TransAir DTS-2000 Series

TransAir DTS-2000 Series
TransAir™ DTS-2000 Series
Dynamic Telematics System for Machine-to-Machine Wireless Connectivity Applications
• Proven design for rugged applications in mobile and fixed
• Compact, fanless design -40 to +70 ºC operation
• Modularity for extensible connectivity
• Advanced Intelligent Power Management
• Module options for Wi-Fi, 4G LTE, and GPS
• Low power consumption
• Integrated application engine with Ethernet switch and router
• Integrates with commercial network management systems
• Virtual IP KVM support for remote management
• Compliant with AAR Standard S-9401 and EN-50155
The DTS-2000 Series from LILEE Systems provides an interoperable
communications gateway for mobile and fixed communications
networks. The DTS-2000 features an integrated communications
management application that provides a consistent IP address and
network connectivity to remote assets when roaming across service
provider networks or wireless technology. This application dynamically
selects the preferred communications path to a centralized facility
using user-selectable performance metrics. This unique functionality
enables the DTS-2000 to aggregate bandwidth simultaneously across
4G LTE cellular, Wi-Fi, and Ethernet interfaces as these services are
available, allowing the greatest amount of throughput at the lowest
possible cost.
For third party system integrators, the DTS-2000 includes an internal
x86 application processor that allows users to develop their own value
added applications without worrying about network availability. The
applications can always be reached from the control center through
any of the configured communication links. The Policy Engine selects
Wi-Fi (the most economic link) to deliver the packets when both Wi-Fi
and cellular are available. For applications that demand high reliability,
the DTS-2000 offers intelligent link selection according to the internal
policy engine configuration. Intelligent link management significantly
improves train safety for Positive Train Control applications by
delivering the train control commands more reliably when using lossy
wireless links.
• Provide an intelligent wayside platform for Wayside Interface Unit
(WIU) message queuing, trackside sensor readings, and remote
message processing and caching
• Provide a constantly connected locomotive platform with Mobile-IP
technology regardless of the wireless technology used
• Enable a high degree of confidence that the train control
commands will be delivered reliably by using LILEE Systems’ Policy
Engine for QoS
• Balance cellular data plan usage among multiple cellular carriers to
avoid overage charges
• Connect legacy devices at the wayside or in the mobile
environment to centralized dispatch using the built-in analog /
digital input and output interfaces
• Act as a data aggregation management gateway for HBDs, AEIs,
and various sensors in the field
© LILEE Systems. LILEE and TransAir are trademarks of LILEE Systems. All rights reserved. Specifications and features vary by model and are subject to change without notice. Please visit our website for the most up-to-date product information.
REV 2015.10.21
Processor / Memory / Storage
x86 Application Processor
1 GB on-board memory and 8 GB CFast flash disk storage allocated to the VM
Certified Red Hat Linux OS
Input Voltage
Power Connector
Power Consumption
Ethernet Interface
IEEE 802.3u for 10/100 BaseT(X), Auto-Negotiation, Auto-MDI/MDIX
Protocol Support
IP Routing, DHCP, SNMPv2, SMS (Short Message Service), NTP, NAT
ITC Protocol Support
IPsec, AES Encryption, SSH, DTLS
Remote Management
Virtual IP KVM remote management
LILEE Mobility Controller (LMC) based centralized management
Restful API and SNMP (host and interface MIBs) for commercial network management integration
Local Management
Serial console port
Ethernet maintenance port
Serial Interface
Optional RS-232/422/485 Serial port via DB-9
10 to 30 VDC
3-pin terminal block
1.7 A @ 12 VDC (typical operation)
0.6 A @ 12 VDC (idle)
0.3 A @ 12 VDC (sleep)
FCC Part 15 Subpart B
AT&T, Verizon, and Sprint
Red Hat Hardware Certification
RoHS compliant
Ordering Information
(subject to change)
DTS-2000 Chassis
8G Cfast Flash Card
Precision GPS Interface Card
IC-LTE 4G Cellular Interface Card (USA)
4G Cellular Interface Card (Global)
4G Cellular + GPS Interface Card (USA)
4G Cellular + GPS Interface Card (Global)
802.11b/g/n Wi-Fi Interface Card
SSM-1GSSM card
DIN Rail Mount
I/O Interface Connectors
1 x Analog I/O connector (6 analog-in, 2 analog-out, 2 GND)
12-bit resolution
Programmable data rate from 128 SPS to 3.3 KSPS
Continuous mode or one-shot mode
Two differential or four single-ended
Output voltage range from 0 to 3.3 V
Less than 12uS output voltage settle time
1 x Digital I/O connector (4 digital-in, 4 digital-out, 2 GND)
1 x CFast slot with pre-installed 8 GB CFast card (6 GB allocated to VM
App-Engine storage)
3-port 10/100 Mbps Ethernet managed switch (RJ45)
1 x 10/100 Mbps maintenance Ethernet port (RJ45) for dedicated diagnostic connection
1 x Reset button
1 x RS-232/422/485 Serial port via DB-9
1 x Serial console port via RJ45
1 x USB 2.0 for SSM
1 x 4-pin WakeOn connector (toggle, throttle, on/off, GND)
1 x 3-pin terminal block power connector
Physical Characteristics
Fanless design
HousingMetal housing
Dimensions (H x W x L)
1.7 x 6.6 x 9.8 in (44 x 167 x 250 mm)
Net Weight
5.12 lbs. (2.32 kg)
Shelf, Wall, and optional DIN-rail mounting
Environmental Limits
Functional Operating Temperature -40 to 70 °C (-40 to 158 °F)
Safe Operating Temperature
-40 to 50 °C (-40 to 122 °F)
Storage Temperature
-55 to 85 °C (-67 to 185 °F)
Ambient Relative Humidity
5% to 95% (non-condensing)
641 River Oaks Parkway | San Jose, CA 95134 | Tel: 408.988.8672 | |
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF