VIPA general catalogue

VIPA general catalogue
C ATALOG
SUCCESSFUL AUTOMATION
2 017 / 18
VIPA Elektronik-Systeme GmbH A-1130 Vienna, Austria
Hietzinger Kai 85
Phone: +43/1/895 93 63 – 0
Fax: +43/1/895 93 63 – 50
eMail: elektroniksysteme@vipa.at
TABLE OF CONTENTS
VIPA - AUTOMATION
VIPA SPEED7 Overview CPU-Modules
4 - 5
VIPA SPEED7 StUDIO
6
VIPA SLIO iMC7
7
VIPA SPEED7 CPU-Modules
VIPA SLIO terminals
8 - 9
10 - 14
SIGnAMAtIC EP800 IEC60870 remote control system
15
VIPA MICRO PLC
16
VIPA 300S CPUs with Instruction Set S7-300/S7-400 by SIEMEnS
17 - 19
VIPA 300V I/O-Units, CPs & Fieldbus
20
VIPA 300V Accessories
21
VIPA 200V Modular PLC-System
VIPA 100V Micro PLC-Compact System
VIPA General Accessories
22 - 24
25
26 - 27
VIPA teleservice
28
VIPA Safety with Samos Pro
29
VIPA tD/OP-textpanels
30
VIPA touch Panel Computers: Professional-Series
31
VIPA touch Panel Computers: ECO-Series
32
VIPA touch Panel Computers: Multi touch Series
33
VIPA touch Panel Computers: General
34
HILSCHER & VSCOM- COMMUNICATION
PAGE
HILSCHER Protocol Converters
35 - 36
HILSCHER Fieldbus Cards
36 - 37
VSCOM Protocol Converters & PC-Cards
2
PAGE
38
PLC
SPEED7-TECHNOLOGY – compatible SIEMENS S7-300
®
CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS
SPEED7 INCREASES THE PRODUCTIVITY OF YOUR PLANTS AND MACHINERY
• Performance: • Interfaces:
Very fast processing and cycle times increase the output of machinery and
manufacturing plants
Onboard Ethernet, MPI, EtherCAt, PROFInEt, PROFIBUS-DP Master/Slave, PtP serial RS485 interface and integrated CP 343/543 Ethernet
• Programming language: Programmable with StEP®7 by Siemens, tIA portal and SPEED7 Studio
• Standard SD Card:
the SD card is used for backup, storage of program and data and also for running the CPU (the SD-Card is not necessary to run the CPU)
• Memory Management: Via VSC card it is possible to increase the work memory of the CPU up to 8MByte without changing the hardware
• Stock cost:
Only a few of CPU types
SPEED7 is available world-wide. More than 60 VIPA branch offices offer service and support
TECHNICAL DATA
SLIO 013C
SLIO 014
SLIO 015
SLIO 017
SLIO IMC7
Work memory (50% program /50% data)
64-128kB
128-256kB
256-512kB
512kB - 2MB
256-512kB
20/20
20/120
10/60
10/60
10/60
8 8192 / 512 / 512
16kB / 2048 / 2048
8192 / 512 / 512
1024Byte
4096Byte
1024Byte
I/O Adress area
1024 / 1024Byte
4096 /4096Byte
1024 / 1024Byte
Process image I/O
1024 / 1024Byte
4096 /4096Byte
1024 / 1024Byte
Processingtime (Bit/Word/Fix-/
Floatingpoint in nanoseconds)
Number range: FB, FC,
DB
8191
8191
Bit memory / Counter / Timer
Local data loc. (per Prio class configurable)
MPI max. Speed
(under Developement)
optional
optional
optional
optional
Fieldbus: PROFIBUS-DP-Slave integrated
optional
optional
optional
optional
optional
--
--
Fieldbus: PROFINET-Master integrated
Feldbus: ETHERCAT-Master integrated
--
--
Ethernet PG/OP-Port integrated/Connections
4
4
4/4
4
4
4/4
Ethernet CP 343 integrated/Connections
ISOonTCP/ISO(H1)/S7/TCP/UDP Connections
-- /---
-- /---
---
---
PtP
PtP on PROFIBUS jack/MPI jack toggleable
MOTION-axis integrated
VIPA SPEED-BUS
4
4
--
4/8
4
4
4/4
4 / 24
4
4
4
4/4
8
24 (16)
-- /---
---
---
optional (4/8/16/20)
--
--
4
4
4/4
--
AE / AA / Pt100
2 / -- / --
-- / -- / --
-- / -- / --
-- / -- / --
-- / -- / --
DE / DA / DEA’s
16 / 12 / -4 (100kHz) / 2 (20kHz)
-- / -- / --- / --
-- / -- / --- / --
-- / -- / --- / --
-- / -- / --- / --
116,5 x 109 x 76,5
131,5 x 109 x 76,5
131,5 x 109 x 76,5
131,5 x 109 x 76,5
131,5 x 109 x 76,5
Counter / PWM or Stepper (switchable)
Dimensions in mm: (W x H x D)
4
12 MBd
Fieldbus: PROFIBUS-DP-Master integrated
PLC
SPEED7-TECHNOLOGY – compatible SIEMENS S7-300
®
CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS
SPEED-Bus
Interfaces
Memory management
• the patented and unique VIPA SPEED bus is available in select CPUs for very fast appli cations.
• In addition to the MPI and PtP interfaces, an Ethernet-PG/OP interface is, of course, always available.
• Expand your work memory by inserting a VIPA MCC without changing the CPU.
• A clear competitive advantage for you and your
application.
• this interface will remain our standard.
Performance
User friendly
Compatible
• Because of the enormously powerful SPEED7 chip
you will find hardly any limitations in automation
techno logy.
• All 300S are programmable via SPEED7 Studio • the mixture of VIPA modules with modules of
other manufacturers is of course possible.
• Powerful, flexible and very communicative.
• With VIPA, you decide which engineering tool
you want to apply!
TECHNICAL DATA
Work memory (50% program /50% data)
Processingtime (Bit/Word/Fix-/
Floatingpoint in nanoseconds)
312SC
• this will remain our standard.
from VIPA or via tools of other manufacturers as well
as StEP ®7 and tIA Portal by SIEMEnS.
313SC
128kB - 1MB
Just think about it!
313SC/DPM 314SC/DPM 314ST/DPM 315SB/DPM 315SN/NET
256kB - 1MB
21/125
• this also minimizes your warehousing costs. 512kB -2MB 512kB - 2MB
21/125
Bit memory / Counter / Timer
Local data loc. (per Prio class configurable)
10/58
2047
4095
8191
8191
8192 / 512 / 512
16K / 2K / 2K
8192Byte (configurable)
1024 / 1024Byte
Process image I/O
MPI max. Speed
317PN
4MB - 8MB
13/75
512Byte
I/O Adress area
317SE/DPM 317SN/NET
1MB - 4MB
11/63
Number range: FB, FC,
DB
315PN
2048 / 2048Byte
8192 / 8192Byte
128 / 128Byte
8192 / 8192Byte
187,5kBit
12 MBd
Fieldbus: PROFIBUS-DP-Master integrated
--
--
4
4
4
4
4
Fieldbus: PROFINET-Master integrated
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Feldbus: ETHERCAT-Master integriert
--
--
4
--
--
--
--
4
4
4
4
4
Ethernet PG/OP-Port integrated/Connections
-4/4
-4/4
4
4
4/4
4
-4/4
-4/4
-4/4
-4/4
-4/4
-- / ---
-- / ---
-- / ---
-- / ---
-- / ---
-- / ---
4/ 32
-4/4
Ethernet CP 343 integrated/Connections
ISOonTCP/ISO(H1)/S7/TCP/UDP Connections
4/ 32
-4/4
8
8
-- / ---
PtP on PROFIBUS jack toggleable
PtP on PROFIBUS jack/MPI jack toggleable
4
4
4
4
PtP
4
4
4
--
4/ 32
4/4
4/ 32
64
24
--
--
--
--
--
--
--
--
--
--
4
--
VIPA SPEED-BUS
--
--
--
4
4
4
AI / AO/ Pt100
-- / -- / --
4/2/1
4/2/1
4/2/1
4/2/1
-- / -- / --
-- / -- / --
-- / -- / --
-- / -- / --
-- / -- / --
-- / -- / --
DI / DO/ DIO’s
16 / 8 / -2 (10kHz)
24 /16 /-3 (30kHz)
16 /16 /-- 24 / 16 / 8 8 / -- / 8
3 (30kHz) 4 (60kHz) 4 (100kHz)
-- / -- / --
-- / -- / ---
-- / -- / ---
-- / -- / ---
-- / -- / ---
-- / -- / ---
Dimensions in mm: (W x H x D)
--
80x125x130 120x125x130 80x125x130 120x125x130 80x125x130 40x125x130
--
4
MOTION-axis integrated
Counter / PWM or Stepper (switchable)
--
4
4
--
--
80x125x130
5
PLC
SPEED7 STUDIO
Intelligent + intuitive + open = instant entry
SPEED 7 Studio – the new VIPA engineering software, with
which any SPEED7 controller can be programmed more
economically and efficiently.
The new intelligence of the hardware configuration, the intuitive
user interface and the system openness make SPEED7 Studio the
powerful and easy-to-use tool. Optimize automation tasks, reduce
development costs to a minimum, and save time- and cost intensive
software training. The user can again focus on his actual engineering tasks.
SPEED7 Studio is systematically based on user friendliness. Everything has been freshly designed, from the hardware configuration,
pogramming and networking to the parametrization of frequency
inverters and drives, and even visualization. All functions, properties
and libraries are automatically prepared and displayed in the SPEED7
Studio editor view.
Unique SPEED7 tools make the software attractive and efficient. High
speed applications are even more economic with the SPEED bus
functions. EtherCAT is fully integrated. The EtherCAT configurator
quickly and safely configures applications, automatically reads them
and labels them with standard symbols. Integrated SLIO functionalities such as automatic calculation of power consumption and
integrated process image calculation, make SPEED7 Studio a highly
efficient tool that holistically integrates the SPEED7 product spectrum.
Highlights
• Photorealistic Hardware-/Network-Configuration
• Intuitive User Interface
• Free Window Docking
• Tool-Tips
• Known S7-Programming Environment
• VIPA-specific Blocks
• Full integrated Visualization
• WEB-Visualization
additionally SPEED 7 STUDIO BASIC
• SCADA-System MOVICON
additionally SPEED 7 STUDIO PRO
• Motion-Control using PLCopen Standard
• Intuitive Axes Configuration
• CAM Editor
Order No.:
PRICE
Description
in Euro
SW010L1MA
1x Software licence SPEED7 Studio LItE for projects up to 128kB, (up to 3 PCs)
SW010B1MA
1x Software licence SPEED7 Studio BASIC
full version, unlimited memory, (up to 3 PCs)
SW010P1MA
6
SPEED7 SOFTWARE
1x Software licence SPEED7 Studio PRO
full version, unlimited memory, Motion-Control
(up to 3 PCs)
0,333,777,-
PLC
SLIO– The smart I/O system
CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS
The experiences of VIPA with PLC control technology have been
combined with those of YASKAWA in the field of motion contol. The
result is the SLIO CPU iMC7, a PLC with integrated motion control
functions.
EtherCAT is available for simple communication with the YASKAWA
inverters and servo drives. The combination of the SPEED7 Studio
engineering platform, the new Sigma-7 series and the iMC7 makes
it possible to realize motion control tasks easily in a VIPA SPEED7
controller.
SPEED7 Studio provides a catalog of YASKAWA drives. This makes
it possible to add these components to the fieldbus using a dragand-drop function. Project planning also becomes much easier.
With the motion control setup it is possible to define axes in the
motion contol instructions. These axes are assigned to the servo
drives and encoders, and the axis parameters are set. The CAM
profile editor allows complex movements to be divided into simple,
sequential parts. These parts can be smoothly merged by entering
the transitional conditions.
Order No.:
015-CEFNR00
Speed7Studi o
SPEED7 SLIO-CPUs
PRICE
Technical data
in Euro
CPU 015-SPEED7 technology, DC 24V, incl. 256kByte (up to 512kByte),
nVS-RAM, MPI-interface,SD-Slot, clock, Ethernet interface for PG/OP
communication, RS485 interface with library for ASCII, StX/EtX, USS,
3964R, ModbusRtU Master/Slave or MPI (switchable), RFC1006, tCP/IP
and S7 communication for 8 connections, optional EtherCAt for 4/8/20 Motionaxes and PROFIBUS-DP-Master/Slave, 64 SLIO-units per line.
(W x H x D) 131.5 x 109 x 83mm
HW identification: in Speed7Studio included
645,-
SPEED7 SLIO-CPUs
PRICE
Order No.:
MEMORY & FUNCTION EXTENSIONS
in Euro
955-0000000
VIPA SD-Card standard (VSD), empty
VIPA 015-CEFNR00
YASKAWA and VIPA have laid the foundation
for a new kind of automation technology.
Motion control PLC:
SLIO CPU iMC7
• A CPU for standard and motion control applications
• Fully integrated EtherCAT master
• Proven SPEED7 technology for maximum takt rates
• Isochronous operation and multi-axis applications via EtherCAT
• Programmable with SPEED7 Studio by VIPA
• Very flexible, modular system
• Single-source solution for control and drive components
• Compact design (W) 131,5 × (H) 109 x (D) 83 mm
50,-
FSC-EXTENSION CODE
FSC-C0ME040
EtherCAt MAStER + 256kByte + MC 4 axes
FSC-C0NE040
EtherCAt MAStER + 256kByte + MC 8 axes
FSC-C0PE040
EtherCAt MAStER + 256kByte + MC 20 axes
349,649,on request
7
PLC
SLIO– The smart I/O system
CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS
SPEED7 BY VIPA – VERY FAST STEP®7 / TIA PROGRAMMABLE CPUs
Reference:
SIEMEnS
318
SIEMEnS
S7 1214
SIEMEnS
S7 318-2
SIEMEnS
S7 151-8
VIPA
SLIO 014
SIEMEnS
SIEMEnS
S7 317-2FPn/DP S7 317-2Pn/DP
VIPA
SLIO 015
Order No.:
013-CCF0R00
TIA
VIPA
SLIO 013
VIPA
SLIO 017
SIEMEnS
319-3Pn/DP
SPEED7 SLIO-CPUs
PRICE
Technical data
in Euro
CPU 014-SPEED7 technology, DC 24V, incl. 64kByte (up to 128kByte), nVS-RAM, MPI-interface, SD-Slot, clock, 16 DI, 12 DO, 24 VDC/0,5A, 2 AI, 4x counter (100kHz), 2x PWM (20 kHz),
Ethernet interface for PG/OP communication, RS485 interface with library
for ASCII, StX/EtX, USS, 3964R, ModbusRtU Master/Slave or MPI (switchable), optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line. (W x H x D) 116.5 x 109 x 83mm
HW identification: 6ES7314C-2 Pn/DP + 6GK343-1EX30-0XE00
495,-
VIPA 013-CCF0R00
STEP ®7
VIPA
315(7)Sn/Pn
1
CPU
2
013C
Memory extension
3
Fieldbus
8
014
015
017
iMC7
RAM RAM RAM RAM RAM RAM
64
128 256 512 1024 1536
PLC
SLIO– The smart I/O system
CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS
Order No.:
SPEED7 SLIO-CPUs
PRICE
Technical data
in Euro
CPU 014-SPEED7 technology, DC 24V, incl. 128kByte bis 256kByte, NVS-RAM, MPI-interface,
SD-Slot, clock, Ethernet interface for PG/OP communication, RS485 interface with library
014-CEF0R01 for ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable),
optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line.
(W x H x D) 131.5 x 109 x 83mm
STEP 7
TIA
HW identification: 6ES7315-2EH14-0AB0 + 6GK343-1EX30-0XE00
395,-
®
595,-
®
CPU 015-SPEED7 technology, DC 24V, incl. 512kByte (up to 2MByte), NVS-RAM, MPI-interface,
SD-Slot, clock, Ethernet interface for PG/OP communication, RS485 interface with library
017-CEFPR00 for ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable),
RFC1006, TCP/IP and S7 communication for 8 connections,
PROFINET- & optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line.
(W x H x D) 131.5 x 109 x 83mm
STEP 7
TIA
HW identification: 6ES7317-2EK14-0AB0 + 6GK343-1EX30-0XE00
995,-
VIPA 014-CEF0R01
CPU 015-SPEED7 technology, DC 24V, incl. 256kByte (up to 512kByte), NVS-RAM, MPI-interface,
SD-Slot, clock, Ethernet interface for PG/OP communication, RS485 interface with library
015-CEFPR01 for ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable),
RFC1006, TCP/IP and S7 communication for 8 connections,
PROFINET- & optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line.
(W x H x D) 131.5 x 109 x 83mm
STEP 7
TIA
HW identification: 6ES7315-2EH14-0AB0 + 6GK343-1EX30-0XE00
®
Order No.:
955-0000000
SPEED7 SLIO-CPUs
PRICE
MEMORY & FUNCTION EXTENSIONS
in Euro
VIPA SD-Card standard (VSD), empty
50,-
FSC-EXTENSION CODE
PROFIBUS MASTER
PROFIBUS SLAVE
200,75,-
955-C000020
64kByte
90,-
955-C000M20
PROFIBUS MASTER + 64kByte
290,-
955-C000S20
PROFIBUS SLAVE + 64kByte
165,-
955-C000030
128kByte
135,-
955-C000M30
PROFIBUS MASTER + 128kByte
335,-
955-C000S30
PROFIBUS SLAVE + 128kByte
210,-
955-C000040
256kByte
180,-
955-C000M40
PROFIBUS MASTER + 256kByte
380,-
955-C000S40
PROFIBUS SLAVE + 256kByte
255,-
955-C0ME040
EtherCAT MASTER + 256kByte + MC 4 axes
349,-
955-C0NE040
EtherCAT MASTER + 256kByte + MC 8 axes
955-C0PE040
EtherCAT MASTER + 256kByte + MC 20 axes
955-C000050
512kByte
390,-
955-C000M50
PROFIBUS MASTER + 512kByte
590,-
955-C000S50
PROFIBUS SLAVE + 512kByte
465,-
955-C000060
1024kByte
590,-
955-C000M60
PROFIBUS MASTER + 1024kByte
790,-
955-C000S60
PROFIBUS SLAVE + 1024kByte
665,-
955-C000070
1536kByte
790,-
955-C000M70
PROFIBUS MASTER + 1536kByte
990,-
955-C000S70
PROFIBUS SLAVE + 1536kByte
865,-
VIPA 015-CEFPR01
955-C000M00
955-C000S00
649,-
VIPA 017-CEFPR00
on request
9
PLC
SLIO– The smart I/O system
Bus Terminals
Demand for a more compact and flexible automation
solutions with a reasonable price-performance ratio
has been constantly increasing. With the development
of the completely new I/O system SLIO®, VIPA is setting
a new standard in the automation sector.
The VIPA I/O system SLIO combines high functionality
with an intelligent mechanical concept and an extremely
compact design.
SLIO® is a synonym for slice-I/O. With its very compact
design, the system can be set-up “step by step” to
exactly meet the requirements of the application.
The Interface Modules (IM) for PROFIBUS-DP, CANopen,
PROFINET, EtherCAT and Modbus can support up to
64 Electronic Modules (EM).
The Power Modules (PM), which are contrasting in
color to Signal Modules (SM) and Function Modules
(FM), supply voltage to the Electronic Modules.
Decoupled potential groups can be defined if required.
The Electronic Modules are connected to the Terminal
Module TM using a secure plug-in mechanism. The
Terminal Module is comprised of a clamp, connection
of Electronic Modules and mechanical bus connector.
Therefore, if maintenance or repair are required, only
the Electronic Module will have to be exchanged by
simply pulling it out of the Terminal Module. Wiring
and mounting on the 35mm DIN rail will remain
unchanged.
The staircase-shaped cage, which clamps on the
Terminal Module offers fast, clear, and secure wiring.
With the integrated status-LEDs and the labeling strip
on the front, an exact state monitoring of channels
on the Electronic Module is possible.
The new backplane bus system with a transmission
rate of 48Mbit/s offers very short response times
with a signal processing of less than 20µs.
SLIO® is one of the most powerful and cost-effective
decentralized systems available in the market.
INTERFACE-MODULE (IM)
the space-saving Interface-Module represents the interface between
process level and bus system. All control signals are transmitted to
the Electronic Module through the internal backplane bus.
• Supports various fieldbus systems
• Exchangeable Power Module, easy-to-maintain
• Functional DIP-switch for address setting for PROFIBUS-DP
and CAnopen with transparent cover
• IP addressing in clear text on the front
• Potential decoupling between fieldbus and input/output level • Up to 64 Signal and Function Modules per Interface Module
SIGNAL-MODULE (SM)
Electronic Module for connection of sensors and actuators, registration of
digital and analog signals in and out of the process.
• Direct allocation and monitoring of channel states via status LEDs • Secure and time-saving installation due to terminal assignment on the
module
• Item designation will remain unchanged in case of module exchange • Individual labelins of channels with blank strips
CLEVER AND
USER-FRIENDLY LABELLING
• Status-LEDs with direct allocation on the labelins strip
• terminal assignment and connection diagrams on each module
• Item designation will remain unchanged in case of module exchange
• Blank strips for individual labeling of modules
CLEAR STATUS MONITORING
AND DIAGNOSIS
• Indication of diagnosis and channel states via LEDs
• Clear allocation and indication of channel states
• Secure and time-saving installation and maintenance through terminal
assignment printed on the module
PERFORMANCE-ORIENTED BACKPLANE BUS
• One terminal Module for all Signal and Function Modules
• transmission rate 48Mbit/s
• Fast response time of 20µs upwards
• Detailed diagnosis of each Electronic Module in the system
FUNCTION-MODULES (FM)
SPACE AND TIME-SAVING CONNECTION TECHNOLOGY
Electronic Module for realization of automation requirements, e.g. fast
counting. For measuring and positioning the following function modules
will complement the SLIO® system in the future:
• Space-saving staircase-shaped wiring with cage clamps
• Quick pre-wiring due to separate installation level
• Easy module exchange due to standing wiring
• High modularity due to 2, 4 and 8 channel modules
• SSI-Module • Counter-Module • Others in preparation
POWER-MODULE (PM)
Power Module for refreshing of backplane bus power. the double-componentdesign ensures easy maintenance due to the separation of electronics from
the terminal Module.
• Decoupling of potential groups
• Voltage supply on sensor/actuator level
• Mounting security due to reverse-connect and overvoltage protection
EASY INSTALLATION AND MAINTENANCE
1 DC 24V for power
sec tion supply I/O area
(max. 10A via
0AA00/1AB00)
2 DC 24V for electronic
power supply bus
coupler
• two-component modules with terminal Module and Electronic Module
for easy maintenance
• Easy mounting due to plug-in mechanism
• Click-connection for fast mounting of shield connection
• Protection against wrong combination of terminal- and Electronic-Modules per encoding
10
3 DC 24V for power
section supply I/O area
(max. 4A via 1AB10)
4 DC 24V for electronic
power supply bus
coupler
PLC
SLIO– The smart I/O system
Bus Terminals
INTERFACE-MODULE (IM)
INTERFACE-MODULES
Order No.:
INCL. 007-0AA00 POWER-MODULE
PRICE
Name / Technical data
in Euro
053-1CA00 IM 053CAn / CAnopen-Slave, max. PB (parameterbytes): 128
053-1DN00 IM 053Dn / Devicenet-Slave, max. PB (parameterbytes): 256
053-1DP00 IM 053DP / PROFIBUS-DP-Slave, max. PB (parameterbytes): 244 136,136,136,-
053-1PN00 IM 053Pn / PROFInEt-IO slave transfer rate 100MBd, PB: 512
053-1EC00 IM 053EC / EtherCAt-slave transfer rate 100MBd, PB: 4kB
204,-
053-1MT00 IM 053nEt / Modbus-/tCP/IP slave, adjustable I/O cycle 0.5..4msec
053-1IP00 IM 053Mt / Ethernet/IP-Slave, PB (Parameterbytes): 512
136,-
060-1AA00 IM 060
061-1BA00 IM 061
116,170,-
/ Line Extension, Master
101,-
/ Line Extension, Slave
163,-
the space-saving Interface-Module represents the interface between
process level and bus system. All control signals are transmitted to
the Electronic Module through the internal backplane bus.
• Supports various fieldbus systems
• Exchangeable Power Module, easy to maintain
• Functional DIP-switch for address setting for PROFIBUS-DP, PROFInEt
and CAnopen with transparent cover
• IP addressing in clear text on the front
• Potential decoupled between fieldbus
and input/output level • Up to 64 Signal and Function Modules
per Interface Module
FUNCTIONS-MODULES
Order No.:
050-1BA00
050-1BA10
050-1BB00
050-1BB30
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
FM 050 - Counter module / Counter 1x32Bit (AB), DI 24VDC, up to 100kHz,
DO 1x 24VDC/0,5A, Gate-, Latch-, Reset-Connector, Alarm, Diagnose
FM 050 - Counter module/Counter 1x32Bit (AB), DI 5VDC, up to 500kHz
Differential signal, Reset-Connector, Alarm, Diagnose
FM 050 - Counter module/Counter 2x32Bit (AB), DI 24VDC, up to 100kHz
Alarm, Diagnose
169,169,169,-
FUNCTION-MODULES (FM)
127,-
FM 050 - ECO Counter module/Counter 2x32Bit (AB), DI 24VDC, up to 100kHz
050-1BB40
FM 050 - Counter module/Frequenz 2x24Bit (AB), DI 24VDC, up to 600kHz
169,-
050-1BS00
FM 050S - SSI-Modul / 1xSSI, RS422, 24/32 Bit, 100/300/600kBit/s
180,-
Electronic Module for realization of automation requirements,
e.g. fast counting. For measuring and positioning the
following function modules will complement the SLIO®
system in future:
• SSI-Module • Counter-Module
• Others in preparation
MOTION-MODULES
Order No.:
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
054-1BA00
FM 054 - stepper module / 1-channel with feedback, 2 outputs 24VDC/1,5A, 2 inputs 24 VDC, current control frequency 32 kHz,
step pattern 64-times microstepping 246,-
054-1CB00
FM 054 - DC-motor module / 2-channel with feedback, 2 outputs 24VDC for 2x 1,5A DC motors, 2 inputs 24 VDC, PWM clock frequency 32 kHz
246,-
054-1DA00
FM 054 - Pulse train output module / 1-channel RS422 with feedback,
2 outputs A/B phase 24 VDC, 2 inputs VDC, 0 to 1.000 kHz
204,-
COMMUNICATION-MODULES
Order No.:
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
040-1BA00
CP 040 - Communication processor, RS232 interface Communication: ASCII, 3946R, ModbusRtU/ASCII (Master/Slave,
short/long) lenth of telegram: max. 250Byte, up to 250 telegrams receive-/send buffer: 1024Byte
209,-
040-1CA00
CP 040 - Communication processor, RS422/485 interface,
Communication: ASCII, 3946R, ModbusRtU/ASCII (Master/Slave,
short/long) lenth of telegram: max. 250Byte, up to 250 telegrams receive-/send buffer: 1024Byte
209,-
POTENTIAL DISTRIBUT0R-MODULES
MAX. TERMINAL CURRENT 10A
PRICE
Order No.:
001-1BA00
Name / Technical data
Potential distributor module 24V/8xDC +24V clamps
in Euro
17,-
001-1BA10
Potential distributor module 24V/8xDC 0V clamps
17,-
001-1BA20
Potential distributor module 24V/4xDC +24V and 4xDC 0V terminals
17,-
POWER-MODULES
INCL. 001-0AA00 TERMINAL-MODULE
Order No.:
Name / Technical data
PRICE
in Euro
007-1AB00
Power Supply connection module, DC 24V, max. 10A
17,-
007-1AB10
Power Supply connection module, DC 24V, max. 4A
with integrated power supply 5V/2A for the internal electronics
113,-
Order No.:
POTENTIAL DISTRIBUTOR-MODULES
PRICE
Name
in Euro
950-0KD30
SLIO Line Extension Cable, length: 2m, 2x RJ45
17,-
290-1AF00
35 mm Alu DIn-Profile Rail, Length: 2000mm
54,-
290-1AF30
35 mm Alu DIn-Profile Rail, Length: 530mm
18,-
000-0AB00
SLIO Shield Bus Carrier, 10 pieces
10,-
11
PLC
SLIO– The smart I/O system
Bus Terminals
SIGNAL-MODULES DIGITAL INPUT
Order No.:
SIGNAL-MODULE (SM)
Electronic Module for connection of sensors and actuators, registration
of digital and analog signals in and out of the process.
• Direct allocation and monitoring of channel status via state LEDs • Secure and time-saving installation due to terminal assignment on
the module
• Item designation will remain unchanged in case of module exchange • Individual labeling of channels with blank strips
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
021-1BB00
SM 021 - Digital input / DI 2xDC 24V
22,-
021-1BB50
SM 021 - Digital input / DI 2xDC 24V, nPn
28,-
021-1BD00
SM 021 - Digital input / DI 4xDC 24V
28,-
021-1BD40
SM 021 - Digital input / DI 4xDC 24V (4x2/3--wire)
30,-
021-1BD50
SM 021 - Digital input / DI 4xDC 24V, nPn
30,-
021-1BF00
SM 021 - Digital input / DI 8xDC 24V
44,-
021-1BF01
SM 021 - Digital input / DI 8xDC 24V, 0,5 ms
SM 021 - Digital input / DI 8xDC 24V, nPn
SM 021 - Digital input / DI 8xDC 24V, wiring diagnosis
Digital input SM 021, DI 2 x speed inputs, input filter time delay parameterized 2μs ... 4ms, PB: 9
49,-
021-1BF50
021-1DF00
021-1BB10
021-1BD10
Digital input SM 021, DI 4 x fast inputs, input filter
time delay parameterized 2μs ... 4ms, PB: 11
44,68,81,133,-
SIGNAL-MODULES DIGITAL OUTPUT
Order No.:
SPACE AND TIME-SAVING CONNECTION TECHNOLOGY
• Space-saving staircase-shaped wiring with cage clamps
• Quick pre-wiring due to separate installation level
• Easy module exchange due to standing wiring
• High modularity due to 2, 4 and 8 channel modules
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
022-1BB00
SM 022 - Digital output / DO 2xDC 24V, 0,5A
27,-
022-1BB50
SM 022 - Digital output / DO 2xDC 24V, 0,5A, nPn
32,-
022-1BB20
SM 022 - Digital output / DO 2xDC 24V, 2A
SM 022 - Digital output / DO 2xDC 30V/AC 230V, 3A
relays, potential decoupled per channel
44,-
022-1HB10
42,-
022-1HD10
SM 022 - Digital output / DO 4xDC 30V/AC 230V, 1,8A
relays, potential decoupled per channel
64,-
022-1BD00
SM 022 - Digital output / DO 4xDC 24V, 0,5A
38,-
022-1BD50
SM 022 - Digital output / DO 4xDC 24V, 0,5A, nPn
38,-
022-1BD20
SM 022 - Digital output / DO 4xDC 24V, 2A
48,-
022-1BF00
SM 022 - Digital output / DO 8xDC 24V, 0,5A
48,-
022-1BF50
022-1DF00
022-1BB90
SM 022 - Digital output / DO 8xDC 24V, 0,5A, nPn
SM 022 - Digital output / DI 8xDC 24V, 0,5A, wiring diagnosis
SM 022 - PWM - Digital output / DO 2xDC 24V, 0,5A, max. 40kHz, PB: 12
48,75,130,-
ETS TIMESTAMP SYSTEM
There are digital input and output modules with order
memory (FIFO) available to buffer the signal edges. These
terminals are marked with the abbreviation ETS (Edge
Timestamp System). SLIO ETS offers a temporary significantly improved exactness at the µs area for all supported
fieldbus systems.
ETS SIGNAL-MODULES DIGITAL
Order No.:
021-1BB70
022-1BB70
021-1BD70
THE SAFETY MODULES FOR SLIO:
• 4-channel or 2-channel inputs and outputs for higher Safety requirements (SIL3)
• Digital signals: 24 V
• Used Safety protocol: PROFIsafe for PROFIBUS and PROFInEt
• Up to 4095 Safety modules in an equipment possibly
• Safe parameters: Input delay, change-over between one and
two channel analysis, channel activation a.s.o.
• Response times <10 ms
• Registration to SIL3 (Safety Integrity level) and PL e (performance level)
12
022-1BD70
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
EtS Digital input SM 021, DI 2 x 24VD, PB: 10
EtS-Buffer: 15 time stamps, time resolution: 1μsec
EtS Digital output SM 022, DO 2 x 24VDC/0,5A, PB: 6 EtS-Buffer: 15 time stamps, time resolution: 1μsec
EtS Digital input SM 021, DI 4 x 24VDC, PB: 12 EtS-Buffer: 15 time stamps, time resolution: 1μsec
EtS Digital output SM 022, DO 4 x 24VDC/0,5A, PB: 6
EtS-Buffer: 15 time stamps, time resolution: 1μsec
95,101,149,165,-
SAFETY-MODULES
Order No.:
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
021-1SD00
SM 021 - SAFEtY Digital input / DE 4xDC 24V, PB: 44
165,-
022-1SD00
SM 022 - SAFEtY Digital output / DA 4xDC 24V/0,5A, PB: 44
187,-
PLC
SLIO– The smart I/O system
Bus Terminals
SIGNAL MODULES ANALOG
SIGNAL-MODULES ANALOG INPUT 12BIT
Order No.:
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
031-1BB30
SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA
supply 2x 35mA for 2x 2-wire sensors integrated, PB: 15
SM 031 - Analog input / AI 2x12Bit, 0 - 10V, PB: 6 031-1BB40
SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA, PB: 6
126,-
031-1BB60
SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA, sensor, PB: 6
126,-
031-1BB70
SM 031 - Analog input / AI 2x12Bit, -10V ... +10V, PB: 6
126,-
031-1BD30
SM 031 - Analog input / AI 4x12Bit, 0 - 10V, PB: 8 136,-
031-1BB10
126,126,-
031-1BD40
SM 031 - Analog input / AI 4x12Bit, (0) 4 - 20mA, PB: 8
136,-
031-1BD70
SM 031 - Analoge input / AI 4x12Bit, -10V ... +10V, PB: 8 136,-
031-1BF60
SM 031 - Analog input / AI 8x12Bit, (0) 4 - 20mA, PB: 10
164,-
031-1BF74
SM 031 - Analoge input / AI 8x12Bit, -10V ... +10V, PB: 10
164,-
Signal modules (SM) to connecting sensors and actuators
are the interfaces of the system to the process. Analog
signal modules acquire the analog control signals (e.g.
measurement data) to and out of the process level.
Depending on the application and type the control signals
are acquired from the process level and converted into
interpretable signals for controlling. Analog output modules
convert the internal control signals into signals suitable
for the process level.
SIGNAL-MODULES ANALOG INPUT 16BIT
Order No.:
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
031-1CB30
SM 031 - Analog input / AI 2x16Bit, 0 - 10V, PB: 20 148,-
031-1CB40
SM 031 - Analog input / AI 2x16Bit, (0) 4 - 20mA, PB: 20
148,-
031-1CB70
SM 031 - Analog input / AI 2x16Bit, -10V ... +10V, PB: 20
148,-
031-1CD30
SM 031 - Analog input / AI 4x16Bit, 0 - 10V, PB: 32
158,-
031-1CD35
SM 031 - Analog input / AI 4x16Bit, 0 - 10V, PB: 9
158,-
031-1CD40
SM 031 - Analog input / AI 4x16Bit, (0) 4 - 20mA, PB: 32
158,-
031-1CD45
SM 031 - Analog input / AI 4x16Bit, (0) 4 - 20mA, PB: 9
158,-
031-1CD70
SM 031 - Analog input / AI 4x16Bit, -10V ... +10V, PB: 32
158,-
031-1BD80
SM 031 - Analog input / AI 4x16Bit, R, RtD (2x3/4-wire),
Pt100/Pt1000, ni100/ni1000, 0 - 3000 Ohm, PB: 34
192,-
031-1LD80
SM 031 - Analog input / AI 4x16Bit, R, RtD (2x3/4-wire),
Pt100/Pt1000, ni100/ni1000, 0 - 3000 Ohm, PB: 12
192,-
031-1BB90
SM 031 - Analog input, AI 2x16Bit, tC (-80mV..+80mV), thermocouplertyp B, C, E, J, K, L, n, R, S, t, PB: 22
165,terminal Module 001-0AA20 with temperature compensation included
031-1LB90
SM 031 - Analog input, AI 2x16Bit, tC (-80mV..+80mV), 165,thermocouplertyp B, C, E, J, K, L, n, R, S, t, PB: 10
terminal Module 001-0AA20 with temperature compensation included
031-1CA20
SM 031 - DMS-Module, single channel, full bridge, 16 (24) Bit
auto/self calibration, parallel operation of load cells, onboard power supply 2,5V, 5V, 7,5V, 10V, 12V
235,-
A variety of different analog signal modules accurately
provide the inputs and outputs that are required for each
task. The analog modules differ in the number of channels,
voltage and current ranges, isolation, and diagnostic and
alarm capability.
SIGNAL-MODULES ANALOG OUTPUT 12BIT
Order No.:
INCL. 001-0AA00 TERMINAL MODULE
PRICE
CHARACTERISTICS
Name / Technical data
in Euro
• 2 or 4 channel with 12 bit or 16 bit resolution
032-1BB30
SM 032 - Analog output / AO 2x12Bit, 0 - 10V, PB: 8 134,-
• Functions of the inputs / outputs programmable
032-1BB40
SM 032 - Analog output / AO 2x12Bit, (0) 4 - 20mA, PB: 8
134,-
032-1BB70
SM 032 - Analog output / AO 2x12Bit, -10V ... +10V, PB: 8 134,-
032-1BD30
SM 032 - Analog output / AO 4x12Bit, 0 - 10V, PB: 10
144,-
• Most various assemblies, suitable for measuring
transducers (current/voltage, resistance or temperature
sensors)
032-1BD40
SM 032 - Analog output / AO 4x12Bit, (0) 4 - 20mA, PB: 10 144,-
032-1BD70
SM 032 - Analog output / AO 4x12Bit, -10V ... +10V, PB: 10 144,-
• Direct mapping and readability of the channel
conditions via status LEDs
• Safe and time-saving installation by the terminal
assignment mounted on the module
SIGNAL-MODULES ANALOG OUTPUT 16BIT
Order No.:
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
032-1CB30
SM 032 - Analog output / AO 2x16Bit, 0 - 10V, PB: 8
162,-
032-1CB40
SM 032 - Analog output / AO 2x16Bit, (0) 4 - 20mA, PB: 8 162,-
032-1CB70
SM 032 - Analog output / AO 2x16Bit, (0) 4 - 20mA, PB: 8
162,-
032-1CD30
SM 032 - Analog output / AO 4x16Bit, 0 - 10V, PB: 10
170,-
032-1CD40
SM 032 - Analog output / AO 4x16Bit, (0) 4 - 20mA, PB: 10
170,-
032-1CD70
SM 032 - Analog output / AO 4x16Bit, (0) 4 - 20mA, PB: 10 170,-
• When changing the module equipment identification
(BMK) is retained on the TM
• Individual single-channel lettering on insertion strip
13
PLC
SLIO– The smart I/O system
Bus Terminals
SLIO DMS-Modules
The SLIO DMS modules allows direct connection
of a resistor full bridge (DMS) or load cell in the
4- or 6-wire connection. Power supply already
integrated.
Typical fields of applications
DMS-MODULE
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
Order No.:
031-1CA20
SM 031 - DMS-Module, single channel, full bridge, 16 (24) Bit
auto/self calibration, parallel operation of load cells,
onboard power supply 2,5V, 5V, 7,5V, 10V, 12V
235,-
• Filling level monitoring of silotanks
and bunkers
• Measuring and determination of rope
and crane loads
• Force measuring, Container scales,
Platform scales, Crane scales
MOTION-MODULES
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
Order No.:
STEPPER Module
054-1BA00
FM 054 - stepper module / 1-channel with feedback,
2 outputs 24VDC/1,5A, 2 inputs 24 VDC, current control frequency 32 kHz,
step pattern 64-times microstepping
246,-
054-1CB00
FM 054 - DC-motor module / 2-channel with feedback,
2 outputs 24VDC for 2x 1,5A DC motors, 2 inputs 24 VDC,
PWM clock frequency 32 kHz
246,-
054-1DA00
FM 054 - Pulse Train Output Module / 1-channel RS422 with feedback,
204,2 outputs A/B phase 24 VDC, 2 inputs VDC, 0 to 1.000 kHz
Operating types
• Reference
• Positioning
• Speed control
DC-Motor module
Operating types
• Reference
• Positioning
• Speed / torque control
PulseTrain module
Operating types
RS422
SLIO Energiemess-Modul
• Reference
• Positioning
• Speed control
The module allows the measurement of electric data for
counting energy and power measurement. Here, the voltage
measurement of each phase is directly measured and the
current is measured indirectly via current transformers. In
consideration of the permissible total current, you can also
perform an energy measurement on devices, which are
within the same phase.
• 3-phase and neutral wires 230/400V 1A
• Retentive storage of the energy values
• Diagnostic function
• Resolution of the measured value 24bit
• The following measurements can be found in 4-quadrant
operation:
– Voltage, current
– Electrical power
– Electrical work
– Harmonics
– Phase shift cos phi
– Frequency
14
ENERGYMEASURE-MODULE
Order No.:
031-1PA00
INCL. 001-0AA00 TERMINAL MODULE
PRICE
Name / Technical data
in Euro
SM 031 - Energymeasure-Module, 1/3-phase, 230/400VAC
resolution measured value 24 bit, avialable measurement:
active energy, temperature, frequency, voltage RMS, current RMS,
active power, reactive power, apparent power, cos phi,
harmonic voltage RMS, harmonic current RMS
235,-
PLC
SPEED7-TECHNOLOGY – compatible SIEMENS S7-300
®
CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS
STEP ®7
TIA
VIPA 313-5BF23
STEP ®7
TIA
VIPA 313-6CF23
STEP ®7
TIA
VIPA 314-6CG23
STEP ®7
TIA
PRICE
Technical data
in Euro
CPU 312SC-SPEED7 technology DC 24V, incl. 128kByte (up to 1MByte),
MPI interface, SD slot, clock, 16DI, 16 of it for alarming, 8DO 24VDC/0,5A, 2x counter (10Khz) RS485 interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication.
HW identification: 6ES7312-5BE03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line
CPU 313SC-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte),
MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A, AI 4x12Bit(U/I), 1x12Bit(Pt100), AO 2x12Bit(U/I), 3x counter (30Khz), RS485 interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication.
HW identification: 6ES7313-5BF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line
CPU 313SC/DPM-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte),
MPI interface, SD slot, clock, 16DI, 16 of it for alarming, 16DO 24VDC/0,5A, 3x counter (30Khz), PROFIBUS-DP master/slaves with 12Mbps and up to 125 slaves, alternative RS485 interface with library for ASCII, StX/EtX, 3964R,
Modbus master protocols, Ethernet interface for PG/OP communication.
HW identification: 6ES7313-6CF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line
CPU 314SC/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2MByte),
MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A
+8 DI/O in adition, AI 4x12Bit(U/I), 1x12Bit(Pt100), AA 2x12Bit(U/I), 4x counter (60Khz),
PROFIBUS-DP master/slave with 12Mbps and up to 125 slaves, alternative RS485
interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols,
Ethernet interface for PG/OP communication.
HW identification: 6ES7314-6CG03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line
MCC-MEMORY CONFIGURATION CARD
VIPA 953-1LE00
VIPA 953-1LF00
VIPA 953-1LG00
VIPA 953-1LH00
VIPA 953-1LJ00
VIPA 953-1LK00
VIPA 953-1LL00
VIPA 953-1LM00
VIPA 953-1LP00
746,-
1.010,-
1.370,-
The MCC can’t be exchanged to a MCC with the same
memory configuration, but it can be used for the project
backup (Copy RAM > ROM). The shown MCC memory
value increases the already available basic memory of
the CPU by the value of the card. However, the maximum
memory shown of the CPU can’t be overridden, even if a
bigger memory extension is plugged in.
VIPA MCC offers the possibility to extend the RAM of
SPEED7 CPUs. The MCC is a specifically prepared MMC
(multimedia Card). Plug the MMC into the card slot and
execute an overall reset and the extension becomes
available. The MCC must remain plugged in, otherwise
the CPU switches to STOP after 48 hrs.
Order No.:
505,-
VIPA 313SC
VIPA 312-5BE23
SPEED7-CPUs
MEMORY CONFIGURATION CARD
PRICE
Additional memory extension:
in Euro
32kByte (16kByte program/16kByte data)
64kByte (32kByte program/32kByte data)
128kByte (64kByte program/64kByte data)
256kByte (128kByte program/128kByte data)
512kByte (256kByte program/256kByte data)
1MByte (512kByte programm/512kByte data)
2MByte (1MByte programm/1MByte data)
4MByte (2MByte program/2MByte data)
8MByte (4MByte program/4MByte data)
All cards have a minimum capacity of 512MByte and can be used
additional for programm backup.
98,147,217,309,488,731,1.023,1.509,2.240,-
VIPA 953-0KX10 € 122,MMC flashcard, 512MByte, only for
program back up, recommended if
no MCC-Card is used.
VIPA 313SC/DPM
Order No.:
Ethernet for PG communication, online maintenance and
OP communication are always on Board (PtP). The well
known serial system bus from the S7-300® series by
SIEMENS is completely supported and allows the use of
the S7-300® units of SIEMENS and VIPA. All important
certifications exist. The complete STEP®7/S7-300®
command set is available and was tested for full
accuracy, examined from an independent Test institute
in extensible test rows.
VIPA 314SC/DPM
VIPA CPUs and peripheral modules with the instruction
set S7-300® by Siemens are more than 20 times faster
than the similar S7-300® products. VIPA offers SPEED7,
the technology of tomorrow, based on a million times
proven STEP®7-programming platform. A flexible memory
management covers all possible applications from 64kByte
to 1MByte. Program and data are stored in one memory,
no extra loading memory is necessary. A pluggable
MMC/SD-Card-Card allows configuration as well as project
and data saving in a FAT16 format compatible with PC.
VIPA 312SC
SPEED7 BY VIPA – VERY FAST
STEP®7 / TIA PROGRAMMABLE CPUs
17
PLC
SPEED7-TECHNOLOGY – compatible SIEMENS S7-300
®
CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS
SPEED7 BY VIPA – VERY FAST STEP®7 / TIA PROGRAMMABLE CPUs
VIPA CPUs and peripheral modules with instruction set S7-300®/S7-400® by Siemens
are faster than the currently strongest S7-300®, S7-400® systems. VIPA offers
SPEED7, the technology of tomorrow, based on a million times proven STEP®7programming platform. A flexible memory management covers all possible applications from 64kByte to 8MByte. Program and data are stored in one memory, so
no extra loading memory is necessary. A pluggable MMC/SD-Card allows configuration as well as project and data security in a FAT16 format compatible with PC.
PROFIBUS-DP master or optional master CANopen and Ethernet for PG communication, on-line maintenance and OP communication are al ways on Board (PtP).
In addition, an EthernetCP is able to become integrated directly into the CPU cabinet,
compatible with CP343, 10/100Mbps.
The well known serial system bus from the S7-300 ® series by Siemens is
completely supported and allows the use of the S300® units of SIEMENS and VIPA.
Not only are 8 modules able to be switched on, but also the CPUs support to drive
up to 32 modules in a line.
All relevant certifications exist. The complete STEP®7/S7-300®/400®er command
set is available and has been examined by an independent test institute in
extensible test rows to ensure complete accuracy.
120mm
Order No.:
VIPA 314-2BG23
125mm
40mm
VIPA 315SB
STEP ®7
TIA
VIPA 314-2AG23
STEP ®7
TIA
SPEED7-CPUs
PRICE
Technical data
in Euro
CPU 314SE/DPS-SPEED7 technology, DC 24V, incl. 256kByte (up to 1MByte), MPI-interface, SD-slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP-Slave or RS485, PtP-Communication for ASCII-, StX/EtX-, 3964R-, ModbusRtU master protocol with library. 32 I/O-units per line
HW identification: 6ES7315-2AG10-0AB0/V2.6 + 6GK343-1EX11-0XE00
CPU 314SB/DPM-SPEED7 technology, DC 24V, incl. 512kByte (up to 1MByte), MPI interface, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per line
HW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00
513,-
922,-
On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0
VIPA 315-2AG23
STEP ®7
TIA
CPU 315SB/DPM-SPEED7 technology, DC 24V, incl. 1MByte (up to 4 MByte), MPI interface, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per line
HW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00
1.278,-
On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0
VIPA 315-4NE13
120mm
STEP ®7
TIA
CPU 315Sn/nEt-SPEED7 technology, DC 24V, 1MByte (up to 2 MByte),
MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication, PROFIBUS-DP master, 12MBd, up to 125 Slaves, add. integrated Ethernet-CP 343 with 1.834,RFC1006, tCP/IP and S7 communication for 8 connections. 32 I/O-units per line
HW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00 + 6GK343-1EX21-0XE00
On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0
VIPA 315-4PN23
STEP ®7
TIA
125mm
80mm
18
VIPA 315SN
VIPA 315-4PN43
STEP ®7
TIA
315Sn/nEt-SPEED7 technology, DC 24V, incl. 1MByte (up to 2 MByte),
MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication, PROFInEt- & PROFIBUS-DP master, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP and S7 communication for 8 connections. 32 I/O-units per line
HW identification: 6ES7315-2EH13-0AB0 + 6GK343-1EX11-0XE00
315Sn/nEt-SPEED7 technology, DC 24V, incl. 512kByte, MPI interface,
SD slot, clock, Ethernet interface for PG/OP-Communication, PROFInEt-master, additional integrated Ethernet-CP 343 with RFC1006, tCP/IP and S7 communication for 8 connections. RS485 interface with library for ASCII, StX/EtX, 3964R, Modbus master protocols. 32 I/O-units per line
HW identification: 6ES7315-2EH13-0AB0 V2.6 + 6GK343-1EX11-0XE00
1.834,-
997,-
PLC
SPEED7-TECHNOLOGY – compatible SIEMENS S7-300
®
CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS
SYSTEM COMPONENTS FOR SPEED BUS
To be able to use the high-speed system performance fully, up to 10 VIPA modules
with the new VIPA 32bit highspeed-bus (40 MByte/s) can be connected to the left
side of the CPU. Very fast E/A units and counters as well as PROFIBUS-DP master and
Order No.:
VIPA 314-6CF23
STEP ®7
TIA
Interbus master units are available. Any of the VIPA High-Speed CPUs will be
connected to the SPEED Bus rail. With the Standard-Bus, any VIPA or Siemens
modules can quickly and easily be placed to the right.
SPEED7-CPUs FOR SPEED-BUS
PRICE
Technical data
in Euro
CPU 314St/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2 MByte), MPI interface,SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, DI 8-16 / DO 8-0, AI 4, AO 2, 1 Pt100, 4 counters (100 kHz),
1.329,PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves. 32 I/O-units per line
HW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00
®
On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0
VIPA 317-4NE23
STEP ®7
TIA
VIPA 317SN
CPU 317SE/DPM-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication,
PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves. 1.988,VIPA 317-2AJ23
32 I/O-units per line
STEP 7
TIA
HW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00
VIPA 314ST
On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0
CPU 317Sn/nEt-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master, 12MBd, up to 125 Slaves, 3.060,additional integrated Ethernet-CP 343 with RFC1006, tCP/IP, S7 communication for max. 64 connections. 32 I/O-units per line
HW identification: 6ES7317-2AJ10 -0AB0/V2.6 + 6GK343-1EX11-0XE00 + 6GK343-1EX21-0XE00
On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0
SPEED BUS PERIPHERAL MODULES
Order No.:
Technical data
PRICE
in Euro
VIPA 342-1CA70
Speed bus, CAnopen master RS485, 320 Bytes, up to 127 CAn knots.
763,-
VIPA 342-1DA70
Speed bus, PROFIBUS-DP master RS485, 12 MBaud, up to 125 Slaves.
814,-
VIPA 342-1IA70
Speed bus, interbus master, RS422, Dual port master,
up to 512 subscribers, number of the process data: In 1920 binary I/Os.
814,-
VIPA 342-2IA71
Speed bus, 2x interbus master, 2x RS422, Dual port master,
up to 512 subscribers, number of the process data: In 1920 binary I/Os.
1.432,-
VIPA 343-1EX71
SPEED-Bus, CP343S tCP/IP-Ethernet CP, S7 communication, RFC1006, H1, tCP/IP, UDP, up to 16 connections. 1.103,-
VIPA 321-1BH70
SM 321S-FASt SPEED-Bus, digital input DI 16xDC 24V, 2,56µs to 40ms adjustable.
SM321S-FASt SPEED-Bus, digital output tH 16x DC 24 V, 0.5A, 100kHz
216,-
VIPA 323-1BH70
n.M. 321S-FASt speed bus, digital input DI/O 16xDC24V, digital output DO
0,5A, 100 kHz, 2.56 µs to 40ms adjustable.
238,-
SM 331S-FASt SPEED-Bus, analog supported input AI 4x16Bit, 100µsec per channel,
+/- 20mA, adjustable 32 kByte cache memories per channel after trigger. VIPA 331-7BF70
n.M. 331S-FASt speed bus, analog input AI 8x16Bit, 100 µs per channel,
+/-10 V, adjustable 32 kByte cache memory per channel after trigger. VIPA 307-1FB70
PS307 power supply unit, only for SPEED-BUS units,
Input:110...240VAC, Output: 24VDC, 6...12A
SPEED BUS PROFILE RAILS
in Euro
195,-
VIPA 322-1BH70
VIPA 331-7AF70
Order No.:
VIPA 343-1EX71
®
VIPA 342-1CA70
3.060,-
VIPA 322-1BH70
CPU 317Sn/nEt-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, PROFInEt & PROFIBUS-DP-Master, VIPA 317-4PN23
additional integrated Ethernet-CP 343 with RFC1006, tCP/IP, S7 communication for max. 16 connections. 32 I/O-units per line
STEP 7
TIA
HW identification: 6ES7317-2EK13-0AB0 + 6GK343-1EX11-0XE00
693,693,-
PRICE
VIPA 391-1AF10
530 mm for 2 high-speed extension slots
142,-
VIPA 391-1AF30
530 mm for 6 high-speed extension slots
171,-
VIPA 391-1AF50
530 mm for 10 high-speed extension slots
193,-
VIPA 391-1AJ10
830 mm for 2 high-speed extension slots
142,-
VIPA 391-1AJ30
830 mm for 6 high-speed extension slots
171,-
VIPA 391-1AJ50
830 mm for 10 high-speed extension slots
193,-
SPEED BUS POWER SUPPLY
161,-
19
PLC
SYSTEM 300V – compatible SIEMENS S7-300
®
Modules – I/O-Modules, CPs & Fieldbus-Units
PROFIBUS SLAVE ADAPTOR
PRICE
Technical Data
in Euro
DP-Slave, 1 DP-connection, DP-V0, V1, max. 32 units / lines
204,-
Order No.:
VIPA 353-1DP01
COMMUNICATION PROCESSORS
PRICE
Technical Data
in Euro
720,-
Order. No.:
VIPA 341-1AH01
RS232, SubD 9 pol., potential decoupled, ASCII, 3964R
VIPA 341-1CH01
RS422/485, SubD 9 pol., potential decoupled, ASCII, 3964R
774,-
VIPA 343-2AH10
AS-i-Master, Profil M3, max. 62 Slaves
510,-
VIPA 353-1DP01
VIPA 343-2AH10
Identification
SIEMENS
VIPA 341-1CH01
Order No.:
VIPA
ANALOG INPUT/OUTPUT
PRICE
Technical data
in Euro
6ES7 331-1KF01-0AB0 VIPA 331-1KF01
Analog input, 8x13Bit, 4 conductors, ±50, ±500mV, ±1, ±5, ±10V, 1...5V, 0...10V,
±20mA, 0...20mA, 4...20mA, 0...600/6000Ohm, Pt100, ni100/1000
328,-
6ES7331-7KB01-0AB0 VIPA 331-7KB01
Analog input, 2x14Bit ±80, ±250, ±500mV, ±1V, ±2,5V, ±5V, ±10V, 1...5V,
10MOhm, ±10mA, ±20mA, ±3,2mA, 0...20mA, 4...20mA,150/300/600 Ohm, Pt100, ni100, thermocouples J,R,K,n,L,E,t,S,B,C
183,-
6ES7331-7KF01-0AB0
VIPA 331-7KF01
Analog input, 8x14Bit ±80, ±250, ±500mV, ±1V, ±2,5V, ±5V, ±10V, 1...5V, 10MOhm, ±10mA, ±20mA, ±3,2mA, 0...20mA, 4...20mA,150/300/600 Ohm, Pt100, ni100, thermocouples J,R,K,n,L,E,t,S,B,C
468,-
6ES7332-5HB01-0AB0 VIPA 332-5HB01
Analog output, 2x 13Bit, 0...10V, ±10V, 1...5V, 4...20mA, ±20mA, 0...20mA. Default value can be activated at PLC stop
305,-
6ES7332-5HD01-0AB0 VIPA 332-5HD01
Analog output, 4x 13Bit, 0...10V, ±10V, 1...5V, 4...20mA, ±20mA, 0...20mA. Default value can be activated at PLC stop
390,-
6ES7334-0KE00-0AB0
Analog input/output, 4 input/12Bit, 0...10V, Pt100 (RtD-4L), 0...10kOhm, 2 output/12Bit, 0...10V
288,-
VIPA 334-0KE00
VIPA 332-5HD01
VIPA 321-1BH01
DIGITAL INPUT
VIPA 322-1BL00
40mm
Identification
SIEMENS
Order No.:
VIPA
6ES7321-1BH01-0AA0
VIPA 321-1BH01
6ES7321-1BL00-0AA0
VIPA 321-1BL00
6ES7321-1FH00-0AA0
VIPA 321-1FH00
Inputs
16
24VDC
32
24VDC
16
120/230VAC
PRICE
in Euro
20
Order No.:
VIPA
Inputs &
Outputs
Order No.:
VIPA
Outputs
PRICE
in Euro
239,-
8 trans. outputs
140,24VDC/2A
16 trans. outputs
6ES7322-1BH01-0AA0 VIPA 322-1BH01
165,24VDC/1A
162,-
6ES7322-1BH01-0AA0 VIPA 322-1BH41
16 trans. outputs
212,24VDC/2A
6ES7322-1BL00-0AA0
32 trans. outputs
331,24VDC/1A
119,-
DIGITAL INPUT AND OUTPUT
Identification
SIEMENS
DIGITAL OUTPUT
Identification
SIEMENS
PRICE
in Euro
6ES7323-1BH01-0AA0 VIPA 323-1BH01
8/8
182,-
6ES7323-1BL00-0AA0 VIPA 323-1BL00
16/16
309,-
6ES7322-1BF01-0AA0
VIPA 322-1BF01
VIPA 322-1BL00
6ES7322-1HH01-0AA0 VIPA 322-1HH00 16 Rel. outputs
24VDC/230V/5A
246,-
8 triac. outputs
120/230VAC/2A
227-
6ES7322-5FF00-0AB0
VIPA 322-5FF00
16 trans. outputs
6ES7323-1BL00-0AA0 VIPA 322-1BH60 1 input manual
854,16 switsches A/H
PLC
SYSTEM 300V – compatible SIEMENS S7-300
®
Accessories – memory cards, profile rails, connectors, power supplies
MMC-FLASHCARD
Best. Nr.:
VIPA 953-0KX10
Order No.:
VIPA 953-1LE00
VIPA 953-1LF00
VIPA 953-1LG00
VIPA 953-1LH00
VIPA 953-1LJ00
VIPA 953-1LK00
VIPA 953-1LL00
VIPA 953-1LM00
VIPA 953-1LP00
512MByte flashcard, only for program back-up,
recommended if no MCC-Card is used.
PRICE
in Euro
122,-
MEMORY CONFIGURATION CARDS
PRICE
Additional memory extension:
in Euro
32kByte (16kByte program/16kByte data)
64kByte (32kByte program/32kByte data)
128kByte (64kByte program/64kByte data)
256kByte (128kByte program/128kByte data)
512kByte (256kByte program/256kByte data)
1MByte (512kByte programm/512kByte data)
2MByte (1MByte programm/1MByte data)
4MByte (2MByte program/2MByte data)
8MByte (4MByte program/4MByte data)
98,147,217,309,488,731,1.023,1.509,2.240,-
PRICE
Technical data
in Euro
VIPA 307-1BA00
Primary: 100-230VAC, Secondary: DC 24V, 2,5A
VIPA 307-1EA00
Primary: 100-230VAC, Secondary: DC 24V, 5A
131,-
VIPA 307-1KA00
Primary: 110...240VAC, Secondary: DC 24V, 10A
173,-
FRONT CONNECTOR
PRICE
Technical data
in Euro
Order No.:
VIPA 392-1AJ00
VIPA 392-1AM00
VIPA 922-3BC50
VIPA 922-3BD20
VIPA 922-3BF00
VIPA 922-6BC50
VIPA 922-6BD20
VIPA 922-6BF00
20-pole with screw contact
40-pole with screw contact
20-pole with 2,5m cable
20-pole with 3,2m cable
20-pole with 5,0m cable
40-pole with 2,5m cable
40-pole with 3,2m cable
40-pole with 5,0m cable
PROFILE RAILS
Order No.:
Length
max. mounting
VIPA 390-1AB60
VIPA 390-1AE80
VIPA 390-1AF30
VIPA 390-1AJ30
VIPA 390-1BC00
VIPA 390-9BC00
160mm
482mm
530mm
830mm
2000mm
2000mm
1 CPU / 1 Unit
1 CPU / 8 Unit
1 CPU / 10 Unit
1 CPU / 16 Unit
1 rail
ECO-stack, 10 rails
Best. Nr.:
105,-
PROGRAMMING ADAPTERS
VIPA 307-1EA00
POWER SUPPLIES
Order No.:
VIPA 307-1BA00
All cards have a minimum capacity of 512MByte and can be used
additionally for program back-up.
24,36,48,49,55,74,75,81,-
PRICE
in Euro
18,28,33,44,76,672,-
PRICE
in Euro
VIPA 950-0KB01
S7-MPI adaptor for PC/RS 232COM interfaces, automatic Baud rate setting 9.6 - 115 kBaud,
suitable for the use with StEP®7 by SIEMEnS, Cable length MPI 1.2m, serial cable 3m, Supply via CPU, PG interface.
202,-
VIPA 950-0KB31
S7-MPI adaptor for PC USB interface, incl. USB driver suitable for the use with StEP®7 of SIEMEnS,
Cable length MPI 1.2m, serial cable 3m,
supply via USB-interface. (Win7 32 bit)
256,-
VIPA 950-0KB31
21
PLC
SYSTEM 200V – STEP®7 programmable
Modular PLC-System – CPU-, Fieldbus-Interfaces
The CPUs of the system 200V need only 30% of the space required of the S7-300®
CPUs, but nevertheless operate with the full STEP®7 instruction set S7-315® by
SIEMENS.
Through the standard MPI interface via PG programming unit, PC adaptor and
operator panels from SIEMENS, ESA, ADVANTECH, VIPA a.s.o. can be connected.
To save the project, a custom MMC card can be used.
The RAM and Flash memory necessary for the operation are included in the CPU.
Additionally PROFIBUS-DP master, DP-Slave, RS232 interface or TCP/IP CP-unit
can be combined in different CPU variations. High memory sizes up to 128kByte
program memory and 192kByte load memory with short cycle times offer a big
area of application. A CPU can supply up to 32 units.
STEP ®7
Dimensions 1 slot
(H x W x D): 76 x 25,4 x 74mm
Dimensions 2 slots
(H x W x D): 76 x 50,8 x 74mm
TIA
CPU
CPU HW identification uniformly: 6ES7315-2AG10-0AB0/V2.6
Memory/
InterCPU 21x
Load memory
faces
Order No.:
PRICE
in Euro
VIPA 214-1BC06
VIPA 214-1BA06
VIPA 214-2BM06
VIPA 215-1BA06
VIPA 215-2BE06
VIPA 215-2BT16
361,410,725,724,754,1.030,-
STEP ®7
48/80kByte
96/144kByte
96/144kByte
128/192kByte
128/192kByte
128/192kByte
MPI
MPI
MPI/DP-Master
MPI
MPI / LAn (PG/OP)
MPI / LAn (CP343)
CPU
CPU HW identification uniformly: 6ES7315-2AF03-0AB0/V1.2
Memory/
InterCPU 21x
Order No.:
Load memory
faces
48/80kByte
MPI
VIPA 214-1BC03
96/144kByte
MPI
VIPA 214-1BA03
96/144kByte
MPI/LAn (PG/OP) VIPA 214-2BE03
96/144kByte
MPI / DP-Slave
VIPA 214-2BP03
96/144kByte
MPI / DP-Master
VIPA 214-2BM03
96/144kByte
MPI/CAnopen-Master VIPA 214-2CM03
96/144kByte
MPI / 2xRS232
VIPA 214-2BS03
96/144kByte
MPI / 1xRS232
VIPA 214-2BS13
96/144kByte
MPI / 1xRS485 VIPA 214-2BS33
96/144kByte
MPI / LAn (CP343)
VIPA 214-2BT13
128/192kByte
MPI
VIPA 215-1BA03
128/192kByte
MPI/LAn (PG/OP)
VIPA 215-2BE03
128/192kByte
MPI/DP-Slave
VIPA 215-2BP03
128/192kByte
MPI/DP-Master
VIPA 215-2BM03
128/192kByte
MPI/CAnopen-Master
VIPA 215-2CM03
128/192kByte
MPI / 2xRS232
VIPA 215-2BS03
128/192kByte
MPI / 1xRS232
VIPA 215-2BS13
128/192kByte
MPI / 1xRS485 VIPA 215-2BS33
128/192kByte
MPI / LAn (CP343) VIPA 215-2BT13
512MByte
MMC flash card
VIPA 953-0KX10
–
PG/AG-download cable
VIPA 950-0KB00
Order No.:
VIPA 253-1DP01
VIPA 253-1DP11
VIPA 253-1CA01
VIPA 253-1DN00
VIPA 253-1IB00
VIPA 253-1NE00
FIELDBUS-SLAVE INTERFACES
PRICE
Technical data
PROFIBUS-DP, address 1-99
PROFIBUS-DP, LWL, address 1-99
CAnopen, address 1-99
Devicenet, address 0-63
Interbus, to 16 modules
Ethernet, ModbustCP
in Euro
161,192,161,161,169,247,-
FIELDBUS-SLAVE ECO INTERFACES
PRICE
Technical data
in Euro
VIPA 253-1DP31
PROFIBUS DP-Slave, address 1-125, up to 8 units, DC 24 V, 12MBaud, DP-V0, DP-V1 138,-
VIPA 253-1CA30
CAnopen-Slave, adress 1-125, up to 8 units, DC 24V, 1MBaud 138,-
Order No.:
22
PRICE
in Euro
361,410,450,461,725,725,785,458,461,884,724,754,775,1.030,1.030,1.030,772,775,1.030,122,52,-
PLC
SYSTEM 200V – STEP®7 programmable
Modular PLC-System – I/O-Units, Accessories
Order No.:
FUNCTION MODULES
PRICE
Technical data
in Euro
VIPA 238-2BC00
SM 238C system expansion, 12 DI, 4 DI/A
24VDC 1A, 6 (16bits)/3 (32bits) of counter 30kHz,
3x AI 12 bits: ±10V/4 V/400mV/20 mA
and 4-20mA 1x AI 12 bits: Pt100 / 1000,
ni100/1000, 600/3000 ohm, 2xAA 12bits:
±10V/20 mA, 1-5V, 0-10V, 0-20mA, 4-20mA
311,-
VIPA 250-1BA00
2x32Bit / 4x16Bit incremental counter
inputs 24VDC, max. 1Mhz, 2xDA 24VDC/1A
247,-
VIPA 250-1BS00
1x12/24 bits of counter input SSI, RS422,
600kBd, 2xDA 24VDC /1A
264,-
VIPA 253-1BA00
Positioning-module for stepping motor
1 axis, RS422, potential decoupled
434,-
VIPA 254-1BA00
Positioning-module FM for servomotor, 1 axis, incremental encoder RS422, potential decoupled, tU 3xDC 24 V, tH 2xDC 24 V/1A
434,-
Order No.:
CP- MODULES
PRICE
Technical data
in Euro
VIPA 208-1DP01
PROFIBUS-DP master, up to 12Mbps, 100/200V
488,-
VIPA 240-1DA10
4 ports Ethernet Switch, 10/100Mbps,
autonegotiation, speed sensing, crossover
204,-
VIPA 240-1BA20
RS232, DB9, ASCII, 3964R, MODBUS RtU/ASCII
270,-
VIPA 240-1CA20
RS485, DB9, ASCII, 3964R, MODBUS RtU/ASCII
270,-
VIPA 240-1CA21
RS422/RS485, DB9, ASCII, 3964R, MODBUS RtU/ASCII
270,-
Order No.:
VIPA 240-1FA20
Order No.:
VIPA 240-1EA20
M-BUS
PRICE
Technical data
in Euro
Communication processor for M-Bus-system (Metering-Bus), 2-wire fieldbus for data acquisition of consumption, electrical isolated, up to 6 slaves possible.
Dimensions 1 slot
(H x W x D): 76 x 25,4 x 74mm
Dimensions 2 slots
(H x W x D): 76 x 50,8 x 74mm
270,-
ENOCEAN RADIOTRANSMITTER
PRICE
Technical data
Communication central processing unit for EnOcean, radio sensors, 868.3 MHz, SMA jack
in Euro
RADIOTECHNOLOGY FOR BUILDING AUTOMATION
EnOcean is a radio system without any power supply
which was developed in 2001 by the company EnOcean. Based on the short signal duration of 0.5ms and
10mW transmitting power the radio transmission technology has a very low power demand of only 50 µ Ws.
At this rate, the system uses energy from the smallest
changes of pressure or temperature for the electricity
supply of the sensors. The rangeof the sensors reaches
up to 300m distance outside.
270,-
VIPA 240-0EA00
EnOcean aerial for CP240,
direct mounting on module
57,-
VIPA 240-0EA10
EnOcean aerial for CP240,
magnet foot aerial incl. 1.5 m of cable
57,-
POWER PACKS & PASSIV TERMINALS MODULES PRICE
Order No.:
VIPA 207-1BA00
VIPA 207-2BA20
VIPA 201-1AA00
VIPA 201-1AA10
Technical data
prim. AC 100-240VAC/sec. 24VDC, 2A
prim. AC 100-230VAC/sec. 24VDC, 2A
± on 2x11 terminals red/blue
2x11 terminals, in each case for the
potential distribution, grey-grey
2x11 terminals, in each case for the
potential distribution, green/yellow-grey
in Euro
101,123,23,-
LINE EXTENTION
29,Order No.:
VIPA 201-1AA20
2x11 terminals, in each case for the
potential distribution, red/blue
29,-
VIPA 201-1AA40
2x5 terminals, gray-gray
2x6 terminals, red/blue
33,-
35 mm Alu DIn-Rail, Length: 530mm
18,-
VIPA 290-1AF30
VIPA 290-0AA10
VIPA 290-0AA20
VIPA 290-0AA40
VIPA 290-0AA80
BACK WALL BUS
PRICE
Modules
in Euro
1
2
4
8
4,7,12,21,-
Arbitrarily addable to max. 32 units.
Order No.:
VIPA 260-1AA00
VIPA 261-1CA00
VIPA 260-1XY05
VIPA 260-1XY10
VIPA 260-1XY25
Technical data
Basic module for CPU line,
max. 3 extensions
Interface modul for
extension line from 2. to 4.
cable connection 0.5 m
cable connection 1 m
cable connection 2.5 m
PRICE
in Euro
124,141,40,44,59,-
23
PLC
SYSTEM 200V – STEP®7 programmable
Modular PLC-System – I/O-Units, Accessories
DIGITAL INPUT
Order No.:
VIPA 221-1BF00
VIPA 221-1BF50
VIPA 221-1BF10
VIPA 221-1BF21
VIPA 221-1BH10
VIPA 221-1BH51
VIPA 221-2BL10
VIPA 221-1FD00
VIPA 221-1FF20
VIPA 221-1FF30
VIPA 221-1FF50
VIPA 221-1BH20
VIPA 221-1BF30
VIPA 221-1BH30
Dimensions 1 slot
(H x W x D): 76 x 25,4 x 74mm
Dimensions 2 slots
(H x W x D): 76 x 50,8 x 74mm
Order No.:
VIPA 222-1BF00
VIPA 222-1BF10
VIPA 222-1BF20
VIPA 222-1BF50
VIPA 222-1BH10
VIPA 222-1BH20
VIPA 222-1BH50
VIPA 222-2BL10
VIPA 222-1HF00
VIPA 222-1HD10
VIPA 222-1HD20
VIPA 222-1FF00
VIPA 222-1DB00
VIPA 222-1BF30
VIPA 222-1BH30
PRICE
Technical data
DI 8x DC 24V
DI 8x DC 24V, nPn
DI 8x DC 24V, 0,2ms
DI 8x, alarm DC 24V, 0,2ms
DI 16x DC 24V
DI 16x DC 24V, nPn
DI 32x DC 24V
DI 4x AC/DC 90...230V, potential decoupled
DI 8x AC/DC 60...230V
DI 8x AC/DC 24...48V
DI 8x AC 180...265V
DI 16x DC 24V, (2x counter)
DI 8x DC 24V, ECO
DI 16x DC 24V, ECO
in Euro
65,70,65,108,129,140,246,104,116,116,116,17760,108,-
DIGITAL OUTPUT
PRICE
Technical data
in Euro
76,87,97,82,151,189,121,284,103,70,106,153,125,70,124,-
DO 8x DC 24V, 1A
DO 8x DC 24V, 2A
DO 8x DC 24V, 2A, potential decoupled, (4 groups)
D0 8x DC 24V, 0.5A, nPn
DO 16x DC 24V, 1A
DO 16x DC 24V, 2A
DO 16x DC 24V, 0.5A, nPn
DO 32x DC 24V, 1A
DO 8x relay, 230VAC / 24VDC, 5A
DO 4x relay, galvanic decoupled, 230VAC/30VDC, 5A
DO 4x relay, galvanic decoupled, 230VAC/30VDC, 16A
DO 2x, solid-state, 230VAC/400VDC, 0.5A
DO 2x dimmer f. ohm., ind., cap. load, 230VAC/2A
DO 8x DC 24V, 0.5A, ECO
DO 16x DC 24V, 0.5A, ECO
DIGITAL INPUT AND OUTPUT
Order No.:
Technical data
VIPA 223-1BF00 DI/O 8x DC 24V, 1A, soft-configurable
VIPA 223-2BL10 DI/O 16x DC 24V and DO 16x DC 24V, 1A
ANALOG INPUT AND OUTPUT
PRICE
in Euro
92,279,-
PRICE
Order No.:
Technical data
in Euro
Analog input, 2 conductors/4x16Bit, 4 conductors/2x16 bits
VIPA 231-1BD53 Pt100, Pt/ni1000, niCrni, thermocouple, J, K, n, R, S, t 228,±10V, ±400mV, ±20mA, 4-20mA
Analog input, 4x12Bit, 0/4-20mA, VIPA 231-1BD60
341,potential decoupled channel
VIPA 231-1BD70
Analog input, 4x12Bit, ±10V, potential decoupled channel
VIPA 231-1BF00
Analog input 2conductor/8x16bits, 4conductor/4x16bits
378,Pt100, thermocouple J, K, t, 0-60mV
341,-
Analog input FASt, 4x16Bit, ±400mV, ±4V, ±10V,
VIPA 231-1FD00 ±20mA, 4-20mA, process and diagnosis alarm, average 386,value generation more than the last 2.4, 8 or 16 values
Cycle time 1ms for 4 channels VIPA 232-1BD51 Analog source module,4outputs 0-10V, ±10V,0-20mA,12bits 228,VIPA 234-1BD50
24
Analog input and output 2x12 bits of input, 2x12bits
291,of output, ±10V, 0-10V, 1-5V, ±20mA, 0-20mA, 4-20mA
3x AI 12bits: ±10V/4 V/400mV/20 mA and 4-20mA,
1x AI 12bits: Pt100/1000, ni100/1000, 600/3000 ohm,
VIPA 234-1BD60 2xAA 12bits: ±10V/20 mA, 1-5V, 0-10V, 0-20mA, 4-20mA,
Default value can be activated at PLC stop.
296,-
VIPA 231-1BD30 AI 4x12Bit, ±10V, ECO
138,-
VIPA 231-1BD40 AI 4x12Bit, 4..20mA, ±20mA, ECO
138,-
VIPA 232-1BD30 AO 4x12Bit, 0..10V, ±10V, ECO
145,-
VIPA 232-1BD40 AO 4x12Bit, 0/4..20mA, ECO
145,-
PLC
SYSTEM 100V – STEP®7 programmable
Micro PLC-Compact System – CPUs & I/O-Units
CPU HW identification uniformly:
6ES7 315-2AF03-0AB0/V1.2
MICRO-PLCs
Order No.:
memory/
loading memory
Technical Data
PRICE
in Euro
VIPA 112-4BH02
8/16kByte
8(12)DI/8(4)DO, 24VDC/0,5A, not extendable
239,-
VIPA 114-6BJ02
VIPA 114-6BJ03
VIPA 114-6BJ04
16/24kByte
24/32kByte
32/40kByte
16(20)DI (4DI with 30 kHz)/8(4)DO 24VDC/0,5A,
of it 2DO as an impulse output, extendable
304,369,423,-
VIPA 114-6BJ52
VIPA 114-6BJ53
VIPA 114-6BJ54
16/24kByte
24/32kByte
32/40kByte
16DI (4DI with 30 kHz)/8DO relay,
230VAC/24VDC/5A, extendable
320,385,439,-
VIPA 115-6BL02
VIPA 115-6BL03
VIPA 115-6BL04
16/24kByte
16(20)DI (4DI with 30 kHz)/16(12)DO 24VDC/0,5A,
24/32kByte
of it 2DO as an impulse output, extendable
32/40kByte
407,472,524,-
VIPA 115-6BL12
VIPA 115-6BL13
VIPA 115-6BL14
16/24kByte
24/32kByte
32/40kByte
16(20)DI (4DI with 30 kHz)/16(12)DO 24VDC/0,5A
of it 2DO as an impulse output,
+ 1x RS232 interface
488,553,606,-
VIPA 115-6BL22
VIPA 115-6BL23
VIPA 115-6BL24
16/24kByte 16(20)DI (4DI with 30kHz)/16(12)DO 24VDC/0,5A
of it 2DO as an impulse output,
24/32kByte 32/40kByte
+ 1x DP-Slave
515,580,634,-
VIPA 115-6BL32
VIPA 115-6BL33
VIPA 115-6BL34
16/24kByte
24/32kByte
32/40kByte
16(20)DI (4DI with 30 kHz)/16(12)DO 24VDC/0,5A
of it 2DO as an impulse output,
+ 1x RS485 interface
488,553,606,-
VIPA 953-0KX10
512MByte
MMC flash card
122,-
CANopen I/O-MODULES
Order No.:
Digital Inputs and
Transistor Outputs
PRICE
in Euro
VIPA 153-4CF00
8DI / A with 2x11 terminals
172,-
VIPA 153-4CH00
8DI, 4DI / A, 4DO, 24VDC / 1A
222,-
VIPA 153-6CH00
8DI, 4DI / A, 4DO, 24VDC / 1A with 4x11 terminals
249,-
VIPA 153-6CL10
24DI, 8DO, 24VDC, 1A
298,-
PROFIBUS INPUT MODULES
PRICE
Digital
Inputs 24 VDC
in Euro
VIPA 151-4PH00
16
204,-
VIPA 151-6PH00
16 with 4x11 terminals
for 3 conductors sensors 233,-
VIPA 151-6PL00
32
303,-
Order No.:
PROFIBUS OUTPUT MODULES
Order No.:
VIPA 152-4PH00
VIPA 152-6PH00
VIPA 152-6PL00
Digital
Outputs
16 transistor, 24 VDC, 1,2A
16 transistor, 24 VDC, 1,2A, 4x11
terminals following 3 conductor sensors
32 transistors, 24 VDC, 1,2A
PRICE
in Euro
239,267,346,-
PROFIBUS I/O-MODULES
Order No.:
VIPA 153-4PF00
VIPA 153-4PH00
VIPA 153-6PH00
VIPA 153-6PL00
VIPA 153-6PL10
Digital Inputs and
Transistor Outputs
8 DI / O with 2x11 terminals
DI 8 x DC 24 VDC
DO 8 x DC 24 VDC, 1A
DI 8 x DC 24 VDC
DO 8 x DC 24 VDC, 1A
4x11 terminals
16 DI, 16 DO, 24 VDC, 1A
24 DI, 8 DO, 24 VDC, 1A
PRICE
Order No.:
VIPA 123-4EH01
VIPA 123-4EJ01
VIPA 123-4EL01
VIPA 123-4EJ11
PRICE
Inputs and Outputs
in Euro
8DI / 8DO, 24VDC/0,5A
16DI / 8DO 24VDC/0,5A
16DI / 16DO 24VDC/0,5A
16DI / 8DO relay, 230VAC/24VDC/5A
16DI 60-230VAC / 8DO relay, 230VAC/24VDC/5A
VIPA 123-4EJ20
in Euro
172,-
MICRO PLC EXTENSIONS
2x12 Bit AI, 2x12 Bit AA/ +/-10V,0-10V,
1-5V,+/-20mA,0-20mA,4-20mA,
1x12 Bit AI Pt100/1000, ni100/1000,
default value can be activated.
VIPA 134-4EE00
222,-
147,227,287,241,323,-
282,-
With the 100V expansion modules the bus connector is included.
249,323,313,-
Order No.:
VIPA 101-4FH50
SHUNTING FIELD
PRICE
to system 100 V
8 x 11 cage clamp terminals in Euro
69,-
25
PLC
GENERAL ACCESSORIES
PROFIBUS / PROFINET Connectors & Cables, S5 Retrofit – PROFIBUS DP slave modules
Features EasyConn and standard connector:
• Visual connection check (cross wiring, position of shield and cable)
• High sturgeon safety and robustness by solid zinc pressure casting
full metal casing
• Cable splicing via comfortable cutting-clamp technology
• Lostsafe one-screw-mounting system
• Integrated terminating resistor
• Integrated PG/diagnosis jack
• 0°, 45°, 90° cable departure
• Additional PG connection with 90° cable departure
Features diagnosis electronic with EasyConn:
• Status display via integrated LEDs for bus-test functions
PWR-LED
tXD-LED
term-LED
ERR-LED
: (on)
: (blinks)
: (off)
(on)
(blinks)
: (off) (blinks)
(on)
power supply 4...5,5V for device OK
device activity on bus terminating resistor deactivated terminating resistor activated terminating resistor defective bus state OK wrong signal level no termination or open Order No.:
PROFIBUS CONNECTORS
PRICE
Technical data
in Euro
Standard PROFIBUS connector, 90°, PG jack,
VIPA 972-0DP01 cutting-clamp technology
34,-
EasyConn PROFIBUS connector, 90°, PG jack, diagnosis electronics, cutting-clamp technology
44,-
VIPA 972-ODP10
EasyConn PROFIBUS connector, 45°, PG jack, diagnosis electronics, cutting-clamp technology
EasyConn PROFIBUS connector, 0°,
VIPA 972-ODP30 diagnosis electronics, cutting-clamp technology
VIPA 972-ODP20
VIPA 972-9DP01
Standard PROFIBUS connector, 90°, PG jack,
cutting-clamp technology, 100 pieces
44,44,on
request
EasyConn PROFIBUS connector, 90°, PG jack,
VIPA 972-9DP10 diagnosis electronics, cutting-clamp technology,
100 pieces
on
request
EasyConn PROFIBUS connector, 45°, PG jack,
VIPA 972-9DP20 diagnosis electronics, cutting-clamp technology,
100 pieces
on
request
EasyConn PROFIBUS connector, 0°,
VIPA 972-9DP30 diagnosis electronics, cutting-clamp technology,
100 pieces
on
request
PROFIBUS CABLES
PRICE
Length
in Euro
VIPA 830-0LC00
100m
133,-
VIPA 830-0LD00
200m
266,-
VIPA 830-0LE00
500m
VIPA 830-0LF00
1.000m
Order No.:
664,1.327,-
PROFIBUS DISMANTLE TOOL
905-6AA00
Order No.:
Dismantle tool (Manufacturer: SIEMEnS)
110,-
PROFINET CABLES
PRICE
Length
in Euro
VIPA 830-0PC00
100m
205,-
VIPA 830-0PD00
200m
399,-
VIPA 830-0PE00
500m
989,-
VIPA 830-0PF00
1.000m
1.905,-
Order No.:
PROFINET CONNECTORS
PRICE
Technical data
in Euro
PROFInEt & EtherCAt plug, 180°, RJ45,
VIPA 972-0PN00 8 wire, insulation displacement connection,
AWG24/1 - 22/1; AWG26/7 - 22/7, 1 piece
19,-
PROFInEt & EtherCAt plug, 180°, RJ45,
VIPA 972-8PN00 8 wire, insulation displacement connection,
AWG24/1 - 22/1; AWG26/7 - 22/7, 1 pieces
180,-
Order No.:
S5®-PROFIBUS SLAVE ADAPTOR
PRICE
Name
in Euro
VIPA 306-1LE00
IM 306 DP-Slave - 115U ZG/EG IM*, power supply 24VDC inclusive
1.061,-
VIPA 306-1UZ00
IM 306 DP-Slave - 135U/155U ZG CPU
1.061,-
VIPA 306-1UE00
IM 306 DP-Slave - 135U/155U ZG/EG IM, power supply 24VDC inclusive
1.061,-
* Adaptation capsules 6ES5 491-0LB11 for application in AG-115U racks necessary.
26
PLC
GENERAL ACCESSORIES
PROFIBUS Repeater, ETHERNET & PROFINET Switches
PROFIBUS DP-REPEATER
The ProfiHub B5 PROFIBUS-DP repeater in a IP20 casing for
industrial automation, to implement long multi-device spur lines
and backbone structures with star/tree segments for PROFIBUS-DP.
It has the functionality of 5 galvanic isolated transparent repeaters.
This allows network structures with extended spur lines that can
handle a maximum of 31 devices individually and a length equal
to the main bus. The ProfiHub B5 refreshes a received message
on one channel and transfers it to all the other channels. The
advanced 12Mbps core of the repeater B1 is identical to the
ProfiHub. It can be cascaded unlimitedly and is equipped with
an isolated RS485 interface. The data is constantly monitored
for glitches which are digitally filtered out. Every channel has
on-board switchable termination and can drive 31 devices.
PROFIBUS REPEATER
PRICE
Technical Data
in Euro
Order No.:
VIPA 920-1CB50
ProfiHub B5, 5 galvanic isolated channels (repeater segments), 31 devices per channel,
transparent for all PROFIBUS DP protocols (DP-V0, DP-V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrive a.s.o.), transmission speed 9.6kbps to 12Mbps (including 45.45kbps),
PROFIBUS address not required, integrated termination facilities (switches), operating temperature -20 to +75°C, dimensions: 167 x 111 x 32mm, supply: 10-30 VDC, 130mA, isolation class IP 20
1.300,-
VIPA 920-1BB10
PROFIBUS Repeater B1, 1 repeater segment, 31 devices per channel, transparent for all
PROFIBUS DP protocols (DP-V0, DP-V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrive
a.s.o.), transmission speed 9.6kbps to 12Mbps (including 45.45kbps), PROFIBUS address
not required, integrated termination facilities (switches), operating temperature -20 to +60°C, dimensions: 106 x 55 x 33mm, supply: 19-28 VDC, 65mA, isolation class IP 20
360,-
UNMANAGED ETHERNET-SWITCHES
The industrial switches EN5-R (5-Port) and EN8-R are entry-level models which support the IEE
802.3 or 802.3x/u with 10/100M full / half duplex and MDI/MDIX recognition. They are designed for
operating temperature ranges of -10° up to 60°C and can also be deployed in rough industrial
environments.
ETHERNET SWITCHES
PRICE
Technical Data
in Euro
Order No.:
VIPA 910-1EN50
Industrial-Switch En5-R, 5x RJ45 10/100BasetX full / half Duplex,
supports IEEE 802.3 and IEEE 802.3u/x and automatic MDI/MDI-X recognition,
redundant power supply for 12-45 VDC,
IP30 aluminium housing for DIn rail mounting
110,-
VIPA 910-1EN80
Industrial-Switch En8-R, 8x RJ45 10/100BasetX full / half Duplex,
supports IEEE 802.3 and IEEE 802.3u/x and automatic MDI/MDI-X recognition,
redundant power supply for 12-45 VDC,
IP30 aluminium housing for DIn rail mountin
145,-
MANAGED ETHERNET-SWITCHES
The Ethernet switches PN5-RD (5-Port) and PN8-RD (8-Port) are Managed Ethernet switches with
integrated PROFINET functions. This makes it easier to integrate the PN switches into PROFINET
oriented engineering systems and also support a variety of useful management functions such as
IGMP Snooping, IEE802.1Q VLAN, Qos, Port mirroring, SNMP, bandwidth management and warning
by e-mail or relay output.
Order No.:
PROFINET SWITCHES
PRICE
Technical Data
in Euro
VIPA 911-2PN50
Industrial-Switch Pn5-RD, PROFInEt v2 Conformance Class B,
Profinet diagnosis via GSD integration, Management functions such as IGMP Snooping, IEEE 802.1Q VLAn, QoS, RMOn, SnMP, Port mirroring, PROFInEt I/O parameters, I/O cyclic data, DCP, DHCP, turbo Ring and turbo Chain (recovery time < 20 ms)
360,-
VIPA 911-2PN80
Industrial-Switch Pn8-RD, PROFInEt v2 Conformance Class B,
Profinet diagnosis via GSD integration, Management functions such as IGMP Snooping, IEEE 802.1Q VLAn, QoS, RMOn, SnMP, Port mirroring, PROFInEt I/O parameters, I/O cyclic data, DCP, DHCP, turbo Ring and turbo Chain (recovery time < 20 ms)
545,-
27
PLC
TELESERVICE
Industrial LAN/Modem-Router
As demonstrated by numerous studies, up to 70% of the maintenance costs can
be saved by preventative maintenance. A useful tool for this is the teleservice that
enables a continuous monitoring and maintenance of the systems. For this reason,
with the VIPA teleservice modules we offer a modern and intelligent kind of teleservice for the different types of transmission. VIPA also has the complete product
range of teleservice modules with WAN, WIFI, 3G connection.
The communication to your automatization modules are established via USB or
via the Ethernet interface, which belongs to each of our devices as standard. The
configuration of the VIPA teleservice modules is performed via a web browser.
VIPA 900-2C510
Order No.:
Additional software is not required. In addition to the robust hardware, which
shines with the usual VIPA interface variety, VIPA also offers a free service called
Talk2M. Via this service you are able to establish a safe connection to your
construction within seconds, regardless of whether they are communicating via
mobile phone or a landline.
Teleservice of controllers, HMIs, frequency converters, roboters, IPCs etc. are not
an impossible challenge for us. With the VIPA Teleservice modules, you have a
perfectly balanced combination of hardware and software.
TELESERVICE MODULES
PRICE
Technical data
in Euro
VIPA 900-2C510
tM-C VPn Router WAn/LAn
4x RJ45 LAn 100 Mbit/s (configurable LAn/WAn), 2x digital input for internet release, 1x digital output for display talk2M, integrated web interface for configuration, OpenVPn for save internet connection with talk2M
high level protection through access control
442,-
VIPA 900-2C520
tM-C VPn Router WIFI/WAn/LAn, WIFI interface for connection to a WIFI network,
4x RJ45 LAn 100 Mbit/s (configurable LAn/WAn)
2x digital input for internet release, 1x digital output for display talk2M
integrated web interface for configuration
OpenVPn for save internet connection with talk2M
high level protection through access control
514,-
VIPA 900-2C580
tM-C VPn Router 3G+/WAn/LAn, 3G+ modem for external broadband communication
4x RJ45 LAn 100 Mbit/s (configurable LAn/WAn),
2x digital input for internet release, 1x digital output for display talk2M,
integrated web interface for configuration,
OpenVPn for save internet connection with talk2M,
high level protection through access control
566,-
OPTIONS
VIPA 900-2C580
VIPA 900-2C520
VIPA 900-0AQ51
tM antenna GSM/GPRS
Talk2M is an internet service portal, specially designed for the growing demands for secure broadband and
mobile access to machinery and equipment.
28
67,-
VISUALIZATION
OPERATOR SYSTEMS
TD/OP-Textpanels
VIPA TEXT DISPLAY
The TD03 is a small, compact text display for showing
messages about current working conditions, for changing
process parametres and setting flags with the built-in buttons.
An S7®-MPI port can be used to connect it to all Siemens
S7-300/400® PLCs and VIPA series 100/200/300V PLC´s.
The configuration is done with the VIPA TD-Wizard. The
generated parameters and data blocks are directly loaded
in the PLC. The TD itself contains no project data.
VIPA 603-1TD00
€ 175,-
tD03-text display , 2x20 sign, LCD, 4 F-buttons + Shift, Up/Down
Arrow keys, ESC, EntER, text memory in PLC (data block), Project
development by tD-Wizard. Interface: MPI.
Suitable for VIPA 100/200/300V and Siemens S7-300 / 400.
Dimensions: 172 x 88 x 32mm, cut-out: 154 x 78mm, Weight: 750g,
mounting: in the device integrated, captive rocker arms.
Supply: 18-32VDC/120 mA. Including MPI connection cable to the
PLC VIPA 950-0KB50, Length 2.5 m with PG and diagnosis jack.
VIPA OPERATOR PANEL
The operator panel OP03 can be programmed by ProTool SW
or OP Manager. It serves for the comfortable display and
update of process values and the output of messages. An
S7®-MPI port can be used to connect it to all Siemens S7300/400® PLCs and VIPA series 100/200/300V PLC´s.
Up to 7 OPs are connectable at the same time to a PLC.
As a specific feature the STEP®7 functions StatVAR and
SteuVAR are implemented. For project transmission, the VIPA
Greencable 950-0KB00 is used.
VIPA 603-1OP00
PROJECT DEVELOPMENT
The project development for the
TD03 is done with TD-Wizard, that
generates one DB, which holds the
suitable data after the registration
of the TD03 through an SFC.
€ 264,-
tD03-text display OP03, 2x20 chars, LCD, 4 F-buttons, numeric
Block, ±, arrow keys, ESC, EntER. Project memory: 256kByte project
programming via Protool by Siemens, interface: MPI
Suitable for VIPA 100/200/300V, Siemens S7-300/400.
Dimensions: 172 x 88 x 32mm, cut-out: 154 x 78mm, Weight: 750g,
mounting: in the device integrated, captive rocker arms.
Supply: 18-32VDC/120 mA.
Including MPI connection cable to the PLC VIPA 950-0KB50,
Length 2.5 m with PG and diagnosis jack.
PROJECT DEVELOPMENT
The project development of the
OP03 can be done with the OP
manager of VIPA. Here, even
complicated navigations can be
realized. The OPManager has an
integrated emulator which helps
you to check all functions without
additional HW on an emulated panel.
The transfer of the project can be
done with MPI. It is also possible to
use Protool by Siemens.
VIPA SW300 O1LA
OP-MANAGER
€ 309,Programming-Tool for OP03
VIPA COMMANDER COMPACT
VIPA CommanderCompact CC03 is an operator control panel
with a text display with 2x20 marks and an integrated PLC
CPU, programmable with WinPLC7 by VIPA or with STEP®7
by Siemens. The CPU of the CC03 disposes more than 16 KB
of program memory and 24 KB of loading memory.
In addition, 16 digital inputs and outputs are on board.
The CC03 can be extended with up to four 100V/200V
modules. The programming can be done via Green Cable
from VIPA or via standard MPI communication with MPI
interface. The alignment on high accessibility, functionality
and easy project development allows the various applications with the CC03.
VIPA 603-1CC21
€ 635,-
OP03-text display OP03, 2x20 chars, LCD, 4 F-buttons, numeric
block, ±, arrow keys, ESC, EntER. Project memory: 128kByte project
programming via Protool by Siemens, interface: MPI. With integrated StEP®7/S7-300 CPU, 16 KB RAM / 24 KB loading memory,
16 digital inputs/16 digital outputs (24VDC/1A).
Dimensions: 172 x 88 x 32mm, cut-out: 154 x 78mm. Weight: 750g,
mounting: in the device integrated, captive rocker arms.
Supply: 18-32VDC/120 mA.
Including MPI connection cable to the PLC VIPA 950-0KB50,
Length 2.5 m with PG and diagnosis jack.. VIPA 603-2CC21
DIMEnSIOnS tD03/OP03
Cut-out:
156 x 78mm
Outside:
173 x 88mm
Deepness:
32mm
€ 741,-
... in addition, with DP-Slave connection.
VIPA 660-0KB00
€ 70,-
Peripheral-extension cable CC03 for up to 4 expansion modules
EM123 or system 200V. Length: 0.5 m.
30
VIPA 950-0KB00
€ 59,-
VIPA “Green Cable“ programming cable for
tD/OP03 and PG/AG download cable for
VIPA 100/200/300V.
VISUALIZATION
OPERATOR SYSTEMS
Touch Panels Computer – Professional Panels
Extremely powerful Touch Panels offer unique features and a very high scalability.
Additionally you have the choice whether you want a panel with or without runtime.
The VIPA Touch Panel family is suited for all applications in the factory, processes and
building automation. The VIPA Touch Panels are particularly mechanically robust due
to the aluminum die-cast housing. With the front-side IP65 protection, these devices
also survive in harsh industrial environments.
•
•
•
•
•
•
Particularly small mounting depth of only 37 to 45mm
Horizontally and vertically deployable
Operating- and configuration-friendly
Extremely robust aluminium housing
Easy mounting through patented mounting bracket
Powerful XScale processor with 800 MHz
The portfolio ranges from 5.7" TFT up to 12.1" TFT color display, and the panels can
be opened either horizontally or vertically. This compact design and functionality
allows VIPA Touch Panels to be used in confined spaces.
Compact Flash
TP 605C
Power ‘
Ethernet 10/100 ‘
USB-A ‘
USB B ‘
MPI, PROFIBUS
‘
RS 485 o. CAn
RS 232 ‘
RS 422 ‘
SD / MMC
TP 606C
TP 608C
TP 610C
TP 612C
Display size
5,7
6,5
8,4
10,4
12,1
Resolution
640x480
640x480
800x600
800x600
800x600
touch screen
resistive
resistive
resistive
resistive
resistive
Processor
XScale 800MHz
XScale 1,1GHz
XScale 1,1GHz
XScale 1,1GHz
XScale 1,1GHz
Interfaces
1x RS232
1x RS422/485
1x USB-A
1x USB-B
1x Ethernet
1x MPI/PROFIBUS-DP
1x RS232
1x RS422/485
1x USB-A
1x USB-B
1x Ethernet
1x MPI/PROFIBUS-DP
1x RS232
1x RS422/485
1x USB-A
1x USB-B
2x Ethernet (Switch)
1x MPI/PROFIBUS-DP
1x RS232
1x RS422/485
2x USB-A
1x USB-B
2x Ethernet (Switch)
1x MPI/PROFIBUS-DP
1x RS232
1x RS422/485
2x USB-A
1x USB-B
2x Ethernet (Switch)
1x MPI/PROFIBUS-DP
128 MB
256 MB
256 MB
256 MB
256 MB
Work memory
User memory
Cardslot for
Housing
2 GB
512 MB
512 MB
512 MB
512 MB
CF + SD/MMC
CF + SD/MMC
CF + SD/MMC
CF + SD/MMC
CF + SD/MMC
Die-cast aluminium
Die-cast aluminium
Die-cast aluminium
Die-cast aluminium
Die-cast aluminium
Dimensions WxHxD
212 x 156 x 44,5mm
212 x 156 x 44,5mm
264 x 189 x 50,5mm
304 x 233 x 52,5mm
325 x 263 x 52,5mm
Integrated cut-out
200 x 144mm
200 x 144mm
250 x 175mm
287 x 217mm
311 x 249 mm
Operating System
Windows
Embedded
CE 6.0 Prof.
Windows
Embedded
CE 6.0 Prof.
Windows
Embedded
CE 6.0 Prof.
Windows
Embedded
CE 6.0 Prof.
Windows
Embedded
CE 6.0 Prof.
Movicon 11 CE
Standard
Movicon 11 CE
Standard
Movicon 11 CE
Standard
Movicon 11 CE
Standard
Movicon 11 CE
Standard
Runtime
31
VISUALIZATION
OPERATOR SYSTEMS
Touch Panels Computer – ECO Panels
•
•
•
•
•
ECO Panels – the solid Touch Panels, are not afraid of any common type of operation.
The Movicon Runtime is already preinstalled for you. So you are ready to go. The
ecoPanel series are not only distinguished by un compromising reliability and
performance, but impressive by an unsurpassed price-performance ratio. Of
course, we also paid attention to durability and quality of the products. This is
achieved amongst others by a special construction, which enables a fanless and
disc free operation.
Five interfaces: see Table
Mounting depth 50 up to 60 mm
Industrial-grade and robust housing
Multilingual language support
Available for remote access
SD / MMC
Ethernet 10/100
RS 232
USB-A
Power
RS 232/42/485
eco
TP 607LC
TP 610LC
TP 615LC
Display size
4,3
7
10
15
Resolution
480x272
800x480
1024x768
1024x768
touch screen
resistive
resistive
resistive
resistive
Processor
Cortex-A8 CPU 1000MHz
Cortex-A8 CPU 1000MHz
Cortex-A8 CPU 1000MHz
Cortex-A8 CPU 1000MHz
Interfaces
1x RS232
1x RS232/422/485
1x USB-A
1x Ethernet
1x MPI/PROFIBUS-DP (option)
1x RS232
1x RS232/422/485
1x USB-A
1x Ethernet
1x MPI/PROFIBUS-DP (option)
1x RS232 (SUB-D)
1x RS232/422/485 (DB25)
1x USB-A
2x Ethernet
1x MPI/PROFIBUS-DP (option)
1x RS232 (SUB-D)
1x RS232/422/485 (DB25)
2x USB-A
2x Ethernet
1x MPI/PROFIBUS-DP (option)
Work memory
256 MB
256 MB
256 MB
256 MB
User memory
128 MB
128 MB
128 MB
128 MB
Cardslot for
SD
SD
SD
SD
plastic
plastic
aluminium / steel
aluminium / steel
Dimensions WxHxD
140 x 116 x 57mm
212 x 156 x 57mm
325 x 263 x 56mm
400 x 310 x 56mm
Integrated cut-out
123 x 99mm
198 x 142mm
311 x 249mm
368 x 290mm
Operating System
Windows
Embedded
CE 6.0 Core
Windows
Embedded
CE 6.0 Core
Windows
Embedded
CE 6.0 Core
Windows
Embedded
CE 6.0 Core
Movicon 11 CE Standard
Movicon 11 CE Standard
Movicon 11 CE Standard
Movicon 11 CE Standard
Housing
Runtime
eco+
Processor
Work memory
Operating System
Runtime
32
TP 604LC
TP 604LC+
Cortex-A8 CPU 1000MHz
TP 607LC+
Cortex-A8 CPU 1000MHz
TP 610LC+
Cortex-A8 CPU 1000MHz
TP 615LC+
Cortex-A8 CPU 1000MHz
256 MB
256 MB
256 MB
256 MB
Windows
Embedded
CE 6.0 Core
Windows
Embedded
CE 6.0 Core
Windows
Embedded
CE 6.0 Core
Windows
Embedded
CE 6.0 Core
Movicon 11 CE Standard
Movicon 11 CE Standard
Movicon 11 CE Standard
Movicon 11 CE Standard
VISUALIZATION
OPERATOR SYSTEMS
Multitouch Panels Computer – Multitouch Panel PC
Panel PCs – Intelligent control and monitoring –
with PC performance in the control cabinet.
The combination of an industrial PC with state of the art performance features and a Touch Panel with ideal display capabilities,
enables the user to concentrate high performance into the
smallest space. The latest Intel Atom processor technology,
large integrated work memory, and display resolutions of up to
Full HD with the 21.5” panel PC are state of the art.
The panels also have numerous useful interfaces just like
other VIPA Touch Panels. The pre-installed operating systems
Windows Embedded Compact 7 or Windows Embedded
Standard 7 are state of the art in the PC world.
Multi Touch
Display size
Display resolution
touch Screen
3,5mm Audio out
2x RJ45 Jack
4x USB-A interface
2x RS232/RS422/RS485 Reset button
VGA interface
Latest Intel Atom process technology
High display resolution with up to Full HD with 21.5“ Panel
Numerous interfaces for adequate PC operation
Runtime Movicon 11 Win Standard optionally preinstalled
Optional customer programs also usable
Cooling without a fan
High-quality metal case
voltage supply
DC 12-30V
•
•
•
•
•
•
•
PPC010
PPC015
PPC021
10,1“ (16:10)
15,6” wide (16:9)
21,5” wide (16:9)
1280 x 800
1366 x 768
1920 x 1080
PCAP
PCAP
PCAP
Processor
Intel Atom D2550
dualcore @1,86 GHz
Intel Atom D2550
dualcore @1,86 GHz
Intel Atom D2550
dualcore @1,86 GHz
Interfaces
2x Ethernet (10/100/1000)
4x USB2.0
2x serial (RS232, RS422/RS485)
Audio out
2x Ethernet (10/100/1000)
4x USB2.0
2x serial (RS232, RS422/RS485)
Audio out
2x Ethernet (10/100/1000)
4x USB2.0
2x serial (RS232, RS422/RS485)
1x MPI/PROFIBUS-DP (option)
Work Memory
2 GB
2 GB
2 GB
User Memory
2 GB with WEC7/16 GB with WES7
2 GB with WEC7/16 GB with WES7
2 GB with WEC7/16 GB with WES7
Card slot
Casing
Dimensions backside WxHxD
CFast
CFast
CFast
aluminium / steel
aluminium / steel
aluminium / steel
292 x 207 x 54,2mm
417,8 x 312,8 x 63,8mm
562,4 x 382,4 x 60,9mm
Integrated cut-out
297 x 212mm
401 x 296mm
547 x 367mm
Operating System
Windows Embedded Compact 7
or
Windows Embedded Standard 7
Windows Embedded Compact 7
or
Windows Embedded Standard 7
Windows Embedded Compact 7
or
Windows Embedded Standard 7
Movicon 11 CE Standard or
Movicon11 Win Standard (32 IO-Bytes)
Movicon 11 CE Standard or
Movicon11 Win Standard (32 IO-Bytes)
Movicon 11 CE Standard or
Movicon11 Win Standard (32 IO-Bytes)
0°C bis 50°C
0°C bis 50°C
0°C bis 50°C
Runtime
Ambient temperature
33
VISUALIZATION
OPERATOR SYSTEMS
Touch Panel Computer – Professional Panels, eco-Panels and Multitouch Panel PC
Order No.:
PRICE
Technical data
in Euro
62F-FEEO-CX
5,7“, tFt, 320 x 240 pix, housing: Die-cast aluminium
Dimensions: 212 x 156 x 44,5mm, Cut-out: 200 x 144mm
1.219,-
62G-FEEO-CX
6,5“, tFt, 640 x 480 pix, housing: Die-cast aluminium
Dimensions: 212 x 156 x 44,5mm, Cut-out: 200 x 144mm
1.670,-
62I-IEEO-CX
8,4“, tFt, 800 x 600 pix, housing: Die-cast aluminium
Dimensions: 264 x 189 x 50,5mm, Cut-out: 250 x 175mm
1.794,-
62K-JEEO-CX
10,4“, tFt, 800 x 600 pix, housing: Die-cast aluminium
Dimensions: 304 x 233 x 52,5mm, Cut-out: 287 x 217mm
1.905,-
62M-JEEO-CX
12,1“, tFt, 800 x 600 pix, housing: Die-cast aluminium
Dimensions: 325 x 263 x 52,5mm, Cut-out: 311 x 249mm
2.112,-
Order No.:
OPTIONS
PRICE
in Euro
VIPA ZRT6-TP
Extra charge for Zenon runtime, Vers. 6.51 256 tags
574-2AH00
Compact Flash (CF-Card) 1 GB
90,-
574-2AI00
Compact Flash (CF-Card) 2 GB
107,-
953-1SI00
Secure Disc (SD-Card) 2 GB
Order No.:
200,-
93,-
ECO PANELS
PRICE
Technical data
in Euro
62E-MGCO-CB
4,3“, tFt, 480 x 272 pix, housing: plastic
Dimensions: 140 x 116 x 57mm, Cut-out: 123 x 99mm
505,-
62H-MGCO-CB
7“, tFt, 800 x 480 pix, housing: plastic
Dimensions: 212 x 156 x 57mm, Cut-out: 198 x 142mm
752,-
62K-NHCO-CB
10“, tFt, 1024 x 768 pix, housing: aluminium/steel
Dimensions: 325 x 263 x 56mm, Cut-out: 311 x 249mm
1.432,-
62P-NHCO-CB
15“, tFt, 1024 x 768 pix, housing: aluminium/steel
Dimensions: 400 x 310 x 56mm, Cut-out: 368 x 290mm
1.741,-
Order No.:
OPTIONS
961-0MP0
MPI/PROFIBUS-DP-interface optional
953-1SI00
Secure Disc (SD-Card) 2 GB
Order No.:
PRICE
in Euro
133,93,-
PANEL PCS
PRICE
Technical data
in Euro
67K-PNL0-JX
10,1“, 1280 x 800 pix, housing: aluminium/steel
Dimensions: 292 x 207 x 54,2mm, Cut-out: 297 x 212mm
1.849,-
67P-PNLO-JX
15,6“, 1366 x 768 pix, housing: aluminium/steel
Dimensions: 417,8 x 312,8 x 63,8mm, Cut-out: 401 x 296mm
2.364,-
67S-PNLO-JX
21,5“, 1920 x 1080 pix, housing: aluminium/steel
Dimensions: 562,4 x 382,4 x 60,9mm, Cut-out: 547 x 367mm
2.879,-
Order No.:
ZOP7-RT-256
34
PROFESSIONAL PANELS
OPTIONS
Extra charge for Zenon runtime Vers. 7.11 256 tags
PRICE
in Euro
350,-
COMMUNICATION
PROTOCOL CONVERTERS
Ethernet/Fieldbus, Ethernet/MPI, Serial/Fieldbus
The netTAP gateway family simply and efficiently
merges two protocols into each other. Whether it’s
a simple serial bus, a classic Fieldbus or one of the
many Real-Time-Ethernet protocols, netTAP provides
a common platform for a transparent conversion of
any protocol of industrial automation. For plants
recently upgraded using Fieldbus or modernized
with Real-Time-Ethernet, netTAP enables the use of
existing and proven field devices still by simply
interfacing between the new and old technology.
The modular device design combines the two network
interfaces in a DIN-rail mountable housing. NetTAP
is configured and diagnosed by a universal FDT/DTM
based configuration tool suite.
LED indicators are visualizing status information
for rapid on-site diagnostics. The protocol-conversion
are pre-programmed and loaded as firmware onto
the device on demand. Because of the same physical
network interface all Real-Time-Ethernet protocols
can be managed by one single device variant.
Power Supply: 18-30V/130 mA @ 24V
Operating temperature: 0 ... 60 °C Size: (L x W x H) 100 x 52 x 70mm (without connector)
Power Supply: 18-30V/130 mA @ 24V
Operating temperature: 0 ... 60 °C Size: (L x W x H) 100 x 25 x 70mm (without connector)
Controller
Controller
Zahlen
aktualisieren
network configuration and diagnostics
I/O-Device
I/O-Device
netSCRIPt-editor and
debugger for nettAP 100
Order No.:
PROTOCOL CONVERTER
PRICE
Data
in Euro
NT 50-RS-EN
nettAP50 Gateway RS232/422/485 - Ethernet 187,-
NT 50-CO-RS
nettAP50 Gateway CAnopen - RS232/422/485
187,-
NT 50-CO-EN
nettAP50 Gateway CAnopen - Ethernet 187,-
NT 50-DN-RS
nettAP50 Gateway Devicenet - RS232/422/485
187,-
NT 50-DN-EN
nettAP50 Gateway Devicenet - Ethernet 187,-
NT 50-DP-RS
nettAP50 Gateway PROFIBUS-DP - RS232/422/485
187,-
NT 50-DP-EN
nettAP50 Gateway PROFIBUS-DP - Ethernet 187,-
NT 100-RS-xx
Order No.:
nettAP100 Gateway serial RS232/422/485 - fieldbus
on request
PROTOCOL CONVERTER
PRICE
Data
in Euro
NT 100-RE-CO
nettAP100 Gateway Rt-Ethernet - CAnopen
495,-
NT 100-RE-DN
nettAP100 Gateway Rt-Ethernet - Devicenet
495,-
NT 100-RE-DP
nettAP100 Gateway Rt-Ethernet - PROFIBUS-DP
495,-
NT 100-CO-DN
nettAP100 Gateway CAnopen - Devicenet
495,-
NT 100-CO-DP
nettAP100 Gateway CAnopen - PROFIBUS-DP
495,-
NT 100-DN-CO
nettAP100 Gateway Devicenet - CAnopen
495,-
NT 100-DN-DP
nettAP100 Gateway Devicenet - PROFIBUS-DP
495,-
NT 100-DP-CO
nettAP100 Gateway PROFIBUS-DP - CAnopen
495,-
NT 100-DP-DN
nettAP100 Gateway PROFIBUS-DP - Devicenet
495,-
NT 100-DP-DP
nettAP100 Gateway PROFIBUS-DP - PROFIBUS-DP
495,-
NT100-xx-xx/ML
nXLIC netX-Master Licence für Rt-Ethernet, PROFIBUS-DP, CAnopen, Devicenet
NETTAP 50 – THE LOW-COST GATEWAY
netTAP 50 is a protocol converter for simple conversions. It supports conversions of
1-port Real-Time-Ethernet to Fieldbus to serial automation protocols and realizes slave
to slave and slave to master combinations. As a master netTAP 50 provides full master
functionality to a single slave. This enables an effortless integration of a single field
device into the superordinated network.
Highlights
• Cost optimized, compact design • 1-port-Real-time-Ethernet to Fieldbus, serial RS232/422/485 to Fieldbus or 1-port Real-time-Ethernet • Ethernet service port • Integrated FDt/DtM based configuration tool
• Suitable for OEMs or reseller • Slave to Slave, Slave to Master conversions
NETTAP 100 – GATEWAY WITHOUT LIMITS
netTAP 100 is the protocol converter for sophisticated conversions and manages next
to serial to Fieldbus to 2-port Real-Time-Ethernet also Fieldbus to Fieldbus conversions.
It supports slave and master functionality in any combination. There is no restriction on
the master functionality. There is a memory card slot integrated, allowing the user to
save the firmware and configuration data on a removable card.
Highlights
• Fieldbus to Fieldbus conversion • 2-port-Real-time-Ethernet to Fieldbus conversion
• RS232/422/485 to Fieldbus or 2-port-Real-time-Ethernet conversion
• Master and Slave functionality in any combination • Own serial protocols with netSCRIPt language
• Memory card option for saving firmware and configuration • One single configuration tool • USB service port
+150,-
35
COMMUNICATION
GATEWAYS
NETLINK MPI
NETLINK PROXY
the netLInK has a housing shape that fits in the PG sockets of the Siemens S7-300 and
S7-400 controls. Ethernet: 10/100MBd with 16 connections. MPI/PROFIBUS-DP (up to 12MBd),
DB9-connector, up to 32 MPI-connections. Protocol: IBH-Link for StEP®7 and RFC 1006.
Power supply: 24VDC or via PG socket. Suitable for the use with StEP®7 of SIEMEnS.
netLInK PROXY integrates any PROFIBUS-DP slave in a superordinated PROFInEt network. As a connector the device is plugged directly on to the PROFIBUS-DP interface
of the DP-Slave and connects to the PROFInEt network via the RJ45 socket. On
PROFInEt side netLInK behaves like an ordinary I/O device. the DP-Slave’s process
data is mapped in accordance with the present PI-organisation’s guideline into the
PROFInEt slot/subslot addressing model. Commissioning is done via the PROFInEt.
Highlights
• Parallel MPI communication to 32 controls via 16 tCP/IP connections
• RFC 1006 protocol for connection of visualizing systems
• Ethernet connection with auto crossover and autonegotiation
• Power supply through the PLC MPI-port or alternatively via external 24V • RJ45 Port with status LEDs • Autobaudrate detection • Additional PG socket
Highlights
• Integrates a single DP-Slave into PROFInEt network • For direct mounting on DP interface • Compatible to any PROFIBUS node
• Automatic GSDML file generation from GSD file for PROFInEt import • Works in accordance with PI-organization’s proxy guideline
PROFIBUS Device
Controller
PROFINET Device
NT50-MPI
NL50-MPI
PROFIBUS/MPI
NL51-DPL
Controller
+24 V
MICRO-CONVERTER
PRICE
Description
in Euro
Article
Ethernet
Programming Tool
+24 V
Visualization
System
NT 50-MPI
Micro-converter Ethernet tCP/IP to S7-MPI/PROFIBUS-DP (up to 12Mbps) in the box of a nettAP50. Supply: 24VDC. For the use with StEP®7 of SIEMEnS.
540,-
NL 50-MPI
Micro-converter Ethernet tCP/IP to S7-MPI/PROFIBUS-DP (up to 12Mbps) in the box of a Profibus-connector. Supply: 24VDC
or via PG-Connector. For the use with StEP® of SIEMEnS.
470,-
NL 51-DPL
Micro converter Profinet to PROFIBUS-DP-Link (up to 12MBd)
in the box of a Profibus-connector. Power supply: 24VDC
175,-
PC FIELDBUS CARDS
PC CARDS IN ALL FORMATS
With the cifX communication interface, the user will have a unified standard for all Real-Time-Ethernetand Fieldbus systems on different hardware platforms. The complete protocol stack will be exectued on the
PC card and data exchange to the host will be done via Dual-Port-Memory or DMA. Hilscher offers the cifX
PC communication cards with PCI or PCI Express, Mini
PCI or Mini PCI Express, PCI-104, PC/104 or Compact
PCI interface. With a rotary switch an easy and reliable slot assignemt can be done for the PCI types. A
complete software package including a single
FDT/DTM based configuration tool for all products and
networks, documentation, loadable firmware and
driver tool-kit is always in the scope of delivery. Due
to the own network controller netX a 10-years delivery is guaranteed.
• For all major network protocols
• Available in all common PC card formats
• Single hardware for all Real-time-Ethernet protocols
• Minimum logistic and administrative effort trough least product variety
• Comprehensive accessories (OPC server & driver for different OS) • Same software host interface for all protocols • Quick & Easy change of protocol by loadable firmware
36
COMMUNICATION
FIELDBUS CARDS
PC Fieldbus Cards
TECHNICAL
DATA
Article
System Interface
Operating Voltage Operating
Temperature
CIFX 50-XX
PCI, 33 MHz DPM, IO-DMA
3,3 V / typ. 650 mA -20 ... +55°C
120 x 86 x 18,5mm
CIFX 50E-XX CIFX 104-XX CIFX 104C-XX PCI Express, One-Lane Port PC/104, 33 MHz DPM PCI 104, 33 MHz DPM
3,3 V / typ. 800 mA
3,3 V / typ. 650 mA 3,3 V / typ. 650 mA 0 ... +55°C -20 ... +70°C -20 ... +70°C
120 x 73,2 x 18,5mm
97 x 91 x 24mm
97 x 91 x 24mm
PROFIBUS
Slave
Master
Slave max.
Cyclic Data max. DPV1 Class 1, 2 Configuration Data
Appl. specific Parameter
488 Bytes
yes 244 Bytes
237 Bytes
125
7168, 255 Bytes
yes
244 Bytes/Slave
237 Bytes/Slave
AS-Interface
Master
Slaves max. Cyclic Data max.
Article
CIFX 50 RE
PRICE
Description
in Euro
PCI Communication Interface netX for Real-time-Ethernet - 2x RJ45
PROFINET
248,-
CIFX 50E-RE
PCI Express Communication Interface netX for Real-time-Ethernet - 2x RJ45
298,-
IO Devices max. Cyclic Data max.
Acyclic Data CIFX 90-RE/F
PC-Card Mini PCI for Real-time-Ethernet - 2x RJ45
347,-
Functions CIFX 104-RE
PC/104(ISA) Communication Interface netX for Real-time-Ethernet - 2x RJ45
318,-
CIFX 104C-RE
PCI-104(PCI) Communication Interface netX for Real-time-Ethernet - 2x RJ45
318,-
CIFX xxx-xx/ML
nXLIC netX-Master Licence for Ethernet/IP / EtherCAt / PROFInEt / SERCOS III
+150,-
The configuration software SYCON.NET is
included in the delivery with all CIFX-Interfaces!
Article
Digital Analog
Ayclic Data
Functions
Version
CIFX REALTIMEETHERNET UNITS
CIFX FELDBUS UNITS
PRICE
Description
in Euro
CIFX 50-DP
PCI Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol. 298,-
CIFX 50-CO
PCI Interface netX for CAnopen/Slave - SubD Stecker 9-pol.
298,-
CIFX 50-DN
PCI Interface netX for Devicenet/Slave - COMBICOn 5-pol.
298,-
CIFX 50-2ASM
PCI Interface netX for 2x AS-Interface Master - 2x COMBICOn 2-pol.
586,-
Dimensions (L x H x W)
topologydetection 62
62 Byte (4Bit/Byte) 31 Slaves x 4x16Bit
220 Bytes/Request
transactionstypes 1-5, Profil for ext. Master: M4 3.0
IO Device
2048 Bytes (IOCR)
Read/Write Record, max 1024 Bytes/telegram
Alarmtreatment, DCP Class 1&2 (unsynchronisiert) Class 3 (synchronised) Context Management by CLRPC
Diagnostic, max. 200 Bytes/telegram target-actual comparison configuration
for max. 244 Module, 1 Submodul
LLDP, SnMP V1, MIB 2, Physik. Device
Controller
128
11472 Bytes
Read/Write Record, max. 4096
Bytes/Request
minimum cycle time1 ms Alarmtreatment DCP Context Management throug CLRPC
per Device one buffer for diagnostic
data available Powerlink
Controlled Node/Slave
Cyclic Data Acyclic Data
Functions max. 2980 Bytes
SDO Up-/Download
SDO via ASnD and UDP, Poll Request/Response Response time 1μs, Version V2
CANopen
Nodes
nodes max.
Cyclic Data max.
SDO Up- a. Download
Emergency Functions
Master
126
7168 Bytes
max. 200Bytes/Request
Consumer/Producer
1024 Bytes
CAn
Producer node-/Life Guard., Heartbeat, PDO Mapping, nMt Magagement, SYnC, Emergency
synchronized, remotely request and event driven (change of state) max. 64 Rx/txPDO
max. 512 Rx/txPDO
11 Bit
11 Bit
347,-
EtherCAT
Slave
Slaves max
Cyclic Data max.
Acyclic Data
200
512 Bytes
SDO Master/Slave
SDO Slave/Slave
COE
Emergency, Complex Slave
3 FMMUs and 4 SYnC-Manager Distributed Clocks
CIFX 50E-DP
PCI Express Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol. 348,-
CIFX 50E-CO
PCI Express Interface netX for CAnopen/Slave - SubD Stecker 9-pol.
348,-
CIFX 50E-DN
PCI Express Interface netX for Devicenet/Slave - COMBICOn 5-pol.
348,-
CIFX 50E-2ASM
PCI Express Interf.netX for 2x AS-Interface Master- 2x COMBICOn 2 pol. 636,-
CIFX 50-2DP
PCI Interface netX for 2x PROFIBUS/Slave - 2x SubD Buchse 9-pol.
423,-
CIFX 90-DP/F
PC-Karte Mini PCI für PROFIBUS DP
CIFX 104-DP
PC/104(ISA) Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.
368,-
CIFX 104-CO
PC/104(ISA) Interface netX for CAnopen/Slave - SubD Stecker 9-pol.
368,-
CIFX 104-DN
PC/104(ISA) Interface netX for Devicenet/Slave - COMBICOn 5-pol. 368,-
CIFX 104C-DP
PCI-104(PCI) Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.
368,-
CIFX 104C-CO
PCI-104(PCI) Interface netX for CAnopen/Slave - SubD Stecker 9-pol.
368,-
CIFX 104C-DN
PCI-104(PCI) Interface netX for Devicenet/Slave - COMBICOn 5-pol.
CIFX xxx-xx/ML
nXLIC netX-Master Licence for PROFIBUS, CAnopen, Devicenet
368,+150,-
PDO Communication
Functions
Master
11520 Bytes
CoE (CAnopen over EtherCAt) Up-/Download, max. 1500 Bytes Get OD List Emergency, topology: Line 37
COMMUNICATION
PROTOCOL CONVERTER / PC-CARDS
Ethernet/Serial, USB/Serial, Accessories
Ethernet-Serial converters allow an easy decentralised construction
of serial connections. Changes of existing software are not necessary.
The provided drivers generate virtual COM ports in every operating
system which behave like real COM interfaces. The serial data stream
will transmit bidirectional and with evey handshake line via TCP/IP in
the standard Ethernet.
Technical data
Serial Device server, 9.6-460kBd, 10/100Mbps Ethernet RJ45, incl. driver CD. Driver Modes: Port COM Mapping, zero modem tunnel, tCP RAW mode,
server/client, UDP. Protocols: tCP/IP, UDP, telnet, DHCP, ICMP, HttP, DnA, SnMP v1/2c/3-rd. Configuration: Driver control panel, web browser, telnet, SnMP.
Order No.:
VS NETCOM Plus 111
VS NETCOM Plus 811
VS NETCOM Plus 813
VS NETCOM Plus 1613
SERIAL DEVICE SERVER
PRICE
Technical data
in Euro
1x RS232 DB9 to tCP/IP
8x RS232 DB9 to tCP/IP
8x RS232/422/485 DB9 to tCP/IP
16x RS232/422/485 DB9 to tCP/IP
USB-SERVERCONVERTER
PRICE
Technical data
in Euro
CONVERTER USB-SERIAL
Order No.:
USB-Serialconverters allow furthermore the use of devices with serial
interface, even if the PC owns none or not enough COM interfaces.
A virtual COM port which can be used by consisting programs without
update is generated by the provided driver. The converters contain
128 bytes FIFOs and can be set to any transfer speeds up to
921.600Bps.
VSCOM USB-COM-mini
VSCOM USB-COM-plus
1x RS232 DB9 integrated in the connector
2.0, 1x RS232/422/485, DB9, metal casing
ZUBEHÖR
37,94,-
DK-NCP
WK-NCP
NETZTEIL
DIn-Rail mounting kit
Wallmount kit
Power adaptor 12 V / 1,5 A
8,8,19,-
SERIAL INTERFACE PC-CARDS
Serial High speed-interface units with 2 or 4 COM ports, 16 or 128 bytes FIFO and in wide
range adjustable transfer speed are the most cost-efficient solution to install further COM
boards in PC systems. The cards fulfill the UPCI specification and can be operated on all
current boards. As a variation, low profile cards with lower dimensions are available.
Order No.:
SERIAL INTERFACE
PRICE
Technical data
in Euro
VSCOM 200E PCIex
2x RS232 DB9, 16C950, 921kBd,
PCI-Express, 128 Byte FIFO
70,-
VSCOM 400E PCIex
4x RS232 DB9, 16C950, 921kBd,
PCI-Express, 128 Byte FIFO
142,-
VSCOM 400H UPCI
4x RS232 DB9, 16C950, 921kBd,
PCI, 128 Byte FIFO
132,-
VSCOM 200I UPCI
4x RS232/422/485 DB9, 16C950, 921kBd,
PCI, 16 Byte FIFO 145,-
Other constructions on request!
38
159,630,690,990,-
TOTAL SYSTEM SOLUTIONS
From the VIPA ecoPanels up to
the high performance VIPA Multi
touch PCs, VIPA has the complete
range of HMIs.
the new intelligence of the hardware configuration, the intuitive user interface and the
system openness make SPEED7 Studio the
powerful and easy-to-use tool.
With the VIPA teleservice-Modules
you have a safe and fail-proof
solution to service equipment.
Vipa Controls increases the productivity of your plants and machinery.
samosPRO is a fast, compact, modular
safety controller for monitoring and controlling mechanical and system engineering applications.
the GA700 has usable functions
to satisfy all requirement – one
can do all.
the SLIO bus terminals are
boundless usable with all
other CPU-manufacturers.
the new Sigma 7 Servo is developed
for high production speed and maximum
of general plant safety.
High quality with phenomenal performance has a name: MOtOMAn robots
39
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising