COM Express® PMC/XMC Lite Carrier
COM Express Type 6 Rugged Ultra-Lite
Carrier
Connect Tech Inc.
42 Arrow Road
Guelph, Ontario
N1K 1S6
www.connecttech.com
CTIM-00440 Revision 0.02 2016-11-28
Tel: 519-836-1291
Toll: 800-426-8979 (North America only)
Fax: 519-836-4878
Email: sales@connecttech.com
support@connecttech.com
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Table of Contents
Table of Contents ................................................................................................................................... 2
Preface................................................................................................................................................... 4
Disclaimer .......................................................................................................................................................4
Customer Support Overview ...........................................................................................................................4
Contact Information ........................................................................................................................................4
Limited Product Warranty ............................................................................................................................... 5
Copyright Notice .............................................................................................................................................5
Trademark Acknowledgment ..........................................................................................................................5
ESD Warning ..................................................................................................................................................6
Revision History .................................................................................................................................... 6
Introduction........................................................................................................................................... 7
Product Features and Specifications ................................................................................................................7
Part Numbers / Ordering Information .............................................................................................................7
Product Overview .................................................................................................................................. 8
Block Diagram ................................................................................................................................................8
Connector Summary ........................................................................................................................................9
Jumper Summary.............................................................................................................................................9
Detailed Feature Pinouts and Functional Descriptions ......................................................................... 10
Serial/GPIO ................................................................................................................................................... 10
J7 Jumper – GPIO-V .......................................................................................................................... 10
VGA Video ................................................................................................................................................... 11
COM Express Module ................................................................................................................................... 11
LVDS Video .................................................................................................................................................. 12
J1 Jumper – LVDS PANEL ................................................................................................................ 12
miniPCIe/mSATA Slots ................................................................................................................................ 13
Dual Function miniPCIe/mSATA Slots ............................................................................................. 13
J4A,J4 Jumper – mSATA/miniPCIe ................................................................................................... 13
Half and Full Length miniPCIe/mSATA module Installation ............................................................ 14
SIM Socket ......................................................................................................................................... 15
External SATA .............................................................................................................................................. 16
CPU Fan ........................................................................................................................................................ 17
System and Miscellaneous Connector ........................................................................................................... 18
HD Audio Connector .................................................................................................................................... 19
Software Support for the CS4207 ....................................................................................................... 19
USB 2.0 Connector ....................................................................................................................................... 19
DisplayPort Connector .................................................................................................................................. 20
DisplayPort-HDMI/DVI Switching .................................................................................................... 20
10/100/1000 Ethernet (GBE) ......................................................................................................................... 21
USB 3.0/2.0 Connector ................................................................................................................................. 21
microSD CARD Connector ........................................................................................................................... 22
J8 Jumper – USB ................................................................................................................................ 22
Input Power and Control .............................................................................................................................. 23
J6 Jumper – Shutdown ........................................................................................................................ 23
J6 Jumper – Power Control................................................................................................................. 23
RTC Battery .................................................................................................................................................. 24
Document: CTIM-00440
Revision: 0.02
Page 2 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
J2 Jumper – RTC Battery ................................................................................................................... 24
J3 Jumper – RTC Battery ................................................................................................................... 24
XMC 25
PMC 26
Typical Hardware Installation Procedure ............................................................................................ 27
On-board Indicator LEDs .............................................................................................................................. 27
Thermal Details ................................................................................................................................... 28
Mechanical Details ............................................................................................................................... 28
Cables and Cable Kit Information ....................................................................................................... 29
Cable Kits ...................................................................................................................................................... 29
CKG028 – “Full” Cable Kit ............................................................................................................... 29
CKG021 – “Starter” Cable Kit ........................................................................................................... 29
Additional Available Cables ............................................................................................................... 29
Detailed Cable Information ........................................................................................................................... 30
CBG090 - SATA HDD Signal and Power Cable ............................................................................... 30
CBG120 - VGA to 10-Pin Minitek Cable .......................................................................................... 31
CBG121 - Dual DB-9 to 20-Pin Minitek Cable.................................................................................. 32
CBG104 - Dual USB 2.0 panel mount to 8-pin MiniTek Cable ......................................................... 33
CBG113 - DisplayPort++ panel mount to 20-pin MiniTek Cable ...................................................... 34
CBG145 – HDMI Female to 20-Pin Minitek Cable ........................................................................... 35
CBG117 - RJ-45 panel mount to 10-pin MiniTek Cable .................................................................... 36
CBG118 - Dual 3.5mm Stereo Audio panel mount to 8-pin MiniTek w/Latch.................................. 37
System Cable - Unterminated wires to 20-pin MiniTek w/Latch - CBG116...................................... 38
CBG131 - Dual USB 3.0 to 20-Pin Cable .......................................................................................... 39
Document: CTIM-00440
Revision: 0.02
Page 3 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Preface
Disclaimer
The information contained within this user’s guide, including but not limited to any product specification, is
subject to change without notice.
Connect Tech assumes no liability for any damages incurred directly or indirectly from any technical or
typographical errors or omissions contained herein or for discrepancies between the product and the user’s
guide.
Customer Support Overview
If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech
reseller from which you purchased the product. In most cases the reseller can help you with product
installation and difficulties.
In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist
you. Our support section is available 24 hours a day, 7 days a week on our website at:
www.connecttech.com/sub/support/support.asp. See the contact information section below for more
information on how to contact us directly. Our technical support is always free.
Contact Information
Mail/Courier
Connect Tech Inc.
Technical Support
42 Arrow Road
Guelph, Ontario
Canada N1K 1S6
Email/Internet
sales@connecttech.com
support@connecttech.com
www.connecttech.com
Note:
Please go to the Download Zone or the Knowledge Database in the Support Center on the Connect Tech
website for product manuals, installation guides, device driver software and technical tips.
Submit your technical support questions to our customer support engineers via the Support Center on the
Connect Tech website.
Telephone/Facsimile
Technical Support representatives are ready to answer your call Monday through Friday, from 8:30 a.m. to
5:00 p.m. Eastern Standard Time. Our numbers for calls are:
Toll Free: 800-426-8979 (North America only)
Telephone: 519-836-1291 (Live assistance available 8:30 a.m. to 5:00 p.m. EST,
Monday to Friday)
Facsimile: 519-836-4878 (on-line 24 hours)
Document: CTIM-00440
Revision: 0.02
Page 4 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Limited Product Warranty
Connect Tech Inc. provides a two-year Warranty for the COM Express® PMC/XMC Lite Carrier. Should
this product, in Connect Tech Inc.'s opinion, fail to be in good working order during the warranty period,
Connect Tech Inc. will, at its option, repair or replace this product at no charge, provided that the product
has not been subjected to abuse, misuse, accident, disaster or non-Connect Tech Inc. authorized
modification or repair.
You may obtain warranty service by delivering this product to an authorized Connect Tech Inc. business
partner or to Connect Tech Inc. along with proof of purchase. Product returned to Connect Tech Inc. must
be pre-authorized by Connect Tech Inc. with an RMA (Return Material Authorization) number marked on
the outside of the package and sent prepaid, insured and packaged for safe shipment. Connect Tech Inc.
will return this product by prepaid ground shipment service.
The Connect Tech Inc. Limited Warranty is only valid over the serviceable life of the product. This is
defined as the period during which all components are available. Should the product prove to be
irreparable, Connect Tech Inc. reserves the right to substitute an equivalent product if available or to retract
the Warranty if no replacement is available.
The above warranty is the only warranty authorized by Connect Tech Inc. Under no circumstances will
Connect Tech Inc. be liable in any way for any damages, including any lost profits, lost savings or other
incidental or consequential damages arising out of the use of, or inability to use, such product.
Copyright Notice
The information contained in this document is subject to change without notice. Connect Tech Inc. shall
not be liable for errors contained herein or for incidental consequential damages in connection with the
furnishing, performance, or use of this material. This document contains proprietary information that is
protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced,
or translated to another language without the prior written consent of Connect Tech, Inc.
Copyright  2016 by Connect Tech, Inc.
Trademark Acknowledgment
Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in this
document as the property of their respective owners. Not listing all possible trademarks or copyright
acknowledgments does not constitute a lack of acknowledgment to the rightful owners of the trademarks
and copyrights mentioned in this document.
Document: CTIM-00440
Revision: 0.02
Page 5 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
ESD Warning
Electronic components and circuits are sensitive to
ElectroStatic Discharge (ESD). When handling any circuit
board assemblies including Connect Tech COM Express
carrier assemblies, it is recommended that ESD safety
precautions be observed. ESD safe best practices include,
but are not limited to:





Leaving circuit boards in their antistatic packaging
until they are ready to be installed.
Using a grounded wrist strap when handling circuit
boards, at a minimum you should touch a grounded
metal object to dissipate any static charge that may be
present on you.
Only handling circuit boards in ESD safe areas, which
may include ESD floor and table mats, wrist strap
stations and ESD safe lab coats.
Avoiding handling circuit boards in carpeted areas.
Try to handle the board by the edges, avoiding contact
with components.
Revision History
Revision
Date
Changes
0.00
2015-04-02
Original
0.01
2016-06-07
Revised Warranty Policy
0.02
2016-11-28
Update format, jumpers information place in respective feature
section. Added RTC battery information.
Document: CTIM-00440
Revision: 0.02
Page 6 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Introduction
Connect Tech’s PMC/XMC Lite Carrier is an extremely small carrier board featuring rugged, locking
connectors and offers the ultimate durability. The PMC/XMC Lite Carrier is ideal for space constrained
applications, harsh environments, demanding conditions and supports extended temperature ranges of 40°C to +85°C.
Product Features and Specifications
Specifications
COM Express Compatibility
COM Express® Type 6 (PCIMG COM Express® COM.0 R2.1)
MiniPCIe Expansion / mSATA
(Switchable)
2 slots (with PCIe, USB and SATA connections)
2 mSATA slots (capable of SATA III)
PMC Expansion
2 PMC (PCI) Expansion ports for additional I/O expansion
XMC Expansion
2 x8 lane XMC (PCIe) Expansion ports for additional I/O expansion
DisplayPort++
2 outputs from COM Express (Can be used for HDMI, DVI or VGA)
VGA Video
1 Analog CRT VGA Port
LVDS Video
18-24-bit LVDS
Gigabit Ethernet
2 x 10/100/1000 Ethernet Ports
USB 2.0
2 USB 2.0 Ports
USB 3.0
4 USB 3.0 Ports (Can also function as USB 2.0 ports)
HD Audio
1 stereo input, 1 stereo output
RS-232
1 COM Express console port
GPIO
8 -bits (Buffered 4in/4out, +3.3V or +5V selectable)
Ext SATA
2 external SATA connectors (capable of SATA III)
SD Card
1 micro SD Card slot (from USB Host controller, with bootable option)
System Interfaces
I2C, SMBus, S3 Power Level Output, Reset Output
I/O Connector Type
Rugged Locking Positive Latching 2mm Pitch Connectors
Input Power
Single wide input rage +12V to +48V DC
RTC Battery
On-board 3V 48mAh (BR1125A )
Option to connect external RTC battery.
Dimensions
190mm x 195mm
Download 3D Model Here (28MB)
Weight
254g
Operating Temperature Range
-40°C to +85°C
Part Numbers / Ordering Information
Part Number
CCG016
Document: CTIM-00440
Revision: 0.02
Standard Model
Page 7 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Product Overview
Block Diagram
12V/5VSB
+12V to +48V
Input
On-Carrier ATX
Compliant Power Supply
HDA
Audio
Input / Output
HD Audio Codec
Cirrus Logic CS4207
DDI-1
DisplayPort/HDMI 0
DDI-2
DisplayPort/HDMI 1
10/100/1000
Ethernet Port-0
GBE
PCIe x1
GBE Controller
Intel 82574L
GBE
PCIe x8
XMC 0
PCIe x8
PCIe x1
10/100/1000
Ethernet Port-1
XMC 1
PMC 0
PCI Bridge
PLX 8112
PMC 1
USB 3.0/2.0 Port-0
USB 3.0/2.0 Port-1
COM Express Type-6
CPU Module
USB 3.0/2.0 Port-2
USB 3.0/2.0 Port-3
1 x RS-232
USB 2.0 Port 0
USB 2.0 Port 1
VGA
LVDS
TX0/RX0
GPIO / RS-232
Console Port
GPIO
USB
USB-to-SDIO
Host Controller
Microchip USB2244I
SDIO
SATA0
SD Card
SATA0
Ind.SATA NAND
(optional)
SATA1
SATA1
PCIe x1
SATA2
USB
mSATA/mini PCIe
Slot-0
PCIe x1
SATA3
USB
Document: CTIM-00440
Revision: 0.02
Page 8 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
mSATA/mini PCIe
Slot-1
SIM Card
Socket
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Connector Summary
Designator
Description
Connector
J15A
XMC 0
XMC connector (x8 PCIe)
J15B
XMC 1
XMC connector (x8 PCIe)
J11A/J12A
PMC 0
PMC connector (PCI Bus)
J11B/J12B
PMC 1
PMC connector (PCI Bus)
P13
SERIAL/GPIO
RS-232 Serial Port with GPIO
P19
VGA
VGA Display Connector
P1
COM Express
COM Express Type 6 Connector
P6
LVDS
LVDS Display Connector
P7A
miniPCIe/mSATA 0
miniPCIe/mSATA Slot 0
P7B
miniPCIe/mSATA 1
miniPCIe/mSATA Slot 1
P14A
EXT SATA 0
External SATA Plug 0
P14B
EXT SATA 1
External SATA Plug 1
P16
CPU FAN
CPU Fan Connector
P17
SYSTEM/MISC
System Header Connector
P15
SIM CARD
SIM Card Connector (Connects to P7A)
P5
AUDIO
HD Audio Connector
P2
USB PORT 6-7
USB 2.0 Ports 6 and 7
P4A
GBE 0
Gigabit Ethernet 0
P4B
GBE 1
Gigabit Ethernet 0
P18A
USB2.0/3.0 Ports 0-1
USB 2.0 and USB 3.0 Ports 0 and 1
P18B
USB2.0/3.0 Ports 2-3
USB 2.0 and USB 3.0 Ports 2 and 3
P3A
DP/HDMI 0
COM Express DisplayPort 0
P3B
DP/HDMI 1
COM Express DisplayPort 1
P20
SD CARD
microSD Card Connector
P11/P12
Power Output (+12V,+5V)
Power output for SATA and/or LVDS
P10
PWR
Vertical Screw Terminal Power Connector
Jumper Summary
Designator
Jumper
Description
J1
LVDS PANEL
selection for the LVDS PANEL VCC (Can be +3.3V, +5V or +12V)
J2
BAT
selection for on-board RTC battery or external RTC battery
J3
RTC
selection to Enable RTC battery or Clear
J4
mSATA/miniPCIe
selection for either MiniPCIe or mSATA
J5
Power Control
selection for Power Good signal, or +3.3V Stand By override
J6
Shutdown Control
COM Express shutdown functionality enable/disable.
J7
GPIO-V
selection for the GPIO VCC (Can be +3.3V or +5V)
J8
USB
selection for USB 2.0 Port 7. Used to select Client USB or SD Card.
Document: CTIM-00440
Revision: 0.02
Page 9 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Detailed Feature Pinouts and Functional Descriptions
Serial/GPIO
The CCG016 allows access to the COM Express modules GPIO by routing them out to a GPIO header. Also
present is a direct connected RS-232 signal that utilizes the COM Express module’s UART.
Function RS-232 Serial and GPIO
Location P13
Type
FCI Minitek Double Row 10 x 2
P/N
98424-G06-20LF
Cable
CBG121
Pinout
Pin
1
3
5
7
9
11
13
15
17
19
Description
GPI0
GPI1
GPI2
GPI3
GND
RS-232 RX
RS-232 TX
GND
Pin
2
4
6
8
10
12
14
16
18
20
Description
GPO3
GPO2
GPO1
GPO0
-
J7 Jumper – GPIO-V
Function
GPIO Power
Location
J7
Modes
Position
+5V
+3.3V
Document: CTIM-00440
Revision: 0.02
Description
GPIO +5V
GPIO +3.3V
Page 10 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
VGA Video
To allow for greater flexibility, the CCG016 provides a VGA Video output. Routed directly from the COM
Express Type 6, this provides additional video output formats for operation.
Function VGA Video
Location P19
Type
FCI Minitek Double Row 5 x 2
P/N
98424-G52-10LF
Cable
CBG120
Pinout
Pin
1
3
5
7
9
Description
DAC RED
DAC GREEN
DAC BLUE
HSYNC
VSYNC
Pin
2
4
6
8
10
Description
GND
SC DDC
SD DDC
GND
COM Express Module
The processor and chipset are implemented on the CCG016s COM Express Type 6 module, which connects to
the CCG016 Carrier Board via a Tyco fine pitch stacking connector.
Function
COM Express interface
Location
P1
Type
TE Connectivity Board to Board Connector
Carrier
3-6318491-6
Connector Manufacturer: TE Connectivity
P/N
Mating
3-1827231-6
Connector Manufacturer: TE Connectivity
P/N
Pinout
Refer to COM Express R2.0 specification,
Type-6
Document: CTIM-00440
Revision: 0.02
Page 11 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
LVDS Video
The CCG016 provides dual 18 or 24 bit LVDS display channels via P9, which are connected directly from the
COM Express Type 6 module.
The external SATA power connectors can also be used to provide power to LVDS screen.
Function LVDS Video
Location P6
Type
Hirose Low Profile Board to Cable Connector
P/N
DF20G-40DP-1V(56)
Pinout
Pin
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
Description
LVDS B0LVDS B0+
GND
LVDS B1LVDS B1+
GND
LVDS B2LVDS B+
GND
LVDS B CLKLVDS B CLK+
GND
LVDS B3LVDS B3+
GND
GND
LVDS PPEN
LVDS BLT CTRL
LVDS BLEN
Pin
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Description
[1]
PANEL VCC
[1]
PANEL VCC
GND
GND
LVDS A0LVDS A0+
GND
LVDS A1LVDS A1+
GND
LVDS A2LVDS A+
GND
LVDS A CLKLVDS A CLK+
GND
LVDS A3LVDS A3+
LVDS BLC CLK
LVDS BLC DAT
Note [1]: This voltage can be selected from Jumper J2 to be +3.3V, +5V, or +12V
J1 Jumper – LVDS PANEL
Function
LVDS PANEL Power
Location
J2
Modes
Position
+12V
+5V
+3.3V
Document: CTIM-00440
Revision: 0.02
Description
LVDS PANEL Power +12V
LVDS PANEL Power +5V
LVDS PANEL Power +3.3V
Page 12 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
miniPCIe/mSATA Slots
Dual Function miniPCIe/mSATA Slots
The CCG016 has two special dual purpose miniPCIe/mSATA slots. Each of these slots can accept either a
miniPCIe module or an mSATA SSD module. These slots have special circuitry that allows for the selection
between connecting PCIe lanes or SATA lanes.
Each of these slots are also provided with a USB 2.0 in addition to the PCIe as per the mini PCIe specification,
see below for a block diagram of the slots functionality.
miniPCIe/mSATA Dual Functionality Diagram*
*Please note, a SIM card is only availabe on miniPCIe/mSATA slot 0
J4A,J4 Jumper – mSATA/miniPCIe
Jumper Location
Jumper ON
Jumper OFF
J4A
Slot 0 miniPCIe
Slot 0 mSATA
J4B
Slot 1 miniPCIe
Slot 1 mSATA
Function mSATA/miniPCIe Switching
[11]
Location J4
Modes
Position
A
B
Description
Slot 0 (ON – MiniPCIe)
Slot 1 (ON – MiniPCIe)
Note [11]: See mSATA/miniPCIe Slots for detailed description of functionality
Document: CTIM-00440
Revision: 0.02
Page 13 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Half and Full Length miniPCIe/mSATA module Installation
The CCG016 comes with dual mounting solutions to allow for the population of a half and a full length
module. If you would prefer to have a single slot or both slots populated with half-length hardware at the time
of your production order please contact sales@connecttech.com for further details.
Function
miniPCIe/mSATA Slots
Location
P7A, P7B
Type
Molex Edge Card Connector
P/N
0679105700
Pinout
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Document: CTIM-00440
Revision: 0.02
miniPCIe
Description
+3.3V
GND
+1.5V
CLKREQ#
UIM_PWR
GND
UIM_DATA
PCIe CLK+
UIM_CLK
PCIe CLKUIM_RESET
GND
UIM_VPP
GND
W_DISABLE#
RESV
PCIe RX+
+3.3V
PCIe RXGND
GND
mSATA Description
+3.3V
GND
+1.5V
GND
GND
GND
RESV
SATA TX+
+3.3V
SATA TXGND
GND
Page 14 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
+1.5V
GND
SMB_CLK
PCIe TXSMB_DATA
PCIe TX+
GND
GND
USB DGND
USB D+
+3.3V
GND
+3.3V
RESV
+1.5V
GND
+3.3V
+1.5V
GND
SATA RXSATA RX+
GND
GND
GND
+3.3V
GND
+3.3V
RESV
+1.5V
GND
+3.3V
SIM Socket
Function
SIM Socket
Location
P15
Type
Molex Push-Push SIM Card Connector
P/N
0475530001
Pinout
Pin
1
2
3
4
5
6
7
8
9
Document: CTIM-00440
Revision: 0.02
Description
UIM_PWR
UIM_RST
UIM_CLK
GND
UIM_VPP
UIM_DATA
SHELL
SHELL
Page 15 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
External SATA
The CCG016 provides two SATA plugs that are SATA-PCIe/104 switched. Please see
SATA-PCIe/104 switching description for additional details.
The CCG016 also provides power for external SATA Hard Drives and/or LVDS screens. The power
connectors can be found next the External SATA connectors.
Function
SATA
Location
P14A, P14B
Type
Molex Vertical Serial ATA Plug
P/N
0471554001
Cable
CBG090
Pinout
Pin
1
2
3
4
5
6
7
Description
GND
TX+
TXGND
RXRX+
GND
Function
SATA Power
Location
P11,P12, P21
Type
XH Low Profile Crimp Connector
P/N
B4B-XH-AM(LF)(SN)(P)
Cable
CBG090
Pinout
Pin
1
2
3
4
Document: CTIM-00440
Revision: 0.02
Description
GND
+5V
GND
+12V
Page 16 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
CPU Fan
Function
CPU Fan
Location
P16
Type
Molex Solid Header with Friction Lock
P/N
22232031
Cable
Pinout
Pin
1
2
3
Document: CTIM-00440
Revision: 0.02
Description
TACH
+VCC
GND
Page 17 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
System and Miscellaneous Connector
The System header can be used to connect the power button, reset button, and LED’s required to monitor the
module performance or state.
Function
System Controls
Location
P17
Type
FCI Minitek Double Row 10 x 2
P/N
98414-G06-20LF
Cable
CBG116
Pinout
Pin
1
3
5
7
9
11
13
15
17
19
Document: CTIM-00440
Revision: 0.02
Description
+5V
RTC BAT EXT
SYS RESET#
PWRBTN#
BATLOW#
EXT S3#
I2C CLK
I2C DAT
+5V
Pin
2
4
6
8
10
12
14
16
18
20
Description
SPEAKER+5V SB
GND
GND
GND
GND
SMB DAT
CMB CLK
SMB ALERT#
-
Page 18 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
HD Audio Connector
The CCG016s features HD Audio capabilities with the assistance of the Cirrus Logic CS4207 Codec device.
From the codec, 1 microphone input and 1 headphone output are available.
Function
HD Audio
Location
P5
Type
FCI Minitek Double Row 4 x 2
P/N
98414-G06-08LF
Cable
CBG118
Pinout
Pin
1
3
5
7
Description
MIC IN R
GND
HP OUT R
Pin
2
4
6
8
Description
MIC IN L
GND
HP OUT L
Software Support for the CS4207
The audio codec used on the Qseven Gen 2.0 carrier board is the CS4207 from Cirrus Logic.
Additional drivers will be needed to properly operate audio on the Qseven Gen 2.0 carrier. Some downloadable
links can be found below.
Windows XP Driver: http://www.cirrus.com/en/pubs/software/CS4207_WinXP_1-0-0-38.zip
Windows 7/Vista Driver: http://www.cirrus.com/en/pubs/software/CS4207_WinVista_Win7_32-64-bit_66001-1-30.zip
Linux Driver: Included in kernels 2.6.30 and up.
USB 2.0 Connector
The CCG016 has multiple USB Ports. USB 2.0 Port 6 is sourced directly from the COM Express module. USB
2.0 Port 7 however has multiple functionality options. Using Jumper J727, Port 7 can either be a Client USB,
or it can be used to connect the SD Card to the COM Express module.
Function
USB 2.0 Ports 6 and 7
Location
P2
Type
FCI Minitek Double Row 4 x 2
P/N
98414-G06-08LF
Cable
CBG104
Pinout
Pin
1
3
5
7
Description
PORT 6 - VBUS
PORT 6 – DPORT 6 – D+
PORT 6 – GND
Pin
2
4
6
8
Description
[2]
PORT 7 – VBUS
[3]
PORT 7 – D[3]
PORT 7 – D+
PORT 7 – GND
Note [2]: USB 2.0 Port 7 can be optionally be used as client USB. Simply remove the Jumper from J8A to enable
Note [3]: USB 2.0 Port 7 can be optionally be used to enable the SD Card. Simply remove the Jumper from J8B to enable
Document: CTIM-00440
Revision: 0.02
Page 19 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
DisplayPort Connector
Two DisplayPort++ connections from the COM Express module are available and can be configured to output
DisplayPort, or HDMI/DVI through the use of the appropriate cable. The configuration of each interface is
setup via the COM Express module’s BIOS settings. Refer to the COM Express module’s documentation for
more details.
Function
DisplayPort Connector
Location
P3A,P3B
Type
FCI Minitek Double Row 10 x 2
P/N
98414-G06-20LF
Mating
10073599-020LF
Cable
CBG113
Pinout
Pin
1
3
5
7
9
11
13
15
17
19
Description
DP0+
DP0GND
DP1+
DP1GND
DP2+
DP2GND
DP Power
Pin
2
4
6
8
10
12
14
16
18
20
Description
DP3+
DP3GND
DPAUXDPAUX+
GND
DP Hot Plug Detect
GND
GND
DP AUX SEL[4]
Note [4]: Cable assembly must tie high (+3.3V) for adapter output (HDMI/DVI/VGA) and low (GND) for DisplayPort output
DisplayPort-HDMI/DVI Switching
The CCG016 DisplayPort++ connectors can be used to display outputs other than DisplayPort.
On-board switching circuitry to enable HDMI or DVI has been included. The CCG016 COM Express
DisplayPort Connectors may require a change to the COM Express BIOS to swap output formats.
Function
DisplayPort Connector (HDMI/DVI Output)
Location
P3A,P3B
Type
FCI Minitek Double Row 10 x 2
P/N
98414-G06-20LF
Mating
10073599-020LF
Cable
CBG145
Pinout
Pin
1
3
5
7
9
11
13
15
17
19
Description
TMDS2+
TMDS2GND
TMDS1+
TMDS1GND
TMDS0+
TMDSGND
+3.3V
Pin
2
4
6
8
10
12
14
16
18
20
Description
TMDS CLK+
TMDS CLKGND
DDC DATA
DDC CLK
GND
Hot Plug Detect
GND
GND
DP/TMDS SEL[5]
Note [5]: Cable assembly must tie high (+3.3V) for HDMI/DVI output
Document: CTIM-00440
Revision: 0.02
Page 20 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
10/100/1000 Ethernet (GBE)
The CCG016 features dual 10/100/1000 Ethernet Ports. GBE 0 is sourced from the COM Express module.
Meanwhile, GBE 1 is sourced from an Intel 82574 PCIe PHY Controller located on the CCG016 Carrier
Board, connected via PCIe x1 to the COM Express module.
Function
Gigabit Ethernet Connector
Location
P4A, P4B
Type
FCI Minitek Double Row 5 x 2
P/N
98414-G52-10LF
Cable
CBG117
Pinout
Pin
1
3
5
7
9
Description
MX0MX1SHELL
MX2MX3-
Pin
2
4
6
8
10
Description
MX0+
MX1+
SHELL
MX2+
MX3+
USB 3.0/2.0 Connector
The CCG016 provides up to a maximum of 4 USB 3.0 Ports. The USB 3.0 signals are sourced directly from
the COM Express Type 6 module, and run through a Pericom Semiconductor PI3EQX7502AIZDE re-driver.
Over current protection, power supply filtering and ESD protection is provided.
Function
USB
Location
P18A, P18B
Type
Lotes Co. Ltd Double Row 10 x 2
P/N
ABA-USB-152-K01
Cable
CBG131
Pinout
Pin
1
2
3
4
5
6
7
8
9
10
Document: CTIM-00440
Revision: 0.02
Description
Port A - VBUS
Port A - SSRXPort A - SSRX+
GND
Port A - SSTXPort A - SSTX+
GND
Port A - DPort A - D+
-
Pin
20
19
18
17
16
15
14
13
12
11
Description
Port B - VBUS
Port B - SSRXPort B - SSRX+
GND
Port B - SSTXPort B - SSTX+
GND
Port B - DPort B - D+
Page 21 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
microSD CARD Connector
The CCG016 provides a microSD Card Slot. This microSD can be accessed by the COM Express module over
USB 2.0 Port 7[9].
Function microSD Card
[9]
Location P20
Type
Molex microSD Memory Card Connector
P/N
5025700893
Pinout
Pin
Description
1
2
3
4
5
6
7
8
9
10
SD_D2
SD_D3
SD_CMD
SD_VDD
SD_CLK
GND
SD_D0
SD_D1
GND
SD_CD#
COM Express GPIO
Mapping
GPI2
GPI3
GPO1
GPO0
GPI0
GPI1
GPO3
Note [9]: USB 2.0 Port 7 can be optionally be used to enable the SD Card. Simply remove the Jumper from J8B to enable
J8 Jumper – USB
Function USB 2.0 Port 7 Switching
Location J8
Modes
Position
A
B
Document: CTIM-00440
Revision: 0.02
Description
Client USB (ON – Client Disabled)
SD Card (ON – SD Disabled)
Page 22 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Input Power and Control
The CCG016 accepts a single power input to power all on-board devices. The CCG016 accepts a wide input
range of +12V to +48V for operation.
Function Power
Location P10
Type
FCI Pluggable Terminal Block
P/N
20020108-G041A01LF
Pinout
Pin
1
2
3
4
Description
VIN
VIN
GND
GND
J6 Jumper – Shutdown
Function
RTC Battery Clear/Enable
Location
J6
Modes
Position
ON
OFF
Description
Enable COM Express Shutdown
Functionality
Disable COM Express
Shutdown Functionality
J6 Jumper – Power Control
Function
Power Control
Location
J6
Modes
Position
+3SB
PG
Document: CTIM-00440
Revision: 0.02
Description
+3.3V Stand By Connected to
PWR_OK
PGOOD Connected to
PWR_OK
Page 23 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
RTC Battery
This carrier has a Panasonic BR1225A/FA Lithium battery providing 3V@ 48mAh to VBAT. VBAT is the
supply for the RTC Clock of the COM Express module.
If the BR1225A is not sufficient for the application, an external battery can be connected to P17 with J2
selection jumper set appropriately.
For further information about RTC battery selection and life time estimation, see Application Note 00009
CTIN-00009 http://connecttech.com/pdf/CTIN-00009.pdf
Note: the battery ships with a non-conductive label to prevent accidental discharge. It can be removed before
installation.
J2 Jumper – RTC Battery
Function
RTC Battery Selection
Location
J2
Modes
Position
EXT
LOC
Description
External RTC Battery
On-Board RTC Battery
J3 Jumper – RTC Battery
Function
RTC Battery Clear/Enable
Location
J3
Modes
Position
CLR
EN
Document: CTIM-00440
Revision: 0.02
Description
Clear RTC
Enable RTC
Page 24 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
XMC
The CCG016 allows for I/O expansion with two XMC slots, both capable of x8 PCI Express connectivity. The
XMC connectors comply with the VITA 42.0/42.3 standard. +VPWR is +5V, with an option to move to +12V
+VPWR power.
Function
XMC
Location
J15A, J15B
Type
Samtec XMC connector
P/N
ASP-103612-04
Pinout
A
B
C
D
E
F
1
2
3
4
5
6
7
8
9
10
11
PET0p0
GND
PET0p2
GND
PET0p4
GND
PET0p6
GND
NC
GND
PER0p0
PET0n0
GND
PET0n2
GND
PET0n4
GND
PET0n6
GND
NC
GND
PER0n0
PET0p1
GND
PET0p3
GND
PET0p5
GND
PET0p7
GND
NC
GND
PER0p1
PET0n1
GND
PET0n3
GND
PET0n5
GND
PET0n7
GND
NC
GND
PER0n1
VPWR
MRSTI#
VPWR
MRSTO#
VPWR
+12V
VPWR
NC
VPWR
GA0
VPWR
12
13
GND
PER0p2
GND
PER0n2
GND
PER0p3
GND
PER0n3
MPRESENT#
VPWR
14
15
16
GND
PER0p4
GND
GND
PER0n4
GND
GND
PER0p5
GND
GND
PER0n5
GND
MSDA
VPWR
MSCL
17
18
19
PER0p6
GND
REFCLK+0
PER0n6
GND
REFCLK0
3.3V
NC
3.3V
NC
3.3V
NC
3.3V
NC
NC
NC
MBIST#
(PU)
GA1
3.3V
AUX
GA2
NC
MVMRO
(PD)
NC
NC
NC
PER0p7
GND
NC
PER0n7
GND
NC
NC
NC
NC
**GA0/GA1/GA2 is 000 for J15A and 001 for J15B
Document: CTIM-00440
Revision: 0.02
Page 25 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
PMC
The CCG016 allows for I/O expansion with two PMC slots, both capable of 32bit PCI connectivity. The PMC
connectors comply with the standard.
Function
PMC
Location
J11A/J12A, J11B/J12B
Type
PMC Connector
P/N
71439-0164
Pinout
J11
Pin
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
Document: CTIM-00440
Revision: 0.02
J12
Signal
NC
GND
INTB#
BUSMODE1
INTD#
GND
CLK
GND
REQ#
V (I/O)
AD[28]
AD[25]
GND
AD[22]
AD[19]
V (I/O)
FRAME#
GND
DEVSEL#
GND
NC
PAR
V (I/O)
AD[12]
AD[09]
GND
AD[06]
AD[04]
V (I/O)
AD[02]
AD[00]
GND
Signal
NC
INTA#
INTC#
+5 V
NC
3.3 Vaux
GND
GNT#
+5 V
AD[31]
AD[27]
GND
C/BE[3]#
AD[21]
+5 V
AD[17]
GND
IRDY#
+5 V
LOCK
NC
GND
AD[15]
AD[11]
+5 V
C/BE[0]#
AD[05]
GND
AD[03]
AD[01]
+5 V
NC
Pin
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
Pin
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
Signal
+12 V
NC
NC
GND
NC
NC
RST#
3.3 V
NC
AD[30]
GND
AD[24]
IDSEL
+3.3 V
AD[18]
AD[16]
GND
TRDY#
GND
PERR#
+3.3 V
C/BE[1]#
AD[14]
M66EN
AD[08]
AD[07]
+3.3 V
NC
NC
GND
NC
GND
Signal
NC
NC
GND
NC
NC
+3.3 V
NC
NC
GND
AD[29]
AD[26]
+3.3 V
AD[23]
AD[20]
GND
C/BE[2]#
NC
+3.3 V
STOP#
GND
SERR#
GND
AD[13]
AD[10]
+3.3 V
NC
NC
GND
NC
NC
+3.3 V
NC
Page 26 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Pin
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Typical Hardware Installation Procedure
1.
Ensure all external system power supplies are OFF.
2.
Install the necessary cables for the application. At a minimum, this would include:
a)
Power cable to the input power connector
b) Connect a video display cable
c)
Keyboard and mouse via USB
d) SATA or mSATA hard drive
For additional information on the relevant cables, please see the Cables and Interconnects section of this
manual.
3.
Connect the power cable to power supply
4.
Ensure your power supply is in the range of +12V to +48V DC
5.
Switch ON the power supply. DO NOT power up your system by plugging in live power.
On-board Indicator LEDs
The CCG016 has 10 on-board indicator LEDs.
LED
Description
D15
+VIN
D36
+12V
D37
+5V
D38
+3.3V
D32
+1.2V**
D13
+1.5V
D14
+1.8V
D39
+5V Standby
D40
+3.3V Standby
D19
POWER
D1
SATA ACT#
D7
GBE ACT#
D8
GBE LINK
** D32 Only on when on-board NAND option is implemented.
Document: CTIM-00440
Revision: 0.02
Page 27 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Thermal Details
All components on the CCG016 are rated to a maximum operating temperature of -40°C to +85°C.
Mechanical Details
A complete 3D STEP Model file of the carrier can be downloaded here:
http://www.connecttech.com/ftp/3d_models/CCG016_3D_MODEL.zip
Document: CTIM-00440
Revision: 0.02
Page 28 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Cables and Cable Kit Information
Cable Kits
The following tables summarize the PMC/XMC Lite Carrier’s available cable kits from Connect Tech.
CKG028 – “Full” Cable Kit
Description
Part Number
QTY
Drawing No.
SATA HDD Signal and Power Cable
CBG090
2
CTIC-00347
VGA to 10-Pin Minitek Cable
CBG120
1
CTIC-00379
Dual DB-9 to 20-Pin Minitek Cable
CBG121
1
CTIC-00380
Dual USB 2.0 to 8-Pin Minitek Cable
CBG104
1
CTIC-00429
DisplayPort to 20-Pin Minitek Cable
CBG113
2
CTIC-00432
RJ-45 to 10-Pin Minitek Cable
CBG117
2
CTIC-00433
Dual Audio to 8-Pin Minitek Cable
CBG118
1
CTIC-00434
20-Pin Minitek System Cable
CBG116
1
CTIC-00435
Dual USB 3.0 to 20-Pin Cable
CBG131
2
OEM
CKG021 – “Starter” Cable Kit
Description
Part Number
QTY
Drawing No.
SATA HDD Signal and Power Cable
CBG090
1
CTIC-00347
VGA to 10-Pin Minitek Cable
CBG120
1
CTIC-00379
Dual USB 2.0 to 8-Pin Minitek Cable
CBG104
1
CTIC-00429
RJ-45 to 10-Pin Minitek Cable
CBG117
1
CTIC-00433
Additional Available Cables
Description
Part Number
Drawing No.
HDMI Female to 20-Pin Minitek Cable
CBG145
CTIC-00461
Dual USB 2.0 to 20-Pin Minitek Cable
CBG130
CTIC-00488
LVDS (DP20A-40DS) to Un-Terminated Wires
CBG125
OEM
Cable drawings may change, for current cable drawings please send an email request to: support@connecttech.com
Document: CTIM-00440
Revision: 0.02
Page 29 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
Detailed Cable Information
CBG090 - SATA HDD Signal and Power Cable
Document: CTIM-00440
Revision: 0.02
Page 30 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
CBG120 - VGA to 10-Pin Minitek Cable
Document: CTIM-00440
Revision: 0.02
Page 31 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
CBG121 - Dual DB-9 to 20-Pin Minitek Cable
Document: CTIM-00440
Revision: 0.02
Page 32 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
CBG104 - Dual USB 2.0 panel mount to 8-pin MiniTek Cable
Document: CTIM-00440
Revision: 0.02
Page 33 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
CBG113 - DisplayPort++ panel mount to 20-pin MiniTek Cable
Document: CTIM-00440
Revision: 0.02
Page 34 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
CBG145 – HDMI Female to 20-Pin Minitek Cable
Document: CTIM-00440
Revision: 0.02
Page 35 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
CBG117 - RJ-45 panel mount to 10-pin MiniTek Cable
Document: CTIM-00440
Revision: 0.02
Page 36 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
CBG118 - Dual 3.5mm Stereo Audio panel mount to 8-pin MiniTek w/Latch
Document: CTIM-00440
Revision: 0.02
Page 37 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
System Cable - Unterminated wires to 20-pin MiniTek w/Latch - CBG116
Unterminated Wires
Signal
Color
20-pin
MiniTek
-
+5V
green
1
-
SPEAKER
BLACK
2
-
NC
white
3
-
+5V Standby
BLACK
4
-
RTC EXT Battery
red
5
-
GND
yellow/silver
6
-
RESET#
orange/silver
7
-
GND
blue/silver
8
-
PWRBTN#
brown
9
-
GND
grey/silver
10
-
BATLOW#
yellow
11
-
GND
orange
12
-
EXT_S3#
blue
13
-
SMB.DAT
brown
14
-
I2C.CLK
grey
15
-
SMB.CLK
green
16
-
I2C.DAT
purple
17
-
SMB.ALERT#
red/white
18
-
+5V
blue/black
19
-
NC
green/white
20
Document: CTIM-00440
Revision: 0.02
Page 38 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
COM Express® PMC/XMC Lite Carrier
Users Guide
www.connecttech.com
CBG131 - Dual USB 3.0 to 20-Pin Cable
The CBG131 cable is an OEM 19-pin internal type cable, to panel mountable USB 3.0 Type-A Connector(s).
Note: Cable will not ship with bracket
Document: CTIM-00440
Revision: 0.02
Page 39 of 39
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016-11-28
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising