Management Platform - COMM-TEC

Management Platform
QUICK-START GUIDE
Congratulations on your purchase of the ZyPer Management Platform. Your complete satisfaction is very important
to us.
The ZyPer Management Platform provides a simplified, high-level HTTP/AJAX/JSON and Telnet interface to ZyPer
encoders and decoders. The ZyPer Management Platform maintains contact with all ZyPer encoders and decoders,
ensuring that they are properly configured and provides a clear status on each unit.
The ZyPer Management Platform runs on a full LAMP stack. Requests are received through PHP and delivered using
JSON encoded data. In addition, the Telnet protocol can be used to directly access and manage all features.
All configuration data is stored in a MySQL database.
Operating Notes
The ZyPer Management Platform includes the Maestro Z web interface. The following browsers are supported:
• Mozilla Firefox version 38 or greater
• Microsoft Internet Explorer 10 / 11
• Google Chrome version 40 or greater
All ZyPer encoders and decoders must be running firmware 2.8.6, or greater. Refer to the Support page on the
ZeeVee web site to download the latest firmware.
Features
• Centralized detection, configuration, and management of all ZyPer encoders and decoders on the network
• Built-in Maestro Z web server provides access from any web-enabled device with a browser, including phones
and tablets
• High-level HTTP/AJAX/JSON and Telnet interface
• Password-protected administrative access
• Compact design
In the Box
•
•
•
•
1 x ZyPer Management Platform
1 x 3 ft (91.4 cm) 5 V DC power adapter
1 x 3 ft (91.4 cm) AC power cord
1 x Quick-Start Guide
1
Management Platform
ZyPerMPQ U I C K - S T A R T G U I D E
ZyPer Management Platform
Panel Layout
ZyPerMP
ZyPer Management Platform
2
3
4
5
ZyPerMP
Intelligent
IP Distribution
ZyPer Management Platform
6
6
Power On/Off
7
1
Intelligent IP Distribution
Power On/Off
ID
Name
Description
1
Power On/Off
Press this button to manually power-off the ZyPer Management Platform.
When the ZyPer Management Platform is connected to a power source, it will
Intelligent
IP Distribution
automatically power-on. If power is lost
or disconnected,
the ZyPer Management
Power On/Off
Platform will automatically power-on when power is restored.
2
Power receptacle
Connect the included power supply to this power receptacle.
3
HDMI
Connect an HDMI cable from this port on the ZyPer Management Platform to an
HD display.
4
Mini DisplayPort
Connect a Mini DisplayPort cable from this port to a DisplayPort interface
(optional).
5
Ethernet port
Connect an Ethernet cable from this port to a switch that is on the same Local
Area Network (LAN) that will be hosting the ZyPer devices.
6
USB port
Connect up to four USB 3.0 devices, such as a keyboard and mouse, to these
USB ports.
7
Headphone / Mic jack Not used.
2
Management Platform
QUICK-START GUIDE
Installation
BEFORE YOU BEGIN: Always make sure that all encoders and decoders are running the latest version of firmware.
Refer to the Support page on the ZeeVee web site to download the latest firmware.
1. Connect the included power supply to the power receptacle on the ZyPer Management Platform.
2. Connect the included AC power cord from the power supply to an available electrical outlet.
3. Connect an Ethernet cable from the ZyPer Management Platform to a switch that is on the same LAN that will
be hosting the ZyPer devices. Although the ZyPer Management Platform can be connected anywhere on the LAN,
it is recommended that it is connected to the primary switch where the ZyPer endpoints are connected.
NOTE: If the ZyPer Management Platform does not detect a DHCP server within 60 seconds, a link-local
address of 169.254.xxx.xxx will be assigned to the ZyPer Management Platform. If you wish to use static or
fixed-mapping using DHCP, then refer to the User Manual.
Using Windows®
Using OS X®
a. Connect an Ethernet cable from your computer to
the same switch as above.
a. Connect an Ethernet cable from your computer to
the same switch as above.
b. Go to the Network folder.
b. Open the Terminal application.
c. Locate the icon titled “ZyPer Management
Server” followed by an IP address. This is the
IP address of the ZyPer Management Platform.
c. At the prompt, enter ping zyper.local.
d. The IP address of the ZyPer Management
Platform will be displayed.
4. Open a web browser and enter the IP address of the ZyPer Management Platform.
5. The login screen for the Maestro Z will be displayed.
6. Enter admin for both the Username and Password fields.
7. Click the Login button.
8. Refer to the User Manual for details on managing devices using Maestro Z, Telnet, and AJAX/JSON.
3
Management Platform
QUICK-START GUIDE
Specifications
CPU
• Intel® Celeron® Processor 3205U
Operating System
• Linux Ubuntu 14.04
Internal Storage
• 64 GB SSD
Graphics
• Intel® HD Graphics
LAN
• Gigabit LAN (Realtek RTL8111G)
Internal Memory
• 8 GB
Power Supply
• Input: 100 ~ 240 V AC
• Output: 19 V DC, 3.42 A
Rear I/O
•
•
•
•
•
•
Operating Temperature
• 0 ºC to +35 ºC
Storage Temperature
• -20 ºC to +60 ºC
VESA
• VESA Bracket included
Supports 75 x 75 and 100 x 100 mm
Dimensions (W x H x D)
• 4.25 in x 1.33 in x 4.5 in
(107.9 mm x 33.8 mm x 114.3 mm)
1 x Type A, 19-pin female
1 x Mini DisplayPort, 20-pin, female
4 x USB 3.0, Type- A, female
1 x RJ45
1 x 5V DC
1 x Kensington lock slot
RoHS
North America: +1 (347) 851-7364 • sales@zeevee.com
International: +1 (347) 851-7364 • sales@zeevee.com
EMEA: +44 1494 956677 • EMEAsales@zeevee.com
4

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project