KneeRover Knee Scooter User Manual

KneeRover Knee Scooter User Manual
Congratulations on your purchase of the KneeRover®
Knee Scooter!
The versatile KneeRover® Knee Scooter provides a new level of
freedom to users recovering from foot, ankle or lower leg
injuries. This revolutionary product enables users to get back
to their daily routines and enjoy life while recovering –
increasing their mobility without the use of painful crutches.
Operating Instructions:
This medical device is designed to maximize mobility during your
recovery from foot/ankle surgery or injury.
Place the knee of your injured leg on the knee platform and stand as
straight as possible. Adjust the handlebar to waist height so the arms
and hands are in a comfortable position. Adjust the knee platform so
that your injured leg is supported at a 90 degree angle when standing.
Ensure that the hand brake is fully engaged before mounting the
KneeRover® scooter. To move the scooter, simply push forwards or
backwards with your good foot. Allow the scooter to glide, and as it
slows down, push again.
Safety First:
KneeRover® Knee Scooter
User Manual
The KneeRover® scooter is designed for easy steering and stopping
and should be used to carefully move about at slow, controlled
speeds. When turning the scooter, you should have the brake applied
and be moving at a slow, safe, controlled speed. It is easy to tip the
scooter if you are making a turn with too much speed. Use caution
and balance and operate at your own risk.
With routine use, nuts and bolts on steering column and brake
mechanism can and likely will become loose. Periodically check nuts
and bolts after use and re-tighten as appropriate.
Knee Scooter Set Up Instructions:
Please follow the step by step instructions on the following pages to
properly assemble your KneeRover® scooter. The diagram below
identifies the key components of the scooter to aid with assembly.
Weight Capacity = 300 pounds
Hand Brake Lever
Steering Column
Handlebar Height
Adjustment Knob
Brake Cable
Adjustable Knee Platform
Seat Post
Clamp Lever
Step 1: Install Steering Column
Insert the steering column tiller into the tube at the front of the frame
(as shown in the left photo). Lower the steering column towards the
rear by lifting the clamp lever up to release the clamp from the steering
column and pull the lever forward to disengage (as shown in the right
photo). Push the lever to the left and downward simultaneously to
disengage the security pin and gently guide the steering column
downward. Please ensure that the handle bars are aligned with the
wheels before proceeding.
Tiller
Push
Lever
Left to
Release
Security
Pin
Basket
Quick Release
Clamp
Rear Brake
Mechanism
8” Non Marking
Wheels
Next, take the provided allen wrench and tighten the exposed allen
screw - turn clockwise until tight (as shown in upper left photo on the
next page). Raise the steering column, and again push the lever to the
left and downward simultaneously to allow the security pin to lock into
place. Raise the clamp lever upward and tighten by turning it clockwise.
Finally, push clamp lever down firmly to secure the steering column (as
shown in upper right photo on the next page). Use the black knob to set
the handlebars at a comfortable height for operation – typically waist
height.
Set Up Instructions Continued
Tighten Allen Screw
Step 3: Brake Operation
To engage the hand brake, squeeze the brake lever on handle bar.
The KneeRover® scooter comes equipped with a brake lock /
parking brake. Simply squeeze brake handle firmly and press the
button to engage the lock. To release the lock, squeeze the brake
handle again.
Step 2: Install Knee Platform & Attach Basket
The knee platform is designed to be used with either the right or left leg.
Remove the knee platform from the bottom of the KneeRover® scooter by
removing the locking pin and loosening the clamp. Next insert the knee
platform post into the receptacle tube and set the knee platform at your
desired height for use by inserting the locking pin through the aligned
holes. Finally, tighten the clamp to secure the knee platform in place.
Removable basket attaches to the steering column.
Brake Lock
Ongoing Maintenance
Clamp
Lever
Locking
Pin
With routine use, nuts and bolts on the steering column and brake
assembly can become loose. To ensure safe operation of this
KneeRover® scooter it is important to periodically inspect the knee
walker for loose nuts and bolts and re-tighten as appropriate.
Who we are:
We are committed to providing innovative and affordable mobility
solutions to get you moving as soon as possible after injury or surgery
and for the duration of your recovery – free to go about your busy,
active life – and have a little fun doing it. We are all about leaving the
painful crutches behind and giving you the Freedom to Move.
The KneeRover® Team is Driven to Change Your Outcome!
Your Satisfaction is Our Top Priority:
Thank you for your business – we appreciate having you as a customer!
We hope that you are completely satisfied with your purchase. If you
have any issues, please contact us and we will do everything possible
to help you. Reviews have a significant impact on our small business.
If you purchased this product on Amazon or eBay, we would greatly
appreciate a review once you’ve had a chance to use your new
KneeRover® scooter. We hope we’ve earned a 4 or 5 star review – if
not, please give us the opportunity to help you before leaving a review.
Thank you for your support. We appreciate you!
Limited Lifetime Warranty:
This warranty applies only to the original purchaser.
This device was built to exacting standards and carefully inspected
prior to shipment. Your KneeRover® brand product is warranted
to be free of defects in materials and workmanship for a period of
one year from the date of purchase. The side frames and cross
braces are warranted for the lifetime of the KneeRover® scooter.
This warranty does not cover device failure due to owner misuse,
negligence, or normal wear and tear. The warranty does not
extend to non-durable components, which are subject to normal
wear and need periodic replacement. These components include,
but are not limited to: wheels, grips, brakes and upholstery.
The warranty shall not apply for damages or defects caused by
unauthorized parts, attachments or repairs, negligence, accident,
or any circumstances beyond the control of KneeRover®, such as
improper operation, maintenance or storage.
If you have any questions regarding your KneeRover® product or
this warranty, please contact our Customer Care Team. We are
available, for your convenience, toll free at 1-877-737-9877,
Monday – Friday from 9 am to 5 pm Eastern.
Need Help – Contact Us:
Phone: 1- 877-737-9877
Email: help@kneerover.com
Web: www.kneerover.com
KneeRover® is a registered trademark of Capital Grade Imports LLC.
Need Parts or Accessories?
Add an accessory like a deluxe backpack, knee pad cover, cup
holder or headlight to enhance your experience on your new
KneeRover® scooter. Keep your scooter operating in top shape
with original manufacturer parts. Visit our exclusive online
partner: kneewalkershop.com, to explore our full range of parts
and accessories.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising