How to Setup a Static IP Address in Your PS4

How to Setup a Static IP Address in Your PS4
How to Setup a Static IP Address in Your PS4
•
In the PS4 main menu, select Settings
•
Select Network
•
select Set Up Internet Connection
•
Choose Wifi or LAN Cable depending on how your local network is set up.
•
On the screen titled "How do you want to set up the Internet connection?,"
choose Custom
•
On the IP Address Settings screen, choose Manual
•
Select IP Address
•
Enter the 192.168.1.150 for the IP address. Select Done
•
•
•
•
•
Select Subnet Mask. Enter 255.255.255.0 Select Done
Select Default Gateway, enter 192.168.1.1. Select Done
Select Primary DNS, enter 192.168.1.1. Select Done
Secondary DNS, Leave Blank
Select Next
•
On the MTU Settings screen, choose Automatic
•
On the Proxy Server screen, choose Do Not Use
•
Select Test Internet Connection. Wait while the connection is tested.
•
Your PS4 should now have a static IP address. If you are having problems,
make sure that you have entered in the correct information. To double check
your numbers, from the main menu of your PS4,
select Settings, Network, View Connection Status.
7. After you have assigned a permanent IP address to your PS4 console
and forwarded the correct ports in your router, you can test your network
connection. To test the connection from the PS4:
•
•
•
In the main menu of your PS4, select Settings
Select Network
Select Test Internet Connection
Your console should now have a NAT Type 2 connection. This a common
networking problem that can be quite difficult to solve.
If you are not able to get a connection with NAT Type 2, check to see that
you have entered in the correct information. Double check the data that
you entered for the IP address, subnet mask, gateway, and DNS
addresses.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising