1023 connector line for precision video cables

1023 connector line for precision video cables
1023 CONNECTOR LINE FOR PRECISION VIDEO CABLES
White Sands Engineering 1.0/2.3 DIN connectors were specifically designed
for the broadcast industry, where high density routers are commonly used
and space is limited. They feature a one-piece design for fast, reliable
assembly with no parts to lose.
Part Number
Description
Strip
Crimp
1.0/2.3FPB
Plug for Mini RG59
1/4” x 1/8” CPT7538125
.213” ACT483
1.0/2.3FPB90
Right Angle Plug for Mini RG59
1/4” x 1/8” CPT7538125
.213” ACT483
1.0/2.3FPB1694
Plug for RG6 (1694A type)
1/4” x 1/4” CPT6590S
.324” ACT986
1.0/2.3FPB1505
Plug for RG6 (1505A type)
1/4” x 1/4” CPT6590S
.324” ACT986
1.0/2.3FPB179
Plug for 179DT Cable
1/4” x 1/4” Corex 2
.213” ACT483
1.0/2.3FPF
Jack for Mini RG59 (Panel Mount)
1/4” x 1/8” CPT7538125
.213” ACT483
1.0/2.3FPBH
Panel Mount Feed-thru Jack
---
---
1.0/2.3FPB RETURN LOSS
The 10REMTOOL allows for easy
removal of 1023 connectors from
high density backplanes.
HEADEND CONNECTIVITY
For more information, contact your local TVC representative at
888-644-6075, or our Applications Engineer, Dan Hamlett at
800-586-7377, x1641 or dhamlett@tvcinc.com.
2202 S. 7th St., Suite 120
Phoenix, AZ 85034
WSE0517
www.whitesandsengineering.com
800.586.7377
CISCO PRODUCTS
BROADCAST CONNECTIVITY
A/V CONNECTIVITY
ASSEMBLY SERVICES
TOOLING & ACCESSORIES
NOTES:
STEP 1: Strip the cable using the CPT7538125
or LDT-MINI-125 equivalent strip tool to
produce strip dimensions shown. *
STEP 2: Use hook side of Velcro to brush braid
back evenly around cable. Ensure there is no
braid wrapped around the center conductor,
creating a short.
STEP 3: Insert the center conductor and
dielectric with foil into the center diameter of
connector. Push connector onto the cable
while rotating the connector ½ a turn. No braid
should be visible behind the connector.
Step 1.
.250
YR46940 series, 1855A or 23 AWG solid precision video coax
.125
Step 2.
Step 3.
OPTIONAL: Continuity test cable before
crimping to ensure a good connection.
STEP 4. Crimp one time on the 3 rings of the
connector where shown using the .213 die on
the ACT483 or equivalent crimp tool.
Step 4.
Note: These instructions also apply to
1.0/2.3FPB90 and 1.0/2.3FPF connectors
* Contact White Sands for detailed strip tool
instructions, or for settings to use with Schleuniger
stripping machine.
THIS DRAWING IS THE PROPERTY OF WHITE
SANDS ENGINEERING AND CONTAINS
INFORMATION OF A CONFIDENTIAL AND
PROPRIETARY NATURE. NEITHER THIS
DRAWING NOR ANY OF THE INFORMATION
CONTAINED HEREIN MAY BE REPRODUCED,
USED, OR DISCLOSED TO OR FOR THE
BENEFIT OF ANY OTHER PERSON OR
ENTITY WITHOUT THE EXPRESS WRITTEN
CONSENT OF WHITE SANDS ENGINEERING.
DRAWN BY:
J. Lynch
UNLESS OTHERWISE NOTED
1) DIMENSIONS ARE IN INCHES
2) CABLE LENGTH TOLERANCES
00.00" - 12.00"
.25"
12.01" - 24.00"
.50"
24.01 - 80.00"
.75"
80.01 - 300.00" 1.00"
White Sands Engineering
2202 S. 7th St., Suite 120
Phoenix, AZ 85034
WSE0517
Date
01/04/10
www.whitesandsengineering.com
800.586.7377
White Sands Engineering
21615 N. 27th Avenue Phoenix AZ
1-800-586-7377
DWG Title:
PN#
Scale:
Mini Hex Crimp Connector Assembly
1.0/2.3FPB Assembly Instructions
None
SHEET 1 OF 1
Rev
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising