Untitled - Anixter

HDMI Accessories
4 Inputs to 1 Output - HDMI Switcher
HDMI4SWT
Extends range of HDMI compliant devices
Supports high resolution inputs
SPECIFICATIONS
• 4 input/1 output HDMI Switcher
• Switch easily between any 4 HDMI sources
by remote control or front panel button
• Extends range of HDMI compliant device by
equalizing and reclocking the HDMI signal
• HDTV: 480i, 576i, 480p, 576p,
720p, 1080i and 1080p @60Hz
• Supports high-resolution inputs:
PC: VGA, SVGA, XGA, SXGA,
UXGA, WUXGA (1920x1200)
• Supports both audio and video signals
• HDMI 1.3 compliant/ HDCP pass-through
• IR remote control included
VGA & Stereo/Digital Audio To HDMI
VGAHDMI
Local loop VGA output
Supports HDMI & DVI output
SPECIFICATIONS
• VGA & stereo/digital audio to HDMI
converter with local loop VGA output
• Supports HDMI & DVI output mode
• Encodes analog stereo audio or digital audio onto the video signal for HDMI
audio and video
• Supports PC resolution up to 1920x1080
Component Video To HDMI Converter
COMHDMI
Local loop component input
No power required
SPECIFICATIONS
• Component Video to HDMI converter
with local loop component input
• Convert component video (YPbPr)
& stereo/digital (SPDIF) audio to
HDMI display
• Built-in local component video loop output
with stereo/digital (SPDIF) audio
• Encodes analog stereo audio or digital audio
onto the video signal for HDMI audio and video
• Supports HDTV resolution up to 1080p
2
Speco Technologies 1.800.645.5516
Audio Accessories
Audio CAT5 Extender
UTPAUDIO
Ground loop device
No power required
SPECIFICATIONS
• Gold-plated RCA female to RJ45
• Used in pairs via one CAT5 UTP cable
to send audio signal of up to 1 mile
• 20Hz to 20kHz bandwidth
• Available for 75 – 120 ohm cable
• High performance to eliminate
audio ground loop problem
• No power required
• Sold in pairs
Stereo/Mini Stereo Audio CAT5 Extender
STRXTNDR
Ground loop device
No external power required
SPECIFICATIONS
• Dual gold-plated RCA female
+ 3.5mm mini jack to RJ45
• Stereo or mini-stereo selector switch
• No external power required
• Sold and used in pairs via CAT5 UTP cable
• Can send audio signal up to 2000’
• 20Hz to 20kHz bandwidth
• Hi performance to eliminate
audio ground loop
Hi Impedance Line Level Universal Mic
CAMMIC
Add-On mini microphone
Easy to install
SPECIFICATIONS
•Add-on mini microphone for all systems
• High sensitivity microphone with
1.5 ft. power/audio cable
•Easy to install and ideal for
all security surveillance audio
recording applications
• Line level output
www.specotech.com
3
Baluns, Extenders, Repeaters
POE Injector - 12.95W
IPPOEINJ1295
Splits DC48V Power Over RJ45
Use with POESPL1295 Splitter
SPECIFICATIONS
• Compatible with IEEE 802.3af (12.95W) POE standard, PSE/PD
• Injector provides DC48V power over RJ45 Ethernet cable to device
with Ethernet port
• Supports POE power up to 12.95W for POE port
• Support 10/100/1000 BASE-T transmission rate
• Power input LED indicators
• Distance up to 325’
• For use with POESPL1295 Splitter
POE Splitter - 12.95W
IPPOESPL1295
DC48V Power Over RJ45
Use with POESPL1295 Injector
SPECIFICATIONS
• Compatible with IEEE 802.3af (12.95W) POE standard, PSE/PD
• Splits the DC48V power over RJ45 Ethernet cable into
DC 5V/12V output
• Support 10/100/1000 BASE-T
• Two adjustable output voltage options (5V/1.8A, 12V/1A) to fit
various devices
• BASE-T transmission rate
• Power input LED indicators
• Distance up to 325’
POE Injector - 25W
IPPOEINJ25
DC56V Power Over RJ45
Use with POEINSPL25 Splitter
SPECIFICATIONS
• Compatible with IEEE 802.3af (25W) Gigabit high power over
Ethernet pre-standard, PSE/PD
• Injector provides DC56V power over RJ45 Ethernet cable to device
with Ethernet port
• Supports POE power up to 25W for POE port
• Support 10/100/1000 BASE-T transmission rate
• Power input LED indicators
• Distance up to 325’
• For use with POESPL25 Splitter
4
Speco Technologies 1.800.645.5516
Baluns, Extenders, Repeaters
POE Splitter - 25W
IPPOEINSPL25
DC56V Power Over RJ45
Use with POEINJ25 Injector
SPECIFICATIONS
• Compatible with IEEE 802.3 at (25W) Gigabit high power over
Ethernet pre-standard, PSE/PD
• Splits the DC56V power over RJ45 Ethernet cable into
DC 5V/12V output
• Support 10/100/1000 BASE-T
• Two adjustable output voltage options (5V/3.6A, 12V/1.8A)
to fit various devices transmission rate
• Power input LED indicators
• Distance up to 325’
POE/LAN Repeater
IPPOEERPT
Extends power & data 1000’
No external power required
SPECIFICATIONS
• Extends both power and data up to 1000’
• No external power required
• Compatible IEEE 802.3af POE standard
• Support 10/100/1000 BASE-T transmission rate
• Built-in LED status indication
• Plug and play for easy installation
Passive Baluns
VIDUTP
Long run solution
Up to 1900’ transmission
SPECIFICATIONS
• Allows the use of UTP CAT-5E cabling. More flexible security
and surveillance cabling for quicker installations
• Allows up to 1900 feet for B/W, 1000 feet for color, via CAT-5 UTP
• Screw terminals for easy connection
• Compact design
• Sold in pairs
Composite Video & Audio CAT5 Extender
COMXTNDR
Includes transmitter & receiver
No external power required
SPECIFICATIONS
• 3 RCA (female) to RJ45 (female)
• No external power required
• Sold and used in pairs via one CAT5 UTP cable
• Can send video and stereo audio up to 1000’
• Two-way audio transmission and one-way video transmission
www.specotech.com
5
Baluns, Extenders, Repeaters
CAT5/VGA Extender
IPXTNDR
Includes transmitter & receiver
No power required
SPECIFICATIONS
• Send IP camera signal over existing CAT5 cable
• Exceeds 802.3 10BaseT NEXT specification,
isolating the receiver from the transmission signal
• Transmission up to 3,280 feet (max.)
• Power supplies included
CAT5 3,280 ft. Max
IP CAMERA OR VIDEO SERVER
IPXTNDR
IPXTNDR
COMPUTER
Ground Loop Isolator Built-In Video Balun
VIDGL/UTPGL
For Coaxial & UTP
Up to 1900’ transmission
SPECIFICATIONS
• BNC male to 2 pin terminal
block (UTPGL) or BNC female to BNC male
• Built-in video BALUN transmits a full motion monochrome
video signal up to 1,900 ft., color video signal up to 980 ft.
• Eliminate coaxial cable
• Built-in TVS (Transient Voltage Suppressors) for surge protection
Coaxial Balun for DVR
VIDDVR
BNC Male to BNC Female
Gives DVR immunity from interference
SPECIFICATIONS
• BNC male to BNC female with mini cable 11.8”
• Gives DVR immunity from interference
• Built-in highly balanced mode of video transmission which is immune to
interference from sources of noise: data signals, other video signals,
nearby power, ringing telephones, fluorescent lights, transformers and more
DVI CAT5 Extender
DVIXTNDER
Includes transmitter & receiver
No external power required
SPECIFICATIONS
• 1 in/1 out
• Includes transmitter and receiver
• Used in pairs via one CAT5/5e/6 cable to send DVI signal
• No external power required
• Transmission distance:
1024x768: 225’
1920x1200: 160’
6
Speco Technologies 1.800.645.5516
Baluns, Extenders, Repeaters
VGA/Keyboard/Mouse CAT5 Extender
KVMPC2
PS/2 interface
Transmission range up to 300’
SPECIFICATIONS
• Extend VGA and keyboard mouse over 2 CAT5 UTP cables
(instead of VGA cable and keyboard mouse cable)
• Allows extension for transmission range of up to 300 feet
• Includes local and remote unit
• No power required­
Keyboard/Mouse CAT5 Extender
KMUSB
USB interface
Transmission range up to 300’
SPECIFICATIONS
• Extend USB keyboard and mouse via one CAT5 cable
•Allows extension for transmission range of up to 300 feet
• Includes local and remote unit (local unit – PC side: USB to RJ45,
remote unit (keyboard mouse side): RJ45 to PS/2
• No power required
CAT5/VGA Extender
VGA135
Includes transmitter & receiver
No power required
SPECIFICATIONS
• Operate your VGA monitor up to 440’ through CAT 2 cable
• Includes 2 units: transmitter and receiver
•Transmitter built-in virtual DDC to avoid improper setting for
resolution & frequency and built-in sync mode selection for
signal stability
•Receiver has built-in sync mode selection for signal stability
•Supports up to 1290 x 1024 pixels
•Extend transmission range to over 440’ via standard 4 pairs CAT6
UTP/STP cable instead of VGA cable
•No power required
•Perfect for classroom, lecture halls, video information displays, etc.
CAT5 Long Range VGA Receiver
VGAR
Long run solution
Power supply included
SPECIFICATIONS
• VGA receiver for VGADIST5 or VGADISTK2 for remote VGA
Display Equipment
• Built-in contrast, brightness adjustment
• Supports up to 1600 x 1200 @85Hz • Power supply included
www.specotech.com
7
Baluns, Extenders, Repeaters
CAT5/VGA Kit
VGADISTK2
1 Input to 2 output splitter
Transmitter range up to 980’
SPECIFICATIONS
• Dual output: 1 VGA loop output for local, plus 1 x CAT5 RJ45
output for remote side
• Use of CAT5 cable instead of VGA cable
• Long range transmission of up to 980 feet (max).
• Built-in contrast, brightness adjustment at VGAR receiver
• Supports up to 1600 x 1200 @ 85Hz
KIT INCLUDES:
• One VGADIST2 transmitter
• One VGAR receiver • Two power supplies
980 ft. Max
VGAR
VGADIST2
VGA
DISPLAY
VGA DISPLAY
CAT5/VGA Kit
VGADISTK5
1 Input to 5 output splitter
Transmitter range up to 980’
SPECIFICATIONS
• Dual output: 1 VGA loop output for local, plus 4 x CAT5 RJ45
outputs to remote monitors
• Up to 4 VGAR receivers for each remote monitor with VGA input
(order separately)
• Allows use of CAT5 cable instead of VGA cable
• Power supply included
• Long range transmission of up to 980 feet (max).
• Built-in contrast, brightness adjustment at VGAR receiver
• Supports up to 1600 x 1200 @85Hz
KIT INCLUDES:
• One VGADIST5 transmitter
• One VGAR receiver • Two power supplies­
CAT5 Cable
980 ft. Max
PC
VGADISTK5
VGA DISPLAY
8
CAT5 VGA
DISTRIBUTOR
Speco Technologies 1.800.645.5516
VGA DISPLAY
Distribution Accessories
1 Input to 4 Outputs - Video Distributor
VIDDIST
For use with coaxial cabling
For color and/or B/W cameras
• 1 video input to 4 video outputs
• Power: 12VDC
• Operates with Color or B/W signals
BNC75 (Optional)
• 75 ohm resister ­in a BNC connector
• Terminates unused outputs of a distribution amplifier (VIDDIST)
• Can be used with any video equipment requiring a 75 ohm
BNC termination
1 Input to 1 Output Video Amplifier
VIDAMP
Video gain compression
For color and/or B/W cameras
SPECIFICATIONS
• 1 video input to 1 video output
• 10dB video gain compensation, amplification and HF compensation
• Sharpness and brightness adjustment works perfectly with DVR
• Transmission range: 3,200 ft. (RG59 coaxial cable)
• Requires 12V power supply (not included)
4 Input to 4 Output Video Amplifier
VID4AMP
Video gain compression
Works perfect with DVRs
SPECIFICATIONS
• 4 video input to 4 video output
• 10dB video gain compensation, amplification and HF compensation
• Sharpness and brightness adjustment works perfectly with DVR
• Transmission range: 3,200 ft. (RG59 coaxial cable)
4 Channel Active Receiver
UTP4AR
Extended range for UTP transmission
12VDC Power supply included
SPECIFICATIONS
• Built-in 4 port active receivers
• Built-in highly balanced mode of video transmission for extra
interference immunity
• Extended range for UTP transmission
• 12VDC power supply included
www.specotech.com
9
Distribution Accessories
Active Video/Audio/Data Transmission
UTP4A
Extended range for CAT-5E transmission
Power supply included
SPECIFICATIONS
• Active Video/Audio/Data twisted pair transmission
• Transmit video, audio and data signal (RS422, RS485)
• Three position range switch for gain select on transmitter
• Five position activation switch on receiver, brightness adjustment, two video outputs
• Built-in transient protection and ground lifting
• Power supply included
16 Port Passive Transceiver HUB
UTP16P
Up to 3,200’ range
No power required
SPECIFICATIONS
• 16 port passive transceivers in 1U 19” rack mounting panel
• Passive transmitter hub, use with active receiver at a distance
up to 3,200 ft.
• Passive, no power required
• Built-in a highly balanced mode of video transmission for
extra interference immunity
16 Port Active Transceiver HUB
UTP16AR
Up to 3,200’ range
Extended range for UTP transmission
SPECIFICATIONS
• 16 port active receivers in 1U 19” rack mounting panel
• Active receiver hub, use with active transmitter at a distance up to 3,200 ft.
• Built-in a highly balanced mode of video transmission for extra
interference immunity
• Built-in transient protection and ground lifting
• Extended range for UTP transmission for extra interference immunity
4 Channel Passive Video Receiver
UTP4P
SPECIFICATIONS
• 4 x BNC female to 1 x RJ45 female and 8 pin terminal block
• Four passive transceivers in one product
• RJ45 and push pin terminal inputs/ outputs
10
Speco Technologies 1.800.645.5516
Distribution Accessories
Video Transceiver 10” Mini Coax BNC Cable
UTPPTAIL
Weather resistant IP65
Compact size
SPECIFICATIONS
• Compact size, perfect to connect with an image processor which
has multi BNC connections such as a multiplexer, quad, DVR, etc.
• BNC male to terminal block
• Weather resistant, IP65
• Full balun operation
Power and Video Over CAT-5E
VIDCAT2
Works with any baseband signal
For color and/or B/W cameras
SPECIFICATIONS
• Speco Technologies CAT-5E conversion kit, allows transmission of
video and power over CAT-5E cable. The kit includes a transmitter
& receiver
• Allows video and power over CAT-5E cable up to 600 ft.
• Works with any baseband signal (not just cameras)
• Can be used with all Speco Technologies B/W & color cameras
• Ideal for new construction and retrofits
• Compatible with current TIA-568 & TIA-570 structured CAT-5
cabling standards
• Connects to CAT-5E through the use of a 6-pin terminal connector
• Add your own 12VDC power supply not supplied.
Video Transceiver BNC To Screw Terminal
MVTBNCSCR
BNC (male) to screw terminal
Compact size
SPECIFICATIONS
• BNC (male) to screw terminal for easy connection
• Compact size. Multiple units could be mounted behind
multiplexer, quad, DVR, etc.
• Sold in packs of 10
• Also available with 10cm mini coax cable: MVTBNCSCRPTL (sold individually)
www.specotech.com
11
Modulators & Converters
Channel 3/4 Modulator
RFM1A
SPECIFICATIONS
• Converts a composite video signal to an
NTSC RF signal
• Set for channel 3-4
• Connect a video camera to a TV antenna for security surveillance
• Connect a home satellite receiver to a standard TV antenna
• Inputs: RCA, Audio and Video
• Outputs: F connector - UL listed
• 3.25”L x 4.5”W x 1.25”H
Full Range RF Modulator
MOD100D
LED display
Converts video/audio signals to RF
SPECIFICATIONS
• Digital phase lock loop tuning eliminates channel drift
• 120 selectable channels
UHF - Channels 14-69
Cable Channels 65-94,100-125
• Full channel memory for power outages
• Surface mount technology PC Boards
• Isolated left & right inputs improve audio performance for
multiple audio inputs
• EZ tuning setup
• 3.8”L x 4.1”W x 1.5”H
VGA to BNC Converter
VGABNC
Windows & Mac® compatible
On-screen display background
SPECIFICATIONS
• Connects VGA output to existing
TV or CRT monitor
• Video standards:
NTSC/NTSC-EIAJ/PAL/PAL
M/PAL-N/SECAM
• Resolutions supported:
640x480 (up to 85Hz)
800x600 (up to 85Hz)
1024x768 (up to 75Hz)
• Dual output ports: Composite
Video (BNC connector)
• VGA (DB15)
• On-screen display background
• Simple and quick to install
12
• Image controls:
Horizontal and vertical size
Brightness
Contrast
Hue
Saturation
Sharpness
Speco Technologies 1.800.645.5516
Modulators & converters
RS232 to RS485 Converter
RS232485C
Up to 3,900’ range
Passive operation
SPECIFICATIONS
• RS232 DB9 serial female converting terminal block
for RS485 - Data in/output
• Two wire, different signals, half duplex
• Passive operation
• Auto sensing baud rate, speeds up to 115,200 baud over
a distance of 3,900 ft.
• Units connected together in RS-485 multidrop operation
IP Converter for RG59 Coax
IPRG59
USB interface
Transmission range up to 300’
IPRG59
RG59
COAX CABLE
650 ft. Max
IPRG59
COMPUTER
IP CAMERA OR VIDEO SERVER
High Resolution Video to VGA Converter
BNCVGAHR
Compact size
OSD video control
SPECIFICATIONS
• Input: allows composite video output to be viewed on a VGA
monitor (CRT or LCD)
• Dual output: BNC x 1 for TV monitor and DB15 x 1 for VGA monitor
• High resolution VGA display up to 1280 x 1024 @60Hz
• Frequency output: 59Hz to 85Hz
• On screen display function: Hue, Brightness, Contrast, Saturation
• OSD video control
• Compact size and low working temperature
DVR
OR
BNCVGAHR
CAMERA
VGA MONITOR
LCD OR CRT
www.specotech.com
13
Power Accessories
Video & Power Surge Protector
SPVP
Two stage protection
2A max current
SPECIFICATIONS
• Two-stage protection: 130V, AC/DC12V
• 2-pin terminal + BNC male to 2-pin terminal + BNC female
• Max power input:
AC 40V Max
DC 56V Max
• Max current up to 2Amp
UTP Data Surge Protector Terminal Connector
SPUTPVD
SPECIFICATIONS
• Terminal connector to terminal connector
• Perfect for video or data signal protection
Network Surge Protector
SPIP
RJ45 to RJ45
Four pair protection
SPECIFICATIONS
• RJ45 Jack to RJ45 Jack
• Four pair protection
• Perfect for protecting IP camera, network, PC modem, server, etc.
• Protects UTP twisted pair products or any computer equipment
utilizing a network cable
POE Surge Protector
SPPOE
RJ45 Jack
No external power required
SPECIFICATIONS
• RJ45 Jack to RJ45 Jack
• Power and signal line protection
• 10/100 BASE-T CAT5/5e compatible
• 802.3af POE compatible
DC Plug to Terminal Block
DCPLGBLOK
Fits into tight spaces
Sold in packs of 10
SPECIFICATIONS
• DC plug (male) to removable terminal block
• Small size to fit in tight spaces
• 2.1mm DC Plug
• Sold in packs of 10
14
Speco Technologies 1.800.645.5516
Power Accessories
USB Power Loss Detector
USBPL1
Triggers alarm or other notification
5V DC operation
The USBPL1 detects the power output of any active USB port on a
DVR or computer. If the power is interrupted, the output status of the
leads changes and can be used to trigger an alarm or other notification.
• Operating Voltage: 5V DC as supplied by USB port
• Pick-Up Voltage: 3.75V DC
• Operating Current:28.1mA (140mW)
• Dimensions: 3” W x 0.9” H x 0.9” D
• Wire Length: 5.9”
Converts 24 Volts AC to 12 volts DC
VID2412CONV
Regulated 12VDC output
5 year warranty
SPECIFICATIONS
• Operate your 12 Volt DC cameras on a variety of voltages
• Regulated 12 Volt DC output @ 500 mA
• Accepts 20 to 28 Volts AC and converts it to 12 Volts DC
• Accepts 15 to 30 Volts DC and converts it to 12 Volts DC
• Voltage input via 2-pin terminal block
• 12 Volt DC output via 2.4 coaxial female power connect
• Mechanical: Converter is 2.5”L x 1.2”W x .9”H;
Input and output cables are .5” each
Rack Mount Power Conditioners
Power Conditioner
PCN8
Protects from power spikes and surges
8 AC switched outlets
FEATURES
• RFI/EMI interference filter
• 8 AC switched outlets on rear panel and
one unswitched AC outlet on front panel
• Circuit breaker
• Dual retractable rack illuminators
• Front panel LED meter displays incoming AC line voltage
SPECIFICATIONS
• Current rating: 15A
• Operating voltage: 90 to 140 VAC
• Overvoltage shutdown: 140 VAC
• Spike protection modes: Line to neutral, zero ground leakage
• Response time: 1 nanosecond
• Maximum surge current: 6,500A
• Dimensions: 1.75” x 19” x 7.5”
PCN8 Rear Panel
www.specotech.com
15
Rack Mount Power Conditioners
Power Sequencer & Conditioner
PSQ8
2x digital filter/4x analog filter
Power down reverses sequence
FEATURES
Power up and power down 3 outlet groups in a delayed sequence
• Power up in 3 groups:
2x Digital filtered
4x Analog filtered
2x High-Power filtered
• Power down reverses sequence
• RFI filtering with multi-stage PL filter
• 2 unswitched outlets on front panel
• Circuit breaker
• Multiple units may be linked to handle higher currents
• Four pairs of switched outlets on rear panel
• Front panel digital LED meter displays incoming AC line voltage
• A single, super bright, retractable, long-life, low-heat LED light
with high/low/off switch for rack illumination
SPECIFICATIONS
• Current rating: 15A
• Operating voltage: 90 to 140 VAC
• Overvoltage shutdown: 140 VAC
• Spike protection modes: Line to neutral, zero ground leakage
• Delay interval: 5 seconds
• Response time: 1 nanosecond
• Maximum surge current: 6,500A
PSQ8 Rear Panel
• Dimensions: 1.75” x 19” x 7.5”
16
Speco Technologies 1.800.645.5516

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project