NS-HZ315 In-Cabinet Remote Control Extender Kit

NS-HZ315 In-Cabinet Remote Control Extender Kit
Quick Setup Guide | NS-HZ315
In-Cabinet Remote Control Extender Kit
PACKAGE CONTENTS
SETTING UP YOUR EXTENDER KIT
• In-Cabinet Remote Control Extender Kit
• AC adapter
• Quick Setup Guide
1 Locate your AV device’s remote control (IR) sensor. To find it, shine a
flashlight at the front of your AV device and look for an “eye” that
resembles the emitters on the cable. If you can’t locate it, check the
documentation that came with your AV device.
FEATURES
• Enables remote control of four Audio/Video (AV) devices that are
located behind closed doors, cabinets, or walls
• Simple to install and use
• Long cable lengths allow for AV devices to be placed up to
10 ft. (3 meters) from the remote control (IR) receiver
• Built‐in adhesive for easy attachment to AV devices
Device remote
IR sensor
2 Remove the adhesive backing from an emitter, then stick it close to
and pointed towards the remote sensor on your AV device.
Emitter
Device remote
IR sensor
3 Remove the adhesive backing from the remote control receiver, then
stick it to the front of your AV cabinet or on or near your TV. It needs
to be in the line-of-sight of your remote control. Be sure it does not
cover the remote control sensor on your TV.
4 Connect the USB power connector to either the TV’s USB port or to
the AC adapter and then into a wall outlet.
5 Aim the AV device’s remote control at the remote control receiver.
Note: The emitters and receiver work with infrared, not visible, light, just like
your remote control (so you won’t see any lights blinking or flashing).
#
DESCRIPTION
FUNCTION
1
USB power connector
Connect to the AC adapter or a USB port on the TV or monitor.
2
Remote control
receiver (IR)
Receives the signal from the remote control.
Emitters (IR)
Transmits remote control signals to the AV devices.
3
AC adapter
OR
USB
connector
TV
AV device remote control
Remote control receiver
4
AC adapter
Connect to a wall outlet.
Emitter
Emitter
Cable/STB
Blu-Ray/DVD
Emitter
Emitter
AV receiver
Before using your new product, please read these instructions to prevent any damage.
Gaming device
TROUBLESHOOTING
ONE-YEAR LIMITED WARRANTY
No power.
• Make sure that the USB connector is connected to either the TV’s USB
port or to the AC adapter and then into a working wall outlet.
• On some TV's, the USB port may not be powered when the TV is
turned off. If that happens with your TV, either turn on your TV or use
the included AC adapter.
My source device remote does not control the audio/video.
• Aim your AV device remote at the remote control receiver.
• Make sure that the emitters are close to and pointed at the remote
sensors on your AV devices.
• Make sure that the remote control receiver does not cover the
remote sensor on your TV.
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
©2016 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 15-0910
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising