Okina USA WDEDX-768AI Quick Setup Manual

WDEDX-768AI

680 TVL

WDEDX-761AI

610 TVL

Hyper Wide Dynamic Dome Camera

Effio WDR

Quick Setup Guide

** Please refer to User Manual CD for detailed information **

DIMENSIONS (Unit: mm)

DESCRIPTION OF CAMERA PARTS

FEATURES

WDEDX-768AI

„

Color: 680 TVL, B/W: 700 TVL

„

Powerful 510x WDR (54dB)

WDEDX-761AI

„

Color: 610 TVL, B/W: 630 TVL

„

Powerful 256x WDR (53dB)

„

1/3" Hyper Wide Dynamic Color Camera, Effio WDR DSP

„

2.8mm~10.5mm Aspherical Auto Iris Lens

„

Color: 0.1 Lux @ F1.2, B/W: 0.08 Lux @ F1.2,

Sense-up: 0.0001 Lux @ F1.2

„

Multi-Language OSD Control

„

Ideal for Backlight Environments

„

2D/3D Noise Reduction & Sense Up (512x) Functions

„

Shutter Mode (SCHEDULE / DAY&NIGHT)

„

Face Detection of up to 4 faces; E-zoom Function (1~256x)

„

Advanced Motion Detection Function

„

Polygonal Mosaic Privacy Mask / Freeze / Timer Clock

„

Built-in Varifocal Lens & Unique 3-Axis Gimble Mechanism

„

12V DC / 24V AC, 3.0W

PACKAGE CONTENTS

„ One (1) WDEDX-768AI or WDEDX-761AI camera with video/power cable

„ Three (3) Mounting Screws

„ Three Wall

„ One (1) DC Connector

„ One (1) Cleaning Cloth

„ One (1) Mounting Guide Sticker

„ One (1) Warning Sign Sticker

„ One (1) Quick Setup Guide

„ One (1) CD with User Manual

* For any returns, please include all components listed above with original packaging in Resalable Condition. Absolutely No Returns will be accepted if any components are missing/damaged or if any cable is cut or tampered with.

(1) FAR/NEAR

To adjust the lens focus for near and far.

(2) WIDE/TELE

To adjust the lens angle for wide and tele.

(3) OSD Control Buttons

ENTER button

UP & DOWN button

LEFT & RIGHT button

This is an output for BNC connection to a video monitor, etc (75Ω).

(6) Secondary Power Input Terminal

Connect the power input of 12V DC.

(7) Secondary VIDEO Connector

This is an RCA output.

Connect the power input of 12V DC or 12V DC / 24V AC.

Copyright 2010. All Rights Reserved. www.okinausa.com 1 REV012011-V06

SPECIFICATION

PIC D-225 D-226

Model

Image Sensor

Number of Total Pixels

Resolution

Minimum Illumination

Wide Dynamic Range

Video Output

Signal to Noise Ratio

Gamma Correction

Menu

Title

Synchronizing System

Digital Day&Night Mode

Electronic Shutter

Automatic Gain Control

White Balance

Back Light Compensation

Flickerless

Dynamic Noise Reduction

Sense Up

Face Detection

Language

E-Zoom

Motion Detection ; Privacy

Timer Clock

Lens Mount

Lens, Angle of View(H)

Power Input ; Consumption

Operation ; Storage Temp.

Operation ; Storage Humidity

WDEDX-768AI WDEDX-761AI

1/3" Sony Double-speed (Double-density) CCD

NTSC: 1028(H)x508(V)

PAL: 1024(H)x596(V)

Color: 680TVL, B/W: 700TVL

Sony Effio WDR

NTSC: 811(H) X 508(V)

PAL: 795(H) X 596(V)

Color: 610TVL, B/W: 630TVL

Sony Effio WDR

Color: 0.1 Lux @ F1.2, B/W: 0.08 Lux @ F1.2, Sense-up: 0.0001 Lux @ F1.2

510x Normal Camera (54dB) 256x Normal Camera (53dB)

1.0Vp-p Composite, 75Ω (BNC) / Internal RCA for Service Monitor

More than 52dB (AGC off, Weight on)

0.45

OSD Control

TITLE (LOCATION)

INTERNAL

COLOR / B&W / AUTO / SCHEDULE

AUTO (1/50(60)~1/100,000sec.) / SCHEDULE or DAY&NIGHT / MANUAL: 1/50(60), FL 1/120(100),

1/200, 1/250, 1/350, 1/500, 1/750, 1/1,000, 1/1,500, 1/2,000, 1/3,000, 1/4,000, 1/10,000, 1/30,000,

1/60,000, 1/100,000 sec.

AUTO / MANUAL / OFF

ATW / AWB / AWC (Push Lock) / MANUAL /

OUTDOOR (1800°K~10500°K) / INDOOR (4500°K~8500°K)

WDR / BLC / OFF

ON / OFF

3D / 2D

AUTO (Limit x2~x512) / OFF

4 Face Detection

ENGLISH / TRADITIONAL CHINESE / SIMPLIFIED CHINESE x1~x256, Pan / Tilt Adjustable

ON / OFF (24x16 Zones, Alarm) ;

ON / OFF (16 Zones Programmable, Polygonal Mosaic)

Year / Month / Date, Hour / Minute / Second

Built-in DC Auto IRIS Lens

2.8mm~10.5mm / F1.2

Aspherical Auto Iris Lens / 99.5°~27.4°

12V DC / 24V AC (10.8~39V DC / 24V AC) ; 3.0W

Internal 12V DC Only

14˚F~122˚F ; -4˚F~140˚F / -10˚C~50˚C ; -20˚C~60˚C

Maximum: RH80% ; RH90%

5.51”(DIA) x 4.37”(H) / 140(DIA)x111(H)mm Dimensions

Net Weight

OSD OPERATION

Use OSD Control Buttons to operate OSD and adjust settings.

** MAIN MENU **

LENS

AGC

WDR

WHITE BALANCE

2DNR & 3DNR

DAY / NIGHT

SHUTTER

IMAGE

SET<┘

AUTO

WDR<┘

ATW

SET<┘

COLOR

MANUAL<┘

SET<┘

SET<┘

SET<┘ EFFECT

SYSTEM

EXIT

1.10 lbs / 500g

* Specifications are subject to change without notice.

PAL version also available.

1. Start to operate the OSD menu

Press the ENTER button to bring up the OSD main menu to start operating OSD menus.

2. Select items with the cursor buttons y Use c and d to move the cursor up and down. y Use e and f to switch the modes or to adjust the parameters or the values of the settings.

3. Switch to the sub-menu

Items with “<┘” symbol in the end contains sub-menus. For further settings of those items, select the desired item with the button c or d and press the ENTER button to bring up the sub-menu and edit.

4. Return to the previous page

Select RETURN and press the ENTER button to return to the previous page.

5. Exit the OSD menu

Select EXIT with the button c or d and press the ENTER button to exit the OSD menu.

Copyright 2010. All Rights Reserved. www.okinausa.com 2 REV012011-V06

BASIC SETTINGS

Adjust the item with buttons e and f, for the item with sub-menus, click enter to edit it.

** MAIN MENU **

LENS

AGC

WDR

WHITE BALANCE

2DNR & 3DNR

DAY / NIGHT

SHUTTER

IMAGE

EFFECT

SYSTEM

EXIT

SET<┘

AUTO

WDR<┘

ATW

SET<┘

COLOR

MANUAL<┘

SET<┘

SET<┘

SET<┘ y y y y y y y y y y

LENS: LENS <┘/ BRIGHTNESS / SPEED

AGC: AUTO / OFF / MANUAL

WDR: WDR / BLC / OFF

WHITE BALANCE: ATW / AWB / INDOOR / OUTDOOR / MWB / AWC

2DNR & 3DNR: ON / OFF

DAY/NIGHT: COLOR / B&W / AUTO / EXTERNAL / SCHEDULE

SHUTTER: MANUAL / AUTO / DAY/NIGHT

IMAGE: HIGH RESOLUTION / SHAPRNESS / CHROMA / FREEZE / MIRROR /

POS/NEG

EFFECT: MOTION DETECTION / FACE DETECTION / VPS / E-ZOOM / PRIVACY

MASK

SYSTEM: CAMERA TITLE / DATE/TIME / COMM / SYNC / LANGUAGE / FIRMWARE /

RESTORE y EXIT: Exit the OSD menu

CAUTION

1. Never point the camera toward the sun

Do not expose the lens directly to the sun or to strong light as this may damage the pick-up device.

2.

Handle this camera with care

Avoid any shock or bumping of the camera. Improper handling could damage the camera.

3.

Requires a proper operating environment

This camera is designed for indoor and outdoor use. The allowable temperature range for operation of this camera is between 14˚F~122˚F /

-10 °C~50°C and the allowable humidity is 90%RH maximum.

4.

Clean the front face to the pick-up device

It is recommended that the pick-up device surface be cleaned before lens installation or whenever the lens is changed. Cleaning should be done by using a chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator and ethanol to carefully remove any fingerprint or dust.

5.

Check the power source voltage

The power source voltage should be within the specified range. (Camera must meet the specifications). Camera must be connected to a surge protector at all times.

6.

Objects and liquid entry

Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts that could result in a fire or electric shock. Never spill any kind of liquid on the video product.

7. Servicing

Do not attempt to service this video product by yourself as opening or removing covers may expose you to dangerous voltage or other hazards.

Refer all service to qualified servicing personnel.

8.

Damage requiring service

Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the following conditions: a. When the power supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d. If the video product has been dropped or the cabinet has been damaged. e. When the video product exhibits a distinct change in performance.

WARRANTY

OKINA USA products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs:

1. Camera sticker is removed

If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was purchased. We have no other way to verify the purchase record without the serial number on the camera sticker; therefore, it should not be removed.

2. Camera is modified in any way

If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be voided immediately. It is the customer’s responsibility to keep the camera in good condition.

3. Video or power cable is cut

The video cable and the power cable should not be tampered with. Cutting or modifying of the cables will result in termination of the warranty.

Copyright 2010. All Rights Reserved. www.okinausa.com 3 REV012011-V06