Gaming Parts - Leisure Herrero

Gaming Parts - Leisure Herrero
Gaming Parts
Atronic Parts
SEGA gam ing
Microswitch
Replacement
Pushbutton
Gas Spring
Part no.
22-0719-2
• Used in Atronic slantop machines
Part no.
H70-1131-00
Description
Gas spring
Atronic Ref.
65007212
Momentary
Switch Lock
Replacement Pushbutton for Sega, Royal Ascot,
Derby etc.
Pushbutton is supplied without legend and
lens cap. LED included.
Part no.
125-0010
125-0011
125-0012
Description
Pushbutton only (no lens legend plate)
Legend plate (no text)
Lens cap
Keyed alike #2341
Spade terminal with 2 keys
Part no.
H30-1086-00
Description
Switch lock
Atronic Ref.
65008259
Description
Armrest set Sega Royal Ascot
Only brand names like Osram, Sylvania or Philips
Atronic Ref.
65002265
65002190
Miniature Lamps
Part no.
-73
-161
Description
14V 0.08A
14V 0.19A
Description
Gas strut for Williams slant top slots
Holds much longer as traditional armrests.
Made of extremely durable polyurethane material.
Sold as set with 1 centre piece and 2 corners.
W MS Gam ing Parts
Fluorescent Tubes
Description
Fluoresc. tube 8W
Fluoresc. tube 15W
Allows door to be held open without assistance
Williams old ref no. 20-003068
Williams new ref. no. 20-004294
Replacement Arm Rest Set for
Sega Ascot Special
Part no.
119-1005-2
Part no.
F8T5CW
F15T8CW
W M S Ref.
20-001066 -16
Atronic Ref.
65008714
Keyed alike #2341
Spade terminal with 2 keys
Description
Switch lock
Description
Microswitch
Gas Strut for WMS Slant Top Slots
Part no.
H70-0315-00
On-Off Switch Lock
Part no.
H30-1086-01
Used on WS M handle mechanism
Used on WS M Bluebird
Atronic Ref.
65003139
65002426
17” Ceronix VGA Monitor for
Williams Upright Games
Direct replacement for Wells Gardner and
Kristel monitors
Best picture in the industry!
Complete with touch screen and controller
Dual focus high resolution
.27mm dot trio
Full active auto colour bias
Auto bright
Rated operating temperature 70•
Part no.
150M G4090
Ballast
Description
17” Ceronix VGA M onitor
Ballast for 15W fluorescent lamps
Used on WS M Bluebird
Part no.
H20-10481.1
17” Replacement Monitor for
Atronic Cashline Machines
Direct replacement for original monitor
Best picture in the industry!
Complete with touch screen and controller
Dual focus high resolution
Competitive alternative
Full active auto colour bias
Auto bright
Rated operating temperature 70•
Part no.
150M G4095
Description
17” Atronic cashline m onitor
Description
Ballast
6-Digit
Meter
for WMS
Gaming
6-digit non-reset meter counts up to 600 coins
per minute
Back of panel mounting style
Ultrasonically welded tamper-proof end cap
Pulse length: 50 ms min
Dimensions: .75 W x .125 H
Power consumption: 5 watts
Voltage: 6VDC
Ref. no. 20-9951
Part no.
H42-7427-00
Description
6-Digit m eter for WMS gaming
Fluorescent Tubes
Only brand names like Osram, Sylvania or Philips
Part no.
F8T5CW
F14T8CW
F15T8CW
F18T8K24CW
FC6T9CW
Description
Fluoresc. tube
Fluoresc. tube
Fluoresc. tube
Fluoresc. tube
Circline lam p
8W
14W
15W
18W 24” 61cm
W M S Ref.
24-8833
24-8836
24-8809
24-8147
24-11504
Miniature Lamps
Part no.
-73
-159
Description
14V 0.08A
T-3-1/4 6.3V 0.15Am p
W M S Ref.
24-8880
24-8768
Replacement Parts for Bally Gaming
Coin Deflector
Hopper Knife
Part no.
14-0095
Description
Coin deflector
Bally Ref.
P839
Used in all hoppers
Plastic model with stainless steel insert
Part no.
14-0281
Description
Hopper knife
Bally Ref.
P846-1 / M03068-001A
LED Board
For validator bezel
Can be used in Bally 6000 series
Part no.
119-0033
Description
LED Board
Bally Ref.
Chrome Hub
Metal Hopper Knife
Can be used in all hoppers after model 2000
Steel hopper knife
Part no.
14-0295
Description
M etal Hopper knife
Bally Ref.
Standard plastic hub
Gold or chrome plated
Part no.
12-1200-4
12-1200-8
Description
Gold plated hub
Chrome plated hub
Bally Ref.
C641
14” Monitor
Ceronix monitor for use in Bally uprights V5500
and Bally game maker
Including Touchscreen
Microswitch
Handle and Ball Assembly
Used for rock and roller assembly
Part no.
22-0715
Description
Microswitch
Bally Ref.
E108-200
Part no.
150M G4055
Standard handle assembly
Includes black ball
Part no.
12-1318
Description
Chrome handle assem bly
Description
14” m onitor with touch
Bally Ref.
83779
Bally Ref.
AS2303
Microswitch
Rock and Roller Assembly
Part no.
14-0455-1
Description
Rock and roller assem bly
Ball for
Handle Assembly
Bally Ref.
A2893-6
Used in many applications, hoppers,
pushbuttons
Part no.
22-0731-2
Description
Microswitch
Bally Ref.
E108-223
Black ball for handle assembly
Part no.
12-1100
Description
Ball
Bally Ref.
C642
Wiper
Part no.
14-0070
Description
Wiper
Bally Ref.
P845
Fluorescent Tubes
Handle Mechanism Bolt
Part no.
678-101-700
Description
Bolt
Only brand names like Osram, Sylvania or Philips
Bally Ref.
M1372
Agitator
Including bushings
Part no.
14-0571
Description
Agitator
Bally Ref.
R526
PSU Board
Hopper Motor
24V 31rpm
Part no.
14-0654-1310
Description
Hopper m otor
Bally Ref.
E119-520
Replacement power supply board for Bally slots
Used in Bally pro series and Bally 5000, V7000
and V7200 series
63.5 Watts
Part no.
H80-1178-00
Description
PSU Board
Bally Ref.
Part no.
F4T5CW
F6T5CW
F8T5CW
F14T8CW
F15T8CW
F18T8K24CW
Description
Fluorescent tube
Fluorescent tube
Fluorescent tube
Fluorescent tube
Fluorescent tube
Fluorescent tube
4W
6W
8W
14W
15W
18W
Bally Ref.
E412-25
E412-6
E412-5
E412-14
E412-14
E412-19
White LED
Used for replacement of incandescent lamps
in buttons
5m m (T1-3/4)
Part no.
161-312059
Description
12V LED
Bally Ref.
83779
Replacement Parts for IGT
Coin Wiper
Part no.
119-0004
Description
Coin wiper
Metal Coin Knife
Part no.
14-0295
Description
M etal coin knife
Hopper Motor
Used on game King and others
30RPM 24V
Coin Deflector
Part no.
119-0005
Part no.
H70-0495-00
Description
Coin deflector
Description
Hopper m otor
IGT Ref.
35003290 / 35003590
Hopper Knife Plastic
Used in certain models IGT hoppers.
Part no.
119-0040
Description
Hopper knife plastic
Wiper Assembly
Shelf W heel
Part no.
119-0010
119-0020
119-0013
119-0014
Size in m m
For
€ 0.10
€ 0.50 and for USD 0.25
€ 1.00
€ 2.00
For IGT small coin escalators
Ref.no. 681 042 00
Coin-out
Optic
Part no.
H70-0593-00
Description
Replacem ent wiper assem bly
For IGT hoppers
Ref.no. 379 063 00
Part no.
H70-0601-00
Description
Replacem ent coin-out optic
Wiper
For escalator hopper
Part no.
H70-1216-00
Description
Wiper
IGT Ref.
68102400
3-Star Agitator
With metal inserts.
Part no.
119-0003
Description
3-Star agitator
Replacement Hopper Sensor
IGT Ref.
57200800
For IGT games
Ref.no. 379 037 90
Part no.
H70-0483-00
Description
Replacem ent hopper sensor
Hopper Wiper Rubber
For IGT machines
Replacement rubber track for hopper wiper
Held in place with 2 rivets
Sold per 30cm
370cm per box
Brake Assembly
Part no.
H70-0826-00
Description
Brake assem bly
IGT Ref.
Part no.
H70-0900-00
Hopper Optic Cover
For IGT machines
For high security optic
Ref.no. 688 528 00
Part no.
H70-0589-00
Description
Replacem ent hopper optic cover
Description
Hopper wiper rubber
Replacement Parts for IGT
Replacement
Button Set for
IGT PE Plus
Slant Top Slot Machines
Replacement
Button Set for
IGT PE Plus
Upright Slot Machines
All buttons have clear caps, white legends and black print, except the
“Change” button, which has a red legend and white print
Fitted with #86 6.3 volt lamp
Set includes: 5 Rectangular “Hold/Cancel” buttons
1 Rectangular “Cash Out” button
1 Rectangular “Bet One Credit” button
1 Rectangular “Play 5 Credits” button
1 Rectangular “Deal/Draw” button
1 Small Square “Change” button
Complete individual replacement buttons:
Small square buttons with clear caps
All buttons have white legends and black print, except the
“Change” button, which has a red legend and white print
Fitted with #86 6.3 volt lamp
Set includes: 5 “Hold/Cancel” buttons
1 “Cash Out” button
1 “Change” button
1 “Max Bet” button
1 “Deal/Draw” button
1 “Bet One” button
Complete individual replacement buttons:
Part no.
H57-2000-51800006
H57-2000-518605
H57-2000-518HP610
H57-2000-518220
H57-2000-518B56
H57-2SP2-408333
Description
“Hold / Cancel”
“Cash Out”
“Bet One Credit”
“Play 5 Credits”
“Deal / Draw”
“Change”
Part no.
H57-KIT-100
Description
Complete button set for IGT PE plus slant top slot machine
Part no.
H57-2SP0-418311
H57-2SP2-418332
H57-2SP2-408333
H57-2SP0-418330
H57-2SP0-418248
H57-2SP0-418331
Description
“Hold / Cancel”
“Cash Out”
“Change”
“Max Bet”
“Deal / Draw”
“Bet One”
Part no.
H57-KIT-200
Description
Complete button set for IGT PE plus upright slot m achine
Replacement Button Set for IGT S Plus Upright Slot
Machines
Large and small square buttons with clear caps, white legends and black
print
Fitted with #555 6.3 volt lamp
Fits IGT S Plus Machines 1995 to present
Set includes: 1 Large Square “Spin reels” button
1 Large Square “Play Max Credits” button
1 Small Square “Bet One Credit” button
1 Small Square “Change” button
1 Small Square “Cash/Credit” button
Complete individual replacement buttons:
Part no.
H54-0006-318HP73
H54-0006-318HP82
H54-0006-418HP593
H54-0006-418HP609
H54-0006-4181667
Description
“Spin Reels”
“Play Max Credits”
“Bet One Credit”
“Change”
“Cash/Credit”
Part no.
H57-KIT-300
Description
Complete button set for IGT S plus upright slot machine
High Quality Replacement
Monitors for IGT
The Standard of the Gaming Industry
Built with Automatic Color Adjustment so every monitor displays the same
Includes a high efficiency switching mode power supply for lower power
requirements
Engineered to run cool - without a fan
Designed for easy maintenance
Service manuals are clear and helpful
Part no.
150M G4000
150M G4022
150M G4013
150M G4051
150M G4050
150M G4062
150M G4019
Description
14” CGA M onitor for IGT upright games
14” 1493 Flat top m onitor with touch screen & controller for IGT gam es
14” VGA M onitor with touch screen for IGT game King
17” M onitor with touch screen & controller for IGT slant top gam es
17” VGA M onitor with touch screen & controller for IGT I-series games
19’ VGA M onitor for IGT upright game King with touch screen & controller
20” VGA M onitor for IGT game King
Replacement Parts for IGT
Denomination Arrow LED Board
For IGT Game King Upright
10 Yellow, 5mm LED’s w/inverted cone
Part no.
119-0032
Description
Denomination Arrow LED Board
Lampholder
Lamps Cross Reference List
IGT Ref.
19301390
19301590
19302390
19303090
Description
Ba9S 6.3V 0.15 Amp
T-3-1/4 10mm 6.3V 0.25 Amp
T-1-3/4 6mm 6.3V 0.2 Amp
T-1-1/2 5mm 14V 0.08 Amp
Part no.
-47
-259
-86
-658
For 10mm (T1-3/4) wedge base lamps or LEDS
Part no.
H70-1467-00
Description
Lam pholder
IGT Ref.
12006690
Denomination Arrow LED Board
For IGT Game King Interactive Upright
8 Yellow/ 2 white, 5mm LED’s w/inverted cone
Part no.
119-0036
Description
Denomination Arrow LED Board
Mini-Lamp for IGT Jeopardy Game
Very bright 2.6 watts
Lamp No. 10969
Wedge Base (T3.25)
12 volts
Part no.
H91-0586-00
Electronic Ballast
For IGT machines
For F15T8 lamps
With polymer fuse
0.6A, 25VDC
Description
Mini-lamp for IGT Jeopardy game
Part no.
H70-0635-00
H70-0824-00
Ref. no.
195 076 90
195 069 90
Description
Electronic ballast, 15W
Electronic ballast, 8W
Fluorescent Lamps
IGT Ref.
19400490
19401390
Description
Fluoresc. lam p 15W CW 18”-46cm
Fluoresc. lam p 14W CW 15”-38cm
Part no.
F15T8CW
F14T8CW
LED Board for IGT Slanttop
Bill Validator
Part no.
119-0034
Description
LED Board for IGT Slanttop
Ballast
T2 Fluorescent Tube
Ballast 25VDC
For 22-40W Circline lamps
Used in certain models IGT machines.
Part no.
FM 6T2-830
Description
Fluorescent tube T2 6W
Part no.
H70-1151-00
Description
Ballast
IGT Ref.
19507800
Denomination LED Board
For 17” and 19” Slanttop
Part no.
119-0035
Description
Denomination LED Board
Replacement LEDS
Part no.
161-306059
161-312059
Description
LED 5mm 6V white
LED 5mm 12V white
Circline Lamp
IGT Ref.
19403590
19403390
Description
22W lam p
32W lam p
Part no.
FC22CW
FC32CW
Lampholder
For 5mm (T1-3/4) wedge base lamps or LEDS
Part no.
H70-1331-00
Description
Lam pholder
IGT Ref.
12004390
Panasonic Card Reader for
Player Tracking
Used in IGT Smart system player tracking units
Panasonic #Zu-M2121-S352 magnetic
card reader
Black bezel included
2 tracks, magnetic head, small size, light weight
Size: Outside dimensions 102mm
(W) x 100mm (D) x 26mm (H)
Part no.
H80-1208-00
Description
Panasonic card reader
Replacement Parts for IGT
Integrated Circuits for IGT Machines
Part no.
H60-0471-00
H60-0133-00
H60-0036-00
H60-0037-00
H60-0489-00
H60-0071-00
H60-0074-00
H60-0075-00
H60-0028-00
H60-0029-00
H60-0076-00
H60-0077-00
H60-0078-00
H60-0030-00
H60-0079-00
H60-0080-00
H60-0081-00
H60-0082-00
H60-0083-00
H60-0085-00
H60-0086-00
H60-0087-00
H60-0088-00
Ref. no.
24C04
27C64
4049UB
4094B
6264-10
6N137
6N139
74HC00
74HC02
74HC04
74HC08
74HC107
74HC126
74HC138
74HC14
74HC161
74HC166
74HC174
74HC20
74HC32
74HC573
74HC574
74HC74
Description
Eprom 4k M other board
Eprom, CMOS 64K 250 Ns
Hex inverting buffer
Shift register
8k x 8 static ram
High speed opto-coupler
Opto-coupler, Darlington
Quad 2-input nand gate
Quad 2-input nor gate
Hex inverter
Quad, and gate 2-input
Dual J-K Flip/ Flop
Buffer/Driver, quad
3 to 8 line, detector
Hex inverting Schmit Trigger
4 Bit binary sync. controller
8 Bit shift register
D Type hex F/F with clear
Dual 4- In nand gate
Quad 2-input or gate
Octal, Latch transistor P
Octal D type Flip/Flop
Dual- D Type F/F
Part no.
H60-0095-00
H60-0130-00
H60-0094-00
H60-0297-00
H60-0127-00
H60-0093-00
H60-0091-00
H60-0090-00
H60-0125-00
H60-0123-00
H60-0073-00
H60-0048-00
H60-0056-00
H60-0060-00
H60-0041-00
H60-0054-00
Ref. no.
74HCT93
80C32
CD4021
CD4027
CD4584
H11A1
HC-18/U
ICL8211
ILD-2
ILQ-1
LM 317T
LM 3302
MOC3010
MOC3031
QSD733
ULN2003
Description
Dual 4 bit controller
Microprocessor 40 pin dip
Shift register 8 stage
J-K Dual Flip/Flop
Inverter, Hexadecimal Schmit
Opto-coupler, transistor
Crystal
Prog voltage reference
Dual opto-coupler
Quad, opto-coupler
Regulator Pos adjust, 1.5a
Quad voltage com paritor
Triac, opto-coupler
Opto-coupler, triac
Photo transistor
Darlington driver 7 out
Self Test Switch
For IGT machines
Ref.no. 516 025 90
1 amp, 120 VAC
Part no.
H42-8092-01
Description
Self test switch
3” Fan
3.15” square x 1” deep
Sealed steel ball bearings for long life
Sturdy plastic construction
24V, .18 amp
Ref.no. 26002990
Part no.
H80-0273-00
Description
3” Fan for IGT slot m achines
Reel Master
For IGT machines
Ref.no. 351 001 90
Part no.
H70-0594-00
Description
Replacem ent reel m aster
3” Ball Bearing Fan
Used in most gaming machines including Poker
Packed 20 per flat
Part no.
H70-0225-00
Description
3” Ball bearing fan
Reel Harness
For IGT machines
Ref.no. 607 536 00
Part no.
H70-0641-00
Description
Reel harness
3-1/2” Ball Bearing Fan
3 1⁄2 ” Ball bearing fans
15
⁄16 ” x 3 1⁄2 ” x 3 1⁄2 ”
50/60 Hz
Ball and Socket Bracket
For spring lift Airshocks
Ref. No. SL70-BS
Part no.
H70-0703-00
H70-0712-00
Description
SL70-BS 1”
Ball stud
SL69-BS 1/2” Ball stud
Part no.
H70-0226-00
H70-0226-10
24V Transformer
For IGT 8032 Processor board
50/60 Hz
5 Leads
Part no.
H70-1330-00
Description
24V Transform er
2” Shielded Speaker
Rem ote Power Supply Harness
For IGT machines
Ref.no. 607 376 00
Part no.
H70-0636-00
Description
Remote power supply harness
Voltage
115
12
Used on IGT slot machines
IGT ref. no. 13001490
8 Ohm, .4 watt
4 mounting holes
Part no.
H70-0014-00
Description
2” Speaker
Finger Guards for Fans
Protects fingers from touching fan blades
Steel wire construction
Nickel chrome finish
Spot welded
Part no.
H70-0226-50
Description
Finger guards for 3-1/2” fan
Replacement Parts for IGT
Mount
Microswitch
6-Digit Meter for IGT Reel Machines
Part no.
H70-0814-00
Description
Microswitch
For door-open optics
IGT Ref.
51000190 / 51010890
Part no.
H70-0980-00
Description
Mount
IGT Ref.
65309900
6-digit non-resetable counter
Counting speed: 20 counts per seconds
13-”flying leads
24VAC; no diode
IGT Ref. no. 29203490
Part no.
H42-7430-00
Description
6-Digit m eter for IGT reel m achines
Microswitch
Complete with roller arm
Omron SS5GL2T
Part no.
H95-0015-00
Description
Microswitch
IGT Ref.
51015190
19 Pins AMP Connectors for IGT
Monitors
Part no.
0-208210 -2
0-208209 -2
Description
19 pins AMP con. plug
19 pins AMP con. receptacle
IGT Ref.
21706890
21006290
Meter for IGT Slot Reel Machines
6-digit non-resetable counter
Counting speed: 20 counts per seconds
PC board mounting, 24VDC
IGT Ref. no. 29209390
Part no.
H42-7431-00
Description
6-Digit m eter for IGT slot m achines
5 Payline Super Stepper
For IGT Vision machines
Ref.no. 196 376 00
Part no.
H70-0624-00
H30-1086-01
Description
Female 16-20 AWG tin plated
Male 16-20 AWG tin plated
Molex Extraction Tool
Key is removable in OFF position only
Momentary or ON/OFF available
Double bitted keys are keyed alike #2341 with
2 keys per lock
Spade terminals
Barrel length: 27mm
Overall length: 22mm
4 amps/125VAC, 2amps/250VAC
H30-1086-00
Part no.
0-163083 -8
0-163081 -8
Description
5 Payline super stepper
Switch Locks
Part no.
Contacts for AMP Metrimate
drawer Connector
Description
Momentary switch lock
Key is removable only in the OFF position
On/Off Switch lock
Key is removable only in the OFF position
For IGT Belly light
Ref.no. 11-03-0044
For .165” Pins
Part no.
H92-0039-00
Description
Molex Extraction tool
Replacement Solenoid Assembly
CNT, WIDVDT
24 VDC
Ref.no. 450 036 00
Part no.
H70-0576-00
Description
Replacem ent solenoid assembly
for IGT m achines
Retrofit Monitor Harness for
IGT Games
Bell
Battery
Lithium battery 3.6V
Used on S-Plus games processor board
Part no.
H27-1236-00
Description
Battery
IGT Ref.
40401190
For IGT machines
24VDC pulsed
Ref.no. 220 024 90
Part no.
H70-0592-00
Description
Replacem ent Bell
For IGT Players Edge Plus games
Due to a change in Molex plug sizes, new
monitors are incompatible with older games
Harness allows new monitors to be placed into
older games
Ref. No. 607 055 01
Part no.
H70-0579-00
Description
Retrofit m onitor harness for IGT gam es
Replacement Parts for Orion
LED
5m m Wedge base LED used in all buttons
Ballast
Ballast with lampholder used for 7-9 and 11W
compact fluorescent lamps
Part no.
22-0112
Description
Ballast
Part no.
161-312059
Description
LED
Orion Ref.
27000113
Hopper Knife
Used in all hoppers
Part no.
14-0281
Description
Hopper knife
Orion Ref.
15820003
Orion Ref.
27001220
Doorswitch
Double pole doorswitch
Part no.
22-0746
Description
Doorswitch
Hopper Sensor
Orion Ref.
26500201
Used in all hoppers
Part no.
14-1140
Description
Hopper sensor
Orion Ref.
81020451
Com pact Fluorescent Lamps
Part no.
-9901-7CW
-9901-9CW
-9901-11CW
Description
7W lam p
9W lam p
11W lam p
Orion Ref.
27001124
27001120
27001123
Rock and Roller Assembly
Used in all hoppers
Powersupply
Part no.
22-3902
Description
Powersupply 200W
Orion Ref.
22003020
Part no.
14-1145
Description
Rock and roller assy
Orion Ref.
81020450
Touchscreen
Ballast
Part no.
22-0105-1
22-0106
22-0109
Description
Ballast 8W
Ballast 15W
Ballast 32W
Orion Ref.
27001205
27001201
27001202
17” ELO Intellitouch Touchscreen
Used in all Orion games
Part no.
002801A -1700
Description
Touchscreen
Orion Ref.
27400002
Motor
Used in all hoppers
24VDC
Com pact Fluorescent Lamps
Part no.
F8T5CW
F15T8CW
FC32CW
Description
Fluorescent lam p 8W
Fluorescent lam p 15W
Circline lam p 32W
Orion Ref.
27001101
27001102
27001121
Cooling Fans and Accessories
Part no.
22-2204-2
22-2204-11-1
22-2204-4
22-2208-90
22-2208-50
22-2209-1
Description
Fan 92x92mm 220VAC
Fan 50x50mm 12VDC
Fan 92x92mm 12VDC
Finger guard 90mm
Finger guard 50mm
Harness for AC fan
Orion Ref.
26904977
26904940
26904950
13000029
12430185
18500511
Part no.
14-1115
14-1135
Description
Hopper m otor assy 31 RPM
Hopper m otor assy 21 RPM
Wiper
Used in all hoppers
Part no.
14-0070
Description
Wiper
Pushbuttons
Part no.
22-4100-9
22-4030-9
22-2010-9
22-4110-9
Description
Pushbutton 27x27mm
Pushbutton 51x33mm
Pushbutton 51x51mm
Pushbutton 48x48mm
Agitator
Orion Ref.
26500526
26500533
26500502
26500522
Used in all hoppers
Includes bushings
Part no.
14-0571
Description
Agitator
Replacement Gaming Monitors
Replacement CRT Monitors for WMS
Featuring:
Automatic colour adjustment.
Including high efficient switch mode psu for low power requirements.
Designed for easy maintenance.
Part no.
150M G4090
150M G4064
Replacement CRT Monitors for Aristocrat
Featuring:
Automatic colour adjustment.
Including high efficient switch mode power supply unit for low power
requirements.
Designed for easy maintenance and long lasted life time.
Part no.
150M G4027
150M G4083
150M G4084
Description
17” VGA Slanttop m onitor / Aristocrat ref: 566251
20” VGA MK5 Upright m onitor / Aristocrat ref: 566496-1
20” VGA MK6 Upright m onitor / Aristocrat ref: 568896-2
Replacement CRT Monitors for Atronic
Part no.
150M G4077
150M G4095
Description
17” VGA Cashline m onitor without touchscreen / Atronic ref: 65018825
17” VGA Cashline m onitor including touchscreen / Atronic ref: 65024300
Replacement LCD Monitors for Atronic
Featuring:
Made from high quality components.
Kits are drop in replacement for Emotion machines.
Supplied with or without touchscreen.
Part no.
150M G4029
150M G4042
Description
17” LCD m onitor without touchscreen for use in Emotion / Atronic ref: 65040184
17” LCD m onitor including touchscreen for use in Emotion / Atronic ref: 65040713
Replacement CRT Monitors for Bally Gaming
Featuring:
Automatic colour adjustment.
Including high efficient switch mode power supply unit for low power
requirements.
Designed for easy maintenance and long lasted life time.
Part no.
150M G4005
150M G4016
150M G4055
150M G4067
150M G4052
Description
14” CGA m onitor / Bally Gaming ref: E832-27A
14” CGA Upright m onitor / Bally Gaming ref: E832-69
14” VGA Upright m onitor incl. touchscreen / Bally Gaming ref: 83799
Used in Bally Game M aker and Bally Upright V5500
17” VGA Upright m onitor including touchscreen
20” VGA Upright m onitor including touchscreen / Bally Gamingref: E0032-0092
Please check your machine manual for correct manufacturers part numbers!
Replacement CRT Monitors for Novomatic
Featuring:
Automatic colour adjustment.
Including high efficient switch mode psu for low power requirements.
Designed for easy maintenance.
Part no.
150M G0004
Descriptio n
19” XGA (48Khz) FST m onitor without touchscreen for Novom atic
Replacement CRT Monitors for Unidesa
Featuring:
Automatic colour adjustment.
Including high efficient switch mode psu for low power requirements.
Designed for easy maintenance.
Part no.
150M G0001
Description
17” VGA (31-38Khz) including touchscreen m onitor
Description
17” VGA Upright m onitor including touchscreen
20” VGA Slanttop m onitor including touchscreen
Replacement CRT Monitors for IGT
Featuring:
Automatic colour adjustment.
Including high efficient switch mode power supply unit for low power
requirements.
Designed for easy maintenance and long lasted life time.
• A ll offere d IG T replacem en t m onitor s w ith touchscree n are based
upo n a professionall y refurbis he d co ntrolle r b oard.
Part no.
150M G4000
150M G4002
150M G4006
150M G4011
150M G4026
150M G4004
150M G4013
150M G4022
150M G4023
150M G4049
150M G4050
150M G4051
150M G4053
150M G4060
150M G4061
150M G4062
150M G4097
150M G4003
150M G4019
150M G4020
Description
14” CGA Upright m onitor / IGT ref: 69104190 rev. B and 69103690
Used in IGT players edge and IGT players edge plus
14” CGA Upright m onitor / IGT ref: 69918500
14” CGA Slanttop m onitor / IGT ref: 69918300
14” CGA Flattop m onitor / IGT ref: 69918400
14” CGA Upright m onitor / IGT ref: 69917300 Cover rev. C
14” VGA 120V Upright m onitor / IGT ref: 69915600
14” VGA Upright m onitor including touchscreen / IGT ref: 69922100
Used in IGT Game King
14” VGA Flattop m onitor including touchscreen / IGT ref: 69922700
and 69914100, Used in IGT Bartop m achines
14” VGA Slanttop m onitor including touchscreen/ IGT ref: 69922500
17” VGA AVP Upright m onitor including touchscreen/ IGT ref: 69926401
17” VGA Upright m onitor including touchscreen/ IGT ref: 69919201
Used in IGT I-series uprights and Game King
17” VGA Slanttop m onitor including touchscreen/ IGT ref: 69920401
17” VGA Slanttop m onitor including touchscreen/ IGT ref: 69922001
with gutter
17” VGA Upright m onitor including touchscreen/ IGT ref: 69919401
17” VGA Slanttop m onitor including touchscreen/ IGT ref: 69920000
19” VGA Upright m onitor including touchscreen/ IGT ref: 69924601
Used in newer Upright cabinets of Game King series
19” VGA Slanttop m onitor including touchscreen
Used in IGT Austin powers and IGT I dream of Jeanie
20” CGA Upright m onitor / IGT ref: 69916800
20” VGA Upright m onitor / IGT ref: 69915900. Used in Game king
20” VGA Upright m onitor including touchscreen / IGT ref: 69922300
LCD Upgrade Kits for IGT
Featuring:
Update your older machines with a modern look.
Made from quality components including A-Grade Samsung LCD panels,
that offer better picture quality, balanced picture image and a longer life
span with no burn-in (which is typically found with traditional CRT monitors)
Kits are drop in replacements for 17” and 19” games.
(Slanttop and upright cabinets)
Kits are optional available with 25-pin advanced video platform connector
(AVP).
Includes touchscreen and controller.
All kits include plastic bezel.
1-year guarantee.
Part no.
H49-2541-00
H49-2540-00
H49-2538-00
H49-2539-00
H49-2535-00
H49-2534-00
H49-2537-00
H49-2536-00
Description
17” LCD Upright kit non AVP*
17” LCD Upright kit AVP* connector
17” LCD Slanttop kit non AVP*
17” LCD Slanttop kit AVP* connector
19” LCD Upright kit non AVP*
19” LCD Upright kit AVP* connector
19” LCD Slanttop kit non AVP*
19” LCD Slanttop kit AVP* connector
AVP=25-pin advanced video platform connector
Please note that all above m entioned m onitors are not OEM ’s original products but high quality drop in replacem ents
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising