Compressor Cooler Pro
de
en
fr
it
nl
es
Compressor Cooler Pro
Bedienungsanleitung
Instructions for Use
Mode d’emploi
Istruzioni per l’uso
Gebruiksaanwijzing
Manual
Manual de instruções
Bruksanvisning
Руководство по эксплуатации
Typ JURA 570
pt
sv
ru
Compressor Cooler Pro
IMPORTANT SAFEGUARDS
Follow the basic safety precautions
When using electrical appliances, basic safety
precautions should always be followed, to reduce
the risk of fire, electric shock, and/or injury to persons, including the following:
Z Read all instructions.
Z To protect against fire, electic shock and injury to persons, do not immerse cord,
plugs, or body of machine in water or other
liquid.
Z Close supervision is necessary when any
appliance is used by or near children.
Z Unplug from outlet when not in use and
before cleaning.
Z Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any
manner. Return appliance to the nearest
authorized service facility for examination,
repair or adjustment.
Z The use of accessory attachement not recommended by the appliance manufacturer may result in fire, electric shock, or injury
to persons.
Z Do not use outdoors.
Z Do not let the cord hang over the edge of
a table or counter, or touch hot surfaces.
Z Do not place on or near a hot gas or electric
burner, or in a heated oven.
Z Always attach plug to appliance first, then
plug cord into the wall outlet. To disconnect, turn any control to »off«, then remove
plug from wall outlet.
Z Do not use appliance for other than intented use.
Z For household use only.
Special cord set instructions
a. A short power supply cord is provided to
reduce the risk resulting from becoming
entangled in or tripping over a long cord.
b. Longer extension cords are available and
may be used if care is exercised in their
use.
c. If an extension cord is used,
1. the marked electrical rating of the extension cord should be at least as great as
the electrical rating of the appliance, and
2. if the appliance is of the grounded type,
the extension cord should be a grounding type 3-wire cord, and
3. the longer cord shall be arranged so that
it will not drape over the counter top or
tabletop where it can be pulled on by
children of tripped over.
Z If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Z Do not modify the plug in any way or attempt to defeat this safety feature.
SAVE THESE INSTRUCTIONS
2
Compressor Cooler Pro
Warning
To reduce the risk of fire or electric shock, do not
remove any service covers. No user serviceable
parts inside. Repair should be done by authorized
personnel only.
Caution
This appliance is for household use only. Any
servicing other than cleaning and user maintenance should be performed by an authorized
service representative:
Z Do not immerse base in water or try to disassemble.
Z To reduce the risk of fire or electric shock,
do not remove the base. No user serviceable parts inside. Repair should be done by
authorized service personnel only.
Z Check voltage to be sure that the voltage
indicated on the name plate agreees with
your voltage.
Z Keep the cord away from hot parts of the
appliance during operation.
Z Never clean with scouring powders or hard
implements.
NEVER DO (or you will void your
warranty protection):
Z Never do anything with the appliance
which is not described in the User‘s Manual. In case of doubt, call your dealer.
3
Compressor Cooler Pro
4
de
Compressor Cooler Pro
Your Compressor Cooler Pro
Symbol description .............................................................................................................................................. 13
Control elements ..................................................................................................................................................14
Important information
15
Proper use ..............................................................................................................................................................15
For your safety ......................................................................................................................................................15
1 Preparation
16
Supplied as standard............................................................................................................................................16
Set-up and connection ........................................................................................................................................16
Connecting machine to IMPRESSA X9 .............................................................................................................16
Connecting machine to IMPRESSA X7 .............................................................................................................. 17
2 Cooling milk
17
3 Maintenance and cleaning
18
Maintenance ..........................................................................................................................................................18
Cleaning..................................................................................................................................................................18
4 Troubleshooting
18
5 Transport and environmentally neutral disposal
19
Transport ................................................................................................................................................................19
Disposal ..................................................................................................................................................................19
6 Technical data
19
Symbol description
Warning:
CAUTION
Always take note of any information
marked with the CAUTION or WARNING
symbol. The signal word WARNING
points out potential risk of serious
injury, and the signal word CAUTION
potential risk of slight injury.
Symbols used:
E
Information and tips to make things
easier for you as you use your Compressor Cooler Pro.
T
Prompt to take action. This symbol
means that you are being prompted to
perform some action.
13
en
Compressor Cooler Pro
Control elements
1
6
2
3
7
8
4
5
9
1
2
3
4
5
14
Compressor Cooler Pro
On/off button Q
with operation indicator lamp
Cartridge with front cover X9
Front cover X7
Front flap
6
7
8
9
Side opening
Cleaning container with cover
Positioning tab
Milk container with cover and riser
pipes fitted
de
Compressor Cooler Pro
Important information
Proper use
The machine is intended to cool milk in the
supplied milk container and keep it fresh for use
with a JURA automatic coffee machine. Use for
any other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsibility for the consequences of improper use.
Before using the machine always read these
instructions for use thoroughly and completely
and comply with the instructions they contain.
Keep these instructions for use close to the
machine and pass them on to the next user if
applicable.
For your safety
Please read and note carefully the following
important safety information.
To avoid the life-threatening danger of electric
shock:
Z Never use a machine which has been
damaged or with a defective mains cable.
Z Never use the machine when you have wet
hands.
Z Make sure the mains cable is dry before firsttime use.
Z Only connect the machine to the AC mains
power with the mains cable supplied with the
machine.
Z In the event of signs of damage, for example
if there is a smell of burning, unplug the
machine immediately from the mains supply
and contact JURA service.
Z If the mains cable or the machine is damaged, it must be repaired either directly by
JURA or by a JURA authorised service centre.
Z Make sure that the machine and the mains
cable are not located close to hot surfaces or
naked flames.
Z Be careful to ensure that the mains cable
does not get caught and does not rub against
sharp edges.
Z Never open and repair the machine yourself.
Do not modify the machine in any way that is
not described in the instructions for use. The
machine contains live parts. Repairs may only
be carried out by JURA approved service
centres, using original spare parts and
accessories.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
Z Ensure that the ventilation slots are not
covered.
Z Never allow the mains cable to loosely hang
down. The mains cable can be tripped over or
damaged.
Z Protect the machine from environmental
influences such as rain, frost and direct
sunlight.
Z Do not put the machine, cables or connectors
in water.
Z Do not put the machine or any individual
parts in the dishwasher. The cleaning
container and milk container are dishwashersafe.
Z Turn the machine off and disconnect the
mains plug before starting any cleaning
operation. Always wipe the machine with a
damp cloth rather than a wet one, and
protect it from prolonged water splash.
Z Only connect the machine to the mains
voltage in accordance with the information
on the rating plate. The rating plate is located
on the underside of the machine. Further
technical data is given in Chapter 6, ‘Technical
data’.
Z If you are absent for a prolonged period of
time, turn the machine off.
Z Do not leave the machine unattended when it
is in operation.
15
en
Compressor Cooler Pro
The machine is only allowed to be used by people
who can use it safely. People, including children,
who do not have the
Z physical, sensory or mental capabilities or
Z experience or knowledge
to use the machine safely must be supervised by
a responsible person when using it, or be
instructed in how to use it correctly.
1
Preparation
This chapter provides you with the information
you need to prepare your Compressor Cooler Pro
step by step for its first use.
If the Compressor Cooler Pro has been lying
on its side for a long time (e.g. during transport), it must be allowed to stand upright
for at least half an hour prior to first-time
use.
Please consult the rating plate on the
underside of the Compressor Cooler Pro
before connecting the machine.
E
E
J
WARNING
If the machine is operated with a defective mains
cable, there is a danger of electric shock.
T Never use a machine which has a defective
mains cable.
T Connect the mains cable to the machine.
Supplied as standard
The following items are supplied as standard:
Z Compressor Cooler Pro
Z Instructions for use
Z Milk container with cover
Z Cleaning container with cover
Z Mains cable
Z Docking cartridge (fitted)
Z Milk pipe (2x)
Z Riser pipes
Z Front cover for IMPRESSA X9
U with cover (chrome-plated)
Z Front cover for IMPRESSA X7
Set-up and connection
When setting up and connecting your Compressor Cooler Pro, please proceed as follows:
Z Set the machine down on a horizontal surface
that is not sensitive to water.
Z Choose a spot for the machine which is
protected against overheating.
Z Before using your new machine for the first
time wipe it carefully on the inside and
outside with a damp cloth for reasons of
hygiene.
T Insert the mains plug into a power socket.
Connecting machine to IMPRESSA X9
T Position the Compressor Cooler Pro to the
left of the IMPRESSA X9 with the aid of the
positioning tab.
T Open the front flap.
T Insert the cartridge.
T Connect the milk pipes to the front cover of
the cartridge.
16
de
Compressor Cooler Pro
T Connect the other ends of the milk pipes to
the IMPRESSA X9.
T Insert the front cover for the IMPRESSA X7.
T Close the cartridge.
T Open the front flap of the Compressor
Cooler Pro.
T Guide the milk pipe of the IMPRESSA X7
T Fit the chrome-plated cover.
Connecting machine to IMPRESSA X7
T Open the two snap fastenings on the
through the side opening of the Compressor Cooler Pro.
T Position the Compressor Cooler Pro to the
left of the IMPRESSA X7 with the aid of the
positioning tab.
T Connect the milk pipe to the rear of the
cartridge.
T Insert the cartridge.
2 Cooling milk
cartridge.
T Fill the milk container with milk.
T Fit the cover on the milk container.
T Insert the two riser pipes in the milk
container.
T Open the front flap.
T Slide the milk container into the Compressor Cooler Pro as far as it will go.
T Press down the connection tab on the
cartridge.
T Remove the two pipes.
T Remove the front cover for the IMPRESSA X9.
T Connect the longer pipe as shown in the
illustration.
Q T Switch the machine on with the on/off
button.
17
en
Compressor Cooler Pro
The operation indicator lamp lights up and
the machine starts to cool the milk.
T Close the front flap.
E
E
E
E
T Fill the cleaning container on the side
The machine switches on and off automatically during cooling. In this way, your
Compressor Cooler Pro always keeps the
temperature of the milk in the optimum
range. The milk cannot freeze.
If you want to stop cooling, press the on/off
button.
Condensation may form inside the machine
during operation. This should be removed
with a cloth.
If the Compressor Cooler Pro will not be
used for a long period, leave the front flap
open.
T
T
T
T
T
T
T
T
3 Maintenance and cleaning
Maintenance
T
E
Do not use any sharp, corrosive or abrasive
cleaning agents or hard objects for
maintenance. These could damage the
machine, the individual parts and the
plastic container.
T
T
T Before cleaning the machine disconnect the
mains plug from the power socket.
T
T Wipe the inside and outside of the machine
with a damp cloth.
T
T Rinse the plastic container and the
individual parts thoroughly with running
water.
marked ‘6’ with water up to the level
indicated and add 1.5 capfuls (max. 15 ml) of
Cappuccino Cleaner.
Fill the other side (marked ‘,’) with fresh
water up to the level indicated.
Open the front flap.
Slide the connection tab on the cartridge
upwards and remove the milk container.
Remove the two riser pipes from the milk
container.
Place the riser pipes in the cleaning
container, on the side with the cleaning
solution (indicated by 6).
Slide the cleaning container into the
Compressor Cooler Pro as far as it will go.
Press down the connection tab on the
cartridge.
Now start ‘Milk system cleaning’ (IMPRESSA
X7: ‘Cappuccino system cleaning’) as
described in the instructions for use for the
coffee machine.
As soon as your coffee machine requests
fresh water for cleaning, remove the
cleaning container.
Lift the cover, turn the cleaning container
and replace the cover so that the riser pipes
are in the fresh water side (indicated by ,).
Slide the cleaning container into the
Compressor Cooler Pro as far as it will go.
Press down the connection tab on the
cartridge.
Now continue with ‘Milk system cleaning’
as described in the instructions for use.
4 Troubleshooting
Cleaning
To ensure that the Compressor Cooler Pro works
perfectly, you should clean it daily using JURA
Cappuccino Cleaner.
E
18
JURA Cappuccino Cleaner is available from
stockists.
Z
The milk container is frozen up.
U Open the front flap, switch off the
Compressor Cooler Pro and wait several
minutes.
U Remove the condensation that forms with a
cloth.
de
Compressor Cooler Pro
Z
The milk container will not go all the way in.
U Slide the connection tab on the cartridge
upwards.
5 Transport and environmentally
neutral disposal
Transport
Keep the packaging of your Compressor Cooler
Pro. It should be used to protect the machine
during transport.
Clean the milk container before transport.
Weight
18.5 kg
Holding capacity of
milk container
4.0 l
Cable length
Approx. 1.8 m
Dimensions (W x H x D)
21 x 45 x 32 cm
Climate class
N
(for ambient
temperatures of +16°C
to +32°C)
en
Disposal
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable materials capable
of being recycled which should be salvaged for
recycling. Please therefore dispose of old machines
via suitable collection systems.
6 Technical data
E
The voltage and frequency will vary
depending on the safety test. Please observe
the rating plate before connecting the
machine.
Voltage
100–240 V AC,
50–60 Hz
Safety test
Refer to the rating
plate on the underside of the machine
Power
70 W
Temperature range
Cools to 35°C below
ambient temperature,
but not below 4°C
19
Compressor Cooler Pro
Technical changes
We reserve the right to make technical changes.
Feedback
Your opinion is important to us!
Use the contact link at www.jura.com.
The instructions for use contain information which
is protected by copyright. It is not permitted to
photocopy or translate these instructions for use
into another language without the express written
consent of JURA Elektroapparate AG.
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
www.jura.com
20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising