Industrial 5-Port 10/100TX Compact Ethernet Switch

Industrial 5-Port 10/100TX Compact Ethernet Switch
ISW-500T
Industrial 5-Port 10/100TX Compact Ethernet Switch
Physical Port
• 5-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function
Layer 2 Features
• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASETX Ethernet standard
• Supports auto-negotiation and 10/100Mbps half/full duplex
mode
• Prevents packet loss with back pressure (half-duplex) and IEEE
802.3x pause frame flow control (full-duplex)
• Complies with IEEE 802.3az Energy Efficient Ethernet (EEE)
Compact Size for More Practicability and Convenience
PLANET ISW-500T Industrial 5-Port 10/100TX Compact Ethernet Switch, suitable for
• IEEE 802.1p CoS
• Supports 1K MAC address
• Automatic address learning and address aging
industrial use, features 5 10/100Mbps auto-negotiation ports, IP30-rated rugged but
compact case and a wide-ranging redundant power system (12~48V DC or 24V AC).
Industrial Case and Installation
The ISW-500T is able to operate in any harsh environment with operating temperature
• IP30 metal case
• DIN rail and wall-mount design
ranging from -40 to 75 degrees C.
• 12 to 48V DC, redundant power with polarity reverse protect
function
• 24V AC power input acceptable
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Free fall, shock-proof and vibration-proof for industries
115mm
104mm
ISW-500T
ISW-800T
Industrial 5/8-Port Compact Switch
As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually on
demand, the ISW-500T is especially designed to make the deployment of an industrial
network easy as it comes with a Plug and Play feature. Besides, it is stable and reliable
when it comes to fast data and power transmission.
1
ISW-500T
Low Power Consumption for Green Networking
The ISW-500T, adopting the advanced green networking technology, provides the link-on cable length power saving and link-down power saving methods.
These features make the ISW-500T consume very low power in full load operation mode, which helps conserve energy effectively but maintains high
performance efficiently.
With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE) Protocol, the ISW-500T can automatically detect cable link status and
network traffic, and thus is able to adjust power consumption accordingly. It enables the switch to consume less power when it is less active.
Dual Power Input for High Availability Network System
The ISW-500T features a strong dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) incorporated into customer’s automation
network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated
automatically to keep powering the ISW-500T via power supply 2 alternatively without any loss of operation.
12V~48V DC
12V~48V DC
12V~48V DC
DC
Active
DC
12V~48V DC
DC
DC
Active
Power
1
Power
2
Active
Power
1
Camera
Camera
PC
PC
DC
Power
2
Power Line (DC)
100BASE-TX UTP
Robust Protection
The ISW-500T provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to
improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.
High Switch Performance
The ISW-500T offers a high-performance switch architecture. With the 5 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed
throughput as high as 1Gbps and the 1K MAC address table, the ISW-500T can perform wire-speed packet transfer without the risk of packet loss. The flow
control function enables the ISW-500T to provide fast and reliable data transfer.
Plug and Play
All of the RJ45 copper interfaces in the ISW-500T support 10/100Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e
cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover
cables.
2
ISW-500T
Applications
Designed for Heavy Industries
The ISW-500T’s IP30-rated metal case is particularly designed for heavy industries, such as factories, harbors, warehouses, and more. When installed at
these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and outgoing data.
IP Camera
Internet
Printer
PLC
Media
Converter
PC
ISW-500T
100BASE-TX UTP
3
ISW-500T
Specifications
Product
ISW-500T
Copper Ports
5 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
Switch Architecture
Store-and-Forward
Switch Fabric
1Gbps (non-blocking)
Throughput (packet per second)
0.74Mpps@ 64 bytes
Address Table
1K entries, automatic source address learning and aging
Shared Data Buffer
448K bits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
ESD Protection
6KV DC
Enclosure
IP30 metal case
Installation
DIN rail kit and wall-mount kit
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Alarm
One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
LED Indicator
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Red)
Per 10/100TX RJ45 Ports:
10/100 LNK/ACT (Green)
Dimensions (W x D x H)
70 x 104 x 30 mm
Weight
255g
Power Requirements
Dual 12~48V DC, 24V AC
Power Consumption
Max. 1.1 watts/3.77BTU (Power on without any connection)
Max. 2 watts/6.86BTU (Ethernet full loading)
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3x flow control and back pressure
IEEE 802.1p Class of Service
IEEE 802.1X Port Authentication Network Control
IEEE 802.3az Energy Efficient Ethernet (EEE)
Environment
Operating Temperature
-40 ~ 75 degrees C
Storage Temperature
-40 ~ 85 degrees C
Humidity
5 ~ 95% (non-condensing)
4
ISW-500T
Diagram
Top View
DC1
V1+ V1-
Fault
1A@24V
DC2
V2+ V2-
Input
DC12~48V, AC 24V
Side View
Front View
P1
10/100
LNK
Rear View
Side View
P2 FAULT
ACT
52.00
1
2
91.00
9.00
104.00
3
4
52.00
5
ISW-500T
18.00
70.00
30.00
Bottom View
Dimensions ( unit = mm )
Ordering Information
ISW-500T
Industrial 5-Port 10/100TX Compact Ethernet Switch (-40~75 degrees C operating temperature)
Related Products
ISW-800T
Industrial 8-Port 10/100TX Compact Ethernet Switch (-40~75 degrees C operating temperature)
ISW-501T
Industrial 5-Port 10/100TX Fast Ethernet Switch (-40~75 degrees C operating temperature)
ISW-801T
Industrial 8-Port 10/100TX Fast Ethernet Switch (-40~75 degrees C operating temperature)
IGS-501T
5-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature)
IGS-801T
8-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature)
IGS-1020TF
Industrial 8-Port 10/100/1000T + 2 1000X SFP Ethernet Switch (-40~75 degrees C)
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
ISW-500T
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved.
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising