Morphy Richards | 48953 | Datasheet | Morphy Richards 48953 blender

Morphy Richards 48953 blender
FP48953MUK-Rev1
19/5/06
14:08
Page 1
Blender
Please read and keep these instructions
Getting the best from your new
appliance...
Safety
• The blender blades are very sharp, therefore handle with
care when using and cleaning.
• Do not overfill the blender. Refer to the operating chart for
quantities and operating times.
• Do not use continuously for more than one minute at a time
and allow to cool for 5 minutes before further use.
• Allow hot liquids to cool before blending.
WARNING: Do not add hot liquids to glass jug - Allow to
cool first.
Operation
When using the blender ensure the lid is in place before
switching on and do not remove until the blades have stopped
rotating.
To register for your 5 year guarantee ring the Helpline
numbers below.
Please have the following information available.
Serial number
and model number: 48953 (see
page 8 for guarantee details)
For replacement parts, help with using your Morphy Richards products,
problems and lots more, contact us by phone or through our website.
UK Helpline: 0870 060 2609
Replacement parts: 0870 167 6640
Ireland 1800 409119
www.morphyrichards.com
FP48953MUK-Rev1
19/5/06
14:08
Page 2
CONTENTS
2
Important safety instructions
3
Electrical requirements
3
Features
4
Before use
5
Using the blender
5
Operating chart
6
Cleaning and Storage
6
Dedicated helpline
7
Your guarantee
8
www.morphyrichards.com
FP48953MUK-Rev1
19/5/06
14:08
IMPORTANT
SAFETY
INSTRUCTIONS
Page 3
•
The use of any electrical
appliance requires the
following of basic common
sense safety rules.
Primarily there is danger of
injury or death and secondly
the danger of damage to
the appliance. These are
indicated in the text by the
following two conventions:
Other safety
considerations
•
WARNING: Danger to the
person!
IMPORTANT: Damage to
the appliance!
In addition we offer the
following essential safety
advice.
•
Location
•
•
•
•
•
•
Remove all packaging and
retain for future reference.
Ensure the appliance is
used on a firm, flat surface.
Do not use the appliance
outdoors or in a bathroom.
Do not place the appliance
on a highly polished
wooden surface as damage
may occur to the surface.
Do not place the appliance
on or near a hot surface
such as a hot plate or
radiant rings or near a
naked flame.
Do not let the mains lead
overhang the edge of the
table or work-top, or touch
hot surfaces.
•
•
•
•
•
Children
•
•
Disconnect the appliance
from the mains supply when
not in use, before taking off
attachments and before
cleaning.
IMPORTANT: Allow hot
liquids to cool before
adding to blender,
always ensure the lid is
fitted correctly.
Do not operate any
appliance with a damaged
cord or plug or after the
appliance malfunctions or
has been damaged in any
manner.
The power cord cannot be
replaced. Contact Morphy
Richards for advice.
The use of attachments or
tools not recommended or
sold by Morphy Richards
may cause fire, electric
shock or injury.
Do not use the appliance for
other than its intended use.
Do not blend for longer than
the time periods
recommended in the
operating chart.
When using the blender
ensure the lid is in place
before switching on and do
not remove the lid until the
blade has stopped rotating.
Refer to the operating chart.
ELECTRICAL
REQUIREMENTS
Check that the voltage on
the rating plate of your
appliance corresponds with
your house electricity
supply which must be A.C.
(Alternating Current).
If the socket outlets in your
home are not suitable for
the plug supplied with this
appliance, the plug should
be removed and the
appropriate one fitted.
WARNING: The plug
removed from the mains
lead, if severed, must be
destroyed as a plug with
bared flexible cord is
hazardous if engaged
into a live socket outlet.
Should the fuse in the 13
amp plug require changing,
a 5 amp BS1362 fuse must
be fitted.
WARNING: This
appliance must be
earthed.
Product Specific
Safety
Children do not understand
the dangers associated with
operating electrical
appliances. Never allow
children to use this
appliance.
•
Personal safety
•
Avoid touching moving
parts. Keep hands, hair,
clothing as well as spatulas
and other utensils away
from the blades during
operation, to prevent
personal injury and / or
damage to the appliance.
WARNING: To protect
against risk of electric
shock NEVER immerse
the appliance body in
water or in any other
liquid and always
ensure the electrical
connections are kept
dry.
WARNING: The blades
are very sharp. Handle
with care when using
and cleaning.
Do not overfill the blender.
This could cause damage to
the motor.
The 5 amp fuse will blow if
the blender is overloaded.
Replace the fuse and do not
exceed the maximum
recommended volumes.
www.morphyrichards.com
3
FP48953MUK-Rev1
19/5/06
14:08
Page 4
Features
⁄
·
⁄
¤
‹
›
fi
fl
‡
·
¤
‹
›
‡
fi
fl
4
www.morphyrichards.com
Measuring cap
Lid
Glass jug
Blender base unit
Control switch
Cable storage
Plug holder
Lifting lip (aids lid removal)
FP48953MUK-Rev1
19/5/06
14:08
Page 5
BEFORE USE
Carefully unpack your blender,
as the blades are very sharp.
Remove any stickers (except for
serial label) and wash all the
parts that are safe to immerse
in water.
WARNING: Never immerse
the blender base unit in
water or in any other liquid
and always ensure the
electrical connections are
kept dry.
This may be wiped with a clean,
damp cloth. But only when
unplugged from the electrical
socket.
USING THE
BLENDER
OPERATING THE
BLENDER
1
2
3
4
5
6
7
Use your blender for soups,
sauces, drinks, pates,
mayonnaise, dressings etc.
2
3
4
The measuring cap can be used
to measure small quantities of
liquid.
1
2
The blender control switch has
the following settings. Pulse,
off, speed 1 to speed 4. A
Pour the liquid through the hole
in the lid.
Place the measuring cap back
in the lid, twisting to
lock/unlock. Then proceed with
your blending.
Crushing ice
The speed can be adjusted
whilst the blender is in use.
1
Using the pulse setting allows
greater control over the texture
of the food produced. It is only
intended to be used for short
‘bursts’ of blending.
Ensure the blender base unit is
unplugged from the mains.
Place the blender jug onto the
base unit. Ensure that the jug is
securely in place B.
B
You are able to place the jug in
6 different positions for ease of
use.
Place the food in the blender.
Place the lid onto the blender.
Then put the measuring cap
into position C.
Place the measuring cap into
position by pressing down and
C
turning clockwise, remove by
doing it in reverse.
Plug in the blender and turn the
control switch to either pulse or
speed 1 to speed 4 depending
on the desired consistency.
Always operate the blender with
D
the lid in place.
Never operate the blender with
3
more than 1 litre (1 /4 pints) of
liquid or when empty.
1
Measuring cap
Your blender can also be used
for crushing ice for cocktails,
desserts etc.
OPERATING
CONTROLS
A
2
Follow the procedure for
blending points 1-6, replacing
food with ice cubes to be
crushed.
Plug in the blender and turn the
control switch to pulse position
and hold for several seconds
D.
Note: The maximum capacity
for ice crushing at any one time
is 500ml.
www.morphyrichards.com
5
FP48953MUK-Rev1
19/5/06
14:08
Page 6
Operating Chart
Blending/liquidising
Volume
Speed
Time
Hints
*Soups, purees,
drinks, milkshakes,
batters
1.0 L
1-4+
pulse
15 secs
1 min
Begin with low
speed and increase
to high if required.
500ml
max
pulse
10-20 secs
Crushing ice
Ice
Do not process for longer than recommended time.
Do not exceed recommended maximum volumes.
* Do not blend hot liquids, allow to cool first.
HINTS AND TIPS
Use your blender for soups,
sauces, drinks, pates,
mayonnaise, dressing etc.
blender jug is fitted incorrectly.
•
•
•
Don’t put dry ingredients into
the blender before switching
on. If necessary, cut them into
pieces, remove the filler cap,
then, with the machine running
drop the pieces through one by
one.
Never run the blender with
dry ingredients for longer
than 15 seconds. Allow to
cool for 5 minutes.
•
•
•
When making mayonnaise, put
all the ingredients, except oil,
into the blender. Then with the
machine running, pour the oil
slowly into the blender through
the filler cap hole.
Thick mixture, eg. pates and
dips, may need scrapping out
with a spatula. Ensure the
appliance is switched off
first. If the mixture is difficult to
process add more liquid.
When blending pour the liquids
in first and then add the solid
food. Begin blending at the
lower speed and increase when
needed.
IMPORTANT: To ensure the long
life of your blender never run it
for longer than 60 seconds and
allow to cool for 5 minutes.
Switch off as soon as you have
reached the desired
consistency.
•
6
The machine will not work if the
www.morphyrichards.com
Don’t use the blender jug as a
storage container. Keep it
empty when not in use.
Never blend more than 1 litre
(13/4 pints)-less for frothy liquids
such as milk shakes.
CLEANING AND
STORAGE
Before cleaning and
maintenance, switch the
appliance off and unplug it.
After use, fill the glass jug with
warm water, 1 litre (13/4 pints) and
run for 30 seconds on the pulse
setting and repeat as necessary.
Never use abrasives or cream
cleaners.
Clean the blender base unit with
a damp cloth or kitchen paper
roll.
There is a facility to wrap your
power cable around the base of
the product, and fit the plug into
the plug holder.
Reassemble the jug by carefully
placing the glass jug on the
base unit ensuring it fits
correctly.
WARNING : Never immerse
the blender base unit in
water.
WARNING: If any liquid is
spilt in the top of the blender
base unit, switch off and
unplug from the socket and
dry with a cloth.
FP48953MUK-Rev1
19/5/06
14:08
Page 7
DEDICATED HELPLINE
If you have any difficulty with your
appliance, do not hesitate to call.
We are more likely to be able to
help than the store from where
you bought it.
Please have the following
information ready to enable our
staff to deal with your enquiry
quickly:
•
•
•
Name of the product
Model number as shown on the
underside of the appliance or
rating plate
Serial number
UK Helpline
Replacement Parts
Ireland Helpline
0870 060 2609
0870 167 6640
1800 409119
www.morphyrichards.com
7
FP48953MUK-Rev1
19/5/06
14:08
Page 8
YOUR FIVE YEAR
GUARANTEE
Model number and Serial
number on the product, or
write to Morphy Richards
at the address shown. You
will be asked to return the
product (in secure,
adequate packaging) to
the address below along
with a copy of proof of
purchase.
Subject to the exclusions
set out below (see
Exclusions) the faulty
appliance will then be
repaired or replaced and
dispatched usually within 7
working days of receipt.
If for any reason this item
is replaced during the
guarantee period, the
guarantee on the new item
will be calculated from
original purchase date.
Therefore it is vital to retain
your original till receipt or
invoice to indicate the date
of initial purchase.
Available on registration
This 5 year guarantee is
only valid when registered
directly with Morphy
Richards. If you do not
register your product it is
guaranteed for 2 years
To validate your 5 years
guarantee, telephone our
consumer helpline
Once you have registered
your product you will
receive written
confirmation from Morphy
Richards, please retain this
information.
Please refer to 2 year
guarantee for more
information.
YOUR TWO YEAR
GUARANTEE
It is important to
retain the retailers
receipt as proof of
purchase. Staple your
receipt to this back cover
for future reference.
Please quote the following
information if the product
develops a fault. These
numbers can be found on
the base of the product.
Model no.
4
5
This guarantee does not
confer any rights other
than those expressly set
out above and does not
cover any claims for
consequential loss or
damage. This guarantee is
offered as an additional
benefit and does not affect
your statutory rights as a
consumer.
•
To qualify for the
guarantee the appliance
must have been used
according to the
instructions supplied.
This guarantee is valid in
the UK and Ireland only.
Exclusions
Morphy Richards shall not
be liable to replace or
repair the goods under
the terms of the
guarantee where:
Serial no.
All Morphy Richards
products are individually
tested before leaving the
factory. In the unlikely
event of any appliance
proving to be faulty within
28 days of purchase it
should be returned to the
place of purchase for it to
be replaced.
If the fault develops after
28 days and within the
guarantee period from the
original purchase date, you
should contact the
Helpline number quoting
3
other than that stamped
on the products.
Repairs have been
attempted by persons
other than our service staff
(or authorised dealer).
Where the appliance has
been used for hire
purposes or non domestic
use.
Morphy Richards are not
liable to carry out any type
of servicing work, under
the guarantee.
1 The fault has been caused
2
or is attributable to
accidental use, misuse,
negligent use or used
contrary to the
manufacturers
recommendations or
where the fault has been
caused by power surges
or damage caused in
transit.
The appliance has been
used on a voltage supply
For electrical products sold within the
European Community. At the end of the
electrical products useful life it should
not be disposed of with household
waste. Please recycle where facilities
exist. Check with your Local Authority or
retailer for recycling advice in your
country.
The After Sales Division
Morphy Richards Ltd
Morphy Richards products are intended for household use only.
Morphy Richards has a policy of continuous improvement in product quality and
design. The company, therefore reserves the right to change the specification of its
models at any time.
Mexborough, South Yorkshire,
England, S64 8AJ
Helpline (office hours)
UK 0870 060 2609
Republic of Ireland 1800 409119
FP48953MUK Rev1 05/06
8
www.morphyrichards.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising