C50238T2-LED V2 - Cello Electronics

C50238T2-LED V2 - Cello Electronics
50” LED TV
50”FHD LED TV
Contents
Unpacking the TV / Accessory’s
Installing / Removing the Base Stand
1
2
Front / Right Side View and Controls
Rear View and Sockets
3
4
Remote Control
Installing Batteries in the Remote Control
Remote Control Operation Range
5-6
7
7
Making Video and Audio Connections
Connecting an AV Device with an HDMI Cable
Connecting a Computer with a VGA Cable
Connecting an AV Device with a Component (YPbPr) cable
Connecting an AV Device with a SCART Cable
Connecting an AV Device with Composite Cable
Connecting a Digital Audio Receiver
Connecting Headphones
Turning the TV on for the First Time
8
8
9
9
10
10
11
11
12-13
Basic Operation
13
OSD Menu
1. Picture Setting
2. Sound Setting
3. Channel Setting
4. Feature menu
5. Setup menu
14-20
14-15
16
17-19
20-23
24
EPG(Electronic Programme Guide)(DTV Mode)
Teletext(ATV Mode)
Digital Teletext(DTV Mode)
25
26
26
Connecting a USB Storage Device
Viewing Photos
Listening to Music
Watching Movies
Viewing Texts
Time Shift Function(DTV Mode)
Recording DTV Programme onto a USB Storage Device
Timer Porgramming
Play Recorded Programme
27
28
28-29
29-30
30
31
31
32
33
Maintenance
Hints and Tips
Display Modes
Specifications
Safety Warnings
34
34-35
36
37
38
your new 50 " FHD LED TV.
Stand
Screws(supplied)
Adapter
TV set
S aorView
F reeView
Gold care
Batteries
1
Gold care
The parts
Screws(supplied)
2x ST6 x 14
Stand
TV set
Installation
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
Put the stand to the neck of the TV set as shown below.
M6
M6
M6
M6
Attach the stand with the supplied screws.
Screws(supplied)
2 x ST6 x 14
400 400
400
M6
M6
M6
M6
400
Screw size M6x7
2
CHCH+
VOLVOL+
MENU
SOURCE
STANDBY
DTV, ATV, AV, SCART, YPBPR, HDMI1, HDMI2, HDMI3, PC, MEDIA
3
M6
M6
9
M6
M6
Headphone out
Digital
audio out
1/2/3
4
Remote Control
S aorView
FreeView
UK Sat Switch to DVB-S mode*
F reeView
Picture
Sound
Channel
Feature
Setup
5
Remote Control
S aorView
F reeView
DTV
ATV
AV
SCART
YPBPR
HDMI1
HDMI2
HDMI3
PC
MEDIA
6
7
Headphone out
1/2/3
8
Digital
audio out
9
Digital
audio out
Headphone out
Headphone out
10
Digital
audio out
Digital
audio out
Headphone out
Headphone out
11
Digital
audio out
M6
M6
M6
M6
Headphone out
Digital
audio out
M6
M6
M6
M6
5. If this is the first time you are turning on the TV and there are no programs in the TV memory, the Quick Startmenu
will appear on the screen. There are 4 setups as follow:
- 2-
-1Deutsch
language :
Germany
Country :
English
UK
Francais
France
Italiano
Italy
~
Espan
ol
Move
Enter
Ok
Exit
Spain
Exit
Move
-3The TV will automatically
switch off after the selected
time has elapsed.
This setting can also be
changed in the main menu.
Move
Ok
Exit
Exit
-4Never
Auto Power Off :
Enter
Ok
ATV
TV Connection :
Please select the method of
TV Connection.
4 Hours
Freeview
Cable
Enter
Exit
Exit
Move
12
Ok
Enter
Exit
Exit
6. Ensure your aerial, cable or dish is plugged in to the TV and
then press OK.
The TV will start to install the service you have selected.
This could take some time depending on your selected service.
You can tune an additional service at any time by pressing the
Quick Start button.
OK
Move
DTV, ATV, AV, SCART, YPBPR, HDMI1, HDMI2, HDMI3, PC, Media.
Radio
20
LOCK
Mut e
Mute
13
Cancel
Ok
Enter
Exit
Exit
Picture Setting
Allows you to set your preferred picture mode.
Picture Mode
Brightness
1. Press the Menu button and then press the
J;. T
buttons to select the
Contrast
Sharpness
Sound
PICTURE menu.
Colour
Channel
Aspect Ratio
2. Press the OK or buttons and then press the J;. T buttons to select
the following picture options and then press the OK button.
Picture Mode
Setup
Press the Ji..'f//f buttons to cycle among picture mode: Dynamic /
Standard I Mild / User and then press the OK button to confirm.
/"..
Alternative
•••
Tint
Colour Temperature
Feature
Picture Mode
Brightness
Contrast
_
You may press the Picture button once and then press
the -411 buttons to select the picture mode directly.
Sharpness
Colour
Channel
Tint
Colour Temperature
Feature
Aspect Ratio
Setup
...
Mid
Use,
Brightness
Press the -411
Contrast
Press the -411 buttons to adjust the difference between light and dark levels in the picture.(for User mode)
Sharpness
Press the -411 buttons to adjust the level of crispness in the edges between light and dark areas of
the picture.(for User mode)
Colour
Press the -411 buttons to control the colour intensity.(for User mode)
Tint (For NTSC
Press the -411 buttons to adjust the balance between red and green levels.
(Tint is only available for NTSC signal input via the SCART or AV IN.)
format)
Colour
Temperature
Press the J;,,.'f//f buttons to cycle among colour temperature: Standard /
Cool / Warm and then press the OK button to confirm.
Adjusts the colour components independently to achieve a warm or
cool.
Standard
Cool:
Warm:
Aspect Ratio
buttons to increase or decreases the amount of white in the picture.(for User mode)
Bfi
ghtness
Contrast
Sharpness
Feati.
e
Increases blue tint
Increases red tint
Colour Temperature
Aspect Ratio
Set...
Press the A T buttons to cycle among aspect ratio: 4:3 / 16:9
Full / Zooml / Zoom2 and then press the OK button to confirm.
/"..
Alternative
_
You may press the Picture button twice and then press
the -411 buttons to select the aspect ratio directly.
14
,,
Picture Setting
Input Signal 4:3
4:3
16:9
Zoom1
This selection will allow you to
view a picture with an original
4:3 aspect ratio.Black bars will
appear on both the left and
right of the screen.
This selection will allow you to
adjust the picture horizontally,
in linear proportion, to fill the
entire screen.
This selection will allow you to
zoom in the picture without
any alteration, while filling the
entire screen. However,the
top and bottom of the picture
will be cropped.
Zoom2
This selection is similar to 16:9
mode, but the picture slightly
stretches vertically and clips off
a little from the top and bottom.
Just scan
(in H DMI
mode only)
This selection will detect the
resolutionof the HDMI signal
and display an image. with the
same number of pixels
Input Signal 16:9
Im
This selection will allow you to
adjust the picture horizontally,
in linear proportion. Black bars
will appear on both the left and
right of the screen.
Im
1:0:1
This selection will allow you to
view a picture with an original
16:9 aspect ratio.
1:0:1
[JJ
60d
Im
This selection will allow you to
zoom in the picture without any
alteration, while the 4 sides of
the picture will be cropped.
This selection is similar to 16:9
mode,but the picture slightly
stretches vertically and clips off
a little from the top and bottom.
This selection will detect the
resolution of the HDMI signal
and display an image. with the
same number of pixels
Noise Reduction Press the.&.T buttons to select to reduce the noise level of the
connected device: Off I Low / Middle / High and then
press the OK button to confirm.
[Q]
1:0:1
Noise Reduction
Off
Low
Sound
Channel
Feature
Setup
3. Press the Menu button to return to the previous menu.Press the Exit button to exit the menu.
15
WJ
Sound Setting
Allows you to select an audio-enhancement technique.
Sound Mode
Bass
1, Press the Menu button and then press the A T buttons to select the
SOUND menu.
Treble
Balance
SRS TruSurround HD
SPDIF
2. Press the OK or buttons and then press the A T buttons to select
the follow ing sound options and then press the OK button.
Setup
Press the Ji..T buttons to select an audio-enhancement technique:
Standard / Movie / Music / Speech / User and then press the OK
button to confirm.
Sound Mode
-Alternative
_
Mfl':·E
ChalYICI
Feature
You may press the Sound button once and then press
the <1111 buttons to select the sound mode.
Movill
s.,.,
Bass
Press the <1111
buttons to control the relative intensity of lower-pitched sounds.(for user mode)
Treble
Press the <1111
buttons to control the relative intensity of higher pitched sounds. (for user mode)
Balance
Press the <1111
buttons to adjust the relative volume of the speakers in a multiple speaker system.
SPDIF
--
Standard
Select the spdif mode for the TV from off, PCM and Auto.
3. Press the Menu button to return to the previous menu. Press the Exit button to exit the menu.
Stereo / Dual Sound Reception (ATV Mode)
When a programme is selected,press the Sound button twice and then press the<1111
selected station.
Broadcast
On Screen Display
Mono
MONO
Stereo
NICAM STEREO
buttons to select Mono / Nicam Stereo for the
Mono sound selection
Ifthe stereo signal is weak in stereo reception,you can switch to mono by pressing the Sound button twice and then press the <1111
buttons to select Mono / Nicam Stereo. In mono reception,the clarity of sound is improved. To switch back to stereo,press the
Sound button twice and then press the <1111 buttons to select Mono / Nicam Stereo again.
Speaker Sound Output Selection (DTV Mode)
While watching a DTV programme, you can press the Sound button to display
the audio language list (only applicable when the TV programme has this
feature).
Press the Ji..T buttons to select an audio language or audio format if
available and then press the <1111 buttons to select sound track between
Left, Right and Stereo. Press the OK button to confirm and exit.
16
Allows you to set up a variety of channel options.
1. Press the Menu button and then press the
CHANNEL menu.
Channel
buttons to select the
Picture
ENTER
►
Favorite Management
ENTER
►
►
Country
UK
TV Connection
Freeview
Auto Search
ENTER
DTV Manual Search
ENTER
ATV Manual Search
ENTER
Sound
Channel
2. Press the OK and then press the
buttons to select
the following channel options and then press the OK button.
Feature
Setup
Move
Channel Management
To manage (Delete / Rename /Move / Lock / Skip) all channels.
1. Press the ▲▼buttons to Channel Managemen then press the OK button to confirm.
2.
Channel Management
A channel management screen will pop up,
Press the ▲▼ buttons to select the channel you want to edit.
Lock
Move
3.
4.
Favorite Management
To manage (Add / Delete ) favorite channels.
1. Press the ▲▼buttons to Favorite Management then press the OK button
to confirm.
2. A favorite management screen will pop up.
3.
4.
5.
17
o
OK
k
Enter
Exit
Exit
MENU
Return
►
►
►
►
TV Connection
Select DTV type, you can choose Freeview, Cable as you like.
18
ATV Manual Search
To search analogue channel by entering parameters manually.
1. Press the ▲▼ buttons to ATV Manual Search then press the OK button to confirm.
2. Select ATV manual search item to enter air channel manual search
in ATV source and the user operation interface as following.
Current Channe
Frequency
BG / DK / I / L / L’ .
3.
4.
19
Feature - Language
OSD Language
Picture
1st/2nd
Sound
1st/2nd
Channel
Feature
English
1st Preferred Subtitle
English
2nd Preferred Subtitle
English
1st Preferred Audio
English
2nd Preferred Audio
English
DTV Teletext Language
English
ATV Teletext Language
West
Setup
Move
20
o
OK
k
Enter
Exit
Exit
MENU
Return
►
►
►
►
►
►
►
Feature
Picture
4 hours after the
Sound
Lock
ENTER
Language
ENTER
Clock
ENTER
Sleep Timer
Off
Hearing Impaired
Never
Never
CI Info
4 Hour
Auto Standby
Channel
Feature
PVR/Pause TV
Setup
Move
21
OK
Enter
Exit
Exit
Menu
Return
3
22
Feature - PVR/Timeshift
Partition Select
Sound
Channel
Auto
►
►
ENTER
Pause TV Buffer
Picture
Timer
Enter
►
Record List
Enter
►
Recorder Start
Enter
►
Feature
Setup
Move
Pause TV Buffer
o
OK
k
Enter
Exit
Exit
30mins / 1hr / 2 hr.
23
MENU
Return
Setup
Picture
OSD Timer
10 Seconds
PC Steup
ENTER
Home Mode
Home
Reset TV Setting
Sound
ENTER
Software Upgrade
Channel
Feature
ENTER
OTA Upgrade
ENTER
Factory Reset
ENTER
Setup
Move
OTA Upgrade
24
OK
Enter
MENU
Return
EXIT
Exit
EPG
EPG
There are 3 modes of EPG menu:
Daily mode:
shows the information of the programs to be broadcasted
in daily mode.
RED (Weekly)
GREEN (Reminder)
YELLOW (Prev Day)
BLUE (Next Day)
Change to weekly mode.
Update the program information of the current 7 channels in the channel
list to the previous day and the start time keeps the same.
Update the program information of the current 7 channels in the channel
list to the next day and the start time keeps the same.
Weekly mode: shows the information of the programs to be broadcasted
in weekly mode.
RED (Daily)
YELLOW (Prev Day)
BLUE (Next Day)
Change to Daily mode.
If the cursor lies on the right event list, update the right event list to
display the event information of the previous day and move the cursor
to the same place in the updated page.
If the cursor lies on the right event list, update the right event list to
display the event information of the next day and move the cursor to
the same place in the updated page.
Extended mode: shows the detailed information of each program.
Extended detailed programme information can be
displayed by pressing the info button on the remote
control.
25
Teletext (ATV Mode)
Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television
programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are
listed in the teletext index.
To Turn on Teletext Function
Make sure the TV channel you are watching transmits teletext.
"No Teletext" sign will show on the screen if teletext is not available.
In ATV mode, press the TEXT button to enter Teletext mode.
Press the TEXT button three times to exit and the TV will return to the channel you were watching.
To select a page of text
Find the number of the page inthe index and enter itusing the 0-9 buttons.The number of the page will appear on the top left
corner of the screen.
The page counter will search for your page. When it finds it, the page will be displayed.
To move to the next page of text, press the •button.
To move to the previous page, press the T button.
Mix
To view a page of text while watching a TV programme, press the TEXT button twice. The text will be superimposed over the TV
programme.
Fasttext
At the bottom of the teletext screen is a row of subject headings in red,green, yellow and blue.
The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen.
Pressing one of the colour buttons will take you directly to the page corresponding to the subject heading.
Digital Teletext (DTV Mode)
Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You will need to
turn off Subtitle Function before using teletext.
Teletext within Digital Service
1. Press the TEXT button to display the teletext page. If no Teletext service is
available, a "No Teletext" message will be displayed.
2. Press the 0-9 buttons to select a page number.
3. Follow the instructions on digital teletext and move onto the next step by
pressing OK, •<1111 T, RED, GREEN, YELLOW, BLUE or 0-9 buttons etc.
4. To change digital teletext service,select a different service by pressing the
0-9 buttons or the•
T buttons.
/'..
Alternative
_
You may press the RED button to the TEXT button to display the teletext information when you see a •red logo
displayed on the screen (e.g. BBC).
5. Press the TEXT button to exit.
26
27
/ GIF / TIFF.
function: Play / Pause / Stop / Prev. / Next / Rotate / Zoom /
Info / Photo Setup / Play list.
28
WAVE / WMA / AAC / AC3 / MPEG.
function: Play / Pause / Stop / FB / FF / Prev. / Next / Goto Time /
Repeat All / Play list / Music.
AVI / MPEG1/2 / MPEG4 / WMV / H.264.
29
function: Play / Pause / Stop / FB / FF / Slow mode / Step mode / Repeat
A-B / Prev. / Next / Play list / Info / Movie Setup / Goto Time.
30
Time shift input info menu:
Information
Time shift input info menu displays as a flag of Time shift. After Time shift start this menu displays
Enter method
After Time shift start, it will display automatically.
all the time until. Time shift stop (except there is some other menu exist) .
Time shift info banner menu:
Information
Time shit info banner shows some current Time shift information.
Enter method
After Time shift start, press Info to show the menu .
Function explain :
a
Time is equal to current play time minus current recording time.
b
Progress bar is for current recording length compared with the disk free space when REC start.
The black triangular icon is for current play length compared with current recording length.
c
MB Free is the disk instantaneous free space.
d
The right red time menu has the same function with the time in info banner menu(only when info banner menu closed it showed).
Time shift info menu
Rec
REC
REC info menu
Rec
31
Time shift time menu
Timer
Timer
2. Press the ADD button enter the Time Edit menu for the channel.
Recorder
Press the ▲▼ buttons to select the Recorder On or Off.
Type
Press the ▲▼ buttons to select the Type
Channel
Press the ▲▼ buttons to select the
Duration
Date
Press the ▲▼ buttons to select the date of starting
recording, Format is day / month / year.
32
Press the SOURCE button on the TV or the SOURCE button on the remote
control then
33
34
35
36
5
1920
1080
FreeView DVBT High Definition
250
1400
127
50
93W
136
400 x 400mm/M6x7
1130x81x663 mm
1130x240x707 mm
12.3 kg
37
38
39
40
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising