IP Head-end

IP Head-end
G O I N G F U T U R E T O D AY.
IP
IP Head-end
Modular solutions for high density signal processing
Made in
Germany
Perfect signal processing
A flexible system with outstanding signal quality
The U series offers a complete, adaptive solution for IP signal processing with modular architecture. It features easy configuration and
maintenance via webbrowser interface as well as a maximum of operating stability by utilizing redundant power supply and elaborate
redundancy mechanisms.
NTSC
zz 19 Inch base units
To ensure maximum operating stability, the base units of
the U 100 series can be equipped with redundant power
supply. Each U 100 base unit can house up to three modules.
zz Management Controller
The U 100-C controller in conjunction with the webbrowserbased configuration makes the management of
your IP head-end via an IP address comfortable.
zz IP Streamers
You want to convert DVB-S2, DVB-C, DVB-T or DVB-T2 input signals into IP? The streamers of the U series offer up
to 4 or 8 IP multicast groups, making it possible to generate
up to 12 resp. 24 streams per rack unit.
zz Signal converters with integrated IP frontend
You need COFDM, PAL / NTSC, QAM or FM output signals?
The U series will offer the complete range. And every module has it‘s own IP frontend.
zz Descrambler
The U 194 module processes up to 4 transport streams (4
x IP > 4 x IP) and supports multi-service-descrambling.
zThe
z Gateways
Direct Digital® Technology developed by ASTRO alU 261 and U signal
262 modules
convertindependent
up to 16 IP MPTS
lowsThe
for outstanding
parameters
from
into 16 DVB
output
streams system
resp. 16ressources,
DVB ASI output
temperature
andASI
aging.
Additional
mastreams
into 16
IP MPTS.
ximum
flexibility
in configuration
as well as high-end video-
and audioparameters set new benchmarks.
Index
L
U 261 i.....................................................page 40 - 41
LGH 2000.....................................................page 45
U 262.......................................................page 40 - 41
U 262 i.....................................................page 40 - 41
T
U 261 TSL.......................................................page 41
TS-Analyzer...................................................page 41
U 262 TSL.......................................................page 41
U 901..............................................................page 42
U
U 911 - U 946.................................................page 44
U 100-230.....................................................page 14
U 960..............................................................page 43
U 100-48.......................................................page 14
U KF................................................................page 45
U 100-C........................................................page 15
U 144......................................................page 16 - 17
V
U 148......................................................page 18 - 19
VZN 8.............................................................page 42
U 149......................................................page 18 - 19
U 164......................................................page 20 - 21
U 168......................................................page 22 - 23
U 116......................................................page 24 - 25
U 118......................................................page 24 - 25
U 118-x...................................................page 24 - 25
U 124......................................................page 26 - 27
U 125......................................................page 26 - 27
U 158......................................................page 28 - 29
U 159......................................................page 30 - 31
U 160......................................................page 32 - 33
U 174......................................................page 33 - 34
U 194......................................................page 35 - 36
U 261......................................................page 38 - 41
Where to find what?
q
q
q
q
Active and passive combining
42
Features and technical data
42
Active SAT splitters
44
Features and technical data
44
Accessories
45
12
Channels selective filters
45
U 100 modules (features and technical data)
14
Mounting cabinets
Gateways
38
Carrier Class Technology - the U series
04
Base units and modules at a glance
05
Carrier Class Edge Components
06
Overview
06
Configuration and maintenance
10
The U 100 redundancy concept Overview
38
Features and technical data
40
q
q
q
q
q
45
Application examples
46
Technical appendix
50
Abbreviations in digital technology
50
Contact 52
3
Carrier Class Technology - the U series
The U series head-end components were designed and developed for professional applications in largest cable networks. All devices of this series are built in 19“ technology and some are equipped with redundant power supply units
or can be updated with redundant power supply optionally.
Carrier Class Edge Technology
The U 100 series is a modular designed IP head-end concept.
The base unit can house upt to three modules that can optionally
be operated with redundant power supply. Hardware and software both offer all mechanisms, that contribute to ensure the best
operational signal availability.
Gateways
The U 261 IP / ASI reception gateway converts up to 16 IP MPTS
into 16 DVB ASI output streams. The U 262 ASI / IP transmission
gateway can convert up to 16 DVB ASI signals into IP MPTS. These devices support RTP and FEC, a transport stream analyzer is
optionally available.
Active and passive combining
For combining of head-end signals ASTRO offers active and
passive components. The U 960 can be equipped with splitters
according to customers needs, while the active U 901 (1 x 1 in
8) offers amplification designed for lowest intermodulation. The
redundant power supply is achieved either via separate power
supply units or by remote feeding via RF jack.
Active SAT splitters
FAQ
The U 9xx SAT distribution field can be ordered in different variations. 1 x 1 in 16 or 2 x 1 in 8, in 75 Ω or 50 Ω implementaion
– anything is possible. Furthermore these units can be integrated
into the ASTRO bus system making it possible to do a remote
configuration of attenuation and slope. It is as well possible to
supervise the LNC current consumption.
What does „Direct Digital“ mean?
Why are RTP and FEC recommended?
Direct Digital features the completely digital modulation of output signals.
In addition the new technology on an
FPGA basis leads to outstanding signal parameters, independent of temperature and aging. The modulator is realized as software solution with many positive effects.
Changing the standard of an output signal is done by programming the module via Web GUI. No tuning of hardware is required.
RTP (Real-time Transport Protocol) is important to evaluate the
quality of the link between signal source and receiver. Every transmitted Ethernet frame gets an increment number according RTP.
As a result the receiver is able to recognize missing or reordered
frames. Any packet loss is only recognized but not repaired. To fix
the packet loss FEC (Forward Error Correction) is mandatory. The
FEC assorts the arriving Ethernet frames to a matrix and calculates
column and line sum. The size of the matrix can be determined
in the web GUI and is decisive for the additional overhead of the
FEC packets. The “weakest” FEC is able to correct up to 5 missing
or corrupt frames in series and produces an overhead of 11% including RTP. RTP is mandatory to set-up an FEC, so both features
belong together. In ASTRO IP receiving and transmitting devices
RTP and FEC is included without additional license fees.
4
Base units and modules at a glance
Type
Description
Page
U 100-230
Base unit for mounting up to 3 modules of the U 1xx series
Input voltage 230 V AC in connection with the U 100-SNT power supply unit
14
U 100-48
Base unit for mounting up to 3 modules of the U 1xx series
Input voltage - 48 V DC
14
U 100-C
Management-system for U 100 base units and signal converters
15
U 144
DVB-S2 to IP streamer
4-way converter, 4 standard DVB-S2 input signals via 4 input jacks into 4 IP multicast groups with 4 CI slots
16
U 148
DVB-S2 in IP streamer
8-way converter, 8 standard DVB-S2 input signals via 4 input jacks into 8 IP multicast groups
18
U 149
DVB-S2 in IP streamer
8-way converter, 8 standard DVB-S2 input signals via 4 input jacks into 8 IP multicast groups; APSK support
18
U 164
DVB-C, DVB-T or DVB-T2 to IP streamer
4-way converter, 4 standard DVB-C, DVB-T or DVB-T2 input signals via 4 input jacks into 4 IP multicast groups with 4 CI slots
20
U 168
DVB-C, DVB-T or DVB-T2 to IP streamer
8-way converter, 8 standard DVB-C, DVB-T or DVB-T2 input signals via 4 input jacks into 8 IP multicast groups, FTA
22
U 116
IP to PAL converter with MPEG 4 support (H.264/AVC Level 4.1 HP), HD to SD downscaling, optional AC-3
4-way converter, 4 IP multicast groups to 4 standard PAL programmes
24
U 118
IP to PAL converter with MPEG 4 support (H.264/AVC Level 4.1 HP), HD to SD downscaling, optional AC-3
8-way converter, 8 IP multicast groups to 8 standard PAL programmes
24
IP to PAL converter with MPEG 4 support (H.264/AVC Level 4.1 HP), HD to SD downscaling
8-way converter, 8 IP multicast groups to 8 standard PAL programmes
24
U 124
IP to FM converter
16-way converter, 4 IP multicast groups to 2 x 8 standard FM programmes
26
U 125
IP to FM converter
40-way converter, 16 IP multicast groups to 2 x 20 standard FM programmes
26
U 158
IP to QAM converter
8-way converter, 8 IP multicast groups to 8 standard QAM channels
28
IP to QAM converter
64-way converter, 64 IP multicast groups to 64 QAM channels
30
U 160
IP to DVB-C converter
24-way converter, 24 IP multicast groups to 2 DVB-C2 systems
32
U 174
IP to COFDM converter
4-way converter, 4 IP multicast groups to 4 standard COFDM channles
34
U 194
IP to IP descrambler
4-way descrambler, 4 transport streams, multi-service-descrambling, 4 CI slots
36
U 261
IP / ASI Gateway
Conversion of up to 16 multicast groups into up to 16 DVB ASI outputs, 230 V input voltage
40
U 261 i
IP / ASI Gateway
Conversion of up to 16 multicast groups into up to 16 DVB ASI outputs, 48 V input voltage
40
U 262
ASI / IP Gateway
Conversion of up to 16 DVB ASI inputs into up to 16 multicast groups, 230 V input voltage
40
U 262 i
ASI / IP Gateway
Conversion of up to 16 DVB ASI inputs into up to 16 multicast groups, 48 V input voltage
40
U 901
Active combining network
combining of up to 8 base units; trims installation version (VZN 8) available
42
U 960
Passive combining network
distribution of input signals in the frequency range 5 to 1000 MHz
43
Active SAT splitters
2 SAT-inputs into 8 outputs at a time or 1 SAT-input into 16 outputs
44
Carrier Class Edge Technology
U 118-x
U 159
NEW
NEW
IP Gateways
Active and passive combining
Professional SAT distribution
U 911 - 946
5
Why choose the U 100 series?
A modular built IP head-end concept for any demand
The U 100 Edge series has been developed on the basis
of many years of experience gained from the operation of
IP head-ends for processing CATV signals from IP data
streams.
The series is based on a hardware model which is completely new from the ground up. The experience, gained
in major IP content over IP projects, enabled ASTRO to
consider operating conditions in large IP backbone networks.
6
Thus, in addition to outstanding transmission parameters,
the U 100 series also offers sophisticated redundancy
and replacement switching mechanisms to reach the
greatest possible signal performance availability.
Easy configuration / operation
Easy installation
zz user friendly configuration via web browser no proprietary software needed for managing the system
zz easy mounting of the base unit in 19 inch cabinets
zz consistant menu structure of configuration interface for each module
zz LEDs indicate operation and errors on each
module
zz passive backplane enables a quick exchange of the signal converters
zz all active components integrated into the signal
converters
zz wiring remains unaffected, even if different types
of converters will be used
Maximum reliability
zz redundant power supply
zz short down-time in case of malfunction: every
module has redundant network interfaces
for network management and dataconnection
zz effective redundancy switching options in case of link failure, source failure or device failure
zz 2 data ports per signal converter
zz IGMPv3, RTP and FEC without additional license fees
High end performance
Easy service handling
zz three plug-in modules per 19 inch heigth provide high signal density
zz HOT SWAP service
zz compact design allows easy spare part handling
zz signal converters offer outstanding signal
parameters by Direct Digital ® zz Log file output via web interface
zz low power consumption per channel
zz Remote access to your U 100 head-end by ASTRO support team
How do updates work and what are
the costs for updates?
All major features of the ASTRO U 100 series are
included. Features like UDP/RTP and FEC at the
IP receiving side are included as well as programmable time-sharing of output channels and information ticker for PAL programs. These are some
examples. The only feature with additional costs is
the transport stream analyzer.
In general, updates are available on the ASTRO
firmware server. These updates can be downloaded to a local computer and then an update can
be started. The update file might also be stored on
the U 100-C management module and the firmware
will be uploaded directly or time-controlled to the
module. The third possibility is the download via
FTP server directly to the module. Standard firmware updates are free-of-charge. Those standard updates include bug fixes or general improvements
of the firmware.
FAQ
Are there any features with additional license costs?
7
U 100 base units
The U 100 base unit serves as the chassis for the various
signal converters, providing space for three signal converters and two power supply units within a single rack unit.
Each slot is equipped with a temperature-controlled fan
and the replaceable rear panel offers two management
and two data ports as well as the output of the CATV signals via two F sockets.
Status display for slots
L = left
M = middle
R = right
P = power supply
Order no.: 380 101 (for U 100-230)
Data ports
Connectors on the rear side (U 100-230)
RF outputs
Fan
Power supply
Management ports
Mains supply (U 100-230)
Grounding connection
Mains supply (U 100-230)
The U 100-SNT power supply unit
The U 100-SNT power supply is required to operate the
U 100-230 base unit. Minimum one power supply is needed, while two U 100-SNT enable a redundant supply of
the base unit and are recommended to avoid signal loss
due to mains power failures.
Order no.: 380 102
Base unit for 48 V power supply
The U 100 base unit is also available for -48 V DC power supply. In this case the redundant power supply can
be provided by a battery system or any other 48 V power
supply unit and no further power supply units are needed
inside the U 100-48 base unit.
Order no.: 380 100 (for U 100-48)
U 960 combining network
For distribution of input signals ASTRO offers a 19 inch
rack device with individual mounting subject to customer
request. It is available with 16 or 28 inputs and can be
assembled with 2-way, 3-way, 4-way or 8-way splitter.
Order no.: 380 179 (16 inputs); 380 198 (28 inputs)
8
Module backplanes
(varies depending
on module type)
Modules of the U 100 series
The ASTRO IP head-end modules handle all output signals
distributed in standard CATV networks: QAM, PAL, COFDM and FM. Based on the proven DirectDigital ® system,
all the signal converters provide outstanding parameters.
For generating IP signals, different types of IP streamers
are available. These are equipped with DVB-S2 or DVB-C/
T2 frontends and offer high signal density.
Easy front panel operation
IP front end included
One special feature of the signal converters is the inclusion of the IP frontend in each slide-in module. Consequently, each module has its own independent IP receiver unit
and operates separately from the other modules inside the
base unit. In this way, it is possible to limit any failure of
an IP frontend to only a single module, meaning that the
effects of an error are far less serious compared to a system which has only a single IP interface shared by all the
signal converters.
Control and data wheel, menu switch
Display of management IP addresses,
data IP addresses, status messages, etc.
Configuration kept safe on SD card
System parameters are stored on SD card. If the signal
converter must be replaced, the SD card plugged into
the old module can now be inserted in the new module,
allowing the previous configuration to be automatically migrated. Thanks to this feature, the spare equipment can
be set in operation quickly on site without any need for
service staff to reconfigure the system.
Why are there so many IP interfaces for
each signal converter?
There are different alignments of output signals depending on
the type of modulator. The U 116 IP to PAL and U 174 IP to COFDM converters offer 4 output channels transmitted in 2 pairs via
2 F-female outputs. The difference between start and stop frequency in one pair of output channels can be 32 MHz, or with
other words: 2 channels can be left unused between two output
channels. The U 118 IP to PAL and U 158 IP to QAM converter
offer 8 output channels transmitted in 2 quartets via 2 F-female
outputs. Those 4 channels per output have to be adjacent channels. An independent processing of the output channels is possible with the U 124 IP to FM converter but via 2 F-female outputs.
The ASTRO U 100 series offers several physical interfaces to enable all possible redundancy mechanisms and to configure different receive paths. To reduce the impact of a lost input signal to a
minimum, redundant data interfaces are mandatory. For different
concepts of remote access it is also necessary to provide redundant management interfaces. These interfaces can be used, but
they don’t have to be used. The disadvantage of a slightly more
time-consuming cabling effort can be neglected, compared to the
benefit of high signal stability and different remote access options.
What is the field of application for the
output channel filter?
Can I use different types of signal converters in one base unit?
Any modulator causes broadband noise, no matter how sophisticated the hard- and software is designed. Especially if a huge
number of output channels shall be combined, this broadband
IPcombined
> 4 x IP output. To cut off this noise,
noise accumulates4atxthe
the optional output channel filter can be installed to the signal
converter. This leads to a significant improvement of the S/N at
the combined output. The ASTRO modulators have one separate signal path to lead the signal via the channel output filter, this
means that the modulator stays fully frequency agile.
Any type of U 100 series signal converter can be used in the U
100-230 or U 100-48 base unit. They can be operated in any mixture without limitations. The only thing to be considered is the type
of backplane which is installed to the corresponding slot. The
backplane is part of the delivery of any signal converter.
FAQ
What is the output alignment in the different converters with CATV output?
9
Menu items o
zz Inventory report
zz Configuration
Programming? - It‘s easy!
You can handle the configuration of your U 100 head-end comfortably via the web browser interface of your PC or Laptop without installation of proprietary programming software. Just
connect your computer to the network jack of the module you
want to set up. Then type the IP address of the module into your
browser to show up the web page needed for configuration.
Aside from configuration purposes you can also easily handle
a lot of different tasks concerning control and maintenace of
many functions.
10
zz Log file
zz Module settings
zz Network / Rack
zz Replace
zz Schedule
zz SNMP
zz Time
Menu items of IP converters
Menu items o
zz IP receivers
zz RF input signals
zz RF output signals
zz IP transmitter
zz TS analyzer (optional)
zz TS analyzer (optional)
zz Licensing
zz Licensing
zz System log settings
zz System log settings
zz Active alarm table (overview of current errors)
zz Active alarm table
zz Statistics
zz Statistics
zz Network adjustments
zz Network adjustments
zz Test generator
zz Test generator
Configuration and maintenance
Everything under control
The structure of the web GUI is nearly the same for each module of the U 100 series. If you are experienced in using one
module‘s programming interface you will easily operate the
others as well. Only the modulator settings differ from each
other. The IP settings are strictly seperated from modulator
settings and also management tasks are located in seperate
submenus. The clear arrangement of the menus enable the
operator to configure all necessary parameters without hassle.
f controller
The U series is integrated to all relevant management systems.
Common menu items
zz Log-In / -Out
zz Status overview (of current adjustments)
zz Overview of main settings
zz Software update / Configuration files
zz User administration
f streamers
Menu items of descrambler
zz IP receivers
zz IP transmitters
)
zz TS analyzer (optional)
zz Licensing
zz System log settings
(overview of current errors)
zz Active alarm table (overview of current errors)
zz Statistics
zz Network adjustments
zz Test generator
11
The U 100 redundancy concept
The U 100 series offers all possible redundancy options like link redundancy, source redundancy and device
redundancy. Want maximum reliability? - Choose the U 100 series and you‘ll get it!
Link redundancy
zz Requirement for real link redundancy are two
independent data interfaces.
zz If one signal feed fails, the redundant data interface must take over the operation.
zz ASTRO U 100 series devices offer fully redundant data interfaces, independently configurable.
zz Switching between interfaces can be done
manually or automatically with configurable priorities.
zz The redundant signals can be configured in hot stand-by or cold stand-by.
zz Thanks to the link redundancy concept every device and link in-between the master head-end and the regional haed-end is covered.
zz In case of hot stand-by, the redundant link and source is monitored permanently to ensure an
error-free operation after switching over.
Source redundancy
zz Requirement for source redundancy are at least
two independently configurable IP receivers per data interface.
zz If the primary signal source fails, the IP receiver must
listen immediately to the secondary source.
zz ASTRO U 100 series devices even offer three (!) configurable IP receivers per data interface.
zz This enables the operator to have two sources
feeding the backbone and one local source for emergencies.
zz The redundant signal sources can be configured in hot stand-by or cold stand-by.
zz In case of hot-stand-by, the redundant link and source is monitored permanently to ensure an
error-free operation after switching over.
12
Backbone
Backbone direction A
Device redundancy
zz Requirement for device redundancy is spare equipment
inside the working head-end and the U 100-C controller.
zz This spare equipment must be connected to the same signal
sources like the working equipment.
zz A device is considered as spare equipment by the controller if the RF ports are switched off.
Backbone direction B
zz The switching-over to the spare equipment can be made
manually or automatically in case of certain events.
working U 100 module
Primary source
redundant U 100 module
direction A
Secondary source
13
Base units
FOR MOUNTING U 100 MODULES
U 100
Backside of U 100, 230 V version:
zz power and signal supply for modules of the
U 100 series
zz can carry up to 3 modules of the U 100 series
zz output signals are seperately led out via
F-jacks
zz optional redundant power supply available
zz status indication for signal converters and power supply units
Backside of U 100, 48 V version:
zz horizontal air flow allows compact installation
It is mandatory to use guide rails in the 19 inch rack. As these guide rails are different for each 19 inch rack supplier,
they are not in the scope of delivery of U 100 base units.
Type
U 100 - 48
Order number
EAN-Code
U 100 - 230
380 100
380 101
4026187611064
4026187611149
Common data
Voltage supply
[V]
Power consumption
[W]
Dimensions
Ambient temperature
14
- 48 DC
110…240 ~ +/- 10% AC
depends on number of modules assembled
19" / 1 HE
[°C]
0…+45
Management controller module
SYSTEM MANAGEMENT FOR U 100 SIGNAL PROCESSORS
U 100-C
zz for comprehensive system management of
the U 100 series signal converters
zz provides many functions for configuring and
servicing the U 100 series
zz management of the complete head end via one
IP address
zz comfortable rack view with status display of all
installed U 1xx components
zz user friendly configuration via web browser
interface
zz monitored fan
Backplane:
The U 100-C is an overall management system for the U 100 series with many interesting features for network operators. It features a comfortable rack view of the complete system, time controlled updates and it can initiate automatic
redundancy switching in case of malfunctions.
Type
U 100-C
Order number
380 103
EAN-Code
4026187131739
Network interfaces (passive routing to U 1xx)
Protocol
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP, IGMPv3
Common data
Power consumption
[W]
Dimensions
Ambient temperature
27
19´´, 1 HE
[°C]
0…+45
15
Streamer modules
SIGNAL PROCESSING: DVB-S2  IP
U 144
4 x DVB-S2 to IP, up to 4 DVB-S2 transponders
without front cover
zz plug-in module for U 100 base unit
zz 4 physical signal input jacks
zz for processing of 4 DVB-S2 signals into
IP multicast groups (4 MPTS, 504 SPTS)
zz up to 4 DVB-S2 transponders
Backplane:
zz up to 12 streams per rack unit
zz 4 cascadable CI slots with multi channel
decoding
zz tuners with DiSEqC control
zz monitored fan
BLOCK DIAGRAM
4 streams
16
Signal Switch
DVB-S2 Tuner
CI with MCD
DVB-S2 Tuner
CI with MCD
DVB-S2 Tuner
CI with MCD
DVB-S2 Tuner
CI with MCD
Reception
Descrambling
Transportstream
Encapsulation
IEEE 802.3
IP / UDP / RTP
FEC
Encapsulation
1000 BaseT
Data A
1000 BaseT
Data B
Streaming
Management
100 BaseT
Mgmt A
100 BaseT
Mgmt B
HD
TV
4
CI
QUAD
Type
U 144
Order number
380 144
EAN-Code
4026187170745
Number of DVB-S2 input signals
4
Number of DVB-S2 transponders
4
Number of IP output streams
4 MPTS, 504 SPTS
Interfaces
Management
2 x 100 Base-T Ethernet (RJ 45)
Data
2 x 1000 Base-T Ethernet (RJ 45)
Protocols
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP, IGMPv3
Transportstream Encapsulation
Protocols
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
Bytes
188 / 204
DVB-S demodulator
DVB-S modulation
QPSK; 8PSK
Input frequency range
[MHz]
Input level
950 - 2150
[dBµV]
40 - 80
SAT-IF input
[Ω]
75, F-jack
Reflection loss
[dB]
≥ 10
[MS/s]
max. 45,0 (depends on DVB-S2 Modulation)
Input symbol rate
DVB-S Roll-off-factors
0,20;0,25;0,35
DVB-S LDPC
1/2; 1/3; ¼; 2/3; 2/5; 3/5; 4/5; 5/6; 8/9; 9/10 (depends on DVB-S2 Modulation)
Viterbi decoding
(according DVB standard)
1/2; 2/3; 3/4; 5/6; 7/8; automatically / manually

DiSEqC Control
CI interfaces
CI slots
Supported modules
4 x (front access)
Alphacrypt, Aston Conax, Dreamcrypt, Entavio CAM, GkWare BISS CAM, Homecast CAM, ICECrypt, Ideto Access, Kid CAM,
excerpt (others on
Mascom Cryptoworks, Matrix CAM, Mediaguard Canal Digitaal, Nagravision, Oasis CAM, PCMCIA CAm, Premiere, Worldcam,
request)
TechniCam Beta2, Technicrypt, TPS, Reality CAM, SMiT, Universal CAM, Viaccess, Videoguard CAM
Connectors
4 x PCMCIA
RF inputs
Connectors
Ω
75, 4 x F-jack
Current consumption at 48 V
mA
530
Power consumption at 36 - 60 V
W
25
Input voltage
V
Common data
Dimensions
Ambient temperature
36 - 60
1 HU, 19 inch
°C
0 … +45
17
Streamer modules
SIGNAL PROCESSING: DVB-S2  IP
U 149
4 x DVB-S2 to IP, up to 8 DVB-S2 transponders, APSK support
zz plug-in modules for U 100 base unit
zz 4 physical signal input jacks
zz for processing of 8 DVB-S2 signals into
IP multicast groups (8 MPTS, 504 SPTS)
zz up to 24 streams per rack unit
zz only U 149: APSK support
zz tuners with DiSEqC control
zz monitored fan
Backplane:
U 148
4 x DVB-S2 to IP; up to 8 DVB-S2 transponders
BLOCK DIAGRAM
U 148, U 149:
8 streams
DVB-S2 Tuner
DVB-S2 Tuner
DVB-S2 Tuner
Transportstream
Encapsulation
DVB-S2 Tuner
DVB-S2 Tuner
DVB-S2 Tuner
DVB-S2 Tuner
DVB-S2 Tuner
Signal Switch
18
Reception
IEEE 802.3
IP / UDP / RTP
FEC
Encapsulation
1000 BaseT
Data A
1000 BaseT
Data B
Streaming
Management
100 BaseT
Mgmt A
100 BaseT
Mgmt B
HD
TV
8
OCTO
Type
Order number
EAN-Code
U 148
U 149
380 148
380 149
4026187170752
4026187191948
Number of DVB-S2 input signals
4
4
Number of DVB-S2 transponders
8
8
Number of IP output streams
8 MPTS, 504 SPTS
Interfaces
Management
2 x 100 Base-T Ethernet (RJ 45)
Data
2 x 1000 Base-T Ethernet (RJ 45)
Protocols
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP, IGMPv3
Transportstream Encapsulation
Protocols
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
Bytes
188 / 204
DVB-S demodulator
DVB-S modulation
QPSK; 8PSK
QPSK; 8PSK; 16APSK; 32APSK
Input frequency range
[MHz]
950 - 2150
Input level
[dBµV]
40 - 80
SAT-IF input
[Ω]
75, F-jack
Reflection loss
[dB]
≥ 10
[MS/s]
max. 45,0 (depends on DVB-S2 Modulation)
Input symbol rate
DVB-S Roll-off-factors
0,20;0,25;0,35
DVB-S LDPC
1/2; 1/3; ¼; 2/3; 2/5; 3/5; 4/5; 5/6; 8/9; 9/10 (depends on DVB-S2 Modulation)
Viterbi decoding
(according DVB standard)
1/2; 2/3; 3/4; 5/6; 7/8; automatically / manually

DiSEqC Control
RF inputs
Connectors
Ω
75, 4 x F-jack
Common data
Current consumption at 48 V
mA
580
Power consumption at 36 - 60 V
W
28 per module
Input voltage
V
36 - 60
Dimensions
Ambient temperature
1 HU, 19 inch
°C
0 … +45
19
Streamer modules
SIGNAL PROCESSING: DVB-C / DVB-T / DVB-T2  IP
4 x DVB-C, DVB-T or DVB-T2 to IP
U 164
without front cover
zz plug-in module for U 100 base unit
zz 2 physical signal input jacks
zz for processing of 4 DVB-CT2 signals into
IP multicast groups (8 MPTS, 504 SPTS)
zz up to 12 streams per rack unit
Backplane:
zz DiSEqC support
zz monitored fan
BLOCK DIAGRAM
4 streams
20
Signal Switch
DVB-CT2 Tuner
CI with MCD
DVB-CT2 Tuner
CI with MCD
DVB-CT2 Tuner
CI with MCD
DVB-CT2 Tuner
CI with MCD
Reception
Descrambling
Transportstream
Encapsulation
IEEE 802.3
IP / UDP / RTP
FEC
Encapsulation
1000 BaseT
Data A
1000 BaseT
Data B
Streaming
Management
100 BaseT
Mgmt A
100 BaseT
Mgmt B
HD
TV
4
CI
QUAD
Type
U 164
Order number
380 164
EAN-Code
4026187170769
Number of DVB-CT2 input signals
4
Number of DVB-CT2 tuners
8
Number of IP output streams
4 MPTS, 504 SPTS
Interfaces
Management
2 x 100 Base-T Ethernet (RJ 45)
Data
2 x 1000 Base-T Ethernet (RJ 45)
Protocols
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP, IGMPv3
Transportstream Encapsulation
Protocols
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
Bytes
188 / 204
[Mbaud]
0,5 - 7
DVB-C demodulator
Input data rate
Modulation modes (accord. DVB-standard)
QPSK, QAM16, QAM32, QAM64, QAM128, QAM256
DVB-T demodulator / DVB-T2 demodulator
Modulation
DVB-T: 4-, 16-, 64-QAM
Guardinterval
DVB-T: 1/4; 1/8; 1/16; 1/32
DVB-T2: 1/4; 5/32; 1/8; 5/64; 1/16; 1/32; 1/64; 1/128
FEC
DVB-T: 1/2; 2/3; 3/4; 5/6; 7/8
DVB-T2: 1/2; 3/5; 2/3; 3/4; 4/5; 5/6
FFT-Mode
DVB-T: 2k, 8k
DVB-T2: 1k, 2k, 4k, 8k, 16k, 32k
DVB-T: 6; 7; 8
DVB-T2: 5; 6; 7; 8
Bandwidth
[MHz]
Remote voltage supply
DVB-T2: 4-, 16-, 64-, 256-QAM
5V, typ. 100mA, switchable
CI interfaces
CI slots
Supported modules
4 x (front access)
Alphacrypt, Aston Conax, Dreamcrypt, Entavio CAM, GkWare BISS CAM, Homecast CAM, ICECrypt, Ideto Access, Kid CAM,
excerpt (others on
Mascom Cryptoworks, Matrix CAM, Mediaguard Canal Digitaal, Nagravision, Oasis CAM, PCMCIA CAm, Premiere, Worldcam,
request)
TechniCam Beta2, Technicrypt, TPS, Reality CAM, SMiT, Universal CAM, Viaccess, Videoguard CAM
Connectors
4 x PCMCIA
RF inputs
Connectors
Ω
75, 4 x F-jack
Current consumption at 48 V
mA
590
Power consumption at 36 - 60 V
W
28,5 per module
Input voltage
V
36 - 60
Common data
Dimensions
Ambient temperature
1 HU, 19 inch
°C
0 … +45
21
Streamer modules
SIGNAL PROCESSING: DVB-C / DVB-T / DVB-T2  IP
U 168
8 x DVB-C, DVB-T or DVB-T2 to 8 x IP
zz plug-in module for U 100 base unit
zz 2 physical signal input jacks
zz for processing of 8 DVB-CT2 signals into
IP multicast groups (8 MPTS, 504 SPTS)
zz up to 24 streams per rack unit
zz DiSEqC support
zz monitored fan
Backplane:
8 streams
BLOCK DIAGRAM
DVB-CT2 Tuner
DVB-CT2 Tuner
DVB-CT2 Tuner
DVB-CT2 Tuner
DVB-CT2 Tuner
DVB-CT2 Tuner
DVB-CT2 Tuner
DVB-CT2 Tuner
Signal Switch
22
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Transportstream
Encapsulation
IEEE 802.3
IP / UDP / RTP
FEC
Encapsulation
1000 BaseT
Data A
1000 BaseT
Data B
Streaming
Management
100 BaseT
Mgmt A
100 BaseT
Mgmt B
HD
TV
8
OCTO
Type
U 168
Order number
380 168
EAN-Code
4026187170776
Number of DVB-CT2 input signals
4
Number of DVB-CT2 tuners
8
Number of IP output streams
8 MPTS, 504 SPTS
Interfaces
Management
2 x 100 Base-T Ethernet (RJ 45)
Data
2 x 1000 Base-T Ethernet (RJ 45)
Protocols
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP, IGMPv3
Transportstream Encapsulation
Protocols
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
Bytes
188 / 204
[Mbaud]
0,5 - 7
DVB-C demodulator
Input data rate
Modulation modes (accord. DVB-standard)
QPSK, QAM16, QAM32, QAM64, QAM128, QAM256
DVB-T demodulator / DVB-T2 demodulator
Modulation
DVB-T: 4-, 16-, 64-QAM
Guardinterval
DVB-T: 1/4; 1/8; 1/16; 1/32
DVB-T2: 1/4; 5/32; 1/8; 5/64; 1/16; 1/32; 1/64; 1/128
FEC
DVB-T: 1/2; 2/3; 3/4; 5/6; 7/8
DVB-T2: 1/2; 3/5; 2/3; 3/4; 4/5; 5/6
FFT-Mode
DVB-T: 2k, 8k
DVB-T2: 1k, 2k, 4k, 8k, 16k, 32k
DVB-T: 6; 7; 8
DVB-T2: 5; 6; 7; 8
Bandwidth
[MHz]
Remote voltage supply
DVB-T2: 4-, 16-, 64-, 256-QAM
5V, typ. 100mA, switchable
RF inputs
Connectors
Ω
75, 2 x F-jack
Current consumption at 48 V
mA
710
Power consumption at 36 - 60 V
W
34 per module
Input voltage
V
36 - 60
Common data
Dimensions
Ambient temperature
1 HU, 19 inch
°C
0 … +45
23
Signal converters with IP front end
SIGNAL PROCESSING: IP  PAL / NTSC
4 x IP to 4 x PAL / SECAM / NTSC with MPEG 4 support (H.264/AVC Level 4.1 HP)
U 116
zz plug-in module for U 100 base unit
zz U 118: for processing of up to 8 IP multicast
groups of a Gigabit Ethernet MPEG TS in
8 standard PAL programmes
zz U 116: for processing of up to 4 IP multicast
groups of a Gigabit Ethernet MPEG TS in
4 standard PAL programmes
zz PAL programmes are led through as two
pairs of adjacent channels
Backplane:
zz outstanding signal parameters by
Direct Digital technology (Video-S/N: typ.
66 dB; residual carrier accuracy: 1 %)
zz optionally available output channel filters
(U-KF) allow for maintaining the high sigal quality even after combining
zz user friendly configuration via web browser
zz monitored fan
NEW
U 118-x
U 118
as U 118 but PAL modulator with
2 x 4 channels on 80 MHz bandwidth
8 x IP to 8 x PAL / SECAM / NTSC with
MPEG 4 support (H.264/AVC Level 4.1 HP)
BLOCK DIAGRAM
U 116:
Data A
1000 BaseT
Data B
1000 BaseT
Receiving
Management
Mgmt A
100 BaseT
Mgmt B
100 BaseT
Transportstream
Decapsulation
MPEG Decoder
IEEE 802.3
IP / UDP / RTP
FEC
MPEG Decoder
Decapsulation
U 118 and U 118-x with 8 IP inputs and 8 PAL output signals
24
PAL
Modulator
2 x PAL
MPEG Decoder
PAL
Modulator
2 x PAL
Decoding
PAL Modulation
MPEG Decoder
HD
TV
4
8
QUAD
OCTO
Type
U 116
U 118
U 118-x
380 117
380 122
380 127
4026187141059
4026187191955
4026187192815
Maximum number of IP input signals
4
8
8
Maximum number of PAL output signals
4
8
8
Order number
EAN-Code
Network interfaces (passive routing to U 1xx)
Management
2 x 100 Base-T Ethernet (RJ 45)
Data
2 x 1000 Base-T Ethernet (RJ 45)
Protocol
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP, IGMPv3
Transport stream editing
TS Decapsulation
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
[Bytes]
188 / 204
Decoding
Video
H.264/AVC Level 4.1 HP, MPEG-2 MP@HL
Audio
MPEG-1/2 Layer 1/2, (HE-)AAC, AC-3* / Dolby Digital (Plus) optional
Data
Teletext, VPS, WSS, Teletext subtitles, DVB Subtitling
PAL modulator
Connectors
[Ω]
75, 2 x F-jack
47 - 862, digital modulation,
2 x 4 channels on 80 MHz bandwidth
Frequency range
[MHz]
47 - 862, digital modulation
Output level
[dBμV]
Return loss
[dB]
≥ 14
Spurious frequency dist.
[dB]
≥ 60
Stereo cross talk
[dB]
> 55
Residual carrier accuracy
[%]
1
118
TV standard
Video-signal to noise ratio
112
PAL B/G, D/K, M, N, SECAM, SECAM L, A2/NICAM, NTSC mono
[dB]
typ. 65
typ. 63
Current consumption at 48 V
mA
660
830
Power consumption at 48 V
W
32 per module
40 per module
Input voltage
V
Common data
Dimensions
Ambient temperature
48
1 HU, 19 inch
°C
0 … +45
*) AC-3 only supported by U 116 (AC-3), order number: 380 118; U 118 (AC-3), order number 380 123 and U 118-x (AC-3), order number 380 128
25
Signal converters with IP front end
SIGNAL PROCESSING: IP  FM
U 125
4 x IP to 2 x 20 FM programmes
zz plug-in module for U 100 base unit
zz U 124: for processing of up to 4 IP multicast
groups of a Gigabit Ethernet MPEG TS into
2 x 8 standard FM programmes
zz U 125: for processing of up to 16 IP multicast
groups of a Gigabit Ethernet MPEG TS
into 2 x 20 standard FM programmes
Backplane:
zz FM programmes are led through as two
groups consisting of 8 programmes
zz outstanding signal parameters by
Direct Digital technology
zz static and dynamic RDS are supported
(radiotext, PTY, PS and CT) zz user friendly configuration via web browser
zz monitored fan
U 124
4 x IP to 2 x 8 FM programmes
BLOCK DIAGRAM
U 124:
Data A
1000 BaseT
Data B
1000 BaseT
Receiving
Management
Mgmt A
100 BaseT
Mgmt B
100 BaseT
U 125: 2 x 20 FM programmes
26
Transportstream
Decapsulation
MPEG Decoder
IEEE 802.3
IP / UDP / RTP
FEC
MPEG Decoder
Decapsulation
FM
Modulator
8 x FM
MPEG Decoder
FM
Modulator
8 x FM
Decoding
FM Modulation
MPEG Decoder
Type
U 124
Order number
EAN-Code
U 125
380 124
380 125
4026187611118
4026187191337
Network interfaces (passive routing to U 1xx)
Management
2 x 100 Base-T Ethernet (RJ 45)
Data
2 x 1000 Base-T Ethernet (RJ 45)
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP,
SNTP, IGMPv3
Protocol
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP,
IGMP, SSL, RADIUS
Transport stream editing
Decapsulation
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
[Bytes]
transparent (188 oder 204 packets)
Decoding
Input signal
4 x MPEG-2 TS
16 x MPEG-2 TS
Audio
MPEG 1 Layer 2, Stereo
FM modulator
Connectors
2 x F-jack
Output signal
Output frequency
2 x 8 FM stereo channels with RDS
[MHz]
87,5 - 108, digital modulated, 10 kHz steps
static
dynamic
Output level
2 x 20 FM stereo channels with RDS
TP / PI / PS 8 x 8 signs
Pi / Radiotext / PTY / PS / CT / MS
[dBμV]
114
Intermodulation distance
[dBc]
> 60
60 @ 114 dbμV; 65 @ 112 dbμV
Return loss
[dB]
> 14
> 18
Signal to noise ratio
[dB]
> 64
> 65
Unweighted signal to noise ratio
[dB]
> 70
Preemphasis
[μs]
50
Stereo cross talk attenuation
[dB]
60
Harmonic factor
[%]
< 0,05
Frequency range
[dB]
<1
Common data
Current consumption at 48 V
mA
680
920
Power consumption at 36 - 60 V
W
25,5 per module
39 per module
Input voltage
V
Dimensions
Ambient temperature
36 - 60
1 HU, 19 inch
°C
0 … +45
27
Signal converters with IP front end
SIGNAL PROCESSING: IP  QAM
8 x IP to 8 x QAM
U 158
zz plug-in module for U 100 base unit
zz for processing of up to 8 IP multicast groups
of a Gigabit Ethernet MPEG TS in
8 standard QAM channels
zz QAM channels programmes are led through
as four adjacent channels
zz outstanding signal parameters by
Direct Digital technology
zz NIT and LCN processing integrated
zz optionally available output channel filters
(U-KF) allow for maintaining the high signal
quality even after combining zz user friendly configuration via web browser
zz monitored fan
BLOCK DIAGRAM
Backplane:
28
Data A
1000 BaseT
Data B
1000 BaseT
Receiving
Management
Mgmt A
100 BaseT
Mgmt B
100 BaseT
Transportstream
Decapsulation
IEEE 802.3
IP / UDP / RTP
FEC
Decapsulation
QAM
Modulator
4 x QAM
QAM
Modulator
4 x QAM
TS Processor
TS Processing
QAM Modulation
HD
TV
8
OCTO
Type
U 158
Order number
380 158
EAN-Code
4026187131852
Network interfaces (passive routing to U 1xx)
Management
2 x 100 Base-T Ethernet (RJ 45)
Data
2 x 1000 Base-T Ethernet (RJ 45)
Protocol
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP, IGMPv3
Transport stream editing
TS capsulation
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
[Bytes]
188 / 204
QAM modulator
Modulation
16-, 32-, 64-, 128-, 256-QAM
Signal processing
Spectrum shape (cos-roll-off)
according DVB standard
[%]
FEC
15
Reed-Solomon (204, 188)
Data rate adjustment

PCR-correction


NIT-handling, PID-remapping
Output symbol rate
[Msymb/s]
3,45 - 7,5 (for 2 adjacent channels)
Bandwidth
[MHz]
4 - 8 depending on output symbol rate
Brutto data rate
[Mbit/s]
55,2
MER (Equalizer)
[dB]
≥ 44
HF modulator
Connectors
[Ω]
75, 2 x F-jack
Frequency range
[MHz]
47 - 862, digital modulation
Output level
[dBμV]
114
Return loss
[dB]
> 14
Spurious frquency distance
[dB]
> 60
Current consumption at 48 V
mA
680
Power consumption at 36 - 60 V
W
28 per module
Input voltage
V
36 - 60
Common data
Dimensions
Ambient temperature
1 HU, 19 inch
°C
0 … +45
29
Signal converters with IP front end
SIGNAL PROCESSING: IP  QAM
U 159
64 x IP to QAM
zz plug-in module for U 100 base unit
zz for processing of up to 64 IP multicast groups
of a Gigabit Ethernet MPEG TS into
64 QAM channels
NEW
zz 192 QAM channels in one 19 inch RU
zz QAM Annex A & B, RTP, FEC, IGMP, SNMP
zz each QAM channel frequency independent
zz outstanding signal parameters by
Direct Digital technology
zz user friendly configuration via web browser
zz monitored fan
Backplane:
BLOCK DIAGRAM
Data A
Data B
Data C
Data D
Gbit SFP
Gbit SFP
Gbit SFP
Gbit SFP
Receiving
Management
30
Mgmt A
100 BaseT
Mgmt B
100 BaseT
Transportstream
Decapsulation
IEEE 802.3
IP / UDP / RTP
FEC
Decapsulation
QAM
Modulator
64 x QAM
TS Processor
TP -20 dB
TS Processing
QAM Modulation
HD
TV
Type
U 159
Order number
380 159
Ean-Code
4026187192895
Network interfaces (passive routing to U 1xx)
Management
2 x 1000 Base-T Ethernet (RJ 45)
Data
4 x SFP
Protocol
Ethernet, RTP, ARP, IPv4, IPv6, TCP/UDP, HTTP(S), SNTP, IGMP, SNMP
Serial
1x RJ 45, 115200 kbit/s, 8N1
Transport stream editing
TS capsulation
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
[Bytes]
188
QAM modulator
Modulation
16-, 32-, 64-, 128-, 256-QAM
Signal processing
Spectrum shape (cos-roll-off)
according DVB standard, ITU.J83 Annex B
[%]
15, 13, 15, 18
Data rate adjustment

PCR-correction

PID Filtering / -remapping

NIT-Handling
static, NIT out of PID, dynamic
FEC
Reed-Solomon (204,188)-Code
Output symbol rate
[Msymb/s]
3,45 - 7,5
Bandwidth
[MHz]
1 - 7,14 depending on output symbol rate
Brutto data rate
[Mbit/s]
maximum 457
MER (Equalizer)
[dB]
≥ 44
Shoulder attenuation
[dB]
≥ 56
QAM demodulator for monitoring
Modulation
16-, 32-, 64-, 128-, 256-QAM
HF modulator
Connectors
[Ω]
75, 2 x F-jack
Frequency range
[MHz]
47 - 1006, digital modulation
Output level
[dBμV]
108 @ 64 channels
Return loss
[dB]
> 14
Spurious frquency distance
[dB]
> 60
Common data
Current consumption at 48 V
mA
830
Power consumption at 36 - 60 V
W
40 per module
Input voltage
V
36 - 60
Dimensions
Ambient temperature
1 HU, 19 inch
[°C]
0…+45
31
Signal converters with IP front end
SIGNAL PROCESSING: IP  DVB-C2
U 160
2 x IP to 2 x DVB-C2
zz plug-in module for U 100 base unit
zz for processing of up to 24 IP multicast groups
of a Gigabit Ethernet MPEG TS into
2 DVB-C2 systems
zz multiple transportstream
zz multiplexing of data slices
zz FEC: LDPC and BCH
zz OFDM modulation
zz 2 x 8 MHz / 1 data slice or 2 x 16 MHz /
3 data slices
zz RTP, IGMPv3
zz broadband notch placing
zz user friendly configuration via web browser
Backplane:
BLOCK DIAGRAM
zz monitored fan
32
Data A
1000 BaseT
Data B
1000 BaseT
Receiving
Management
Mgmt A
100 BaseT
Mgmt B
100 BaseT
Transportstream
Decapsulation
IEEE 802.3
IP / UDP / RTP
FEC
Decapsulation
DVB-C2
Modulator
TS Processor
DVB-C2
Modulator
TS Processing
C2 Modulation
Each output:
8 MHz
1 Dataslice
OR:
16 MHz
3 Dataslices
HD
TV
2
TWIN
Type
U 160
Order number
380 160
EAN-Code
4026187161088
Interfaces
Management
2 x 100 Base-T Ethernet (RJ 45)
Data
2 x 1000 Base-T Ethernet (RJ 45)
Protocols
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP, IGMPv3
Transportstream Encapsulation
Protocols
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
Bytes
188 / 204
DVB-C2 demodulator
Input interface
Transportstream
Coding Modes
static
FEC
LDPC, BCH
Interleaving
Bit, time and frequency
Modulation
OFDM
Bandwidth
MHz
Guard interval
16
1/64 or 1/128
Modulation schemes
16 QAM to 4096 QAM
FEC Frame
64 800 bits or 16 200 bits
Data Slices
1-3
Physical Layer Pipes
Single PLP per Data Slice
Narrowband Notches

Broadband Notches

RF modulator
Connectors
Ω
75, 2 x F-jack
Frequency range
MHz
47 - 862
RF output level
dBμV
114
Return loss
dB
> 14
Spurious frequency distance
dB
> 60
Current consumption at 48 V
mA
680
Power consumption at 36 - 60 V
W
28 per module
Input voltage
V
36 - 60
Common data
Dimensions
Ambient temperature
1 HU, 19 inch
°C
0 … +45
33
Signal converters with IP front end
SIGNAL PROCESSING: IP  COFDM
U 174
4 x IP to 4 x COFDM
zz plug-in module for U 100 base unit
zz for processing of up to 4 IP multicast groups
of a Gigabit Ethernet MPEG TS into
4 standard COFDM channels
zz COFDM channels are led through as two adjacent channels
zz outstanding signal parameters by Direct Digital technology (MER: ≥ 43 dB;
shoulder attenuation: ≥ 56 dB)
zz RTP, FEC, IGMPv3
zz optionally available output channel filters
(U-KF) allow for maintaining the high signal
quality even after combining
zz user friendly configuration via web browser
zz monitored fan
BLOCK DIAGRAM
Backplane:
34
Data A
1000 BaseT
Data B
1000 BaseT
Receiving
Management
Mgmt A
100 BaseT
Mgmt B
100 BaseT
Transportstream
Decapsulation
IEEE 802.3
IP / UDP / RTP
FEC
Decapsulation
COFDM
Modulator
2 x COFDM
COFDM
Modulator
2 x COFDM
TS Processor
TS Processing
COFDM Modulation
HD
TV
4
QUAD
Type
U 174
Order number
380 174
EAN-Code
4026187611026
Network interfaces (passive routing to U 1xx)
Management
2 x 100 Base-T Ethernet (RJ 45)
Data
2 x 1000 Base-T Ethernet (RJ 45)
Protocol
IEEE802.3 Ethernet, RTP, ARP, IPv4, TCP/UDP, HTTP, SNTP, IGMPv3
Transportstream editing
TS capsulation
Packet length
UDP, UDP / RTP, 1-7 packets, FEC
[Bytes]
188 / 204
COFDM modulator
COFDM Mode
2k
Carrier modulation
QPSK, 16-, 64-QAM
Bandwidth
[MHz]
6, 7, 8
Maximum brutto data rate
[Mbit/s]
31,668
Signal processing
accord. DVB standard
Coding rates
1/2, 2/3, 3/4, 5/6, 7/8
Guard intervals
1/4, 1/8, 1/16, 1/32
Data rate adjustment

PCR-correction (< 500 ns accord. DVB)

NIT-Handling (static)

PID Remapping

PID Filtering
Drop oder Pass PID-Filter
MER (Equalizer)
[dB]
≥ 43
Shoulder attenuation
[dB]
> 56 (< 700 MHz); > 54 (≥ 700 MHz)
HF modulator
Connectors
[Ω]
75, 2 x F-jack
Frequency range
[MHz]
47 - 862, digitaly modulated
Frequency deviation
[kHz]
< 10
Output level
[dBμV]
114
Intermodulation distance
[dB]
> 60
Return loss
[dB]
> 14
Spurious frequency distance
[dB]
> 60
Common data
Current consumption at 48 V
mA
680
Power consumption at 36 - 60 V
W
28 per module
Input voltage
V
36 - 60
Dimensions
Ambient temperature
1 HU, 19 inch
°C
0 … +45
35
Descrambler
SIGNAL PROCESSING: IP  IP
U 194
4 x IP to 4 x IP
without front cover
zz plug-in module for U 100 base unit
zz 4 CI-slots; independent / cascadable
zz 4 transport streams
zz Multi-Service-Descrambling
Backplane:
zz decryption level: service based, PID based
zz RTP, FEC, IGMPv3
zz user friendly configuration via web browser
36
1000 BaseT
Data B
1000 BaseT
Receiving
Management
Mgmt A
100 BaseT
Mgmt B
100 BaseT
Decapsulation
CI with MCD
CI with MCD
CI with MCD
CI with MCD
Descrambling
Transportstream
Encapsulation
Data A
Transportstream
Decapsulation
BLOCK DIAGRAM
zz monitored fan
Encapsulation
1000 BaseT
Data A
1000 BaseT
Data B
Streaming
HD
TV
4
CI
QUAD
Type
U 194
Order number
380 161
EAN-Code
4026187161095
Network data interfaces
Interface type
100FD/1000Base-T Ethernet IEEE 802.3
Prrotocol
IP v4, ARP, UDP, RTP, ICMP, IGMPv2
Connector
2 x 8p8C "RJ-45" (redundant)
TS Receiver
4 x (unicast / multicast)
TS Transmitter
4 x (unicast / multicast)
CI interfaces
CI slots
Supported modules
4 x (front access)
Alphacrypt, Aston Conax, Dreamcrypt, Entavio CAM, GkWare BISS CAM, Homecast CAM, ICECrypt,
excerpt (others on Ideto Access, Kid CAM, Mascom Cryptoworks, Matrix CAM, Mediaguard Canal Digitaal, Nagravision, Oasis CAM, PCMCIA CAm,
request)
Premiere, Worldcam, TechniCam Beta2, Technicrypt,
TPS, Reality CAM, SMiT, Universal CAM, Viaccess, Videoguard CAM
Connectors
4 x PCMCIA
Transportstream
TS encapsulation
UDP/IP, RTP/UDP/IP, FEC
TS type
MPTS
TS functionality
Receiver, decode, and transmit up to 4 MPTS via IP
Control and Management
Interface type
100FD/1000Base-T Ethernet IEEE 802.3
Features
Element control via HTTP/Web-GUI, SNMP traps for integration with network management systems (NMS),
software update via FTP or TFTP
Protocol
IP v4, ARP, UDP, TCP, ICMP, HTTP, SNMP v2c, FTP, TFTP, DNS, DHCP, SNTP
Connectors
2 x 8P8C "RJ-45" (redundant)
Common data
Current consumption at 48 V
mA
605
Power consumption at 36 - 60 V
W
24,3 per module
Input voltage
V
36 - 60
Dimensions
Ambient temperature
1 HU, 19 inch
°C
0 … +45
37
Gateways
The Video over IP solution
Maximum Flexibility in signal conversion
The ASTRO video over IP gateways offer the possibility to distribute up to 16 MPEG-transport streams with audio & video
data over an IP-backbone. The configuration of the gateways is achieved user friendly via a webbrowser interface.
Thanks to a licensing of the transport streams and further optional features (for example transport stream analyzer)
the distribution of investment costs can be tailored to the market’s needs. Forward Error Correction (FEC) according to
ProMPEG CoP and encapsulation of Ethernet frames with RTP are already integrated.
The display on the front shows the management IP addresses of the device, which allows for fast access via webbrowser. Warnings that eventually must be indicated are
displayed as well.
To achieve maximum reliability, the management as well
as the data ports on the back of the device are implemented redundant.
The power supply of the IP gateways is implemented redundant as well. Optionally the devices are equipped with
two 230 V power supplies or two -48 V power supplies.
38
Frontside:
Display
Info button Navigation buttons
Power LED
Warning LED
Escape button
Testpoint
Serial port
Error LED
Backside:
Management ports A, B
Data ports A, B
BNC ASI In-, resp. Outputs
Grounding terminal
Mains connection, Power swicth
39
Gateways
IP  ASI AND ASI  IP
U 261
IP into ASI
zz
U 261: processing of up to 16 multicast groups
of one Gigabit-Ethernet-Stream into up to
16 DVB ASI outputs (one reception & broadcast
license included)
zz
U 262: processing of up to 16 DVB ASI inputs
into up to 16 multicast-groups of one GigabitEthernet-Stream (one broadcast & reception
license included)
zz RTP & FEC implemented
zz TS analyzer optionally available
zz for installation of master and regional head-ends
zz
230 V, redundant power supply integrated
zz 19 inch, 1 RU
U 262
ASI into IP
BLOCK DIAGRAM
U 261:
40
Data A
1000 BaseT
Data B
1000 BaseT
Receiving
Management
Mgmt A
100 BaseT
Mgmt B
100 BaseT
Transportstream
Decapsulation
IEEE 802.3
IP / UDP / RTP
FEC
Decapsulation
TS Processor
TS Processing
16 x ASI
HD
TV
Type
Order number
EAN-Code
U 261
U 261 i
U 262
U 262 i
380 261
380 262
380 263
380 264
4026187680213
4026187002701
4026187680282
4026187002725
Transportstream interfaces
DVB ASI
16 outputs, 1 input
16 inputs, 1 output
Connectors
Bitrate
BNC-jack
[Mbit/s]
netto 210 max.
Network interfaces
Type of interface
1000 Base-T Ethernet
Protocol
RTP, ARP, IPv4, UDP, IGMP, ICMP
Connection
2 x RJ 45
Absolute Bitrate
[Mbit/s]
950, max.
Ethernet MTU-Length
[bytes]
1500, max.
Transportstream editing
TS capsulation
UDP, UDP+RTP, 1-7 packets, FEC
Transportstream editing
transparent (188 oder 204 packets)
Control and management
Type
100 Base-T Ethernet
Features
Element control via HTTP/WEB,
Protocol
ARP, IPv4, TCP, HTTP, SNMP (error messages),
UDP, ICMP, FTP, TFTP,DNS, SNTP
Connectors
2 x RJ 45
Common data
Input voltage
Power consumption
[VDC]
100 - 240 V
- 48 V
100 - 240 V
- 48 V
[W]
22
17
22
17
Dimensions
Ambient temperature
1 HE / 19"
[°C]
0…+50
LICENSES FOR UPDATING THE U 261 / U 262 FUNCTIONALITY
Type
Order number
EAN-Code
Feature
U 261 TSL
U 262 TSL
380 266
380 265
TS-Analyzer
380 267
4026187002718
4026187002732
4026187000097
additional reception license for
U 261 & U 261 i
additional reception license for
U 262 & U 262 i
License for clearing of the
transport stream anaylzer for checking of MPEGTS
on PID-level
41
Active Combining
ACTIVE COMBINING NETWORK
19 inch version
U 901
zz for extremely low-noise and low-distortion com
bining of up to 8 base units
zz gain matching can be effected individually either
for each input or all inputs by means of
zz fixed attenuation pads
zz preemphase adjustable
zz testpoint (-20 dB, directional coupler) for
measuring purposes
zz U 901 and VZN 8 can receive the operating
voltage either directly via the RF inputs (remote
feeding via V 16) or via an external power
supply
VZN 8
Trims-installation version
Type
Order number
EAN-Code
Impedance
VZN 8
380 190
380 191
4026187651244
4026187651381
[Ω]
75
[MHz]
47 - 862
[dB]
≥ 1, full range
≥ 0,2, in 8 MHz channel
Gain
[dB]
0 - 7 pluggable in 1 dB steps by attenuation pads (short)
Preemphase
[dB]
0 - 15
Intermodulation distance
EN 50083-3
@ 81 dBµW (100 dBµV)
[dB]
[dB]
3.0. ≥ 92
2.0. ≥ 79
Return loss
Inputs-Outputs
[dB]
≥ 16
Isolation inputs
[dB]
typ. ≥ 20, minimum 18
Testpoint
[dB]
- 20 ± 1 directional coupler
Remote powering
[V~]
12 - 19 via output 1 and 8 or external connector
Power consumption
[W]
12
Frequency range
Attenuation distortion
Housing
Ambient temperature
42
U 901
19'', 1 HE
[°C]
0…+50
Passive Combining
PASSIVE COMBINING NETWORK
U 960
zz for distribution of input signals in the frequency
range 5 - 1000 MHz
zz individual mounting subject to customer request
Type
U 960
Order number
380 195
EAN-Code
Impedance
4026187680152
[Ω]
75
[MHz]
5 - 1000
Screening
[dB]
> 100
Connectors
[dB]
F-Buchsen
Through loss
[dB]
3,8 ± 0,5
Isolation
[dB]
> 24
Return loss
[dB]
> 21
Through loss
[dB]
6,5 ± 0,5
Isolation
[dB]
> 24
Return loss
[dB]
> 22
Through loss
[dB]
7,5 ± 0,5
Isolation
[dB]
> 23
Return loss
[dB]
> 23
Through loss
[dB]
11,2 ± 0,5
Isolation
[dB]
> 29
Return loss
[dB]
> 21
Frequency range
can be assembled with:
2-way splitter
3-way splitter
4-way splitterr
8-way splitter
Common data
Housing
Ambient temperature
19'', 1 HE
[°C]
0…+50
43
Active SAT splitters
FOR DISTRIBUTION OF SAT POLARISATIONS
U 911 - U 946
zz 19-inch rack-version
attenuation and slope adjustable via HE
programming software, completely remote
maintenance, transmission of system-error
indication
Type
U 911
U 912
U 914
U 915
Order number
380 192
380 212
380 214
380 215
EAN-Code 4026187…
...651435
...002749
...651909
002763
Connectors
[Ω]
Type
Order number
EAN-Code 4026187…
Connectors
U 921
U 922
U 924
U 925
380 221
380 222
380 224
380 225
...735180
...002787
...735173
002800
[Ω]
Type
Order number
EAN-Code 4026187…
Connectors
In- and outputs: F-jacks, 75
In- and outputs: SMA-connectors, 50
U 931
U 932
U 934
U 935
380 231
380 232
380 234
380 235
...002831
...002855
...002862
...002824
[Ω]
Type
Inputs: SMA-connectors, 50 & Outputs: F-jacks, 75
U 941
U 942
U 944
U 945
Order number
380 241
380 242
380 244
380 245
EAN- Code 4026187…
...002886
...002893
...002916
...002923
Connectors
[Ω]
Inputs: F-jacks, 75 & Outputs: SMA-connectors, 50
Common data
Inputs / Outputs
2 x 1 in 8
Num. of power suppl. 230 V / 28VA
2
1
2
1
Remote current
[ma]
350
350
350
350
LNB voltage
[V]
16
16
16
16
Input frequency range
[MHz]
Input level value
950 - 2150
[dBµV]
85
Through loss
[dB]
0±2
Isolation
[dB]
> 40
Level control (0,5 dB steps)
[dB]
0…-15
Equalizer
[dB]
0/7±1
[dBss]
[dBss]
<1
<2
Return loss
Inputs / Outputs
[dB]
≥ 12 / ≥ 14
Output isolation
[dB]
> 20
Testpoints (1 per polarization)
Value output isolation
Return loss
[dB]
[dB]
10
12
Frequency range insertion loss
in 36 MHz bandwidth
in nominal frequency range
* maximum 1,5 A, depending on power supply and internal securing
44
1 x 1 in 16
Accessories
CHANNEL SELECTIVE FILTERS, MOUNTING CABINETS
U-KF
zz channel selective pluggable output filter module for
maintaining the outstanding output parameters
even after combining
zz for U 1xx signal converters
Order number: 380 ...
(Please order with specified output channel.)
Channel range: 47 - 862 MHz
LGH 2000
zz protective housing made of 1,2 mm sheet steel
with PURAL-coating 7032
zz eight pre-punches that can be tweaked out if
required for cable feed
zz ventilation grills for good ventilation
zz uniform locking safety lock
zz delivered with particle board for mounting
zz 19“ rack, 600 x 2000 x 600 mm, 42 RU
zz including power distribution
Order number: 189 931
EAN-Code: 4026187591731
45
Application solutions
Streaming of DVB-S2 input signals to IP with Descrambling
SAT position 1
SAT position 2
4
4
4
SAT position 3
SAT position 4
4
4
DATA A
DATA B
IP Backbone Data A & B
MGMT A
IP Backbone Mgmt A & B
MGMT B
zz 12 x DVB-S2 to IP with multichannel decryption zz high signal density with 12 streams per RU
zz support of UDP/RTP and FEC
zz up to 4 satellite positions with 16 input multiswitch thanks to DiSEqC 2.0 support
zz fully integrated to the ASTRO U 100-C management system
46
IP head-end: 32 x IP / QAM, 48 x IP / PAL, 40 x IP / FM with fully redundant
network structure for management and data connections
DVB-S2 / IP
DVB-S2 / IP
IP backbone
Mgmt A & B
IP backbone
Data A & B
4
8
1
4
6
1
x
x
x
x
x
x
U 100-230 base unit
U 100-SNT power supply
U 100-C management system
U 158, 8 channel IP / QAM
U 118, 8 channel IP / PAL (NTSC)
U 125, 40 channel IP / FM
4
6
6
6
Combining: U 960
zz conversion of 32 QAM channels, 48 PAL, SECAM or NTSC channels and 40 FM stations out of
IP multicast groups zz only 4 19 inch rack units required
zz compatible to any other Video-over-IP equipment encapsulating MPEG-TS to IP, according
applicable standards
47
Application solutions
Demonstration of Link and Source redundancy
Primary Source
Secondary Source
Data A
Data B
Switch Data B
Switch Data A
U 116 No.1
U 116 No.2
Regular Operation:
●
●
Primary and Secondary Source are working
IP Receiver “Data A” and “Primary Source” are working according the configured priorities
Operation with two failure events:
●
●
48
Primary Source failure and Switch Data A failure
IP Receiver “Data B” and “Secondary Source is working
IP head-end: 20 x IP/COFDM, 12 x IP in / IP out Descrambling
IP backbone Data A & B
1 x U 100-230 base unit
3 x U 194 IP / IP descrambler
2 x U 100-SNT power supply
2 x U 100-230 base unit
5 x U 174, 4 channel IP/COFDM
1 x U 100-C, management system
4 x U 100-SNT power supply
zz descrambling of 12 streams per rack unit zz multiservice decrambling
zz cascadable CI slots
49
Technical appendix
Abbreviations in digital technology
Abbr.
50
Term
Meaning
CA
Conditional Access
conditional access to a encrypted program programme offering (access only for authorized users)
CAM
Conditional Access Module
decoder module for decryption of programme content
CAS
Conditional Access System
access system for pay TV
CI
Common Interface
common interface of DVB receivers for a CA module
COFM
Coded Orthogonal Frequency Multiplex
frequenzy multiplexing procedure; special implementation of multicarrier modulation
DiSEqC
Digital Satellite Equipment Control
digital control signal technology in satellite reception devices
DVB
Digital Video Broadcasting
standardised procedure for transmission of digital content (e. g. TV, radio, multi channel sound)
DVB-C
Digital Video Broadcasting - Cable
digital cable TV
DVB-S
Digital Video Broadcasting - Satellite
digital satellite TV
DVB-T
Digital Video Broadcasting - Terrestrial
digital terrestrial TV
EPG
Electronic Program Guide
elektronic program guide in set top boxes and TVs
FEC
Forward Error Correction
detection and correction of transmission errors by use of a redundancy info, attached to the signal
FTA
Free To Air
unencrypted transmitted TV offering
HDTV
High Definition Television
5 x higher resolution than conventional TV signal (SDTV) with aspect ratio 16:9
LNB
Low Noise Block Converter
reception head placed in the focus of a parabolic dish
MCPC
Multi Channel Per Carrier
merging of SCPC (see below) via multiplexing into a transponder
MPEG
Moving Pictures Expert Group
expert group engaging in standardisation of video and audio compression
NIT
Network Information Table
table including informationen on multiplexes and transport streams in a network (e. g. name and type of transmission system)
OSD
On-Screen-Display
additional informationen on the screen (e. g. programming data or adjustment menus)
PAT
Program Association Table
list of all available programmes in a transport stream (each program is assigned to a PID fin a program map table (PMT))
PCR
Program Clock Reference
enables the synchronisation of each deecoder to the received TV signal (at least once every 100 ms a PCR is transmitted)
PID
Packet Identifier
each table or each elementary stream in a transport stream is identified by a 13 bit PID
PMT
Program Map Table
table with informations on programmes
PPV
Pay-Per-View
billing method for pay TV
PSIP
Program and System Information Protocol
defines virtual channels and their content as well as the electronic programme guide
QAM
Quadrature Amplitude Modulation
a modulation procedure in communications engineering, combining amplitude modulation and phase modulation
QPSK
Quadrature Phase Shift Keying
digital modulation procedure in communications engineering; with QPSK two bits per symbol can be transmitted
SCPC
Single Channel Per Carrier
satellite transponder with only one service (TV, radio) per signal carrier
SCR
Satellite Channel Router
european unicable standard
SDTV
Standard Definition Television
conventional TV signal with low picutre resolution in PAL or NTSC
STB
Set Top Box
device for extending the usability of TVs
TDT
Time and Date Table
incorporates the universal time specification (UTC - universal time) coded as MJD (modified julian date)
TS
Transport Stream
standard format for zur transmission and storage of video, audio and SIPS data (see above)
USB
Universal Serial Bus
standard for connecting auxiliary devices (e. g. mouse, keyboard) to a PC
Made
Germa
Quality „Made in Germany“
ASTRO - System provider for head-end components
As a system provider ASTRO produces and sells a complete range of reception and distribution installations for satellite, cable and IPTV. We are the perfect partner for handling
the versatile challenges, multimedia communication involves. We offer individual solutions on highest technological level for the complex requirements in this future market.
With more than 65 years of experience in reception technology ASTRO is your competent partner
for head-end HFC network layout.
ASTRO supports integrators with its own planning department that delivers software aided network designs. Installers can be sure to be provided with an optimized head-end system, suitable
for the required application.
Quality „Made in Germany“
Made in ASTRO head-end components are „Made in Germany“. Each device of the
Germany U series is developed and produced in Bensberg close to Cologne.
51
IP
World-wide partners
Austria
Normann Engineering
4600 Wels
Tel: +43 7242 70 921-0
Fax: +43 7242 70 921-17
E-mail: office@normann.at
www.normann.at
Australia
Hills Antenna & TV Systems
2210 Riverwood (Sydney)
Tel: +61 2 9717 5210
Fax: +61 2 9717 5209
E-mail:info@hillsantenna.com.au
www.hillsantenna.com.au
Belarus
BELVIASAT Engineering
Minsk
+375-29-6831620
Tel: Fax: +375-17-269-93-42
E-mail: engineering@belviasat.tv
www.engineering.belviasat.tv
Bosnia and Herzegovina
VERSO d.o.o.
71000 Sarajevo
+387 33 264 810
Tel: Fax: +387 33 264 811
E-mail: aisa.zembo@verso.ba
Czech Republic
Katro Servis spol. s.r.o.
51301 Semily
+42 481 621 255
Tel: Fax: +42 481 625 453
E-mail: katroservis@katroservis.cz
www.katroservis.cz
Denmark
TELEDAN-WITRONIC A/S
2610 Radovre
7563 1199
Tel: Fax: 7563 1188
E-mail:info@teledan.dk
Egypt
Cablenet Egypt
Cairo
+(202) 240 23 451
Tel:
Fax:
+(202) 24011399
E-mail:Tvnetcable1@tedata.net.eg
Netherlands
Hemmink B.V.
8013 PV Zwolle
Tel: +31 38 - 4698200
Fax: +31 38 - 4698210
E-mail: info@hemmink.nl
www.hemmink.nl
Sweden
Antennlaget AB
350 03 Växjö
Tel: +46 470-70 91 90
Fax: +46 470-70 91 91
E-mail: info@antennlaget.se
www.antennlaget.se
Norway
CableCom a.s
3202 Sandefjord
+47 33 48 33 48
Tel: Fax: +47 33 44 60 44/451
E-mail: cablecom@cablecom.no
www.cablecom.no
Thailand
LEO Technology and Marketing
Nonthaburi 11000
+66 2926 1870-3
Tel: Fax:
+66 2924 6644
E-mail: info@leotech.co.th
www.leotech.co.th
Indonesia
ASTRO representation Indonesia
Tangerang 15321
Roland Würth
Tel: +62 21 537 6179
Fax:
+62 21 537 6179
E-mail: r.wuerth@astro-kom.de
Republic of Moldova
DIGIMAX
Kishinev
+373 22 536553
Tel: Fax: +373 22 522599
E-mail: info@digimax.md
www.digimax.md
Turkey
PROAKTIF A.S.
34386 Okmeydani Istanbul
Tel: +90 212 320 09 80
Fax: +90 212 320 09 81
www.proaktif.com.tr
Kazahstan
ATTA GROUP
050012 Astana
Tel: +7 7172 345587
+7 7172 345587
Fax:
a.klec@catv.kz
www.catv.kz
Russia
Kontur M
Moscow 129344
Tel: +7 495 2218188
Fax: +7 495 2218188
E-mail: barg@konturm.ru
www.konturm.ru
Latvia
Vectrum
1021 Riga
Tel: 00371 66117690
Fax: 00371 66117691
E-mail: info@vectrum.eu
www.vectrum.eu
Serbia
SAT-TRAKT
24300 Backa Topola
+381 (0)24 712452
Tel: Fax: +381 (0)24 715761
E-mail: b.topola@sattrakt.com
Hungary
HFC Technics
Industrial Commercial & Service Ltd.
H-1044 Budapest
+36 1 273 1991
Tel: Fax: +36 1 273 1992
E-mail: info@hfctechnics.hu
www.hfctechnics.hu
India
/PWBDPN%JHJUSPOJDT175-5%
)ZEFSBCBE
Tel: +91 Fax:
+91 E-mail: @OPWBDPNJO
www.OPWBDPNJO
Lituania
ELPA IR PARTNERIAI UAB
Klaipeda LT-91203
+370 46 380 178
Tel: Fax:
+370 46 380 179
Email: mindaugas@elpa.lt
www.elpa.lt
Ukraine
Mortelecom
65029 Odessa
+38 048 777-444-7
Tel:
Fax:
+38 (048) 7164022
E-mail: mtk@mtk.com.ua
www.mtk.com.ua
Southern Europe / Middle East / Africa
ASTRO Repres. Southern Europe /
Middle East / Africa
Motty Vigdor
+49 (0) 2204967129
Tel:
E-mail: v.motty@astro-kom.de
GUS / Baltikum
ASTRO Representation GUS / Baltic
States
Germann Geer
04105 Leipzig
Tel:
+49 341 / 9276491
Fax:
+49 341 / 9276492
E-mail:g.geer@astro-kom.de
Hong Kong
True Cosmos Development Ltd
Hong Kong
+852 28543377
Tel: Fax: +852 28543344
E-mail: trosmos@netvigator.com
Version 05-2016
Estonia
MRF Baltic OÜ
Tallinn 13515
+372 59115560
Tel:
E-mail:info@vectrum.eu
www.vectrum.eu
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising