Connect the PoE hub/injector to the power supply Connect

Connect the PoE hub/injector to the power supply Connect
by Panasonic
QUICK START GUIDE
just follow these simple steps!
Make sure you have the following ready:
The box contains:
Not included, but needed during installation:
• WV-SF438 360° camera
•PoE hub/injector that is compliant with IEEE802.3af standard.
Available at your business partner;
• Installation template label
•Ethernet cable, which connects the camera to the
PoE hub/injector;
• Camera attachment ring
•Second Ethernet cable, which connects the PoE hub/injector
with the router;
• Four M4 screws and plugs.
Connect and activate Cameramanager 360° by automatic installation
Note: When you use auto-install as installation method, it is not possible to use a SD card as storage location.
If the customer wishes to use Cameramanager 360° with a SD card, install the camera manually.
For customers in Belgium, automatic installation is only possible if the provider has enabled automatic
Port Forwarding (UPnP) on the modem.
1
2
3
4
Connect the PoE hub/injector to the power supply
Connect the power supply to the PoE hub/injector with the supplied power adaptor.
Connect the camera to PoE hub/injector
The camera is connected to the power supply by Power over Ethernet (PoE). Connect
the camera to the PoE hub/injector by inserting the end of the supplied Ethernet cable
into the LAN/Ethernet port of the camera. Insert the other end of the cable into the
LAN/Ethernet port of the PoE hub/injector.
Connect the PoE hub/injector with the router
Connect the PoE hub/injector with the router by inserting one end of the supplied
Ethernet cable into the LAN/Ethernet port of the router. Insert the other end into the
LAN/Ethernet port of the PoE hub/injector.
Install the application
On a computer go to www.cameramanager.com/download. Download and open
the installation program for Windows, Mac, or Linux. After opening the installation
program, follow the instructions on the screen.
If the customer does not want/cannot install the application,
use the online Java application.
by Panasonic
5
6
Start the application
For Windows: click on the Start Menu, click ‘All programs’ and select
‘Cameramanager’. For Mac: go to ‘Programs’ and open ‘Cameramanager’. Once
opened, fill in the login information of the customer in the pop-up screen.
You have received/can obtain the login information from your business partner.
Click ‘Start’ to start the application.
Adding a camera to the application
After starting the application you will see the main screen. The installation
wizard will open automatically when you add a camera for the first time.
Click ´Add new camera´ in the bottom left corner if the wizard does not start
automatically. Add the camera by clicking ‘Auto-connect’. The camera will now
be installed automatically. After installing, name the camera and select the
video mode in which the customer would like to view and record footage.
After adding the camera to the application, mount the camera on the
wall or ceiling for the customer.
7
Configure motion detection, email and
push notifications
8
Download Cameramanager apps for
smartphone and tablet
For an explanation of this, see section 4.7 of the manual.
The customer can also use Cameramanager on their smartphone or tablet, which
allows them to manage the cameras and view videos while on the move. You can
download these apps from the Google Play Store and Apple App Store.
Android
iOS
Do you have any questions regarding the installation of the camera and using
the Cameramanager application? Please contact your business partner.
by Panasonic
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising