C200 Series Boundary Microphones VM100 Hand-held - CIE

C200 Series Boundary Microphones VM100 Hand-held - CIE
Paging Microphones - Boundary & Handheld
C200 Series Boundary Microphones
VM100 Hand-held Microphone
Designed for use in applicable high quality sound systems - conferences, stage
sound reinforcement, ambient noise monitoring, etc - where the advantage of flat
surface-mounted boundary microphones can be utilised.
Incorporating a superior anti-shock mount for the cardioid microphone capsule
to ensure minimal handling and cable noise transfer, the VM100 is also physically
well balanced for low hand stress.
Boundary microphones can be directly mounted on most non-resonant, smooth,
non-sound absorbent surfaces to provide the benefits described.
Features:
Features:
• C200 is available with or without ‘On/Off’ switching and is phantom powered
from 24 ~ 48v DC
• An integral LED indicates connection
• Interface connection is via a miniature XLR wired to a 4.5m cable terminated
with a male XLR
• Also available in white
Order Codes:
•Suitable for all applications - speech, vocals, musical instruments - it features excellent
transient response; providing clean, articulate sound
•Anti-pop protection and the ability to withstand rugged operational conditions is
provided by the hardened steel outer mesh of the microphone head, lined internally with
open cell foam and a fine steel mesh
•Incorporates a quiet ‘On/Off’ switch and a PVC pouch for protection during transport
and storage
Order Codes:
C200:
Without ‘On/Off’ switch (finished in black)
C200/PTT:
With latching ‘On/Off’ switch (finished in black)
C200W:
Without ‘On/Off’ switch (finished in white)
C200/PTT/W:
With latching ‘On/Off’ switch (finished in white)
VM100:
Hand-held microphone
Specifications:
Specifications:
Model:
C200 Series:
Model:
VM100:
Transducer Type
Electret
Capsule
Moving Coil Dynamic
Polar Pattern
Semi-cardioid
Polar Characteristic
Cardioid
Frequency Response
50Hz ~ 18KHz ±3dB
Frequency Response
50Hz ~ 14KHz
Sensitivity
-35 ± 3dB @ 1KHz, @ 75dB SPL
Sensitivity
-55Hz ~ 14KHz
Max SPL @ 1% Distortion
130dB
Output Impedance
600W nominal
Impedance
600W nominal
Termination
3 PIN XLR detachable cable supplied
Phantom Powering
12 ~ 48v
Dimensions
190(H) x 50(max Ø) mm
Dimensions
80(W) x 20(H) x 105(D) mm
Weight
300g
Weight
150g
www.cie-group.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising