EM4595 Universal Wi-Fi repeater with WPS

EM4595 Universal Wi-Fi repeater with WPS
EM4595
Universal Wi-Fi repeater with WPS
2 | ENGLISH
EM4595 – Universal Wi-Fi repeater with WPS
Table of contents
1.0 Introduction ...........................................................................................................2
1.1 Packing contents ...............................................................................................2
1.2 Device Overview................................................................................................3
2.0 Where to place the EM4595 repeater? .................................................................. 5
3.0 Configure the wireless repeater using the WPS button .......................................... 6
4.0 Connecting a wireless WPS adapter to the EM4595 ..............................................7
5.0 Configuring the EM4595 manually .........................................................................7
5.1 Manual configuration .........................................................................................7
6.0 Access Point mode ..............................................................................................10
7.0 Frequently Asked Questions and other related information .................................. 12
8.0 Service and support............................................................................................. 12
9.0 Warning and points of attention ...........................................................................12
10.0 Warranty conditions ...........................................................................................14
1.0 Introduction
Congratulations with the purchase of this high-quality Eminent product! This product
has undergone extensive testing by Eminent’s technical experts. Should you
experience any problems with this product, you are covered by a five-year Eminent
warranty. Please keep this manual and the receipt in a safe place.
Register your product now on www.eminent-online.com and receive product updates!
1.1 Packing contents
The following parts need to be present in the packing:
•
EM4595
•
QIG
•
Ethernet cable
3 | ENGLISH
1.2 Device Overview
Front Panel
WPS
Signal Indicator
LABEL
LED Signal strength
3 BARS
2 BARS
1 BAR
LABEL
WPS Button
STATE
DESCRIPTION
Connected
Connected
Connected
90% and above (Excellent)
55-89% (Recommended)
10-54% (Weak)
DESCRIPTION
Connect EM4595 to any WPS capable devices (5 sec. to
connect to router/AP or 2 sec. when connecting a wireless
client)
4 | ENGLISH
Bottom panel
LAN
Side panel
Reset
LABEL
DESCRIPTION
RESET
Press the reset button for 5-7 seconds to restore the device
to default factory settings wait approx. 1 minute for the
device to reboot (Signal indicator turns green).
Connect to computers / Ethernet devices, or modem/router
using as AP
Ethernet port
5 | ENGLISH
2.0 Where to place the EM4595 repeater?
The best location to place the EM4595 is approximately half-way between your
wireless router and your wireless computer(s) which has/have the weakest wireless
reception. This way, the signal strength will be as good as possible. Refer to the
following images for an example:
Hint: Before placing the EM4595 on its destined location, the device needs to be
setup. Setting up the EM4595 wireless repeater can be done best, if the EM4595 is
located near your wireless router. After setting up the EM4595, you can place the
EM4595 at a location defined by using the signal indicator LEDs and the
recommended setup as described previously.
6 | ENGLISH
3.0 Configure the wireless repeater using the
WPS button
1. Please check if your wireless modem/router has a WPS button. Also check
whether your wireless router has a properly configured internet connection.
2. Connect the EM4595 to a wall outlet. Please place the EM4595 close to the
modem/router during setup.
3. Wait for the LED to turn green.
4. Press the WPS button on your wireless router for approximately 3 seconds*.
5. Now press the WPS button on the EM4595 Wireless Repeater for approximately 5
seconds. Refer to the following image for the WPS button:
WPS
6. The connection between your wireless router and the EM4595 wireless repeater
will be established automatically (this will take approx. 1 minute including reboot).
The smart led indicator will stop flashing and indicate the signal strength. Wait
until the WiFi led turns blue.
*Refer to the manual of your wireless router for the exact duration of pressing the
WPS button. This can differ from brand or model.
7 | ENGLISH
Note: If the WPS button is used, the SSID and network key are the same as used on
your wireless router. Some WPS routers will change their original SSID to another
SSID if WPS is used. In this installation guide, the SSID of the wireless router is
‘Eminent’.
4.0 Connecting a wireless WPS adapter to the
EM4595
1. Press the WPS button on the EM4595 for about 3 seconds.
2. Now press the WPS button on your wireless adapter.
3. The connection between the wireless WPS adapter and EM4595 will be
established. Depending on the Windows version you are using, you should see a
connected icon in the taskbar.
Note: Some wireless WPS adapters require the use of the supplied software to create
a WPS connection. Refer to the manual of your wireless WPS adapter for more
information.
5.0 Configuring the EM4595 manually
It is possible to configure the repeater manually instead of using the WPS button.
5.1 Manual configuration
1. Connect the EM4595 to a wall outlet (preferably close to the modem/router).
2. Wait for the signal indicator to turn green. This will take approximately 1 minute.
3. Connect to the EM4595 via Wi-Fi SSID: Eminent_repeater, or use the Ethernet
cable to connect to the EM4595 directly.
4. Open your internet browser and type http://192.168.10.1 in your internet browser
and then hit Enter.
5. The login screen will appear. Enter the Username: “admin” and Password:
“admin”, then click “Log in” to login.
8 | ENGLISH
6. The Repeaters menu will appear.
9 | ENGLISH
7. Make sure Repeater mode is enabled.
8. Click on the Site Survey button.
9. You will see a screen with all the available Wi-Fi networks.
11
12
10
10. Select the corresponding network you want to connect to in the “Select” field.
11. Your router’s Wi-Fi network name will be shown in the Network Name ( SSID )
field.
12. Enter the security key of your wireless network in the Pre-Shared Key field.
13. If you want to ensure easy login to your repeater after connecting to your home
network, you can select the option Auto configure LAN IP address. Your repeater
will now obtain ip address from your router. If you don’t change this option the
repeaters ip address will remain 192.168.10.1.
14. Click on Save/Apply button.
15. The EM4595 will reboot and connect to your router.
16. You can now connect your wireless network adapter(s) to your repeaters Wi-Fi
network name and entering the wireless security key of the wireless network you
previously connected.
Note: After the settings have been applied, the EM4595 will reboot. Your device will no
longer be connected to the wireless network SSID of the EM4595.
10 | ENGLISH
6.0 Access Point mode
1. Connect the EM4595 to a wall outlet (preferably close to the modem/router).
2. Wait for the signal indicator to turn green. This will take approximately 1 minute.
3. Connect to the EM4595 via Wi-Fi SSID: Eminent_repeater, or use the Ethernet
cable to connect to the EM4595 directly.
4. Open your internet browser and type http://192.168.10.1 in your internet browser
and then hit Enter.
5. The login screen will appear. Enter the Username: “admin” and Password:
“admin”, then click “Log in” to login.
6. The Repeaters menu will appear.
11 | ENGLISH
7. Select Access Point (AP)
The following screen appears.
8. You will notice that the repeater will automatically fill in the default network name
from repeater in to Network Name (SSID) field. It is not necessarily needed but we
12 | ENGLISH
9.
10.
11.
12.
13.
14.
15.
suggest to rename the network name to: network name + AP so you will always
know that you are connected as Access Point.
You also have the option to secure the Wi-Fi network by adding an security key.
Fill in wireless security code in Key Value field.
Click “Save/Apply” to confirm. The repeater will reboot and make the changes.
This will take approximately 1 minute.
Remove the repeater from the power socket.
Install your Ethernet cable from modem/router or router into the “LAN” port of the
repeater.
Connect the EM4595 back to the wall outlet.
Wait until the “smart led indicator” lights up the three leds. This will take
approximately 1 minute.
You can now make wireless connection with new made network name ( SSID )
configured as Access Point.
7.0 Frequently Asked Questions and other
related information
The latest Frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.eminent-online.com for more information about
your product.
8.0 Service and support
This user manual has been carefully written by Eminent’s technical experts. If you
have problems installing or using the product, please fill out the support form at the
website www.eminent-online.com/support.
You can also contact us by phone. Please check www.eminent-online.com/support for
the helpdesk phone number and opening hours.
9.0 Warning and points of attention
Due to laws, directives and regulations set out by the European parliament, some
(wireless) devices could be subject to limitations concerning its use in certain
European member states. In certain European member states the use of such devices
could be prohibited. Contact your (local) government for more information about this
limitations.
Always follow up the instructions in the manual*, especially where it concerns devices
which need to be assembled.
13 | ENGLISH
Warning: In most cases this concerns an electronic device. Wrong/improper use may
lead to (severe) injuries!
When you connect the device to the mains, make sure it will not be damaged or
subject to (high) pressure.
A power socket is needed which should be close and easy accessible from the device.
Repairing of the device should be done by qualified Eminent staff. Never try to repair
the device yourself. The warranty immediately voids when products have undergone
self-repair and/or by misuse. For extended warranty conditions, please visit our
website at www.eminent-online.com/warranty.
Dispose of the device appropriately. Please follow your countries regulation for the
disposal of electronic goods.
Please check below safety points carefully:
- Do not apply external force on the cables
- Do not unplug the device by pulling the power cable
- Do not place the device near heating elements
- Do not let the device come in contact with water of other liquids
- If there is any strange sound, smoke or odor, remove the device immediately from
the power outlet.
- Do not put any sharp objects into the venting hole of a product
- Do not use any damaged cables (risk of electric shock)
- Keep the product out of reach of children
- Wipe off the product with soft fabric, not water mop.
- Keep the power plug and outlet clean
- Do not unplug the device form the power outlet with wet hands
- Unplug the device when you don’t use it for a long time
- Use the device at a well ventilated place
*Tip: Eminent manuals are written with great care. However, due to new technological
developments it can happen that a printed manual does not longer contain the most
recent information. If you are experiencing any problems with the printed manual or
you cannot find what you are looking for, please always check our website
www.eminent-online.com first for the newest updated manual.
Also, you will find frequently asked questions in the FAQ section. It is highly
recommended to consult the FAQ section. Very often the answer to your questions will
be found here.
14 | ENGLISH
10.0 Warranty conditions
The five-year Eminent warranty applies to all Eminent products, unless mentioned
otherwise before or during the moment of purchase. After buying a second-hand
Eminent product the remaining period of warranty is measured from the moment of
purchase by the product’s initial owner. Eminent warranty applies to all Eminent
products and parts, indissolubly connected or mounted to the product it concerns.
Power supply adapters, batteries, antennas and all other products not directly
integrated in or connected to the main product or products of which, without
reasonable doubt, can be assumed that wear and tear during use will show a different
pattern than the main product, are not covered by the Eminent warranty. Products are
not covered by the Eminent warranty when exposed to incorrect/improper use,
external influences or when opening the service parts of the product by parties other
than Eminent. Eminent may use refurbished materials for repair or replacement of
your defective product. Eminent cannot be held responsible for changes in network
settings by internet providers. We cannot guarantee that the Eminent networking
product will keep working when settings are changed by the internet providers.
Eminent cannot guarantee the working of web services, apps and other third party
content that is available through Eminent products. Eminent products with an internal
hard disk have a limited warranty period of two years on the hard disk. Eminent could
not be held responsible for any data lost. Please make sure that if the product stores
data on a hard drive or other memory source, you will make a copy before you return
the product for repair.
When my product gets defective
Should you encounter a product rendered defective for reasons other than described
above: Please contact your point of purchase for taking care of your defective product.
EM4595-EN | 10-2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising