optimize the
smart fan setting.
Smart Mode
CPU Voltage
CPU Voltage control panel allows you to control the
CPU voltage.
DRAM Frequency & DRAM Voltage
●● DRAM Frequency - shows the DRAM clock, ratio
and frequency.
●● DRAM Voltage - allows you to adjust the DRAM
voltage. The risky values are displayed in red.
IGP Frequency & GT Voltage
●● IGP Frequency - allows you to adjust the
IGP ratio, and shows the IGP clock, ratio and
frequency.
●● GT Voltage - allows you to adjust the GT voltage.
The risky values are displayed in red.
Software Description
57
Option Buttons - Advanced
When click the Advanced button, The Voltage, Fan and DRAM icons will appear.
●● Voltage - allows you to adjust advanced voltage values of CPU and chipset.
●● Fan - allows you to control the system fans speed.
●● DRAM - shows the current Advanced DRAM parameters, and allows you to change
the settings by selecting values from the drop-down menu on the right hand side.
●● Sensor - allows you to monitor your motherboard temperature and fan speed with
the virtual thermal image. You can drag and drop the fan icons to new locations.
When you press the Cooling button, all fans will run at full speed.
Option Buttons - Setting
When click the Setting button, The Record, Warning and Mobile Control icons will
appear.
●● Record - allows you to monitor the status of voltage, fan speed and temperature in
real time.
▶▶To filter record charts, select the check box next to the items.
▶▶When click the Play button, the chart pane will start to show the recording chart.
If you want to check the value of a specific spot on chart, please move the orange
vertical line to the spot.
▶▶History Record stores the data and names with date and time.
▶▶To make a history record: Select items and click the Record button. When
finished, click the Record button again. The data will be stored in the drop-down
menu.
▶▶To load a record, click the drop-down menu and select one from the list.
▶▶To delete a record, select the record that you want to delete, and click the Trash
Can icon.
●● Warning - contains fields of voltage, fan speed and temperature for you to set the
threshold values. When system detects the status over your settings, a warning
message will pop-up.
58
Software Description
●● Mobile Control - is only available for the motherboard with the built-in WiFi module.
It allows you to enable/disable the COMMAND CENTER Remote Server. Please
refer to the instruction on the Mobile Control control panel.
●● To start remote control: (optional)
1. Download and install MSI® COMMAND CENTER APP to your mobile device.
2. Enable COMMAND CENTER Remote Server on the Mobile Control panel.
3. Enable SoftAP Management.
4. Enter SSID and Password, and then click the Apply button.
5. Activate Wi-Fi® on your mobile device and connect to SoftAP with the SSID.
6. Run MSI® COMMAND CENTER APP on your mobile device.
7. Find the IP address on the SoftAP Management Setting area, and enter the IP
address on your MSI® COMMAND CENTER APP to link your system.
8. Press Refresh on the MSI® COMMAND CENTER APP to verify that monitoring
and OC functions are working properly.
Option Buttons - Information
When click the Information button, The Motherboard, CPU, Memory and HW
monitor icons will appear.
You can click the icons to open the related information.
Gadget Mode
COMMAND CENTER provides a gadget mode to
monitor the system status. You can switch between
gadget mode and full mode by clicking the arrow
icon
on the top left.
●● To arrange gadgets:
1. Click the Spanner icon
on the Gadget
mode, a configuration panel will slide out.
2. Select the check box next to the items.
3. Click the Close button.
Software Description
59
LIVE UPDATE 6
LIVE UPDATE 6 is an application for the MSI® system to scan and download the latest
drivers, BIOS and utilities. With LIVE UPDATE 6, you don’t need to search the drivers
on websites, and don’t need to know the models of motherboard and graphics cards.
LIVE UPDATE 6 will download the appropriate drivers automatically.
Download Options
Download List
Scan / Download / Total
Installer button
System Information
Last Scanned Date
There are Live Update, History, Setting and System Information tabs at the top.
You can click the tab to switch the control panel.
●● Live Update - When you launch LIVE UPDATE 6, you will see the Live update
tab at first. This tab allows you to select files to download. You can also read the
relevant information by clicking the information icon
on the right of the item
listed.
●● History - shows the downloading history.
●● Setting - allows you to specify the frequency that LIVE UPDATE 6 remind you to
update.
●● System Information - displays the information of the system.
Updating The System
This section describes how to update your system with LIVE UPDATE 6. Please follow
the steps below:
1
2
4
5
3
60
Software Description
1. Select the Live Update tab.
2. Choose Automatic scan, system will automatically scan all the items and search
for the latest update files. Or you can choose Manual scan and select the items
you wish to scan.
3. Click the Scan button at the bottom. It may take several moments to complete the
process.
4. When the download list appears, please select the items you intend to update.
5. Click Download button at the bottom.
6. When Save Path prompt, you can specify a download directory.
7. When downloading you will see the screen below. It may take several moments to
complete the process.
8. To install the applications, simply unpack the packages and install.
Total Installer
Total Installer is a convenient feature to simplify frequent installing procedure. To use
Total Installer:
2
3
1
1. Scan updates in Live Update tab.
2. Check the Select All check-box you intend to update.
3. Click the Total Installer button. LIVE UPDATE 6 will automatically install them.
4. When prompted, click OK to complete the Total Installer procedure
5. Reboot your system.
Software Description
61
M-CLOUD
M-CLOUD is an application of MSI network sharing. It allows you to turn your
computer into Wi-Fi AP. It can also transfer files between your MSI computers.
Soft AP
ON/OFF
History
Server
Information
Users &
Permissions
Server
Directory
Local
Directory
File Transfer
●● Soft AP ON/OFF - click on the Soft AP ON/OFF button to enable virtual Wi-Fi AP.
●● Server Information - indicate information of current server connection.
●● History - click on the History button to view file transfer history.
●● Users & Permissions - click on the Users & Permissions button to open the
Users & Permissions Management window.
●● Local/ Server Directory - you can upload or download files between the local and
the server. There 5 icons on the toolbar at the top of Local/ Server Directory.
▶▶
Refresh - refresh the local/ server directory.
▶▶
Delete - you needs delete permission to delete files.
▶▶
Root Folder- navigate to root folder.
▶▶
Up a Level - navigate up one directory level.
▶▶
New Folder - you needs delete permission to create a new folder.
●● File Transfer - click > button to upload files from the local to the server. Click <
button to download files from the server to the local.
62
Software Description
Setting up Soft AP (optional)
The Soft AP function is only available for the motherboard with the built-in WiFi
module. You can share your network connection to your smartphones, tablets and
laptops with the Soft AP function.
Important
●● You must have an active network connection and an installed Wi-Fi moudle to
enable Soft AP.
●● If you connect to Internet by using PPPoE, you should check Allow other people
to use this connection when set up a new connection.
To use Soft AP:
1
2
3
4
1. Click the Soft AP button to ON and the Soft AP dialogue will pop up.
2. Select an existing network connection.
3. Fill in Wi-Fi network name (SSID) and network password.
4. Click Apply button to complete.
Installing Cloud Storage
M-CLOUD needs a connection to Google Drive or Dropbox in order to detect your
available servers.
Cloud Storage
Server Detection
File Transfer
If you haven’t installed either Google Drive or Dropbox software yet, you can
download and install it from below web address, and please follow the direction on the
web page.
Google Drive: https://www.google.com/drive/download/
Dropbox: https://www.dropbox.com/downloading/
Software Description
63
Managing User Accounts
This section describes how to create/ remove a user account and configure individual
access permissions.
1
2
5
3
4
1. Click the Users & Permissions button and the Users & Permissions
Management window will pop up.
2. Click Add Account button create a new user account.
3. Fill in user’s ID, password and Confirm Password fields.
4. Select permission for the user account.
5. Click Apply button to complete.
Once you create an account 3 management icons will appear on the right hand side.
Delete - delete the user account.
▶▶
Unlock/ Lock - unlock/ lock the user account.
▶▶
/
▶▶
Edit - change the user password and permission.
Transferring Files
This section describes how to transfer files between your local computer and a server.
Important
●● Before using the M-CLOUD to transfer files, you need to connect both the local
computer and the server to either Google Drive or Dropbox properly with the same
user account.
●● To allow your computers to communicate through the firewall with M-CLOUD, you
have to open ports 24680~24780.
1. Activate M-CLOUD both on the local computer and the server.
2. Select a server from the bar
3. Enter User ID and Password and click the Login button.
4. You can select files from Local/ Server Directory and then click the File
Transfer button to upload or download them. You can also drag the files from one
side and drop them on the other side.
64
Software Description
RAMDISK
RAMDISK creates a virtual RAM drive using the available memory in your computer,
the performance of the RAMDISK is faster than an SSD and hard drive. RAMDISK
allows you to store any temporary information on it. Furthermore, using the RAMDISK
will extend your SSD’s life by sparing it from excessive reading and writing.
Creating a RAM Disk
When RAMDISK is started, it will create a default RAM disk. If you want to change
settings, refer to following instructions.
Option
Setting
Backup
Apply
Button
Management
●● Setting - specify Letter, Name, Size and Format of the RAM disk.
●● Option - select browser temporary files to save/load on the RAM disk. You can also
add software files to improve reading speed.
●● Backup - specify backup and restore settings to prevent data loss. All files will be
lost each time the RAMDISK is stopped if you do not backup.
▶▶Browse Button - set the path to the image file.
▶▶Backup Right Now Button - manually backup files.
▶▶Restore On Boot - check this box to have the image file loaded automatically
when RAMDISK starts.
▶▶Auto Backup - check this box to backup automatically over a period of time.
●● Apply Button - allows you to apply changes.
●● Management - shows RAMDISK information and allows you to delete files.
Remove the RAM disk
Dislpay
information
Delete files
in the RAM
disk.
Software Description
65
NETWORK GENIE
NETWORK GENIE is an utility to optimize the traffic for bandwidth control. NETWORK
GENIE is designed for the Realtek LAN chip with Windows 7, Windows 8.1 and
Windows 10 platforms.
Once installed, the Network Genie icon shows on system tray (the right bottom corner
of the screen). Mouse right click at the icon, will display the following screen.
When you hover the mouse cursor over the Mode option, a sub-menu will appear for
you to select Game, Stream, Browser and Auto mode.
●● Show - shows the NETWORK GENIE control panel.
●● Hide - hides the NETWORK GENIE control panel.
●● Exit - exits NETWORK GENIE.
In case no icon is shown on the system tray, it is possible to activate NETWORK
GENIE manually by clicking Start > Programs > MSI > NETWORK GENIE >
NETWORK GENIE.
NETWORK GENIE Control Panel
●● Mode - allows you to quickly change bandwidth priorities for different applications.
●● Applications - lists all network related applications.
●● Advanced - provides detailed settings for NETWORK GENIE.
●● System Info - shows system information.
●● About - shows information of NETWORK GENIE.
66
Software Description
Configuring Application’s Network Priority
2
1
3
1. Go to Application tab.
2. Click L to assign the low network priority to the application, and H to hight. You
can also click the Lock icon to block an application network connection.
3. Click the Save button to store your settings.
Configuring Network Speed
There are two parts in the Advanced tab, one is Internet Speed, and another is
Delay/Sensitivity Settings.
●● Internet Speed - allows you to set the maximum available bandwidth to the upload/
download speed manually or just leave blank for no limit.
●● Delay/Sensitivity Settings - allows you to enable Speed up Response Time and
No TCP Delay to reduce the latency of the high priority applications.
Software Description
67
Intel® Extreme Tuning Utility
Intel® Extreme Tuning Utility (Intel XTU) is a simple overclocking software for you to
tune, test and monitor your system.
Tuning Controls
Navigation
System
Graphs
Views
Settings
Help
System
Table
System
Monitors
●● Views Settings Help
▶▶Views - toggles to switche between Monitoring and Show All view.
▶▶Settings - opens the General Settings window.
▶▶Help - displays the help content for Intel XTU in a separate window.
●● Navigation - lists all of the major functions of Intel XTU.
▶▶System Information - shows the details about your system.
▶▶App-Profile Pairing - tunes automatically based on active application.
▶▶Manual Tuning - changes system settings in a free form.
▶▶Stress Test - tests the stability of your system.
▶▶Benchmarking - analyzes and compares your system’s performance against
other system profiles.
▶▶Profiles - manages sets of system settings.
●● Tuning Controls - displays the controls for changing the system settings in manual
tuning. For stress tests and profiles, this area displays the settings for these
features.
●● System Table - displays information about the current system settings and a
summary of your changes.
●● System Graphs - shows measured system values over a period of time. The
system graphs update live as changes are detected in the system. You can
customize the system graphs to show the data you need for your overclocking
strategy in the system graphs preferences.
●● System Monitors - shows the range of the value, averages, and the current value.
The monitors change color if the monitored values fall into warning or critical zones.
68
Software Description
Intel® Small Business Advantage
Intel® Small Business Advantage (Intel® SBA) provides an out-of-the-box hardwarebased security and productivity suite designed for the small business user. Intel SBA
includes a customizable user interface and several bundled Intel applications.
Help
Tabs Selection
Applications Selection
Applications Description
Help Button
There is a help button
on the top right. If you need to know detailed introductions.
Just click on the help button, to get the information.
Password settings
By default, the system is in an unconfigured state. Before the hardware capabilities
can be used by Intel SBA software, the system must be configured. This is done in the
Settings > Password Settings tab in the main menu.
Fill out the form to create the new password and click Save. You will be asked to enter
the password when you want to start using Intel SBA.
Important
●● Upon completion of the password settings, please keep your password secure.
●● Please remember your answers to the security questions.
Software Description
69
RAID Configuration (optional)
Below are the different types of a RAID.
RAID 0 breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly
improves I/O performance.
RAID 1 provides data redundancy by mirroring data between the hard drives and
provides enhanced read performance.
RAID 5 provides data striping at the byte level and also stripe error correction
information. This results in excellent performance and good fault tolerance.
RAID 10 uses four hard drives to create a combination of RAID 0 and 1 by forming a
RAID 0 array from two RAID 1 arrays.
RAID level comparison
RAID 0
RAID 1
RAID 5
RAID 10
Minimum # drives
2
2
3
4
Data protection
None
Excellent
Excellent
Excellent
Read performance
Excellent
OK
Good
OK
Write performance
Excellent
Good
OK
Good
Capacity utilization
100%
50%
67%~(1-1/n)
50%
Using Intel® Rapid Storage Technology Option ROM
First, you need to set the SATA mode to RAID in BIOS to create, delete and reset
RAID volumes. To enter the IRST Option ROM, reboot and press Ctrl + I keys to enter
the IRST Option ROM during the POST, the following window will appear.
[ [ MAIN
MAIN MENU ] ]
1.
2.
3.
4.
Recovery Volume Options
Create RAID Volume
5.
Acceleration Options
Delete RAID Volume
6.
Exit
Reset Disks to Non-RAID
[ DISK / VOLUME INFORMATION ]
RAID Volumes :
None defined.
Physical Devices :
Port Device Model
1
XXXX-XXXXXXXX
2
XXXX-XXXXXXXX
[ ↑↓] - Select
Serial #
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
[ESC] - Exit
Size Type/Status (Vol ID)
XXX.XGB Non-RAID Disk
XXX.XGB Non-RAID Disk
[ENTER] - Select Menu
Important
The following procedure is only available with a newly-built system or if you are
reinstalling your OS. It should not be used to migrate an existing system to RAID.
70
RAID Configuration (optional)
Creating RAID Volume
1. Select option Create RAID Volume and press Enter key. The following screen
appears.
[ CREATE VOLUME MENU ]
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
Sync :
Volume0
RAID1(Mirror)
Select Disks
N/A
XXX.X GB
N/A
Create Volume
[ HELP ]
RAID 1 : Mirrors data (redundancy) .
[ ↑↓] - Change
[TAB] - Next
[ESC] - Previous Menu
[ENTER] - Select
2. Specify a RAID Volume name and then press the Tab or Enter key to go to the
next field
3. Use the ↑↓←→ arrow keys to select the RAID level best suited to your usage
model in RAID Level.
4. In the Disk field, press Enter key and use Space key to select the disks you want
to create for the RAID volume, then click Enter key to finish selection. This field
will become available according to the selected RAID level.
5. Select the strip size for the RAID array by using the ↑ upper arrow or ↓ down
arrow keys to scroll through the available values, and pressing the Enter key
to select and advance to the next field. The available values range from 4KB to
128 KB in power of 2 increments. The strip size should be chosen based on the
planned drive usage. Here are some typical values:
RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB.
6. Select the capacity of the volume in the Capacity field. The default value is the
maximum volume capacity of the selected disks.
Important
Since you want to create two volumes, this default size (maximum) needs to be
reduced. Type in a new size for the first volume. As an example: if you want the
first volume to span the first half of the two disks, re-type the size to be half of what
is shown by default. The second volume, when created, will automatically span the
remainder of two hard drives.
7. Go to the Create Volume field and press Enter, a WARNING message will
appear for you to confirm if you are sure to create the RAID volume. Press Y to
continue.
RAID Configuration (optional)
71
Delete RAID Volume
Here you can delete the RAID volume, but please be noted that all data on RAID
drives will be lost.
Important
If your system currently boots to RAID and you delete the RAID volume in the IRST
Option ROM, your system will become unbootable.
Select option Delete RAID Volume from the main menu screen and press Enter key
to select a RAID volume for deletion. Then press Delete key to delete the selected
RAID volume. The following screen appears.
[ DELETE VOLUME MENU ]
Name
Volume0
Level
RAID1(Mirror)
Drives
2
Capacity
XXX.XGB
Status
Normal
Bootable
Yes
[ DELETE VOLUME VERIFICATION ]
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
HELP “Volume0”?
]
Are you sure you want to[ delete
(Y / N) :
Deleting a volume will reset the disks to non-RAID.
WARNING : ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[ ↑↓] - Select
[ESC] - Previous Menu
[DEL] - Delete Volume
Press Y key to accept the volume deletion.
Reset Disks to Non-RAID
Select option Reset Disks to Non-RAID from the main menu screen and press Enter
to delete the RAID volume and remove any RAID structures from the drives. Use
the Space key to select the disks and press Enter key. A confirmation sentence will
appear below, and then press Y key to accept the selection
[ MAIN MENU
1.
2.
]
4.
Recovery Volume Options
Create RAID Volume
4. ] Recovery Volume Options
Delete RAID Volume [ RESET RAID DATA
5. remove
Exit its RAID structures
Resetting RAID disk will
VOLUME INFORMATION
and revert [ it DISK
to a / non-RAID
disk.
]
RAID VolumesWARNING
:
: Resetting a disk causes all data on the disk to be lost.
None defined.
(This does not apply to Recovery volumes)
PortDevices
Drive : Model
Serial #
Physical
1
XXXX-XXXXXXXX
Port Device
Model
Serial
# XXXXXXXXXXXXXX
2
XXXX-XXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
1
XXXX-XXXXXXXX
Size Status
XXX.XGB
Member Disk
Size Type/Status
(Vol ID)
XXX.XGB
MemberDisk
Disk
XXX.XGB
Non-RAID
2
XXX.XGB Non-RAID Disk
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
Select the disks that should be reset.
[ ↑↓] - Previous/ Next
[ ↑↓] - Select
72
RAID Configuration (optional)
[SPACE] - Selects
[ESC] - Exit
[ENTER] - Selection Complete
[ENTER] - Select Menu
Important
●● You will lose all data on the RAID drives and any internal RAID structures when you
perform this operation.
●● Possible reasons to Reset Disks to Non-RAID could include issues such as
incompatible RAID configurations or a failed volume or failed disk.
Recovery Volume Options
Select option Recovery Volume Options from the main menu screen and press
Enter to change recovery volume mode. The following screen appears:
[ RECOVERY VOLUME OPTIONS ]
1.
2.
Enable Only Recovery Disk
Enable Only Master Disk
[ HELP ]
Enable Only Recovery Disk - enables recovery disk if available and
disables master disk.
Enable Only Master Disk - enables master disk if available and
disables recovery disk.
Actions will result in change from Continuous Update mode to On-Request.
[ ↑↓] - select
[ESC] - Previous Menu
[ENTER] - Select
Recovery mode will change from Continuous Update to On-Request after you enable
Only Recovery Disk or Only Master Disk.
Degraded RAID Array
A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard
drive members fails or is temporarily disconnected, and data mirroring is lost. As a
result, the system can only utilize the remaining functional hard drive member. To
re-establish data mirroring and restore data redundancy, refer to the procedure below
that corresponds to the current situation.
RAID Volumes
ID
Name
0
Volume0
Level
RAID 1(Mirror)
Physical Disks:
Port Device Model
1
XXXXXXXXXXXXX
2
XXXXXXXXXXXXX
Strip
N/A
Size
XXX.XGB
Serial #
XXXXXXXXXXXXX
XXXXXXXXXXXXX
Status
Degraded
Size
XXX.XGB
XXX.XGB
Bootable
Yes
Type/Status(Vol ID)
Member Disk (0)
Member Disk (0)
Press <CTRL-I> to enter Configuration Utility..
Missing Hard Drive Member
1. Power off.
2. Reconnect the hard drive.
RAID Configuration (optional)
73
3. Reboot to Windows®; the rebuild will occur automatically.
Failed Hard Drive Member
1. Power off.
2. Replace the failed hard drive with a new one that is of equal or greater capacity.
3. Reboot the system to IRST Option ROM by press Ctrl + I keys during the POST.
4. Select the port of the destination disk for rebuilding, and then press Enter.
[ MAIN MENU
1.
2.
]
4.
Recovery Volume Options
Create RAID Volume
[ DEGRADED VOLUME DETECTED ]
4.
Recovery Volume Options
Delete RAID Volume
“Degraded” volume and disk available
for rebuilding detected. Selecting
5.
Exit
a disk initiates a rebuild.
Rebuild
completes
in
the
operating
system.
[ DISK / VOLUME INFORMATION
]
RAID Volumes :
Select the port of the destination disk for rebuilding (ESC to exit):
None defined.
Port Drive Model
Serial #
Size
1
XXXX-XXXXXXXX XXXXXXXXXXXXXX
XXX.XGB
Physical Devices :
Port Device Model
Serial #
Size Type/Status (Vol ID)
1
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
XXX.XGB Non-RAID Disk
[ ↑↓] - Previous/ Next [ENTER] - Select [ESC] - Exit
2
XXXX-XXXXXXXX
XXXXXXXXXXXXXX
XXX.XGB Non-RAID Disk
[ ↑↓] - Select
[ESC] - Exit
[ENTER] - Select Menu
5. Exit IRST Option ROM, reboot to Windows .
®
6. When prompted to rebuild the RAID volume, click Yes.
7. The Intel® Rapid Storage Technology application will be launched. Right-click
the new hard drive and select Rebuild to this Disk. The Rebuild Wizard will be
launched which will guide you through the process of rebuilding to the new hard
drive.
74
RAID Configuration (optional)
Troubleshooting
Before sending the motherboard for RMA
repair, try to go over troubleshooting
guide first to see if your got similar
symptoms as mentioned below.
Lost BIOS password
The power is not on.
There is no audio
●● Connect the AC power cord to an
electrical outlet securely.
●● Check if all ATX power connectors
like JPWR1~2 is connected from the
power supply to the motherboard?
●● Some power supply units have a
power button on the rear side, make
sure the button is turned on.
●● Check if the power switch cable
is connected to JFP1 pin header
properly.
●● Verify the Clear CMOS jumper JBAT1
is set to Keep DATA.
●● Test with another known working
power supply of equal or greater
wattage.
The power is on, but no signal to
monitor
●● Connect the monitor power cord to a
electrical outlet securely.
●● Make sure the monitor is turned on.
●● Select different inputs on the monitor.
●● If 3 long beeps are heard, remove all
memory modules and try to install only
one memory module in the DIMM2 slot
first and then restart the computer.
●● If 1 long 2 short beeps are heard,
remove and reinstall the graphics card
and then restart the computer.
●● Clear the CMOS, but that will cause
you to lose all customized settings in
the BIOS.
●● Adjust the volume.
●● Connect the speakers/headphones to
audio ports on the motherboard rear
IO panel.
●● Remove secondary speakers/
headphones, HDMI cables, USB audio
devices.
●● Test with another known working
speaker or headphone.
There is no network
●● Make sure the network chipset driver
has been installed.
●● Verify if the network cable is properly
connected and make sure the LAN port
LEDs are properly illuminated.
●● Verify your TCP/IP settings.
●● Restart or reset your router.
●● Test with another known working LAN
cable.
The USB device is not working
●● Make sure your USB drive driver has
been installed.
●● Verify if USB device is listed in
Windows® Device Manager.
●● Connect the USB device to other USB
port on the motherboard rear IO panel.
●● Test with another known working
graphics card.
The computer does not boot after
updating the BIOS
●● Clear the CMOS.
●● Use the secondary BIOS to bootup
the system (Only for motherboard with
Dual BIOS)
Troubleshooting
75
Regulatory Notices
FCC Compliance Statement
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
●● Reorient or relocate the receiving antenna.
●● Increase the separation between the equipment
and receiver.
●● Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
●● Consult the dealer or an experienced radio/TV
technician for help.
Caution: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Tested to comply with FCC standards
FOR HOME OR OFFICE USE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CE Conformity
Hereby, Micro-Star International CO., LTD
declares that this device is in compliance
with the essential safety requirements and
other relevant provisions set out in the European
Directive.
C-Tick Compliance
B급 기기 (가정용 방송통신기자재)
이 기기는 가정용(B급) 전자파적합기기로서 주
로 가정에서 사용하는 것을 목적으로 하며, 모
든 지역에서 사용할 수 있습니다.
クラスB情報技術装置
この装置は、クラスB情報技術装置です。
この装置は、家庭環境で使用することを目
的としていますが、この装置がラジオやテ
レビジョン受信機に近接して使用されると、受信障害
を引き起こすことがあります。取扱説明書に従って
正しい取り扱いをして下さい
VCCI-B
76
Regulatory Notices
Battery Information
European Union:
Batteries, battery packs, and accumulators
should not be disposed of as unsorted
household waste. Please use the public
collection system to return, recycle, or
treat them in compliance with the local
regulations.
Taiwan:
廢電池請回收
For better environmental protection, waste
batteries should be collected separately
for recycling or special disposal.
California, USA:
The button cell battery may contain
perchlorate material and requires special
handling when recycled or disposed of in
California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION: There is a risk of explosion, if battery is
incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Chemical Substances Information
In compliance with chemical substances regulations,
such as the EU REACH Regulation (Regulation EC
No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical
substances in products at:
http://www.msi.com/html/popup/csr/evmtprtt_pcm.html
WEEE (Waste Electrical and
Electronic Equipment) Statement
ENGLISH
To protect the global environment and
as an environmentalist, MSI must remind
you that...
Under the European Union (“EU”)
Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/
EC, which takes effect on August 13,
2005, products of “electrical and electronic equipment”
cannot be discarded as municipal wastes anymore,
and manufacturers of covered electronic equipment will
be obligated to take back such products at the end of
their useful life. MSI will comply with the product take
back requirements at the end of life of MSI-branded
products that are sold into the EU. You can return
these products to local collection points.
ESPAÑOL
MSI como empresa comprometida con la protección
del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea
en materia de desechos y/o equipos electrónicos,
con fecha de rigor desde el 13 de agosto de 2005,
los productos clasificados como “eléctricos y
equipos electrónicos” no pueden ser depositados
en los contenedores habituales de su municipio, los
fabricantes de equipos electrónicos, están obligados
a hacerse cargo de dichos productos al termino de
su período de vida. MSI estará comprometido con los
términos de recogida de sus productos vendidos en
la Unión Europea al final de su periodo de vida. Usted
debe depositar estos productos en el punto limpio
establecido por el ayuntamiento de su localidad o
entregar a una empresa autorizada para la recogida de
estos residuos.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer
Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und
Elektronik-Altgeräte dürfen Elektro- und ElektronikAltgeräte nicht mehr als kommunale Abfälle entsorgt
werden. MSI hat europaweit verschiedene Sammelund Recyclingunternehmen beauftragt, die in die
Europäische Union in Verkehr gebrachten Produkte,
am Ende seines Lebenszyklus zurückzunehmen.
Bitte entsorgen Sie dieses Produkt zum gegebenen
Zeitpunkt ausschliesslich an einer lokalen
Altgerätesammelstelle in Ihrer Nähe.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan
herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking
tot Vervuiling van Electrische en Electronische
producten (2002/96/EC), die op 13 Augustus 2005
in zal gaan kunnen niet meer beschouwd worden als
vervuiling. Fabrikanten van dit soort producten worden
verplicht om producten retour te nemen aan het
eind van hun levenscyclus. MSI zal overeenkomstig
de richtlijn handelen voor de producten die de
merknaam MSI dragen en verkocht zijn in de EU. Deze
goederen kunnen geretourneerd worden op lokale
inzamelingspunten.
FRANÇAIS
En tant qu’écologiste et afin de protéger
l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux
déchets des équipement électriques et électroniques,
directive 2002/96/EC, prenant effet le 13 août 2005,
que les produits électriques et électroniques ne
peuvent être déposés dans les décharges ou tout
simplement mis à la poubelle. Les fabricants de ces
équipements seront obligés de récupérer certains
produits en fin de vie. MSI prendra en compte cette
exigence relative au retour des produits en fin de
vie au sein de la communauté européenne. Par
conséquent vous pouvez retourner localement ces
matériels dans les points de collecte.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje
vodi računa o okolini i prirodnoj sredini, MSI mora da
vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj
ekektronskoj i električnoj opremi, Direktiva 2002/96/EC,
koja stupa na snagu od 13. Avgusta 2005, proizvodi
koji spadaju pod “elektronsku i električnu opremu” ne
mogu više biti odbačeni kao običan otpad i proizvođači
ove opreme biće prinuđeni da uzmu natrag ove
proizvode na kraju njihovog uobičajenog veka trajanja.
MSI će poštovati zahtev o preuzimanju ovakvih
proizvoda kojima je istekao vek trajanja, koji imaju MSI
oznaku i koji su prodati u EU. Ove proizvode možete
vratiti na lokalnim mestima za prikupljanje.
РУССКИЙ
Компания MSI предпринимает активные
действия по защите окружающей среды, поэтому
напоминаем вам, что....
В соответствии с директивой Европейского
Союза (ЕС) по предотвращению загрязнения
окружающей среды использованным электрическим
и электронным оборудованием (директива
WEEE 2002/96/EC), вступающей в силу 13
августа 2005 года, изделия, относящиеся к
электрическому и электронному оборудованию,
не могут рассматриваться как бытовой мусор,
поэтому производители вышеперечисленного
электронного оборудования обязаны принимать
его для переработки по окончании срока службы.
MSI обязуется соблюдать требования по
приему продукции, проданной под маркой MSI
на территории EC, в переработку по окончании
срока службы. Вы можете вернуть эти изделия в
специализированные пункты приема.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako
firma dbająca o ekologię, MSI przypomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”)
dotyczącą odpadów produktów elektrycznych i
elektronicznych (Dyrektywa 2002/96/EC), która
wchodzi w życie 13 sierpnia 2005, tzw. “produkty
oraz wyposażenie elektryczne i elektroniczne “ nie
mogą być traktowane jako śmieci komunalne, tak
więc producenci tych produktów będą zobowiązani
do odbierania ich w momencie gdy produkt jest
wycofywany z użycia. MSI wypełni wymagania UE,
przyjmując produkty (sprzedawane na terenie Unii
Europejskiej) wycofywane z użycia. Produkty MSI
będzie można zwracać w wyznaczonych punktach
zbiorczych.
Regulatory Notices
77
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi
korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik
Malzeme Atığı, 2002/96/EC Kararnamesi altında 13
Ağustos 2005 tarihinden itibaren geçerli olmak üzere,
elektrikli ve elektronik malzemeler diğer atıklar gibi
çöpe atılamayacak ve bu elektonik cihazların üreticileri,
cihazların kullanım süreleri bittikten sonra ürünleri geri
toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan
MSI markalı ürünlerin kullanım süreleri bittiğinde MSI
ürünlerin geri alınması isteği ile işbirliği içerisinde
olacaktır. Ürünlerinizi yerel toplama noktalarına
bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost
MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci
elektrických a elektronických výrobků 2002/96/EC
platné od 13. srpna 2005 je zakázáno likvidovat
“elektrické a elektronické výrobky” v běžném
komunálním odpadu a výrobci elektronických výrobků,
na které se tato směrnice vztahuje, budou povinni
odebírat takové výrobky zpět po skončení jejich
životnosti. Společnost MSI splní požadavky na
odebírání výrobků značky MSI, prodávaných v zemích
EU, po skončení jejich životnosti. Tyto výrobky můžete
odevzdat v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük,
illetve környezetvédőként fellépve az MSI emlékezteti
Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án
hatályba lépő, az elektromos és elektronikus
berendezések hulladékairól szóló 2002/96/EK irányelve
szerint az elektromos és elektronikus berendezések
többé nem kezelhetőek lakossági hulladékként,
és az ilyen elektronikus berendezések gyártói
kötelessé válnak az ilyen termékek visszavételére
azok hasznos élettartama végén. Az MSI betartja a
termékvisszavétellel kapcsolatos követelményeket az
MSI márkanév alatt az EU-n belül értékesített termékek
esetében, azok élettartamának végén. Az ilyen
termékeket a legközelebbi gyűjtőhelyre viheti.
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della
natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo
Smaltimento dei Materiali Elettrici ed Elettronici,
Direttiva 2002/96/EC in vigore dal 13 Agosto 2005,
prodotti appartenenti alla categoria dei Materiali
Elettrici ed Elettronici non possono più essere eliminati
come rifiuti municipali: i produttori di detti materiali
saranno obbligati a ritirare ogni prodotto alla fine
del suo ciclo di vita. MSI si adeguerà a tale Direttiva
ritirando tutti i prodotti marchiati MSI che sono stati
venduti all’interno dell’Unione Europea alla fine del loro
ciclo di vita. È possibile portare i prodotti nel più vicino
punto di raccolta
78
Regulatory Notices
日本JIS C 0950材質宣言
日本工業規格JIS C 0950により、2006年7月1日以降に
販売される特定分野の電気および電子機器について、
製造者による含有物質の表示が義務付けられます。
http://www.msi.com/html/popup/csr/cemm_jp.html
http://tw.msi.com/html/popup/csr_tw/cemm_jp.html
India RoHS
This product complies with the “India E-waste
(Management and Handling) Rule 2011” and
prohibits use of lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl
ethers in concentrations exceeding 0.1 weight % and
0.01 weight % for cadmium, except for the exemptions
set in Schedule 2 of the Rule.
Türkiye EEE yönetmeliği
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Україна обмеження на наявність
небезпечних речовин
Обладнання відповідає вимогам Технічного
регламенту щодо обмеження використання
деяких небезпечних речовин в електричному
та електронному обладнані, затвердженого
постановою Кабінету Міністрів України від 3 грудня
2008 № 1057.
Việt Nam RoHS
Kể từ ngày 01/12/2012, tất cả các sản phẩm do công
ty MSI sản xuất tuân thủ Thông tư số 30/2011/TT-BCT
quy định tạm thời về giới hạn hàm lượng cho phép của
một số hóa chất độc hại có trong các sản phẩm điện,
điện tử”
产品中有害物质的名称及含量
有害物质
部件名称
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板组件*
X
O
O
O
O
O
电池**
X
O
O
O
O
O
外部信号连接头
X
O
O
O
O
O
线材
X
O
O
O
O
O
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求,但所有部件都符合欧
盟RoHS要求。
* 印刷电路板组件: 包括印刷电路板及其构成的零部件。
** 电池本体上如有环保使用期限标识,以本体标识为主。
■ 上述有毒有害物质或元素清单会依型号之部件差异而有所增减。
■ 產品部件本体上如有环保使用期限标识,以本体标识为主。
Copyright
Micro-Star Int’l Co.,Ltd.
Copyright © 2015 All rights reserved.
Revision History
Version 1.0, 2015/06, First release.
The material in this document is the intellectual
property of Micro-Star Int’l Co.,Ltd. We take every care
in the preparation of this document, but no guarantee
is given as to the correctness of its contents. Our
products are under continual improvement and we
reserve the right to make changes without notice.
Technical Support
If a problem arises with your system and no solution
can be obtained from the user guide, please
contact your place of purchase or local distributor.
Alternatively, please try the following help resources for
further guidance.
●● Visit the MSI website for technical guide, BIOS
updates, driver updates, and other information:
http://www.msi.com
●● Register your product at: http://register.msi.com
Trademark Recognition
All product names used in this manual are the
properties of their respective owners and are
acknowledged.
Regulatory Notices
79
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising