Sherwood VD-5108 DVD player Bedienungsanleitung

BEDIENUNGSANLEITUNG |
Welcome to purchase Sherwood DVD players. For perfect operation and
security, read the manual carefully and keep it for future reference.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
=
- The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the userto the presence of uninsulated "
dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
* The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing)instructions
in the literature accompanying the product.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance
to rain or moisture. Dangerous high voltages are present inside the
enclosure. Do not open the cabinet.
CAUTION: To prevent electric shock, match wide blade plug to wide slot, fully insert.
CAUTION: The unit employs a laser system. To ensure the proper use of the unit, read
this manual carefully and keep it for future reference. If the unit requires
servicing, contact the seller or our service center- see "troubleshooting ". To
prevent direct exposure to the laser radiation, do not open the cabinet. In
visible laser radiation when the cabinet is opened or the interlocks are
defeated. Do not stare into the laser beams.
Use of any controls, adjustments, or procedures other than those specified
herein may result in hazardous radiation exposure.
WARNING: Any change or modification to the unit, not expressly approved by Sherwood
or its authorized parties, could void user's authority to operate the unit.
B. IMPORTANT SAFETY INSTRUCTIONS
1)
2)
3)
4)
5)
6)
10)
11)
12)
13)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A Polarized plug
has two blades with one wider than the other. A grounding-type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
This product incorporates copyright protection technology that is protected by method claims
of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
о >
осо то С
. SAFETY PRECAUTIONS === == == een се
. IMPORTANT SAFETY
INSTRUCTIONS:---..........e......
FEATURES: + +++ cov tre ven ea ona naa aran.
ABOUT MANUAL rer rennen rer
. PLAYABLE DISCS: ---..............
. TERMS FOR DISCS --.............
. BEFORE OPERATION +++ +++ 000000000008
. PRECAUTIONS FOR DISCS ++ +++ ое
PREPARATIONS BEFORE
OPERATION--- <<. --.-....….…..……..…….…...
* USE REMOTE CONTROL ------------ 7
e CHECK ACCESSORIES: ---
e FRONT PANEAL ------ Renee EEE
oo
NAMES AND LAYOUT OF REMOTE
CONTROLS ---...……
e CONNECTIONS --- --. … …. …
. BASIC OPERATIONS -------------
e PLAY DISCS -----e...ee.esneconee.
e SYSTEM SETTING ++ +++ cov ven cen …
© PAUSE ‘++ «vv crv crn ern ran Kar evn eae ene ens
e VOLUME CONTROL --------- ==. eee.
* DVD MENU PLAY --- +c cen vee ee nen een
e PBC PLAY --------- -=- ea 0000 ARE KR wen
* SELECT WITH NUMBER
BUTTONS -----=.ee.....eneccaneoo.
. PLAY DISCS IN
VARIOUS WAYS --- ... ...... 2. eee...
e AUDIO MODE --------.........….….….….
OP 18
-19
19
- 19
FAST PLAY -ccccccrremeecanneann
SLOW PLAY --- +10 000000 eee ca nas aan san ae
REPEAT PLAY -------<=e..e.0....
SELECT SUBTITLES----......
SELECT ANGLES ++ c++ cer ver ven ns
TIME SEARCH
AND REMAINING TIME:-----------
RESUME PLAY: +++...
ZOOM PLAY ---........ec.0000erevererece.
PROGRAM PLAY --............
SHUFFLE PLAY ---------==eee...
DIGEST PLAY ------000000 00e see nan ne
L. FUNCTION SETTING
MENU SETTING ----....... eee...
SPEAKER SETUP: «++ vv ven ver nen
M. MP3 OPERATIONS --------. +...
N. OTHERS--- --- --- cov eevee en
< TROUBLE SHOOTING --- vee wee
e TECHNICAL SPECIFICATIONS
23-25
C.FEATURES
1. OUTSTANDING
SOUND QUALITY
Dolby Laboratories and DTS Kms
developed by DTS Inc., features high
quality surround, can be played in DVD or
CD disc at home, reproduce high quality
sound effects.
2. HIGH DEFINITION
The unit adopts MPEG2 coding format and
brings the horizontal resolution over
500 lines.
3. UNIQUE FUNCTIONS
Multi-angle and multi-language bring
unique trick functions.
Parental lock makes it easy to control the
content of discs.
4. SCREEN
Ordinary screen and wide screen (16:9)
are available.
5. COMPATIBILITY
The unit can play DVD, VCD, CD-R and
CD-RW, CD.
6. ZOOM
It can enlarge pictures,twice or four times as
big.
7. 9-PICTURE DIGEST
It can look through the content of discs and
select to play.
8. MULTI-FUNCTIONS
Fast forward, fast reverse, slow play,
frame play , repeat play and program play.
9. TIME SEARCH
It can search a specific part on a disc,
especially good for watching fiction
movies.
10. RESUME PLAY
It can memorize the position where the disc
is stopped and resume playback.
11. CONTENT DISPLAY
It adopts colored fluorescent display and
English OSD, makes the disc content
clearer.
12. VIDEO OUTPUT
Standard video, S-video signal output
mode and easy system change.
13. AUDIO OUTPUT
5.1 channel, stereo analog audio output and
optical, coaxial digital audio output, can be
connected with any amplifier to enjoy high
quality sound effects.
D. ABOUT MANUAL _
PRINCIPLES FOR WRITING
* This manual mainly introduces how to
use the buttons on the remote control. MARK INDICATION
* You may operate the unit if the buttons
on the unit have the same or similar PD, functions of DVD
names as to those on the remote
control. VCD functions of VCD
* The marks shown in the right chart are
CD
used in the manual. ( CD ) functions of CD
e "(9)" may appear on the TV screen
during operation. This icon means the
function explained in the owner's
manual is not available on that disc.
TYPE MARK CONTENT SIZE PLAYING TIME
approx. 2hrs (single-side disc)
2 12cm —
DVD DVD audio+video approx. 4hrs (double-side disc)
(motion pictures) approx. 80mins (single-side disc)
gem approx. 160mins (double-side disc)
COMPACT Co 12cm approx. 74mins
Ш © audio+video
VCD IS clot
(DIGITAL VIDEO) (motion pictures) 8em approx. 20mins
approx. 74mins
CD CD-R IS SE audio 12cm PP
CD-RW Ш a 8cm approx. 20mins
MP3 — audio 12cm 600mins
Note: 1. Region codes for DVD disc are printed on the rear panel, only the disc with same
code can be played.
* TITLE |
The images or music of a DVD are divided
into some units, among which title is the
biggest one.
To a image in video software, title is movie;
to a piece of music in audio software, it is
music.
Each title has a number which makes it
easy to search.
* CHAPTER
lt is smaller than title among the units
of a DVD. A title is made up of several
chapters, and each chapter has a number
for search. But some discs may not have
numbered chapters.
* TRACK
The image or music ina VCD or CD. Each
track has a number for search.
STRUCTURE OF DVD
DISK
CHAPTER
STRUCTURE OF VCD
AND CD
DISK
-« >
« SCENE
The menu pictures, motion and motionless
pictures of a VCD with PBC function can be
divided into some parts, these parts are
scenes. Each scene has a number for
search. |
. PBC (PLAYBACK CONTROL)
It is the signal recorded in a VCD2.0 to
control playback.
DISC TYPE FUNCTION
VCD 1.1
without PBC Enjoy music and images
(PLAYBACK (motion pictures)
CONTROL)
Besides the images
of VCD1.1, play
VCD 2.0 interactive software with
with PBC the menu picture shown
on the TV screen (PBC
(PLAYBACK play) . If the disc has
CONTROL) motionless pictures,
high-resolution playback
is also available.
SAF ETY
Before operation, check if the voltage of
the unit is in line with the local voltage.
Hold the plug to disconnect it from the
mains outlet. Do not pul the power cord.
When the plug of the unit is connected to
the mains outlet , the unit will be still
connected to AC even if the power is
turned off.
Disconnect the plug as soon as liquid or
* Use the unit in a humid place. In these
cases, the unit can not work. Unload the
disc and leave the unit on for about
one hour tc evaporate the water.
CLEANING
e Use soft cloth with a little neutral
detergent to wipe the cabinet, panel and
controls. Never use abrasive paper,
polishing powder or solvent like alcohol
and gasoline.
objects enter the unit. The unit can not be
used until being checked by experts.
* Do not open the cabinet for laser rays HANDLING DISC
employed by the unit may damage eyes. * To keep the disc clean, do not touch
Any servicing should be done by qualified the play sides of the disc.
service personnel. * Do not attach paper or tape to the disc.
PLACEMENT
Put the unit where ventilation Is good
enough to prevent overheating.
* Never put the unit in direct sunlight or near
heat sources.
e Put the unit horizontally, never put any
heavy object on the unit.
* To protect the laser, do not put the unit
where there is most dust. If there is dust
on the laser, use a cleaning disc to clean it. playback.
o Refer to the operation instructions of
CLEANING DISC
a Before playback, wipe the disc outwards
from the center with clean cloth.
* Keep the disc away from direct sunlight
or heat sources.
e Store the disc in a disc case after
the cleaning disc you bought.
CONDENSATION
Water will appear on the pickup lens in
the following cases:
* The unit is suddenly moved a cold place to
a warm place.
e The unit is put in a room with a heater, or
in the cold air from a air-conditioner.
* Do not use any type of solvent such as
thinner, benzine, commercially available
cleaners or anti-static spray.
|. PREPARATIONS BEFORE OPERATION
This part introduces the work to be done before operating the unit.
USE REMOTE CONTROL
1. Open the battery cover.
2. Insert two AAA batteries, make sure to
match "+" and "-" of the batteries to
marks inside the battery compartment.
4. Point the remote control at the remote
sensor, operate in the range of 5 meters and
30° from the front of the remote sensor.
Make sure there is no barrier between them.
Notes:
1. Batteries can last about 6 months
generally.
Change the batteries if the remote control
does not work.
2. If the remote control is not used for a long
time, remove the batteries to prevent battery
leakage.
CHECK ACCESSORIES
Check if you have all the accessories after
the carton is opened.
* Audio cord 1
* Video cord 1
» Remote control 1
e AAA batteries 2
e Owners manual 1
Manufactured under license from Digital Theater Systems, Inc.
FRONT PANEL
DVO PLAYER VD-5108
DVD /VvCD/ MP3 /CO/COR/COR W PLAYER
11 10 9 8 7 6 5
(1) POWER @ PAUSE
@ DISC TRAY PLAY
@ OPEN/CLOSE @ DISPLAY
(® SEARCH STANDBY INDICATOR
(5) PREV/NEXT @ REMOTE SENSOR
(6) STOP
|. PREPARATIONS BEFORE OPERATION
Program indicator
ne Co h | Dolby digital Repeat play
CD indicator Pause indicator Title indicator С apter rack Ange ator indicator Track calendar
Play indicator | PBC indicator ip in indicator! Lock indicator
/ > N
TITLE |CHP/TRK PROGRAM (CO DC REPEAT
|| — PBC “REMAIN OH CI DIGITAL [ ONE | 1121314;
N — A y 5/60/1718
re HR EE oo go” gro
SP LC Pd Ld resume (3114115116
| LT TT
Ne J
Minute Second
indicator indicator
DVD indicator Title/chapter/track Hour Resume
indicator indicator indicator
Push {DIMMER |, the brightness of the display is reduced by half; push it once more, the
display becomes dark. Push the button again, the display resumes brightness.
REAR PANEL
— COAXIAL
= x ne
00000 n J
SUB WOOFER R S-VIDEO
SCART CONNECTOR
7 8 5
O 5.1 CHANNEL AUDIO OUT (® SCART CONNECTOR
E) MIXED AUDIO OUT (® OPTICAL OUT
® VIDEO OUT @ S-VIDEO OUT
(® COAXIAL OUT POWER SUPPLY CORD
NAMES AND LAYOUT OF REMOTE CONTROLS
—
o co Y SU 4
10
11
12
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
13
@ OSD
@ DIMMER
@ NUMBER BUTTONS
@ FF/FR
® SET UP
© TITLE
@ PLAY
PREVIOUS/NEXT
© STOP
DIRECTIONS
M SYSTEM
@ VOLUME
(3 LANGUAGE
MUTE
@ SUBTITLE
AUDIO MODE
( A-B REPEAT
REPEAT
RETURN
69 MENU
2) PAUSE/STEP
@ SLOW PLAY
@ ZOOM
REMAIN
@ RESUME
TIME SEARCH
@ DIGEST
PLAY MODE
@ ANGLE
POWER
6) REMOTE TRANSMITTER
.10-
CONNECTIONS
Turn off all the equipment before operation.
The unit has many kinds of output modes like A/V output, S-VIDEO output, digital signal output
(OPTICAL, COAXIAL). You may select as you need.
CONNECTED TO A TV Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
Confidential Unpublished works. ©1992-1997
Dolby Laboratories, Inc. All rights reserved.
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
5.1 CHANNEL
CENTER y FRONT
00000
2 OOK
MIXED
—— COAXIAL
OPTICAL
sus WOOFER S-VIDEO
SCART CONNECTOR
Luz EEE EEN ESCENAS =
ED EE EE EE EE EEE EE EE A Bm wd my AAA A A EA me mh = = =
. If the TV is equipped with SCART connector, connecting to the connector allows
you to enjoy high quality picture playback.
. Set the unit. You have to set the unit according to the TV to be connected.
* |f the system of the TV is PAL, press and select PAL.
e If the system of the TV is NTSC, press | SYSTEM | and select NTSC.
e |f the system of the TV is multi-system, press | SYSTEM | and select MULTI.
* Connect the unit to a wide-screen TV.
Set the "TV DISPLAY" to "WIDE" in the function setting column.
* Connect the unit to an ordinary TV.
Set the "TV DISPLAY" to "NORMAL/PS" or "NORMAL/LB" in the function setting column.
„11 -
|. PREPARATIONS BEFORE OPERATION
CONNECT TO AN ORDINARY AMPLIFIER
VIDEO IN
5.1 CHANNEL MIXED
CENTER SURROUND FRONT — COAXIAL
OOO OT
————];—;———]———]]]]]
0000000 |__|
SUB WOOFER
S-VIDEO
| SCART CONNECTOR
où
|
|
T— | Ш
|
,Ç TE ges
НЙ
AUDIO IN L o
R L | | | |
© ооо mm E)
le Ц!
* Set the "DOWNMIX" in "SPEAKER SETUP" in the function setting column correctly.
CONNECT TO AN AMPLIFIER WITH DIGITAL SIGNAL INPUT
When playing CD with DTS encode,
= === big noise will be output. To avoid
damage of system, customer must
pay attention to it before connecting
analog stereo output of DVD to
(— AMP. If you enjoy DTS digital
scaRT coMECTOR surround, 5.1 channel DTS digital
surround decoder system must be
connected to Digital Out of DVD
— | © [oma | player.
i I I ‚ | COAXLAL IMPUT ;
La
e Set the "SPDIF" in "GENERAL SETUP" in the function setting column correctly.
. 12 -
CONNECT TO AN AMPLIFIER WITH 5.1 CHANNEL SURROUND SOUND
CENTER SURROUND FRONT
L El
O
Qs
© © | FRONT SPEAKER
REAR SPEAKER(R)
(A)
\
SCART CONNECTOR
© ©
CENTER SPEAKER
SUBWOOFER FRONT SPEAKER(L) © ©
(ACTIVE)
REAR SPEAKER(L)
|. PREPARATIONS BEFORE OPERATION |
CONNECT TO AN AMPLIFIER WITH 5.1 CHANNEL SURROUND SOUND
1. Some discs with Dolby or MPEG
AUDIO recorded 5.1 channel track.
When connecting a amplifier with 5.1
channel input terminal and 5(+1)
speaker, you can enjoy more realized
sound effect at home.
"5 channel " means 2 front speakers
(L/R), 2 rear speakers (L/R) and a center
speaker. 0.1 means bass speaker output
bass. Even if there are no 5(+1)speakers,
the unit will output signals to each
speaker.
Note: A DVD disc with MPEG AUDIO
format recorded 7.1 channel
soundtrack, the output signal will be
incorported to 5.1 channel.
2. SPEAKERS SETUP
To obtain perfect surround sound, following is
recommended:
a. Use high quality speakers.
b. Use rear and center speakers to match
with front speakers (in size and preformance).
c. If possible , set the bass speakers between
two front speakers(L/R).
Note: Distance between center speakers and listen-
ing location, and distance between
rear speakers and listening location
should shorter than the distance
between front speakers and listening
location.
Do not insert the power cord to outlet or switch POWER
button before finishing connections.
. 14 -
TV/AUDIO SELECTION
Press on the TV and audio system.
1. Press "TV/VIDEO" onthe TV, select
VIDEO mode (TV).
TV/VIDEO
*e Select S-VIDEO mode to connect
to S-VIDEO. (if available)
2.Select the correct audio input on
the amplifier.
e Each amplifier is different from another,
please refer to the manual of the amplifier.
(e.g., connect the audio output of the DVD
player to the DVD audio input of an
amplifier.)
EC
© © © ©)
DVD/LD
Notes: This step can be cancelled if you do
not connect it to the amplifier.
. 15 -
1. Press POWER) to turn on the unit.
2. Press A to open the disc tray and load a
disc with the label side up.
OPEN/CLOSE
3. Press A again to close the disc tray. The
unit begins to read the disc.
4. Press » (PLAY) to play the disc.
AFTER STEP 4 |S FINISHED:
e PLAY DVD
The TV screen shows DVD menu and
title menu.
e PLAY VCD2.0
The TV screen shows the menu, the
unit enters PBC status.
e PLAY CD, VCD1.1
Press » (PLAY), the unit plays the
disc according to the track numbers.
5. Stop playback.
Press Ш.
UN
J.BASIC OPERATIONS |
6. Remove the disc and cut off the unit. PAUSE «PP... DPD,
e You have to press this button twice to Press II /STEP
stop the playback of a DVD disc.
SS
PP
r РО),
SYSTEM SETTING 2”. VCD, 3325| STEP
According to the system of the TV to be 2222
connected, set the system of the unit to make
it match the TV.
* WHEN PLAYING PICTURES
If the pictures of DVD and VCD
are played, press ¡HH /STEP! to make
playback pause. The unit enters step play
status. Press II /STEP| again, the unit
plays a frame forward.
SYSTEM
CD
1. If the system of the TV is PAL:
Press| SYSTEM |, select PAL.
The screen shows: STEP
PAL
2. If the system of the TV is NTSC: * WHEN PLAYING MUSIC CD
Press |SYSTEM|, select NTSC.
— Press ¡II /STEP! to make playback
The screen shows: bray
pause.
NTSC Press » (PLAY)to resume playback.
) DVD VCD CD
3. If the TV is multi-system, press OSD DD. II CO
SYSTEM |, select MULTI. When the OSD is pressed, the TV screen
shows the operation functions and
information about the disc.
MULTI
OSD 55562
CORY
QQ)
© С © ©
Notes: SYSTEM button works only with SHEE
EEO
DVD and VCD discs. =535
. 16 -
Press to select:
—— OSD > OFF ——
VOLUME CONTROL
DVD, | (VCD, CD,
* Press on the TV or amplifier to
adjust the volume.
* Press | VOLUME |on the remote control.
VOLUME+,-
1. Press + to raise the volume.
+
2. Press - to lower the volume.
a
.17-
DVD MENU PLAY <>
some DVDs have title menus and chapter
menus.
Press » (PLAY), the screen shows the menu.
Press »»| ог |<« to see the next or previous
page, select with number buttons and
direction buttons.
Example: select track 13.
1. Press »»| to enter the next menu.
2. Press number buttons to select direcltly.
> A
You can also do as follows:
1. Press Y to select track 13.
2. Press » (PLAY) to start playing track 13.
Press| TITLE | once to return to the title menu.
Press | MENU lonce to return to the root
menu.
PBC PLAY <a
When playing a VCD2.0, you can enjoy
the basic interactive function, Example:
VCD2.0
1. Press » (PLAY), the screen shows the
home menu.
SELECT
2. Press number buttons to select.
Example: select home menu 1.
1
SELECT 01
3. The screen shows the sub-menu
after the unit enters home menu 1.
4 ÓN
1. Penemarunooneeneaaner.
D Locrrssrereeseensenre
CS
4. vastamorenenoraccocae
N > и
4. Ргез5 |«<« or »»| to see the
previous or next page.
5. Press number buttons to select sub-
menus.
J
Example: Press number button 5, the unit
plays track 5.
6. Press RETURN! to return to the sub
menu, press it again to return to the home
menu.
SELECT WITH NUMBER
BUTTONS YD, O,
Load a disc. Press number buttons to select
tracks after the unit finishes reading the disc.
1. If the track number is less than 10, just
push buttons 1-10.
Example: push 8 to select track 8.
8
The screen shows:
TRACKOS 00:21
2. If the track number is over 10, press + 10
once and a button among 1-10.
Example: if you select track 12, press +10
once and button 2.
e
The screen shows:
TRACK12 00:00
. 18 -
K. PLAY DISCS IN VARIOUS WAYS
AUDIO MODE
(DVD, | VCD, CD,
* You may select a needed language from a
multi-language DVD.
* You may select the right channel or
left channel or stereo from a multi-channel
CD or VCD.
So AUDIO MODE
ОО ве CD
SE D S
LANGUAGE
CD
— À
* Press | LANGUAGE |, the screen shows
orderly:
AUDIO 1/2:AC-3 5.1CH
CRE
CE
AUDIO 2/2:AC-3 5.1CH
Different discs differ in languages.
. 19.
WHEN PLAYING veD ORCD
AUDIO MODE > LEFT A В
AUDIO MODE
a = =
AUDIO MODE
7 (Fe)
You may select one mode.
Notes:
* Different discs differ in languages.
* As to a two - language fiction VCD, you
may press | AUDIO MODE | to select a
needed language.
MUTE (DVD, | VCD, CD,
When playing a disc, this function can
remove the sound.
1. REMOVE SOUND
Press IMUTE |, the screen shows
"MUTE".
a a. " UTE |
2. RESUME SOUND
Press |MUTE again, the screen
shows "MUTE OFF".
FAST PLAY — 25.93.
When playing a disc, you may play it forward
fast or reverse it fast to find what you want.
TA E NT pan reg ет TNT NE BL La
E TAFE CES Тя ет CAE EFE 3 Tf
: = E ния pm EU EFE hos EL
1. Press »» to play forward fast. Each time
you press the button, the screen shows
orderly:
> OFF 2X
© FF 4X
© FF 6X
@ FF 8X
— O PLAY
FF
©
2. Press «« to reverse the disc fast. Each
time you press the button, the screen
shows orderly:
> © FR 2X
FR ® FR 4X
® FR 6X
@ FR 8X
—— © PLAY
3. Press » (PLAY) to switch to normal play
while FF or FR playing.
1. When playing forward fast, press >>, the
screen shows orderly: |
— OFF 1X
FF OFF 2X
® FF 3X
@ FF 4X
O PLAY
2. When reversing the disc fast, press << ,
the screen shows orderly:
—— DO FR 1X
FR @ FR 2X
O FR 3X
@ FR 4X
— © PLAY
3. Press » (PLAY) to play normally when
playing fast.
4 When playing CD,there is only three speeds.
SLOW PLAY 5.5
Enjoy slow motions by the following
steps.
SLOW
The screen shows orderly:
. 20 -
K.PLAY DISCS IN VARIOUS WAYS
—> SF 2X—> SF 4X—> SF 8X
——PLAY<«— SR 8X«+-SR 4X «SR 2X
2.Press » (PLAY) to play normally.
1. Press » to play Slowly. The unit has
three steps for slow play.
The screen shows orderly:
—— D SF 1X
SLOW @ SF 2X
® SF 3X
—— (4) STEP BWD
2.1n the STEP BWD MODE press PAUSE
key,then skip backward.
3. Press » (PLAY) to play normally.
REPEAT PLAY
DVD, , VCD, CD,
This function can be used to repeatedly play
a title, chapter, track, disc, or some part on a
disc.
REPEAT
‚21.
PLAYING A DISC REPEATEDLY ~~ ~~
Ш DVD
You may repeat a title or chapter.
1. Repeat a chapter.
Press | REPEAT |, the screen shows
REPEAT
= CHAPTER REPEAT ON
2. Repeat a title
Press |REPEAT |, the screen shows
REPEAT
a
3. Remove "REPEAT" function.
Press | REPEAT] until "REPEAT OFF"
appears.
TITLE REPEAT ON
Ш VCD, CD
e You may repeat a track, a disc according to
the following steps.
e VCD 1.1 and CD can play repeatedly
directly. VCD 2.0 can play repeatedly in
PBC OFF mode.
PBC OFF
e After the unit stops, press number buttons
directly to select tracks.
1. Repeat a track.
Press| REPEAT |, the screen shows
"REP- ONE". The unit plays the
current track.
REPEAT
Ra REP- ONE
2. Repeat a disc.
Press 'REPEAT |, the screen shows
"REP- ALL". The unit plays all the
tracks on the disc.
REPEAT
Ra REP- ALL
3. Remove "REPEAT" function.
Press | REPEAT till "REPEAT OFF "
display on TV screen.
You may press to enjoy some parts
repeatedly when playing a disc.
EN PLAY DVD,VCD or CD.
1. Set a starting point A.
The screen shows:
A-B
e
2. Set an end point B.
The screen shows:
ATOBSETA
A-B
A АТО В ЗЕТ В
Afterwards, the unit plays from A to B.
3. Press again till "A TO B
CANCELLED" appears.
SELECT SUBTITLES ¿5
When playing a multi-subtitle DVD, you
may select one subtitle to show it on the
screen.
SUBTITLE
ED
1. Press | SUBTITLE | to select one.
The screen shows:
SUBTITLE
= SUBTITLEO1/03
2. Remove the subtitle.
Press| SUBTITLE | until the screen
shows "SUBTITLE OFF".
Notes:
* For some discs, subtitles can not be
removed. , |
* Different discs differ in the language
of subtitles.
* If the subtitles of discs can not be
selected, press | SUBTITLE |, the screen
shows "SUBTITLE OFF".
K. PLAY DISCS | N VARIOUS \ IAYS о REE
SELECT ANGLES 5
Some discs have images with different
screen angles, you may select among them.
For example, when you watch a running
train, you may watch it from the front, the left
window or the right window without stopping
it.
00:0:0-0-0-0:
0:0:0:0-0-0-01
0:0:010-0-0-08
6800005
Example:
A DVD has four screen angles at your
option. |
1. Press 3 to select ANGLE1.
SCREEN
1/4
2. Press Sy to select other angles, the
screen shows respectively:
2/4 (select ANGLE2)
3/4 (select ANGLE3)
4/4 (select ANGLE4)
. 23.
TIME SEARCH
AND REMAINING TIME
VCD CD
AVE, LIES LCE
TIME SEARCH
REMAIN
CHEER 0-0-0-Oee
0006005
SS
Oo
Oo
OD
DO
Do
So
You may directly enter a time, title or chapter
number to search fast on a disc, the unit
plays from that point.
EN PLAY DVD
1. Search a title or a chapter.
Example: Search chapter 2 in title 6.
Press [TIME SEARCH |, the screen shows:
TITLEO3/30 CHAPTER 000
E /004
* Press the left or right button and move
the cursor to illuminate the title number.
The screen shows:
TITLE 03 /30 CHAPTER000/004
? Press button 6 to select title 6, the screen
shows:
TITLE 06 /30 CHAPTERO000/004
* Repeat the steps above, select chapter 2
in title 6.
K. PLAY DISCS IN VARIOUS WAY
1.Press | REMAIN | , the screen shows
* Press |TIME SEARCH| until the screen the remaining time of the title.
shows:
REMAIN
TIME - | 00:56:45
© TITLE REMAIN
e Press number buttons to enter hour, minute
and second. 2. Press [REMAIN | again, the screen shows
Example: Enter 0,1,0,2,3,8 time of the chapter.
After setting, the unit plays the disc from 1:02:38.
REMAIN
00:01:02
Ш PLAY VCD, CD E CHAPTER ELAPSED
To jump to a specific time, use
| TIME SEARCH |to set the time for the 3. Press [REMAIN | third time, the screen
desired location. shows the remaining time of the chapter.
Example: Play from 00:01:38 of track 6.
1. Press button 6 to select track 6. REMAIN 00:05:58
The screen shows:
= CHAPTER REMAIN
ТВАСКОб 00:00
4. Press |REMAIN | fourth time, the screen
resumes to normal play mode.
E VCD, CD
Example: Check the remaining time
when playing track 2.
3. Press button 0,1,3,8 to enter the time. 1.Fress [REMAIN], the screen shows
the remaining time of the track.
2. Press | TIME SEARCH |, the screen shows:
ТКАСКОб
GOTO __:
The screen shows:
TRACKO6 f a
GOTO 01:38 TRACKO2 04:23
SINGLE REMAIN
[he unit plays from 00:01:38 of track 6 after
setting.
Press 10/10! to enter O.
N J
e used to know
the remaining time of a title, chapter, track or
a disc.
. 24 -
2. Press REMAIN | again, the screen
shows the remaining time of the disc.
K. PLAY DISCS IN VA
TRACKO2 33:23
TOTAL REMAIN
3. Press| REMAIN|once more, the unit
resumes to normal playback.
RESUME PLAY
(DVD, | (VCD, | (CD.
The unit can memorize the last point
where it stops and resume playback from
there.
1. Press [STOP] to stop playing.
2. Press [RESUME] to resume playback.
RESUME
Notes: `
1. This function can not work in SHUFFLE
mode.
2. The recorded location is erased when the
disc is changed or when the power is
turned off.
. 295.
ZOOM PLAY CS CD
This function can be used to watch a
motion or motionless picture.
(80 0-0-0-Os
0200:0-0-0-01
01 0E0-C-0-08
OEPrOLOFONOSan
ZOOM
* DVD/VCD
1. Press | ZOOM | during playback,
the screen shows:
4 в
ZOOM X2
N
The picture is enlarged two times.
2. Press {ZOOM | again, the screen shows:
4 \
ZOOM X4
\ J
The picture is enlarged four times as big.
3. Push <, A, Y, > to move the enlarged
picture.
4. To resume the picture, push | ZOOM
until the screen shows "ZOOM OFF".
PROGRAM PLAY
You may program the tracks on a disc and
play them in the programmed order.
WHEN PLAYING DVD,VCD or CD
1. After the unit stops, push | PLAY MODE | to
select.
DU
:
Ë
00»070-0-0-0
020:0:0-0-0-01
ONOFOLO-0-0-08
ORO:OFOJO:
PLAY MODE
©
The screen shows:
PLAY MODE
4
2. Use the 4 , Y buttons to select PROGRAM
and press » (PLAY) to confirm.
AY PROGRAM
SHUFFLE
No
J
3. Use the number buttons to enter the titles
(or chapters) to be programmed and press
(PLAY) » to confirm, according to the
screen.
Example: If you want to program
title 2,4,6,8, you should press [2], then
[PLAY], then [4], then [PLAY], ...
4. Press » (PLAY) to start playing the disc
according to the program order.
5. Remove program play.
* When playing a DVD disc, press
twice.
* When playing a VCD or CD disc,
press NN.
- 26 -
SHUFFLE PLAY
The unit can play by random orders.
The order is different each time.
1. Press || to stop playing.
You need to push the button two times
for a DVD.
2. Press| PLAY MODE | to select shuffle play
mode.
PLAY MODE
©
The screen shows:
Г )
AY PROGRAM
SHUFFLE
No |
3. Use Y, A to selsct SHUFFLE and press
> (PLAY) to start shuffle play.
4. Remove shuffle play.
Press IN twice.
DIGEST PLAY 25.5.
This function can be used to look through
the content of the track or a disc.
DIGEST
Ci: 06 0-0-0-Us
0:0:0:0-0-0-Uf
OIO:OR0-0-0-0F
‚27.
PLAYINGDVD
1. Press| DIGEST | after the unit stops.
DIGEST
E
The screen shows:
DIGEST
The unit begins to look through the titles (or
chapters), and shows the starting picture of
each title (or chapter) on the screen.
1 2
8 9
7 6 5
со
т
Each раде has nine pictures, their location
may be different. |
2. Press |44 , »»| to look at the previous
or next page.
next page
previous page
3. Remove digest, Press MM twice.
PLAYINGVCD,CD
1. Press | DIGEST [after the unit stops.
DIGEST
©
The screen shows:
( D
1. INTRO
2. DISC DIGEST
3. TRACK DIGEST
4. EXIT
NN ”
2. Press number buttons to select a digest
mode.
* Press button 1 for intro mode.
1
©
The unit plays the first ten seconds of each
track one after another.
* Press button 2 for disc digest.
2
©
The unit shows the starting picture of all
the tracks on the screen simultaneously.
If the track number is more than 9, press »»|
to view the next page.
Press number buttons to select a track.
* Press button 3 for track digest.
3
E
Press »»| to select a track.
Example: You may select »» to look
through track 3, the screen shows:
|«« DIGEST TRACK3 »»
The unit divides track 3 into nine parts
and shows the starting picture of each
part on the screen.
* Press button 4 to exit from digest play.
3. Remove digest play.
Press [STOP |, digest play is removed and
the unit stops.
“>
Notes: A CD only has "INTRO" function.
. 28.
MENU SETTING | VD, . CYCD,. CCD,
According to the recorded information and
external equipment,set the following
functions for the player to obtain the best
playing status.
0:0:0-0-0-08
020:0:0-0-0-08
CO OHO}OLOÏOI
0.1070 0702020.
SETUP
1.Press| SETUP | to set the main menu.
SETUP
X
The screen shows:
a SETUP MENY = MAIN PAGE \
> (GENERAL pa
> SPEAKER SETUP
» DOLBY DIGITAL SETUP
» PASSWORD SETUP
» PREFERENCES
EXIT SETUP
N _/
2. Press direction buttons ( » , A) to select and
press » (PLAY) to confirm.
Example: Select"DOLBY DIGITAL SETUP"
* Press direction button Y to select.
The screen shows:
(SETUP MENU -- MAIN PAGE
» GENERAL SETUP
> SPEAKER SAUT
> PREFERENCES
EXIT SETUP
N —
* Press >» (PLAY) to confirm and enter
"DOLBY DIGITAL SETUP ". The screen
shows the submenu for your selection.
. 29.
The screen shows:
rs
-- DOLBY DIGITAL SETUP --
STEREO
DUAL MONO | >> |LEFT MONO
DYNAMIC RNG RIGHT MONO
5.1 CHANNEL MIXED MONO
» MAIN PAGE
\.
Press direction button » , ¥ to select
"LEFT MONO"
The screen shows:
>
(
-- DOLBY DIGITAL SETUP —
Ta |
DUAL MONO >> ЕЕ NO
DYNAMIC RNG RIGHT M MONO
5.1 CHANNEL MIXED MONO
> MAIN PAGE
\-
* Press » (PLAY) to confirm.
Set "DUAL MONO" in "DOLBY
DIGITAL SETUP" to "LEFT MONO".
3.Exit from menus.
Press direction buttons and » (PLAY) to
select the relevant exit column.
e Press the direction buttons A .< to exit
from "DUAL MONO".
e Press the direction button Y to select
"MAIN PAGE", press» (PLAY) to exit
from the current column and return to the
main menu.
The screen shows:
ДИ
ETUP MENU -- MAIN PAGE )
» SPEAKER SETUP
» DOLBY DIGITAL SETUP
» PASSWORD SETUP
> PREFERENCES
EXIT SETUP
Ne J
e Press A , Y to select "EXIT SETUP", then
press » (PLAY) to exit from the menu.
The setting structure is as follows:
GENERAL SETUP PAGE
— TV DISPLAY >> NORMAL/PS
NORMAL/LB
WIDE
— SCART FORMAT >> RGB OUTPUT
S-VIDEO
— TV TYPE >> MULTI
NTSC \
PAL
— ANGLE MARK >> ON
OFF
— SPDIF >> OFF
SPDIF/RAW
SPDIF/PCM
— CAPTIONS >> ON
OFF
— SCREEN SAVER >> ON
OFF
— MAIN PAGE
Ш TV DISPLAY
1. NORMAL/PS
This is selected when the unit is connected
with a normal TV.
Wide-screen images are shown on the
screen, but with some parts cut automatically.
2. NORMAL/LB
This is selected when the unit is connected
with a normal TV. Wide-screen images are
shown on the screen, with black belt on the
top and bottom.
3. WIDE
This is selected when the unit is
connected with a wide-screen TV.
Bl SCART FORMAT
1. RGB OUTPUT
When you select this, you should connect
the unit to the TV with SCART connector.
2. S-VIDEO
When you select this, you should connect
with S-Video.
. 30 -
L. FUNCT! ON SE г
lB TV ТУРЕ
You may select according to the color
system of the TV to be connected.
e Select "MULTI" for a multi-system TV.
e Select "NTSC" for a NTSC TV.
e Select "PAL" fora PAL TV.
Ш ANGLE MARK
This only works when there is an angle
mark on the disc.
e Select "ON", the screen shows the mark
when playing DVD .
e Select "OFF", the mark is not shown.
Bl SPDIF
* SPDIF OFF: No signal is output from the
optical or coaxial port.
e SPDIF/RAW: Select this when the DVD
player is connected with a power amplifier
through optical or coaxial port. When a
Dolby Digital disc, DTS disc or MPEG disc
are played, theoptical or coaxial port will
output in the corresponding digital (Source
code) format. The power amplifier to be
connected must have Dolby Digital, DTS
and MPEG decoding.
* SPDIF/PCM: Select this when the DVD
player is connected with a 2-channel digital
mode or stereo amplifier. When a Dolby
Digital or MPEG disc is played, the optical
or coaxial port will output in PCM 2-channel
format.
Bl CAPTIONS
* ON
The hidden subtitle is shown.
* OFF
The hidden subtitle is turned off.
E SCREEN SAVER
Start the screen saver, the screen saver
image appears when the unit stops or the
image is freezed for a few minutes. This
saver can keep the screen from being
damaged.
* ON: Start the screen saver.
a OFF: Remove the screen saver.
. 31.
SPEAKER SETUP
— DOWNMIX >> LT/RT
STEREO
VSS
— CENTER >> ON
OFF
— REAR >> ON
OFF
— SUBWOOFER >> ON
OFF
— CNTR DELAY >> E
___ REAR DELAY >> E
Ш DOWNMIX
НИКЕ If the disc being played has Dolby
PRO LOGIC stereo sound, select this
speaker, the disc signal will be decoded by
the decoder system of the unit, produce
dynamic effect in your room.
Stereo: When output 5.1 channel, Audio
output L/R two channels. When output 2
channels, Audio output normal stereo
signal.
Ш CENTER
ON: When center speaker is connected,
there is signal output.
OFF: No center speaker connected, no
signal output.
Ш REAR
ON: When rear speakers are connected,
there is signal output.
OFF: No rear speaker connected, no
signal output.
ll SUBWOOFER
ON: when bass speaker is connected,
there is signal output.
OFF: No bass speaker connected, no
signal output.
Ш CNTR DELAY
0 msec: When Df=Dc
1 msec: When A = 34cm
2 msec: When A = 68cm
3 msec: When A = 102cm
* (A)= Df - Ос
Delay time (0,1 2---5)equals À divided 34
Ш REAR DELAY
0 msec: When Df=Ds
3 msec: When B = 102cm
6 msec: When B = 204cm
9 msec: When B = 306cm
* (B)= Df - Ds
Delay time (0,3,6,9,12,15)equals B divided 34
LT appropriate location
—i— of center speaker.
LES =. а
nn
surround speakers .
All speakers must be in circularity of R=Df
TE E EEES
AE E =p E MEN eo
o Ml a RARO TEN
The setting structure is :
- -DOLBY DIGITAL SETUP - -
STEREO
LEFT MONO
RIGHT MONO
MIXED MONO
— DYNAMIC RNG E
— DUAL MONO >>
— 5.1 CHANNEL >> ON
OFF
> MAIN PAGE
E DUAL MONO
This is the output mode of the L and R
signals of the set audio output. If it is set to
“MIXED MONO”, the function only works
when the DVD being played is 5.1-channel.
Ш DYNAMIC RNG
This is selected to adjust linear compression
rate to obtain the different compression
results of the signals.
EN 5.1 CHANNEL
ON: Switch 5( +1) speakers on.
OFF: Switch the rear/center/super bass
speakers off.
. 32.
a o
ure is :
The setting struct
TORES >> CHANGE
PW MODE >> ON
a |
- -PASSWORD SETUP PAGE - -
0 OFF >»
J PASSWORD MODE
e ON: The password works, "PREFER-
ENCES" is dim and can not be selected.
e OFF: The password is locked,
"PREFERENCES" can be selected.
E PASSWORD CHANGE
Select this to adapt the code, the screen
shows:
PASSWORD CHANGE PAGE-- |
OLD PASSWORD — 1
NEW PASSWORD
CONFIRM PASSWORD
Enter a password according to the screen.
Notes: The preset password is 99999.
The setting structure is :
— AUDIO >> ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
— SUBTITLE >> ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OFF
. 33 -
— DISC MENU >> ENGLISH
CHINESE
FRENCH
SPANISH
JAPANESE
— LOCALE >> CHINA
EUROPE
HONG KONG
JAPAN
TAIWAN
GBR
USA
>> 1. G
2.
3. PG
4. PG 13
5.
6. PG-R
7. NC-17
8. ADULT
NO-PARENTA
— DEFAULTS >> RESET
— PARENTAL
Ш SELECT LANGUAGE
If a language mentioned above is recorded
on the disc, you can select sounds, subtitles
or disc menu languages. If not, the language
recorded on the disc is shown.
Ш PARENTAL
When playing disc with parent lock function,
you may select an age control grade
according to grade of disc and your desire.
Example: Select"PG", you cannot play
DVD video disc rated higher than the PG
grade. |
Ш DEFAULT >> RESET
Each function setting returns to the initial
status in the factory if you select this.
Notes:
e "PREFERENCES" only can be selected in
password OFF and the unit goes into stop
mode.
№ SELECT TRACKS WITH
NUMBER BUTTONS
1. Insert a disc, the unit search disc
information. The TV screen displays.
( N
Root Root
MP3-01
MP3-02
MP3-03
MP3-04
MP3-05
N SQ N CO
PLAY MODE: FOLDER
_
2. Press number buttons to select song
folder.
Example: Select folder 5, the TV screen
displays.
Root ON
MP3-05 WAVE-51
MP3-06 WAVE-52
MP3-07 WAVE-53
MP3-08 WAVE-54
MP3-09 WAVE-55
PLAY MODE: FOLDER
a ~~ WN — ©
=
3. Press number button |2 |, the unit will play
the second track included in the fifth folder.
MN SELECT TRACKS WITH MENU
1. Insert a disc, the unit search disc
information. The TV screen displays main
menu. Press direction key v to select
song folder. Press » (PLAY) to confirm
selection. Example: Select MP3-02, the
TV screen displays.
o DN
- Root ON 0
MP3-02 | WAVE-11 1
MP3-03 | WAVE-12 2
MP3-04 | WAVE-13 3
MP3-05 | WAVE-14 4
MP3-06 | WAVE-15 5
PLAY MODE: FOLDER
N
2. Press direction buttons ( y , ato
select song. Press » (PLAY) button to
start playback. |
3. Press » , т to select other tracks in
stop mode.
4. In stop mode, select the folder icon on the
first line, then press » (PLAY) button to
return to the root menu.
5. Press » »l or|<« to play previous or next
songs.
Hl OTHER FUNCTIONS
During playback MP3 discs, the unit features
mute, volume control, repeat play and etc.
Operations are the same as CD.
. 34 -
TROUBLE SHOOTING
If you experience the following problems
while using the unit, this troubleshooting
guide can help you.
No sound
e Check if the unit is connected securely.
* Make sure you operate the TV or amplifier
correctly.
* Make sure you have selected DVD
player position on the amplifier.
No image
e Check if the unit is connected securely.
e Make sure you operate the TV correctly.
* Make sure you set the color system
correctly.
Bad sound quality
* Make sure the audio output mode is set
correctly.
* Make sure the audio connection between
the unit and amplifier is right.
Image rolls and no color
* The color system set by this unit does
notmatch with that of TV. Press | SYSTEM
on the remote control to select needed
one.
.35.
Disc can not be played
* There is no disc in the unit.
* Put the disc on the disc tray properly with
the label side up.
* Clean the disc.
* Moisture has condensed in the unit.
Remove the disc and leave the unit on for
about one hour.
* DVD may be wrong region.
The unit doesn't operate normally
e Disconnect the power plug and insert it
into the wall outlet again.
Remote control does not work
* Remove barriers between the remote
control and the unit.
* Point the remote control at the remote
control sensor of the unit.
* Replace the batteries with new ones.
fee dE en [ИО енко 6 ко кей ке
TECHNICAL SPECIFICATIONS
Laser
Wavelength 650nm
Video system
NTSC / PAL / MULTI
Frequency response
20H ~ 20KHz + 2.5dB
Signal/noise ratio
> 85dB
Audio distortion + noise
<- 80dB (1KHz)
Channel separation
> 85dB ( 1KHz)
Dynamic range
> 85dB ( 1KHZ)
Audio out
(analog audio)
output level: 2V + 10%
Load impedance: 10K Q
Audio out
(digital audio)
Output
output level: 0.5Vp-p + 20%
Load impedance: 75 ©
Video out
output level: 1Vp-p + 20%
Load impedance: 75 Q, imbalance,
negative polarity
S-video out
output level: brightness (Y) 1Vp - p + 20%
chromaticity (C) 0.286Vp-p + 20% Load iimpedance: 750
Power supply
- AC110 - 240V , 50/60Hz
Power Consumption
< 20W
Dimensions
435 x 280 x 80mm
Weight
Around 3.2Kgs
This manual is only for your reference, any change to the design and specifications will not be
advised.
. 36 -
BEDIENUNGSANLEITUNG
© Sherwood
VD-5108
DVD-Spieler