FS-SPL Digital SPL Meter

DATA SHEET
FS-SPL
Digital SPL Meter
Features:




Dual range Low and High
Built-in weighting curves
A & C weighting
Response can be switched
between slow or fast
 Maximum hold switch displays the
highest reading attained
Description:
The FS-SPL meter has been designed to meet the measurement requirements of safety Engineers, Health,
Industrial safety offices and sound quality control in various environments. The FS-SPL is a compact unit great for
checking ambient sound pressure levels for tendering purposes or commissioning.
Ranges from 30dB to 130dB at frequencies between 31.5Hz and 8kHz.
Display with 0.1dB steps on a 4-digits LCD
Supplied in a protective carry case, tripod mounting adaptor and mic wind screen.
Requires 1 x 9V long life battery (included).
Specifications:
Ranges:
Low: 35 – 100dB High: 65 – 130dB
Resolution:
±0.1dB
Frequency Range:
31.5Hz - 8000Hz
Dynamic Range:
55 dB
Frequency Weighting:
A&C
Microphone:
Electret condenser
Battery:
9V
Dimensions:
130H x 52W x 32D mm
G:\Documents\Datasheets\Word Datasheets\FS-SPL.Doc
RevDate: 3 September 2015
NSW (Head Office)
18-20 Brookhollow Ave
Baulkham Hills NSW 2153
Tel 02 8850 2888
Fax 02 8850 2999
www.firesense.com.au
VIC (Branch Office)
4/297 Ingles St
Port Melbourne VIC 3207
Tel 03 9646 4557
Fax 03 9646 4558
QLD (Branch Office)
2/225 Queensport Rd Nth
Murarrie QLD 4172
Tel 07 3890 8842
Fax 07 3890 8894

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project