Mobile Tablet - Howard Computers

Mobile Tablet - Howard Computers
DT313H/ DT313H-MD
Mobile Tablet
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
DT313H/ DT313H-MD
BASIC OPERATION GUIDE
ENGLISH
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
INTRODUCTION
Thank you for acquiring the latest addition to DT Research’s line of tablets — the
DT313H/ DT313H-MD. Featuring a slim, robust enclosure, the DT313H/ DT313H-MD
with 13.3” TFT display is powered by the Intel® Core™ i7 processor, offering optimal
combinations of performance and power savings.
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
The DT313H/ DT313H-MD is available with Microsoft® Windows® Embedded Standard
7, Windows® 7 Professional, Windows® Embedded Standard 8 or Windows® 8.1
Industry Pro operating systems. Each software operating system features web browser,
client/ server computing software, media player, accessories, and applications support.
PACKAGE CONTENTS
This Class [B] digital apparatus complies with Canadian ICES-003.
• One DT313H/ DT313H-MD with Internal Battery Pack and Handstrap
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
• Capacitive Touch Stylus
• AC-DC Power Adapter with Power Cord
• Basic Operation Guide
Major options, depending on configuration:
• Desktop Charging Cradle with DC-in Power Jack, Video-out, Ethernet and USB Ports
• External Battery Pack and Battery Charger Kit
* If your DT313H/ DT313H-MD contains Smart Card Reader, RFID Reader or Front/Back
Camera modules, please refer to the Tablet Modules Basic Operation Guide for detailed
operation.
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
http://www.dtresearch.com
Copyright © 2014, DT Research, Inc. All Rights Reserved.
DT Research is a registered trademark or a trademark of DT Research, Inc.
ENGLISH
signage dtri com
8
BOG091514DT313HENG
DT313H/ DT313H-MD
The DT313H/ DT313H-MD
Power/Battery LED Status:
• Blue indicates the battery is 25% to 100% charged
• Blinking blue indicates the battery is charging
E
1
• Orange indicates that the battery is between 11% to 25%
2
A
• Blinking Orange indicates that the battery is below 10%
B
C
D
Precautions
• Always exercise care when operating and handling the DT313H/ DT313H-MD.
3
Battery/Power LED
• Do NOT apply excessive pressure to the display screen.
• Avoid prolonged exposure of the display panel to any strong heat source. Wherever
possible, the DT313H/ DT313H-MD should face away from direct light to reduce glare.
The DT313H/ DT313H-MD
• If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any
AC-DC adapter other than the one provided or acquired from the manufacturer or its
partners.
E
1
2
A
B
C
D
• In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power off the DT313H/ DT313H-MD and disconnect all power sources.
Report the problem to your device provider immediately.
• Never attempt to disassemble the DT313H/ DT313H-MD, as this will void the
warranty.
3
Battery/Power LED
THE DT313H/ DT313H-MD
Basic Features
Input/ Output Ports
ENGLISH
Button Functions
A
USB 3.0 Port
B
Microphone-in
1
programmable button
C
Headphone-out
2
power button
D
DC-in
3
Wi-Fi switch
E
Full-slot smart card reader
2
BUTTON
ACTION
The DT313H/ DT313H-MD wireless tablet integrates a bright and multi-touch display,
one USB port, and embedded networking elements such as wireless LAN and Bluetooth.
The DT313H/ DT313H-MD is complemented by a suite of accessories, including
battery expansion, charging cradles, and battery charger kit, for a comprehensive user
experience.
A DT313H/ DT313H-MD typically integrates an 802.11a/b/g/n wireless LAN (WLAN)
adapter that may connect to other wireless devices or access points. If your DT313H/
DT313H-MD does not come with such a network adapter, please consult your device
provider to establish the desired network connectivity
3
ENGLISH
DT313H/ DT313H-MD
OPERATION
Internal Battery
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will
Warning! !
The Internal battery pack should only be replaced by an authorized DT Research service
representative. Please contact your product and/or service provider for internal battery
be displayed after a launch sequence of several seconds. The wireless LAN connection
replacement service.
Configuring the Mobile Tablet
Powering ON and OFF
The DT313H/ DT313H-MD may be configured using the utilities and methods dictated
To activate the DT313H/ DT313H-MD, push and quickly release the Power Button. The
display will come on in a few seconds. To put the DT313H/ DT313H-MD in Standby
may take 10-15 seconds to be established.
by the software operating system. The DT313H/ DT313H-MD should be configurable for
various properties such as user profiles, network features, and several system elements.
mode, push and quickly release the Power Button. To turn the DT313H/ DT313H-MD
off for extended storage, power off safely using any software function that “shuts down
Wireless Networking
computer” provided in the software operating system.
Wireless LAN
NOTE:
The battery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT313H/ DT313H-MD when setting up for the first
time to fully charge the internal battery pack. You may charge the external
battery pack with it attached to the DT313H/ DT313H-MD, or with the optional
external battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/ replugging the AC-DC adapter to the DT313H/
DT313H-MD a few times to activate the charging process.
The DT313H/ DT313H-MD is often delivered with an embedded (user-inaccessible)
802.11a/b/g/n WLAN adapter equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the DT313H/ DT313H-MD should be
able to detect all 802.11 access points in the vicinity for you to select the access point
of your choice for connection.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT313H/ DT313H-MD
and the access points have to match. The SSID is case-sensitive and it is recommended
that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure
access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly configure
associated settings such as Authentication mode, etc.
• Refer to the access point operating manuals for setting up the 802.11 access points.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
ENGLISH
4
5
ENGLISH
DT313H/ DT313H-MD
Bluetooth
The DT313H/ DT313H-MD is with the Bluetooth module supporting Bluetooth 4.0
standard including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy (BLE), which
delivers faster speeds (up to 300 Mbps) with low power consumption.
To Hold the Tablet
Left hand: grip the left back side of the tablet
with your left hand four index fingers, with thumb
resting on the top of the back side of the tablet
Desktop Cradle
and palm securely against the back.
The DT313H/ DT313H-MD is complemented by an optional Desktop Cradle for support,
Right hand: grip the right back side of the tablet
pass-through charging, Video-out, and connection to a range of USB peripherals.
with your right hand four index fingers, with
The Cradle offers the following interfaces: a DC-in port for the AC-DC adapter, two
thumb resting on the top of the back side of the
DisplayPort outputs to support dual monitor display, an Ethernet port and USB ports.
tablet and palm securely against the back.
Always seat the DT313H/ DT313H-MD securely onto the cradle. The cradle must be
powered by the AC-DC adapter for the Ethernet and USB ports to function. The battery
packs on the DT313H/ DT313H-MD may be recharged by connecting the AC-DC adapter
directly to the DC-in port on the DT313H/ DT313H-MD or through the DC-in port on the
Desktop Cradle while the DT313H/ DT313H-MD is docked to the Cradle.
USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the DT313H/ DT313H-MD supports a wide range of USB-based
peripherals. These peripherals are applicable for software installation, applications
storage, data storage, and system software recovery and updates. DT313H/ DT313HMD is also compatible with custom mountable cradle options. These securable and
mountable cradles provide an interface to VESA mounts and arms, and to ports that may
include USB, Ethernet, and pass-through power.
Remote Management
Depending on software configuration, the DT313H/ DT313H-MD can be centrally
managed for asset monitoring and for software control. Please consult your device
provider.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research
website.
ENGLISH
6
7
ENGLISH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising