POSITIONING SYSTEMS FOR EMC BUSINESS

POSITIONING SYSTEMS FOR EMC BUSINESS
POSITIONING SYSTEMS FOR EMC BUSINESS
PRODUCT OVERVIEW
TABLE OF CONTENTS
TURNTABLES .................................................. 4
ANTENNA STANDS AND MASTS ....................... 10
3D MEASURING SYSTEMS ............................... 14
VARIOUS POSITIONERS .................................. 18
CONTROLLERS .............................................. 24
VARIOUS SYSTEMS ........................................ 28
COMPANY PROFILE ........................................ 33
MEMOS ........................................................ 34
3
4
TURNTABLES
CT
0.5…1.0 m
50…150 kg
■■■
DS-HA
1.2…2.0 m
300…500 kg
■■■
DS-HE
1.2…2.0 m
300…500 kg
■■■
DS-S
1.2…2.5 m
500…1,500 kg
■■■
DT
2.0…12 m
1,000…100,000 kg
■■■
STANDARD TURNTABLES
Compact Table CT0800
Turndisc DS1200HA…2000HA
■ Diameter: 0.5 m 0.8 m 1.0 m
Load:
75 kg 75 kg 75 kg
■ Diameter: 1.2 m 1.5 m 2.0 m
Load:
300 kg 500 kg 500 kg
■ Material of carrier plate:
Kömacell
■ Material of carrier plate:
wood (multiplex plate)
■ EUT connection:
ø 45 mm centre hole
■ EUT connection:
centre of turntable
■ Compact drive unit
■ Compact drive unit
■ Positioning accuracy:
better then ±1°
■ Positioning accuracy:
better then ±1°
Turndisc DS1200HE…2000HE
■ Handling aids
Covered With Ferite Tires Under
Top Plate
■ Optional: movable by installed
rollers
■ Diameter: 1.2 m 1.5 m 2.0 m
Load:
300 kg 500 kg 500 kg
■ Material of carrier plate:
wood (multiplex plate)
■ EUT connection:
centre of turntable
■ Compact drive unit
■ Positioning accuracy:
better then ±1°
5
6
STANDARD / CUSTOM TURNTABLES
Turndisc DS1200S…DS2000S
Turndisc Customizing
Example: Turntables
■ Diameter: 1.2 m 1.5 m 2.0 m
Load:
300 kg 500 kg 750 kg
■ Material of carrier plate:
stainless steel
■ EUT connection:
centre of turntable
■ Compact drive unit
■ Positioning accuracy:
better then ±1°
■ Customized CP
■ Energy chain
■ Exhaust system
■ Load increasing
■ Indoor / outdoor
■ Optional: MIL execution
■ Diameter: 2.0 m…
Load:
1 to
■ Material of carrier plate:
stainless steel
■ EUT connection:
centre of turntable
external connection possible
■ Gear motor with PWM
■ Positioning accuracy:
better then ±1°
CUSTOM TURNTABLES
Example: DT5000-5t-EC-EG
Turntable Customizing
Pre Installed Cables
■ Diameter: 5.0 m
Load:
5 to
■ “Smart energy chain“
(integrated in the base frame)
■ EUT connection: CP Ø 300 mm
■ Reduced costs
■ Prepared for using of RPS-F incl.
■ No extra time needed on site
■ Separate CP
■ Exhaust system
■ Fan system with air hose:
better then ±1°
■ Energy chain
■ Customized CP
■ Exhaust system
■ Fan
■ Preparation for roller bench
■ Dual turntable
■ Limit switch system
■ Load increasing
■ Indoor / outdoor
■ Position scala
■ Optional: MIL execution
7
8
TURNTABLES WITH DYNAMOMETERS
Integrated and Free Standing Dynamometers
Ex.: DT6500-4t-RPS40-100-1
■ Data Overview
Turntable diameter
6,500 mm
Turntable max. load
4,000 kg
Dynamometer axle load 2,000 kg
Quantity of active axles /
roller pairs
2/4
Installed power per tire
20 kW
Voltage
400 V
Needed current max.
210 A
Stainless steel env.
7,500 m
Max. axle distance
3,200 mm
Min. axle distance
1,800 mm
Nominal acceleration
10 m/s2
Up to
100 km/h
Max. speed
100 km/h
Inner roler edges
900 mm
Outer roller edges
2,100 mm
Roller diametres
240 mm
Fan section capacity 39,500 m3/h
Fan outlet dim. 1,250 x 500 mm
Air speed
63 km/h
Exhaust connection
in turntable ground plane
2
Nominal dimension
of exhaust connection
200 mm
Installation time on site
(approx.)
8 weeks
SOFTWARE / FREE STANDING DYNAMOMETERS
Dynam Pro Control Software
RPS-F 40-100-0.5
■ Constant speed mode
■ Gradient speed mode (ABS/ESP test)
■ Street (road) simulation mode
■ Up/downhill mode for hybrid or EV-vehicle
■ Torque/speed analyzer function
■ File storage for vehicle and test cycles
■ Optional driving robot system
■ Optional ignition key actuator
■ Communication by only one fibre optic cable
■ Real time communication below 1 ms cycle time
■ High performance PLC and motor driver
■ Extendable and customizable
■ Data Overview
Axle load
2,000 kg
Quantity of active axles /
roller pairs
2/4
Installed power per tire
15 kW
Voltage
400 V
Needed current max.
210 A
Nominal acceleration
0.5 m/s2
Up to
100 km/h
Max. speed
100 km/h
Inner roller edges
900 mm
Outer roller edges
2,100 mm
Roller diametres
240 mm
9
10
ANTENNA STANDS AND MASTS
ASPP
0.8…3.0 m
6…15 kg
■■■
ASEP
0.8…3.0 m
6…15 kg
■■■
MMPP
1.0…4.0 m
6 kg
■■■
MAEP / PPET
1.0…6.0 m
10…15 kg
■■■
TWEP / PPET 1.0…10.0 m
15…25 kg
■■■
ANTENNA STANDS
AS2000PP / AS2000PP-15 kg
AS1500 EE / AS2000EP-H
Custom Antenna Stands
■ Antenna height fix:
■ Antenna weight:
■ Polarisation:
■ Antenna height
AS1500E
AS2000EP-H
fix 1.5 m
0.7…2.0 m
■ Antenna weight:
max. 6 kg
■ Polarisation:
1.5 m
max. 20 kg
manually
electric
(designed for AR antennas)
■ Antenna height:
(Antenna center)
min. 193 cm
max. 316 cm
■ Height adjustment
by hand crank
■ Antenna height
adjustable:
■ Antenna weight:
0.7…2.0 m
■ Polarisation:
■ Tilt angle:
■ Antenna weight:
AS2000PP
AS2000PP-15 kg
max. 6 kg
max. 15 kg
■ Polarisation:
pneumatic
max. 50 kg
manually
0°…30°
11
12
ANTENNA MASTS
MM4000-PP
MA4000-EP or PP
MA4000-XP-ET
■ Antenna scan height: 1.0…4.0 m
■ Antenna scan height: 1.0…4.0 m
■ Antenna scan height: 1.0…4.0 m
■ Antenna weight:
■ Antenna weight:
■ Antenna weight:
■ Polarisation:
max. 6 kg
max. 10 kg
max. 10 kg
pneumatic
■ Polarisation: electric or pneumatic
■ Tilt angle adjustable:
■ Mast standard speed: 15 cm/sec
max. possible speed: 20 cm/sec
■ Mast standard speed: 12 cm/sec
max. possible speed: 25 cm/sec
■ Mast standard speed: 12 cm/sec
max. possible speed: 20 cm/sec
■ Optional: MIL execution
0°…45°
ANTENNA MASTS / ADAPTERS
TW4000-EP/PP / TW10000-EP-O
TW4000-PP-T
Antenna Adapters
All for one:
■ Antenna scan height: 1.0…4.0 m
■ Antenna weight:
max. 20 kg
■ Polarisation: electric or pneumatic
■ Mast standard speed: 12 cm/sec
max. possible speed: 25 cm/sec
■ Antenna scan height: 1.0…4.0 m
■ Antenna weight:
max. 15 kg
■ Polarisation:
pneumatic
■ Tilt angle adjustable:
■ Antenna scan height: 1.0…10.0 m
■ Antenna weight:
■ Polarisation:
max. 20 kg
electric
■ Mast standard speed: 12 cm/sec
max. possible speed: 25 cm/sec
0°…45°
■ Mast standard speed: 12 cm/sec
max. possible speed: 25 cm/sec
13
14
3D MEASURING SYSTEMS
Type
Test Application
EUT Weight
DE3330RH CABLE AND WIRING
4 kg
■■■
DE3600RH MOBILE PHONE
4 kg
■■■
DE3700RH
DE3750RH LAPTOP AND SAM HEAD 10 kg
■■■
DE3800RH MOBILE PHONE, LAPTOP
AND SAM HEAD
15 kg
■■■
DE3900RH TIRE PRESSURE SENSOR
MEASUEREMENT
50 kg
■■■
STANDARD TURNUNITS
Turn Device DE3600-RH
Turn Device DE3700-RH
■ Max. weight of EUT:
■ Rotation speed:
Turn Device DE3750-RH
10 kg
5.31 rpm
■ Material of the head:
Rohacell 110 IG (57.8 vol %)
Fibre glass
POM (21.26 vol %)
PTFE (20.94 vol %)
■ Max. weight of EUT:
■ Rotation speed:
2 kg
5.31 rpm
■ Material of the head:
Rohacell 110 IG (87.4 vol %)
POM (11.4 vol %)
PTFE (1.0 vol %)
■ Drive unit in turntable integrated
■ Max. weight of EUT:
■ Rotation speed:
10 kg
5.31 rpm
■ Material of the head:
Rohacell 110 IG (57.8 vol %)
POM (21.26 vol %)
PTFE (20.94 vol %)
15
16
STANDARD AND CUSTOM TURNUNITS
Turn Device DE3800-RH
■ Max. weight of EUT:
■ Rotation speed:
Turn Device DE3330-RH
15 kg
2.50 rpm
■ Material of the head:
Rohacell 110 IG (95 vol %)
POM (3.0 vol %)
PTFE (2.0 vol %)
■ Max. weight of EUT:
■ Rotation speed:
Turn Device DE3900-RH
4 kg
2.30 rpm
■ Material of the head:
Fibre glass (3.5 vol %)
POM (11.0 vol %)
PTFE (0.8 vol %)
Turn device DE3900-RH
(for tire pressure sensor
measurement)
■ Max. weight of EUT:
50 kg
■ Rotation speed: 0.30…1.00 rpm
■ Rotary joint for compressed
air supply
■ Material of positioner:
Rohacell 51 IG
NEARFIELD MEASURING
Gantries
Typical data:
■ Max. antenna weight: 10 kg (22 lb)
■ Radius:
7, 7.5, 8, 8.5 or 9 m
■ Elevation height:
1…2.5 m
■ Angle of movement:
0…180°
■ Positioning speed:
1.2°/sec
■ Positioning accuracy:
±1°
17
18
VARIOUS POSITIONERS
SINGLE AXIS POSITIONERS
■■■■■■■■■■■■■■
DUAL AXIS POSITIONERS
■■■■■■■■■■■■■■
TRIPLE AXIS POSITIONERS
■■■■■■■■■■■■■■
CUSTOMIZED POSITIONERS
■■■■■■■■■■■■■■
VARIOUS POSITIONERS
FSM2315
VSWR1500-MP
VSWR15000-MP
■ Movement range: 1.5 m (electric)
■ Antenna height:
0.8…2.3 m (manual)
■ Polarisation:
■ Movement range: 15 m (electric)
manually
■ Mast rotatable: 0…360° (manual)
■ Antenna weight:
max. 3 kg
■ Positioning speed: 1…12 cm/sec
■ Positioning accuracy:
± 3 mm
■ Antenna height:
0.8…2.3 m (manual)
■ Polarisation:
■ Mast rotatable: 0…360° (manual)
■ Antenna weight:
■ Horizontal moving range: 1.5 m
■ Sensor weight:
■ Positioning accuracy:
max. 2 kg
± 1 cm
max. 6 kg
■ Positioning speed: 1…12 cm/sec
■ Positioning accuracy:
■ Vertical sensor position: 0.8…2 m
manually
± 3 mm
19
20
VARIOUS POSITIONERS
MP2200
■ Movement range:
XYZ120815
2,200 mm
■ Material: PVC (except the drive)
■ Overall length:
■ Max. load:
■ Positioning speed:
approx. 1 cm/sec.
3,500 mm
80 kg
■ Moving range:
X-Axis 0.7 m
Y-Axis 1.2 m
Z-Axis 1.0 m
■ Sensor weight:
max. 5 kg
■ All 3 axis movable
at the same time
■ Positioning accuracy:
better ± 5 mm
VARIOUS POSITIONERS
KMS5300 / KMS6000
■ Measuring length:
■ Measuring hight:
5.4 m / 6.1 m
0.8 m
■ Positioning speed min.
2.5 cm / sec
■ Positioning speed max.
20 cm / sec
■ Positioning accuracy:
± 0.5 cm
■ Manually moveable and lockable
■ Manually moveable clamp support
21
22
VARIOUS POSITIONERS
On Clients Request
VARIOUS POSITIONERS
Aircraft Positioning System
Aircraft Lift
■ Load capacity:
■ Height max:
Turntable
75 tons
13 m
■ Force of hydraulic cylinders:
350 tons
■ Beam angle to the horizontal:
65 degrees
■ Elevation angle:
Photo-Voltaic Pos. System
± 35°
■ Diameter:
18 m
■ Height:
2.2 m
■ Load capacity:
■ Accuracy:
■ Turning angle:
■ Turning time:
100 tons
± 0.1°
± 225°
5 to 60 min
■ Sun-sensor for highest
efficiency
■ Diameter:
■ Load capacity:
■ Drive motor:
12 m
25 tons
frictional wheels
23
24
CONTROLLERS
SINGLE AXIS CONTROLLER
■■■■■■■■■■■■
MULTIPLE AXIS CONTROLLER
UP TO 4 DEVICES
■■■■■■■■■■■■
MULTIPLE AXIS CONTROLLER
UP TO 8 DEVICES
■■■■■■■■■■■■
HAND CONTROL UNIT
■■■■■■■■■■■■
PC CONTROL
■■■■■■■■■■■■
CONTROLLERS
CO3000 (New)
CO2000
CO1000
■ Control one single axis device
(turntable, slide bar…)
■ Fibre optic cable connection
■ GPIB interface
■ Control up to eight devices
(turntables, masts, turndevices…)
■ Control up to four devices
(turntables, masts, turndevices…)
■ Fibre optic cable connection
■ Fibre optic cable connection
■ GPIB, TCP/IP & USB interface
■ GPIB interface
■ Drivers will be supported
by software from:
Rohde & Schwarz
Agilent Technologies
TDK
TOYO Corporation
DARE!!
Schwarzbeck Mess-Elektronik
Schaffner
■ Drivers will be supported
by software from:
Rohde & Schwarz
Agilent Technologies
TDK
TOYO Corporation
DARE!!
Schwarzbeck Mess-Elektronik
Schaffner
■ Drivers will be supported
by software from:
Rohde & Schwarz
Agilent Technologies
TDK
TOYO Corporation
DARE!!
Schwarzbeck Mess-Elektronik
Schaffner
25
26
CONTROLLERS
Hand Control Unit
GPIB Control for Antenna Stand
■ Control up to three devices
(turntables, masts, turndevices…)
■ Control one polarisation axis
of antenna stand (EP & PP)
■ Fibre optic cable connection
■ Fibre optic cable connection
■ EMC shielded, auto off
■ GPIB interface
■ Works with CO2000 and
CO3000 controller
■ Drivers will be supported
by software from:
Rohde & Schwarz
Agilent Technologies
TDK
TOYO Corporation
DARE!!
Schwarzbeck Mess-Elektronik
Schaffner
CONTROLLERS
PC-Control by innco.dll
■ innco.dll file for C++ MFC project or
■ inncoVB.dll file for Visual Basic
■ Incl. demo program
■ Incl. USB-RS232 converter without external power supply
■ Up to 921600 bits/s and status LEDs
■ Available for all innco devices
27
28
VARIOUS SYSTEMS
PROJECTION SCREEN S
■■■■■■■■
COMPACT COOLING FANS
■■■■■■■■
WALL MOUNTING BRACKETS
■■■■■■■■
LOW REFLECTIVE EUT TEST TABLES
■■■■■■■■
MODE STIRRER
■■■■■■■■
VARIOUS SYSTEMS
Projection Screen
■ For white caps and
as ”stand alone“
■ In 100“ and 120“
Compact Cooling Fan
■ Wind speed:
■ Air stream:
50 km/h
10,000 m3/h
■ Operating voltage:
230 V
■ Current consumption:
■ Material:
6A
wood and PVC
29
30
VARIOUS SYSTEMS
Wall mounting brackets
■ Custom made and standard
■ For any weight and absorbertype
VARIOUS SYSTEMS
Low Reflective EUT Test Table -SD and -RH
LED Chamber Light LCL-I18
■ Length:
2.0 m
■ Supporting material:
PMMA
■ Voltage for power supply:
115 V / 230 V AC (50/60 Hz)
■ Voltage inside chamber: 12 V DC
■ AC current:
■ Height
■ Table Top
0.8 m
Ø 1.2 or 1.5 m
1.2 m x 0.8 m or
1.5 m x 1.0 m or
1.8 m x 1.0 m
2.5 A (at 115 V)
1.2 A (at 230 V)
■ Illuminating segments in LCL-I18:
3 stripes
■ Available colour temperature:
3,500 K / 6,800 K
■ Load capability 100, 120 or 150 kg
■ Luminous flux per segmen/stripe:
900 lm / 1,100 lm
-SD
■ Primary angle of light radiation:
30…120°
■ Material:
Styrofoam
■ Dielectric constant ε at 1 MHz: 1.2
■ Table Top:
Perdinax t=1 mm
■ Dielectric constant ε at 1 MHz: 1.6
-RH
■ Material:
Rohacell
■ Dielectric constant
ε at 1 MHz:
■ Table Top:
1.04
Perdinax t=1 mm
■ Dielectric constant ε at 1 MHz: 1.6
■ The LCL-I18 can be combined
with other chamber lights in
various shapes.
31
32
VARIOUS SYSTEMS
Mode Stirrer (for Reverb Chambers)
RTG IV
■ Reaction time test device
■ Transportable in case
■ Adjustable drive speed
■ Adjustable road condition
■ Random generator STOP! signal
■ Micro processor measurement
■ With integrated printer
for the test reports
COMPANY PROFILE
innco Systems GmbH
Innco Systems GmbH is a medium-sized company located in Schwarzenfeld
(Germany).
We are one of the world‘s leading manufacturers of electromagnetic positioning systems for EMV / EMC measurement applications and in the area
of HF measuring technology. Special orders according to customer requirements are just as much a part of our product spectrum as standard systems
proven over many years.
Our active, direct work on site with customers means we are a competent
contact point at any time as an independent supplier for positioning tasks.
Short decision paths, customer-orientated suggestions for solutions, and
the greatest possible flexibility guarantee high-quality products to give our
customers that added value they need to be competitive – globally.
Origin
Innco Systems GmbH was founded in 2008 from a merger of HD-GmbH and
Inn-Co GmbH and is therefore the direct successor of both. This ensures
that former customers of those two companies also receive uninterrupted
service and support for their systems as they need it – without limitation or
legal concerns.
33
34
MEMOS
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■
innco systems GmbH
Erlenweg 12
92521 Schwarzenfeld
Germany
Phone +49(0)9435/301659-0
Fax
+49(0)9435/301659-99
E-Mail info@inncosystems.com
www.inncosystems.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising