Argus4 Truck Storage Mount
safety and
innovation
Battery Charging Truck Mount
(P7030BCTM)
Truck Storage Mount (P7030TSM)
Argus® 4 Thermal Image Camera's can be supplied with
various storage and charging options for use in trucks and
other vechicles.
The Argus® 4 Truck Mounts are designed to provide secure
storage with instant access for Argus® 4 Thermal Imaging
Cameras with the option of battery charging.
The units are designed primarily for the storage of cameras
within a fire truck, but can be fitted to any flat surface. The
cameras fit securely into the storage mount and will hold
a camera with either the handle fitted or removed. The
cameras are removed by releasing the strap or pushing the
eject button.
The Battery Charging Truck Mount (P7030BCTM) will
charge the camera battery pack (see note) without the
need to remove the battery from the camera. The Battery
Charging Truck Mount is designed to allow a Truck Battery
Charger (P7030TBC) to be mounted on top, providing the
facility for charging a spare battery.
Both the Battery Charging Truck Mount and the Truck
Battery Charger have an LED to indicate the battery charge
status. The circuitry inside the unit will not overcharge the
battery and will maintain the battery at full charge at all
times. Charging can continue whether the vehicle is parked,
running or in normal operation.
To book a demonstration or find out more go to:
argusdirect.com
Truck Battery Charger (P7030TBC)
Product order codes
Code
P7030TSM
Truck Storage Mount
P7030TBC
Truck Battery Charger
P7030BCTM
Battery Charging Truck Mount
P7030TSMBC
Truck Storage Mount and Battery Charger
P7030BCTM/TBC
Battery Charging Truck Mount / Truck Battery
Charger
Please refer to the Argus website for details.
Warranty
The Argus® 4 Battery Charging Truck Mount is supplied with a oneyear warranty
A1A-P7030TSMBC Version 8, September 2013: 115193
Data Sheet
Technical Specification
Environmental data
Operating
Temperatures
Sealing
Storage
The integrated battery charger truck mount can
be operated in temperatures between:
0ºC (14ºF) and +40ºC (104ºF)
The battery charger is sealed to IP42
The integrated battery charger truck mount
can be stored for extended periods. It is
recommended ther for maximum effective
operational life, the storage temperature is kept
between -10ºC (32ºF) and +40ºC (104ºF)
Mechanical Data
Truck Storage Mount
Overal dimensions
(H x W x D)
Weight
Materials
156mm x 256mm x 165mm
(6.1 x 10.1 x 6.5 inches) (H x W xD)
1.1kg (2.4lb) nominal
Storage mount outer - Aluminium painted black
Storage mount inner - Black LD45 foam.
Truck Battery Charger
Overal dimensions
(H x W x D)
Weight
Materials
50mm x 160mm x 165mm
(2 x 6.3 x 6.5 inches) (H x W xD)
0.7kg (1.5lb) nominal
UL94 V0 plastic
Battery charging truck mount
Overal dimensions
(H x W x D)
Weight
Materials
160mm x 256mm x 210mm
(6.1 x 10.1 x 8.25 inches) (H x W xD)
2.1kg (4.5lb) nominal
Aluminium painted black
Electrical Data
Charger
Charging time
Input Voltage
2 hours
10 -30 V DC (12 and 24 V vehicle supplies)
Compliance data
RFI / EMC
Safety
Vibration/Shock
RoHS
Vehicle standard - 2004/104/EC (see note) Note: This device is not immunity related and
must not be used to an aid to control of the
vehicle.
IEC 60950-1 and related national standards
BS EN 60721-3-2 Class 2M3 (transportation)
NFPA 1901 14.1.11.2 (rollover / crash test)
All parts of the system are RoHS Compliant as
per EU directive 2011/65/EC
Note:
The Battery Charging Mount (P7030BCTM) requires the use of a
compatible battery pack that has been introduced across the Argus®4
camera range. These batteries have three contact pins on the top
surface. If your camera was not supplied with these batteries, they must
be ordered separately (product code P7030R).
Whilst e2v technologies has taken care to ensure the accuracy of the information contained herein
it accepts no responsibility for the consequences of any use thereof and also reserves the right to
change the specification of goods without notice. e2v technologies accepts no liability beyond the
set out in its standard conditions of sale in respect of infringement of third party patents arising from
the use of tubes or other devices in accordance with information contained herein.
e2v technologies (uk) limited, Waterhouse Lane, Chelmsford, Essex CM1 2QU United Kingdom
Holding Company: e2v technologies plc Telephone: +44 (0)1245 493493 Facsimile:
+44 (0)1245 492492 Contact e2v by e-mail: enquiries@e2v.com or visit www.e2v.com
for global sales and operations centres. © e2v technologies (uk) limited 2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising