Rittal – Small Enclosures
Rittal – Small Enclosures
Fast and perfect,
with an exceptionally diverse
range of system accessories
R
The original is still the
best!
Packaging technology for the future
Whether you require enclosures for tough industrial
environments or for telecommunications, Rittal has the right
solution to suit any application. With our extensive range of
accessories, even individual configuration requirements
can be met cost-effectively and to optimum effect.
2
Rittal Small Enclosures
Rittal small enclosures owe their phenomenal success to a host of decisive benefits:
Perfectly coordinated sizes, designs and materials, mass production quality, plus the diversity of matching
system accessories. At Rittal, reliable protection against corrosion, fast global availability and international
approvals come as standard.
Polycarbonate
enclosures PK
RiLAN Industrial
from page 4
With metric knockouts . . . . . . . . . . . . . . . . . . . . . . 6
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cast aluminium
enclosures GA
Bus enclosures BG
from page 9
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Terminal boxes KL
from page 13
Without gland plate, depth 80/120 . . . . . . . . . . . . 13
With gland plate, depth 120 . . . . . . . . . . . . . . . . . 14
Stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Premium Line KL
from page 16
from page 18
Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Junction boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
from page 22
Stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Compact enclosures AE
from page 27
Width: 200 – 600, height: 300 – 400 . . . . . . . . . .
Width: 380 – 800, height: 500 – 1000 . . . . . . . . .
Width: 600 – 1000, height: 760 – 1400 . . . . . . . .
Protection category IP 69K . . . . . . . . . . . . . . . . .
Stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
28
29
30
31
Protection category IP 69K, stainless steel . . . . . 16
Plastic
enclosures KS
E box EB
Width: 200 – 500, height: 300 – 600 . . . . . . . . . . 32
Width: 600 – 1000, height: 600 – 1000 . . . . . . . . 33
from page 17
from page 32
Compact system enclosures
Rittal CM
from page 34
Width: 600 – 1200, height: 800 – 1400 . . . . . . . . 34
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
CS Outdoor
from page 39
CS wall-mounted enclosures . . . . . . . . . . . . . . . . 39
System accessories
from page 40
Smart solutions to the last detail
The answer is in the detail, and this is where Rittal comes
into its own.
• Time-saving quick-release fasteners
• Multi-folded enclosure protection channel to guard
against dirt and water
• Twin seals on the doors of the KS range
• Sophisticated attachment and mounting options
All these solutions are designed to save our customers
time and money.
Rittal Small Enclosures
3
Polycarbonate enclosures PK
T1
H1
H1
T1
B1
B1
1
1
Material:
Grey enclosure and cover
(version .000) from
fibreglass-reinforced
polycarbonate, transparent
cover (version .100) from
polycarbonate, cover screws
from polyamide, insulating
bungs from polyethylene.
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. PK
1
with cable gland
Model No. PK
with grey cover
2
Model No. PK
with transparent cover
Packs of
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. PK
with grey cover
2
Model No. PK
with transparent cover
Packs of
2
2
Colour:
RAL 7035
Protection category:
IP 66 to EN 60 529/10.91
50
52
35
50
65
35
9530.000 9531.000
–
–
Supply includes:
Enclosure and cover,
cover screws,
insulating bung for wall
mounting screws (not with
9530.000 and 9531.000),
all-round foamed-in
PU seal.
Approvals:
● Bureau Veritas
65
65
57
65
65
81
94
65
57
94
65
81
94
94
57
94
94
81
–
–
–
–
–
–
9500.000 9501.000 9502.000 9503.000 9504.000 9505.000
–
–
–
–
–
–
9504.100
–
10
10
12
12
8
8
6
6
110
110
66
110
110
90
130
94
57
130
94
81
130
130
75
130
130
99
180
94
57
180
94
81
9506.000 9507.000 9508.000 9509.000 9510.000 9511.000 9512.000 9513.000
9506.100 9507.100 9508.100 9509.100 9510.100 9511.100 9512.100 9513.100
6
6
4
4
4
4
2
2
Polycarbonate enclosures – accessories from page 7 General accessories from page 40
4
Rittal Small Enclosures
Polycarbonate enclosures PK
H1
T1
B1
Material:
Grey enclosure and cover
(version .000) from
fibreglass-reinforced
polycarbonate, transparent
cover (version .100) from
polycarbonate, cover screws
from polyamide, insulating
bungs from polyethylene.
Colour:
RAL 7035
Protection category:
IP 66 to EN 60 529/10.91
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. PK with grey cover
Model No. PK with transparent cover
Packs of
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. PK with grey cover
Model No. PK with transparent cover
Packs of
180
110
90
9514.000
9514.100
2
254
180
90
9520.000
9520.100
1
Supply includes:
Enclosure and cover,
cover screws,
insulating bungs for wall
mounting screws,
all-round foamed-in
PU seal.
180
110
111
9515.000
9515.100
2
180
110
165
9516.000
9516.100
2
254
180
111
9521.000
9521.100
1
Approvals:
● Bureau Veritas
182
180
90
9517.000
9517.100
1
254
180
165
9522.000
9522.100
1
182
180
111
9518.000
9518.100
1
360
254
111
9523.000
9523.100
1
Turn-lock fastener
A quick, convenient screw fastening aid is
obtained by clipping into the head of the lid
screw.
Material:
Polyamide
182
180
165
9519.000
9519.100
1
360
254
165
9524.000
9524.100
1
Packs of Model No. PK
For all
enclosures
100
9582.000
Supply includes:
1 pack
Polycarbonate enclosures – accessories from page 7 General accessories from page 40
Rittal Small Enclosures
5
Polycarbonate enclosures PK
With metric knockouts
H1
T1
B1
Material:
Grey enclosure and lid of
fibreglass-reinforced
polycarbonate, lid screws of
polyamide, insulating bung
of polythene.
Colour:
RAL 7035
Protection category:
IP 66 to EN 60 529
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. PK
Packs of
PK 9500.050
PK 9508.050
65
65
57
9500.050
12
PK 9514.050
Approvals:
● Bureau Veritas
Supply includes:
Enclosure and lid,
cover screws,
insulating bungs for wall
mounting screws,
all-round foamed-in
PU seal.
130
94
57
9508.050
4
180
110
90
9514.050
2
254
180
111
9521.050
1
PK 9521.050
M16/20
M20
M20/25
M25/32
M32/40
Polycarbonate enclosures – accessories from page 7 General accessories from page 40
6
Rittal Small Enclosures
Polycarbonate enclosures PK
Accessories
Mounting plate
For individual configuration of the enclosure
interior, the mounting plate offers a stable,
secure and flexible design option.
To fit
PK 9500.000 / PK 9501.000
PK 9502.000 / PK 9503.000
PK 9504.000 / PK 9505.000
PK 9506.000 / PK 9507.000
PK 9508.000 / PK 9509.000
PK 9510.000 / PK 9511.000
PK 9512.000 / PK 9513.000
PK 9514.000 / PK 9515.000
PK 9516.000
PK 9517.000 / PK 9518.000
PK 9519.000
PK 9520.000 / PK 9521.000
PK 9522.000
PK 9523.000 / PK 9524.000
1) with spacers
Width
mm
45
74
74
90
110
110
160
Height
mm
45
45
74
90
74
110
74
150
Packs of
Model No. PK
12
12
12
12
12
10
10
9540.0001)
9541.0001)
9542.0001)
9543.0001)
9544.0001)
9545.000
9546.000
90
10
9547.000
150
150
10
9548.000
220
150
8
9549.000
331
220
4
9550.000
Mounting plate
for polycarbonate enclosures
● PK 9530.000
● PK 9531.000
Via a 3-way depth-adjustable assembly
component, the mounting plate may also be
used as an inner cover for installed
equipment.
Hinges
For hinged attachment of lids.
The supplied drilling template ensures
problem-free assembly.
For enclosure
PK 9500.000 – PK 9513.000
PK 9514.000 – PK 9524.000
Rittal Small Enclosures
For enclosure
9530.000
9531.000
Packs of Model No. PK
10
9551.000
10
9552.000
Material:
Polycarbonate
Supply includes:
Assembly parts.
Supply includes:
1 set =
2 hinges,
4 assembly screws,
3 polyethylene sealing bungs,
1 drilling template.
Material
Polycarbonate
Polystyrene
External mounting bracket
To fit enclosure
● PK 9530.000
● PK 9531.000
With moulded lug for cable tie.
Material:
Polyamide
Design:
Melamine phenol-coated laminated paper,
2.5 mm thick.
Colour:
RAL 7035
Supply includes:
Self-tapping assembly screws.
Packs of
10 sets
10 sets
Packs of
10
Model No. PK
9580.000
9581.000
Model No. PK
9553.000
Supply includes:
Assembly parts.
7
Polycarbonate enclosures PK
Accessories
Wall mounting brackets
Packs of Model No. PK
The enclosure can be screwed to the wall
using four wall mounting brackets. The
bracket is securely attached to the
enclosure by means of pins.
Material:
Polyamide, grey
For all
enclosures
40
9583.000
Supply includes:
1 pack
The assembly screw is located in
the wall mounting bracket,
making it accessible at all times.
˚
90
12.5
The wall mounting bracket may
be fitted to the side or top.
A
12.5
A
12.5
Wall attachment can also be made directly
without the bracket:
Variant 1
Wall attachment in the
cover screw channel is
a simple, secure means of
attachment.
M4
M5
Support rail
The two support rail sections provide good
flexibility for accommodating terminal blocks
and installed components.
Design:
The support rails are designed in
accordance with EN 50 045 (TS 15/5.5) or
EN 50 022 (TS 35/7.5); the surface finish is
zinc-plated.
Supply includes:
Two self-tapping assembly screws.
Maximum number of terminals
Bar length
with the following terminal sizes
Packs of Model No. PK
mm
4 mm2
10 mm2
2.5 mm2
5
5
4
49.5
12
9560.000
11
11
8
80
12
9561.000
TS 15/5.5
14
14
10
92
12
9562.000
18
18
13
111
12
9563.000
12
9
5
81
12
9564.000
17
13
8
106
12
9565.000
TS 35/7.5
24
20
11
144
12
9566.000
38
32
19
216
12
9567.000
61
50
30
336
12
9568.000
Calculation of the maximum number of terminals is based on two end holders and a cover.
Rittal Small Enclosures
Rail
8
Variant 2
By knocking out the hole in the
enclosure base, mounting in the
enclosure interior is also
possible.
The screws must be concealed
using the sealing bungs supplied
with the enclosure. The spacing
between the attachment holes is
marked on the rear panel of the
enclosure.
Cast aluminium enclosures GA
H1
T1
B1
Material:
Enclosure and lid made from
cast aluminium, lid with
neoprene cord seal.
Surface finish:
Smooth spray finish similar to
RAL 7001
Protection category:
IP 67 to EN 60,529 / 10.91,
complies with NEMA 4.
Supply includes:
2 or 4 cover screws, captive
mounted,
2 or 4 screws for the
attachment of support rails,
mounting plates etc.,
1 screw for connection of the
PE conductor.
Rittal service:
Individual standard solutions
for enclosures and covers
● Hole drilling
● Thread tapping
● Milling
● Screen printing
● Engraving
● Choice of RAL colours
and other surface finishes
available on request.
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. GA
Packs of
50
58
98
150
75
125
175
250
122
45
64
64
64
80
80
80
80
120
30
36
36
36
57
57
57
57
80
9100.210 9101.210 9102.210 9103.210 9104.210 9105.210 9106.210 9107.210 9108.210
6
5
3
2
1
1
1
1
1
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. GA
Packs of
220
360
160
260
360
200
280
330
330
120
122
160
160
160
230
230
230
230
90
80
90
90
90
110
110
110
180
9110.210 9111.210 9112.210 9113.210 9114.210 9116.210 9117.210 9118.210 9119.210
1
1
1
1
1
1
1
1
1
Cast aluminium enclosures – accessories from page 10 General accessories from page 40
Rittal Small Enclosures
9
Cast aluminium enclosures GA
Accessories
Mounting plate
for universal interior installation.
Material:
Sheet steel, zinc-plated, passivated, with
attachment holes.
Exterior dimensions (mm)
Width
Height
114
69
164
69
239
69
109
107
207
107
347
107
144
142
245
142
346
142
183
214
264
214
314
214
For enclosure
Packs of
Model No. GA
GA 9105.210
GA 9106.210
GA 9107.210
GA 9108.210
GA 9110.210
GA 9111.210
GA 9112.210
GA 9113.210
GA 9114.210
GA 9116.210
GA 9117.210
GA 9118.210
GA 9119.210
10
10
5
2
2
2
2
2
1
1
1
9105.700
9106.700
9107.700
9108.700
9110.700
9111.700
9112.700
9113.700
9114.700
9116.700
9117.700
1
9118.700
Support rail
To accommodate terminal blocks or other
installed equipment.
Material:
Sheet steel, zinc-plated, passivated, with
attachment holes.
Maximum number of terminals
Rail length
with the following terminal sizes available for
population
4 mm2
10 mm2
2.5 mm2
mm
15
15
12
95
TS 15/5.5
to
27
22
19
145
EN 50 045
42
35
29
220
12
12
9
80
18
18
14
115
25
25
18
155
TS 35/7.5
29
29
21
180
to
34
34
26
215
EN 50 022
37
37
28
230
46
46
35
290
51
51
39
320
Rail
TS 15/5.5
For
enclosure
width
mm
125
175
250
122
160
200
220
260
280
330
360
Packs Model No.
of
GA
10
10
10
5
5
5
5
5
5
5
5
9105.150
9106.150
9107.150
9108.350
9112.350
9116.350
9110.350
9113.350
9117.350
9118.350
9111.350
TS 35/7.5
35
10
7.5
10.5
5.5
1
1
15
27
Rittal Small Enclosures
Cast aluminium enclosures GA
Accessories
Wall mounting bracket
For external mounting to surfaces – no need
to dismantle the lid if pre-assembled.
Material:
Sheet steel, zinc-plated, passivated
Hinge, exterior
For fastening the lid to the enclosure base,
complete with drilling template.
Material:
Die-cast aluminium
Colour:
RAL 7001
Cover screws,
prepared for lead seal
to protect against unauthorised opening.
Two per cover are required.
Material:
Stainless steel
Rittal Small Enclosures
For
enclosures
GA 9108.210
GA 9110.210
GA 9111.210
GA 9112.210
GA 9113.210
GA 9114.210
GA 9116.210
GA 9117.210
GA 9118.210
GA 9119.210
For
enclosures
GA 9105.210
GA 9106.210
GA 9107.210
GA 9108.210
GA 9110.210
GA 9111.210
GA 9112.210
GA 9113.210
GA 9114.210
GA 9116.210
GA 9117.210
GA 9118.210
GA 9119.210
For
enclosures
GA 9104.210
GA 9105.210
GA 9106.210
GA 9107.210
Packs of Model No. GA
2
9121.122
2
9121.160
2
9121.230
Packs of Model No. GA
2
+ 8 screws
9123.100
2
+ 8 screws
9123.000
Packs of Model No. GA
6
9122.424
11
A very
special “twist”!
New and practical: The lid may be opened or reliably sealed in a flash, with the new quick-action
screw. A 1/4 rotation instead of x number of tapped threads additionally ensures optimum
contact pressure for the seal.
This improvement will be added to the following products
– Terminal boxes KL, page 13, KL stainless steel, page 15
– Bus enclosures BG, based on KL, page 22, BG stainless steel, page 26
for even greater time and cost savings during assembly and servicing.
12
Rittal Small Enclosures
Terminal boxes KL
Without gland plate, depth: 80/120
H1
T1
B1
Material:
Enclosure:
Sheet steel 1.25 mm;
1.38 mm for KL 1507.510 to
KL 1513.510
Cover:
Sheet steel 1.25 mm
Depth 80 mm
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. KL
Weight (kg)
Depth 120 mm
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. KL
Weight (kg)
P. of
1
P. of
1
Surface finish:
Case and cover:
Dipcoat primed,
powder-coated on the
outside in textured RAL 7035
150
150
80
1514.510
1.4
200
150
80
1528.510
1.6
Protection category:
IP 66 to EN 60 529/10.91,
complies with NEMA 4.
Supply includes:
Enclosure, cover with allround foamed-in PU seal
and quick-action screws,
including plastic bushes.
200
200
80
1516.510
1.9
300
150
80
1515.510
2.1
300
200
80
1517.510
2.6
Approvals:
● UL
● CSA
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
400
200
80
1518.510
3.2
600
200
80
1519.510
4.6
150
200
200
300
300
300
400
400
400
150
150
200
150
200
300
150
200
300
120
120
120
120
120
120
120
120
120
1500.510 1529.510 1502.510 1501.510 1503.510 1507.510 1589.510 1504.510 1508.510
1.6
1.8
2.3
2.6
3.0
4.0
3.2
3.6
4.8
Width (B1) in mm
P. of
400
500
500
600
600
600
800
800
Height (H1) in mm
400
200
300
200
300
400
200
400
Depth (T1) in mm
120
120
120
120
120
120
120
120
Model No. KL
1
1511.510 1505.510 1509.510 1506.510 1510.510 1512.510 1527.510 1513.510
Weight (kg)
6.2
4.4
5.8
5.7
6.8
8.4
6.8
11.0
To order terminal boxes in textured RAL 7032 please add extension .210 to the Model No., and for primed terminal
boxes use extension .310. Delivery times available on request.
Cover retainer
Cover hinge
The cover retainer is easily
fitted without drilling, and
allows the covers to be
opened upwards, even when
the terminal box below is
bayed.
The cover hinge is simply
screwed to the box
protection channel and to
the edge fold.
German patent
no. P 33 40 491
Packs of
3 pairs
Model No. KL
1591.000
Packs of
6
Model No. KL
1592.000
General accessories from page 40
Rittal Small Enclosures
13
Terminal boxes KL
With gland plate, depth 120
H1
T1
H1
T1
B1
Material:
Enclosure:
Sheet steel 1.38 mm;
1.25 mm for KL 1530.510 to
KL 1534.510 and
KL 1542.510
Cover:
Sheet steel 1.25 mm
Surface finish:
Case and cover:
Dipcoat primed,
powder-coated on the
outside in textured RAL 7035
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. KL
Weight (kg)
Gland plate
(top + bottom)
Gland plate
(left + right)
Protection category:
IP 55 to EN 60 529/10.91,
complies with NEMA 12.
Supply includes:
Enclosures with gland
apertures, cover with
foamed-in special seal and
quick-action screws
including plastic bushes,
sheet steel gland plates with
seals and assembly parts.
Packs of
1
B1
Approvals:
● UL
● CSA
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
300
150
120
1530.510
2.7
300
200
120
1531.510
3.3
300
300
120
1535.510
4.5
400
200
120
1532.510
4.0
400
300
120
1536.510
5.2
400
400
120
1539.510
6.7
1+1
1+1
1+1
1+1
1+1
1+1
–
–
1+1
–
1+1
1+1
Width (B1) in mm
Packs of
500
500
600
600
600
800
800
Height (H1) in mm
200
300
200
300
400
200
400
Depth (T1) in mm
120
120
120
120
120
120
120
Model No. KL
1
1533.510 1537.510 1534.510 1538.510 1540.510 1542.510 1541.510
Weight (kg)
4.9
5.2
5.9
7.7
9.0
7.2
12.0
Gland plate
2+2
2+2
2+2
2+2
2+2
3+3
3+3
(top + bottom)
Gland plate
–
1+1
–
1+1
1+1
–
1+1
(left + right)
To order terminal boxes in textured RAL 7032 please add extension .210 to the Model No., and for primed terminal
boxes use extension .310. Delivery times available on request.
General accessories from page 40
14
Rittal Small Enclosures
Terminal boxes KL
Stainless steel
H1
T1
B1
Material:
Stainless steel 1.4301
(AISI 304)
Enclosure: 1.25 mm
Cover: 1.25 mm
Surface finish:
Case and cover:
Brushed, grain 180
Protection category:
IP 66 to EN 60 529/10.91,
complies with NEMA 4X
Supply includes:
Enclosure, cover with allround foamed-in PU seal
and quick-action screws,
including plastic bushes.
Approvals:
● UL
● CSA
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
Width (B1) in mm
Packs of
150
300
200
300
Height (H1) in mm
150
150
200
200
Depth (T1) in mm
80
80
80
80
Model No. KL
1
1521.010
1522.010
1523.010
1524.010
Weight (kg)
1.3
1.8
1.8
2.4
Quick-action screws
4
4
4
4
To order terminal boxes in 1.4404 (AISI 316L), please add extension .510 to the Model No.
Delivery times available on request.
400
200
120
1525.010
3.6
4
300
300
120
1526.010
3.9
4
General accessories from page 40
Rittal Small Enclosures
15
Premium Line KL
Protection category IP 69K, stainless steel
H1
T1
B1
A new design, a new
concept for the seal and
lock
● Resistant to highpressure cleaning
(protection category
IP 69K). The seal lies
between two seals and is
ideally compressed by the
screw fastening.
● Suitable for clean room
use.
Optional screw fastening
to comply with high
standards in the food and
hygiene sectors:
1 external with hex screws
2 internal with plastic
stoppers
● Optimum
EMC conditions.
The labyrinthine seal
achieves a particularly
high level of RF shielding
of the enclosure.
● Accessibility.
Internal rear panel bracket.
This solution is clearly
superior to external hinges
from a hygiene point of
view.
● Wall mounting can be
implemented directly from
the rear using M8 pull-in
nuts, or from the front
using wall mounting
brackets.
Material:
Stainless steel 1.4301
(AISI 304), 1.5 mm
Surface finish:
Brushed, grain 240
Protection category:
IP 69K to
DIN 40 050-9/5.93
Rittal service:
Other sizes and other
enclosures with this sealing
concept are available on
request.
Cut-outs and drilled holes to
your specifications.
Width (B1) in mm
Packs of
150
150
300
Height (H1) in mm
150
150
200
Depth (T1) in mm
80
120
120
Model No. KL
1
1024.010
1024.020
1024.030
Quick-action screws
4
4
6
To order Premium Line KL in 1.4404 (AISI 316L), please add extension .5X0 to the Model No.
Delivery times available on request.
400
300
120
1024.040
10
General accessories from page 40
16
Rittal Small Enclosures
E-Box EB
F1
G1
H1
T1
B1
Material:
Sheet steel
Enclosure: 1.25 mm
1.38 mm for
EB 1555.500,
EB 1556.500,
EB 1577.500 to
EB 1579.500
Depth 80 mm
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Mtg. plate width (F1) mm
Mtg. plate height (G1) mm
Model No. EB
Weight (kg)
Depth 120 mm
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Mtg. plate width (F1) mm
Mtg. plate height (G1) mm
Model No. EB
Weight (kg)
Surface finish:
Enclosure and door:
Dipcoat primed,
powder-coated on the
outside in textured RAL 7035
Mounting plate: Zinc-plated
P. of
150
150
80
125
135
1551.500
1.7
1
P. of
1
Protection category:
IP 66 to EN 60 529/10.91
Supply includes:
Enclosure with mounting
plate,
door including 180° hinges
and cam lock with double-bit
insert.
150
300
80
125
285
1545.500
2.6
200
200
80
175
185
1546.500
2.4
Approvals:
● UL
● CSA
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
200
300
80
175
285
1552.500
3.2
200
400
80
175
385
1547.500
4.4
150
150
200
200
200
300
300
200
150
300
200
300
400
300
400
500
120
120
120
120
120
120
120
120
125
125
175
175
175
275
275
175
135
285
185
285
385
285
385
485
1553.500 1548.500 1549.500 1554.500 1550.500 1555.500 1556.500 1557.500
2.0
3.0
2.8
3.6
5.0
5.0
6.4
6.2
Depth 155 mm
Width (B1) in mm
P. of
300
300
300
Height (H1) in mm
400
600
800
Depth (T1) in mm
155
155
155
Mtg. plate width (F1) mm
275
275
275
Mtg. plate height (G1) mm
385
585
785
Model No. EB
1
1577.500
1578.500
1579.500
Weight (kg)
7.1
11.0
13.2
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 47,
lock cylinder inserts, plastic handles and T handles, type B, see page 47/48.
To order terminal boxes in textured RAL 7032 please add extension .600 to the Model No., and for primed terminal
boxes use extension .310. Delivery times available on request.
General accessories from page 40
Rittal Small Enclosures
17
RiLAN Industrial
Enclosures
Empty enclosure for industrial
distributor
0
21
W x H x D: 600 x 760 x 210 mm
Offers space for Ethernet connection of 24
subscribers with patch panel.
Material:
Sheet steel
Surface finish:
Enclosure and door:
Dipcoat primed, powder-coated in textured
RAL 7035 on the outside,
Mounting plate: Zinc-plated
Protection category:
IP 56/54 to EN 60 529
(depending on the gland plate fitted).
Supply includes:
Enclosure, one-door, without gland plate in
the enclosure base, r/h door hinge, with
2 cam locks, polycarbonate viewing panel,
foamed-in door seal, mounting plate.
60
760
140
0
0
48
Empty enclosure for industrial
distributor
W x H x D: 600 x 300 x 125 mm
Provides space for Ethernet connection of
● up to 24 users without patch panel
● up to 12 users with patch panel.
5
12
60
50
110
300
0
53
5
0
12
18
Material:
Sheet steel
Surface finish:
Case and cover:
Dipcoat primed, powder-coated in textured
RAL 7035 on the outside
Protection category:
IP 65 to EN 60 529
(with fitted gland plate)
Supply includes:
Enclosure, without gland plate in the
enclosure base, lid hinged at the bottom,
opening angle of lid limited to 90° by a
retaining cord, 3 quick-release fasteners for
screwdrivers, polycarbonate viewing panel,
foamed-in lid seal, 2 fitted support rails
TS 35/7.5 (590 and 150 mm long), 3 fitted
cable shunting rings DK 7112.000.
Packs of
Model No. IN
1
1076.2901)
1) Stainless steel and plastic versions
available on request.
Accessories:
Packs
of
Solid
1
Pre-punched
1
With cable glands
1
With grommets
1
Metal gland plate
Model No.
Page
IN
2563.150 20
2203.010 20
2203.020 20
2203.030 20
Rittal service:
Mounting of components available from
Rittal.
Cut-outs e. g. for
interface flaps, see page 69 and
signal pillars, see Catalogue 31, page 1041.
Packs of
1
Model No. IN
1510.280
Accessories:
Packs
of
Solid
1
Pre-punched
1
With cable glands
1
Metal gland plate
Model No.
Page
IN
2207.010 20
2207.020 20
2207.030 20
Rittal service:
Mounting of components available from
Rittal.
Cut-outs e. g. for
interface flaps, see page 69 and
signal pillars, see Catalogue 31, page 1041.
Rittal Small Enclosures
RiLAN Industrial
Junction boxes
Junction box IP 67
Plastic
Junction box with PROFINET-compatible
RJ 45 connector. For use in areas with more
demanding requirements in terms of
protection category, such as
● Industrial plant
● Warehouses and assembly halls
● Laboratories and workshops
Design:
● Robust enclosure for surface-mounting
● 2 RJ 45 jacks for cable AWG 22 – 24
(solid/flexible), Category 6 to
ISO/IEC 11801:2002 and EN 50 173-1
● Cable infeed from above or below via
cable glands
● Integral cable manager for secure cable
routing
● Insulation stripping aid
● Protective flaps, captive, self-closing
● Option for adding a lead seal
● Watertight label panel.
Junction box IP 65
Cast aluminium
Robust junction box for use in areas with
more demanding requirements in terms of
protection category and impact resistance.
The RJ 45 connector is recommended by
the IAONA.
Design:
● Robust enclosure for surface-mounting
● 2 side slots RJ 45 (right)
Category 5 to ISO/IEC 11801:2002 and
EN 50 173-1
● Connection via LSA connection strips on
PCB
● Cable infeed via two M20 cable glands,
capacity 5 – 13 mm.
Rittal Small Enclosures
Packs of
1
Model No. IN
2203.500
Dimensions:
W x H x D: 90 x 152 x 69 mm
Material:
Polycarbonate, impact-resistant, halogenfree, UL 94-V0
Colour:
RAL 9011
Protection category:
IP 67 to EN 60 529
Supply includes:
Enclosure with cable manager,
2 RJ 45 jacks, 2 cable glands,
1 sealing bung, assembly instructions.
Packs of
1
Model No. IN
2203.600
Dimensions:
W x H x D: 80 x 125 x 57 mm (enclosure
only)
Material:
Cast aluminium
Colour:
RAL 7035
Protection category:
IP 65 EN 60 529
Supply includes:
Enclosure with PCB and integral
RJ 45 jacks, 2 cable glands M20,
1 sealing bung.
19
RiLAN Industrial
Accessories
Metal gland plates
solid/prepunched/
with cable glands
Design:
● Solid
● With 27 prepunchings for cable glands
M20 x 1.5.
Simply knock out the holes using a
screwdriver.
● With 27 polyamide cable glands
M20 x 1.5.
Material:
Sheet steel
Colour:
Textured RAL 7035
Protection category:
IP 66 to EN 60 529
when mounting in the usual position, bottom.
For IN
1076.290
Packs Model No.
of
IN
Solid
1
2563.150
534 x 149 Pre-punched
1
2203.010
mm
With cable
1
2203.020
glands
For IN
1510.280
555 x 92
mm
Design
Packs Model No.
of
IN
Solid
1
2207.010
Pre-punched
1
2207.020
With cable
1
2207.030
glands
Design
Accessories:
Sealing bungs for sealing any cable glands
that are not required, see page 66.
Cable glands M20 x 1.5, see page 65.
Rittal service:
Cutouts for other interfaces.
Metal gland plate
with grommets
For IN 1076.290
534 x 149 mm
Packs of Model No. IN
1
2203.030
Design:
Including 4 inserts each with 8 grommets for
cable diameters up to 13 mm.
Material:
Gland plate: Sheet steel, zinc-plated,
passivated
Cable entry grommet:
Body: Polypropylene.
Cover: Thermoplastic elastomer.
Protection category:
IP 54 to EN 60 529
when mounting in the usual position, bottom.
20
Rittal Small Enclosures
RiLAN Industrial
Accessories
Patch panels
With slots, prepared for cable clamping with
cable ties SZ 2597.000.
Design:
Suitable for direct attachment on mounting
plates and, by using mounting clip
SZ 2309.000, also on support rails.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
Accessories:
Mounting clip SZ 2309.000
see page 53.
Cable tie SZ 2597.000
see page 68.
Packs
of
Manufacturer
Usable modules
ADC KRONE
BTR
Corning Cable
Systems
RJ 45 KM8 STP
RJ 45 E-DAT module 8 (8) Cat. 6
RJ 45 FutureComTM S250
module
RJ 45 unilan® module MS 1/8
Cat. 6
RJ 45 connection module
Cat. 5e and Cat. 6,
fibre-optic couplings SC-RJ
and E2000TM Compact
(via module recess)
Dätwyler
Reichle & DeMassari (R&M)
Model No. IN
2 slots
8 slots
2203.260 2203.270
2203.200 2203.210
1
1
1 slot
–
–
1
–
2203.220 2203.230
1
–
2203.200 2203.210
1
2203.110 2203.120 2203.160
Tyco Electronics
RJ45 SL series
Corporation
1
–
2203.240 2203.250
(Toolless Jacks, 110Connect
(AMP
Jacks, AMP-TWIST-6S Jacks)
NETCONNECT)
FutureCom is a brand name of Corning Cable Systems Brands, Inc.
unilan is a registered trademark of Dätwyler Kabel+Systeme.
AMP NETCONNECT and AMP-TWIST are brand names of Tyco Electronics Corporation.
Fibre-optic splicing cassette
support
To accommodate up to 4 splicing cassettes
to DIN 47 662.
The cassettes may be removed individually,
to avoid damaging intact connections during
maintenance work.
May be installed in two positions on the
mounting plate or on punched sections, to
ensure space-saving integration.
There is plenty of space for buffered fibres.
Strain relief of buffered fibres and cable
pigtails may be provided from above and
below using cable ties.
Nylon loop
Ensures orderly cable routing.
Supplied on a reel for cutting to the required
length.
Unlike cable ties,
● protects the cable sheathing
● easily reopened
● reusable
Rittal Small Enclosures
Packs Model No.
of
IN
Holder and support
for 1 splicing cassette
(maximum
configuration:
4 supports)
Support for 1 splicing
cassette (extension)
1
2203.300
1
2203.310
Dimensions:
W x H x D: 104 x 250 x 165 mm
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
Length
mm
5000
Width
mm
16
Packs Model No.
of
IN
1
2203.400
21
Bus enclosures BG
Bus enclosure
Material:
Sheet steel
Enclosure: 1.38 mm
Door: 1.5 mm
Viewing window made from polycarbonate,
4 mm
Surface finish:
Enclosure and door:
Powder coated in textured RAL 7035
Protection category:
IP 65 to EN 60 529/10.91
Supply includes:
Door hinged on the left,
1 cam lock with double-bit insert,
2 (1) support rail(s) TS 35/7.5
(for BG 1586.510).
Drilled holes for cable glands in the base.
Approvals:
● TÜV
● Lloyds Register of Shipping
● VDE
● UL
● C-UL
Accessories:
B
76
181
300
Cable glands made from polyamide or
brass, see page 65.
PG version
Dimensions
mm
B
Metric version
Number
of metric
Model No.
Model No.
holes
BG
BG
M12 M20 M25
1583.510
2
5
2
1583.520
1584.510
2
9
2
1584.520
1585.510
2
13
3
1585.520
1586.510
3
24
–
1586.520
W (B) H D (T) 9
11 13.5 16
21
200 300 80
1
8
–
1
1
300 300 80
1
14
–
1
1
400 300 80
1
18
–
1
2
500 300 80
3
–
24
–
–
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
see page 47 and plastic handles, type B, see page 47.
To order enclosures in RAL 7032, please add the extension .210 or .220 to the
Model No. Delivery times available on request.
76
181
300
T
Number
of PG holes
224
300
119
B
T
224
300
119
B
22
Rittal Small Enclosures
Bus enclosures BG
Bus enclosure
Material:
Sheet steel
Enclosure: 1.38 mm
Door: 1.5 mm
Viewing window made from polycarbonate,
4 mm
Surface finish:
Enclosure and door:
Powder coated in textured RAL 7035
B
300
135
Dimensions
mm
PG version
Metric version
Number
Number
Model
No.
Model No.
of PG holes
of metric holes
BG
BG
13.5 29
36
M12 M20 M32 M50
–
5
–
1605.510
2
–
5
–
1605.520
2
9
1
1606.510
–
2
9
1
1606.520
W (B) H D (T) 9
200 300 120
2
400 300 120
–
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
see page 47 and plastic handles, type B, see page 47.
To order enclosures in RAL 7032, please add the extension .210 or .220 to the
Model No. Delivery times available on request.
B
300
135
T
Bus enclosure
200
100
B
B
200
100
T
Protection category:
IP 65 to EN 60 529/10.91
Supply includes:
Door with r/h hinge,
1 cam lock with double-bit insert,
1 support rail TS 35 /7.5.
Drilled holes for cable glands in the base.
Approvals:
● TÜV
● Lloyds Register of Shipping
● VDE
● UL
● C-UL
Rittal Small Enclosures
Material:
Sheet steel
Enclosure: 1.38 mm
Door: 1.5 mm
Viewing window made from polycarbonate,
4 mm
Surface finish:
Enclosure and door:
Dipcoat primed, powder coated
Textured RAL 7035
Protection category:
IP 65 to EN 60 529/10.91
Dimensions mm
Model No. BG
W (B)
H
D (T)
400
200
125
1558.510
600
200
125
1559.510
To order enclosures in RAL 7032, please
add the extension .210 to the Model No.
Delivery times available on request.
Supply includes:
Door with bottom hinge,
2 (3) quick-release fasteners for
screwdrivers (with BG 1559.510),
1 support rail TS 35 /7.5,
1 gland plate at bottom.
Holes for cable glands in the gland plate or
directly in the enclosure available on
request.
Approvals:
● TÜV
● Lloyds Register of Shipping
● VDE
● UL
● C-UL
23
Bus enclosures BG
Bus enclosure
F1
H1
H
G1
B
H2
F1
T
Material:
Sheet steel
Enclosure: 1.38 mm
Door: 1.5 mm
Polycarbonate viewing window
Zinc-plated mounting plate
Surface finish:
Enclosure and door:
Powder coated in textured RAL 7035
Supply includes:
Door with bottom hinge,
cam lock with double-bit insert
may be exchanged for lock inserts,
type A, page 47 and plastic handles, type B,
page 47.
Approvals:
● TÜV
● Lloyds Register of Shipping
● VDE
● UL
● C-UL
H
G1
B
B = Width
T = Depth
Bus enclosure
440
500
200
100
B
Bus enclosure modifications
Viewing window and gland plates, see table.
Height of
viewing
window
mm
Gland plate
Model No. BG
cut-out2)
at bottom
(clearance
width) mm Basic ExtenH1
H2
sion
327 x 97
1577.
527 x 97
1578.
2 off 327 x 97 1579.
115
92
–
.5201)
190
42
–
.5301)
.5501)
115
92
.5601)
190
42
155
92
–
.4501)
1) Extended delivery times.
2) Gland plates 14 mm larger all-round.
Dimensions
Number of
Model No.
mm
holes for
BG
B
H
T PG 13.5 or M20
400 500 160
33
1611.510
To order enclosures in RAL 7032, please
add the extension .210 to the Model No.
Delivery times available on request.
Supply includes:
Door with r/h hinge,
1 cam lock with 3 mm double-bit insert, may
be exchanged for type A lock inserts,
page 47 and type B plastic handles,
page 47.
3 support rails TS 35 /7.5.
Drilled holes for cable glands in the base.
B
440
500
200
100
T
Material:
Sheet steel
Enclosure: 1.38 mm
Door: 1.5 mm
Viewing window made from polycarbonate,
4 mm
Surface finish:
Enclosure and door:
Powder coated in textured RAL 7035
Approvals:
● TÜV
● Lloyds Register of Shipping
● VDE
● UL
● C-UL
Dimensions mm
Mounting Cam Model No.
plate
lock
EB
B
H
T
F1 G1
400 300 155 385 275
1
1577.500
600 300 155 585 275
2
1578.500
800 300 155 785 275
2
1579.500
To order enclosures in RAL 7032, please
add the extension .600 to the Model No.
Delivery times available on request.
Enclosures
B = Width
T = Depth
24
Rittal Small Enclosures
Bus enclosures BG
Bus enclosure
300
115
B
Material:
Sheet steel
Enclosure: 1.38 mm
Door: 1.5 mm
Viewing window made from polycarbonate,
4 mm
Surface finish:
Enclosure and door:
Powder coated in textured RAL 7035
Approvals:
● TÜV
● Lloyds Register of Shipping
● VDE
● UL
● C-UL
Dimensions
Number of
Model No.
mm
holes for
BG
B
H
T PG 13.5 or M20
500 300 120
48
1609.510
To order enclosures in RAL 7032, please
add the extension .210 to the Model No.
Delivery times available on request.
Supply includes:
Door with bottom hinge,
2 quick-release fasteners for screwdrivers,
1 support rail TS 35 /7.5.
Drilled holes for cable glands in the base.
T
300
115
B
B = Width
T = Depth
Bus enclosure
for modular cable entry
50
440
232
132
500
0
T
Material:
Sheet steel
Enclosure: 1.38 mm
Door: 1.5 mm
Viewing window made from polycarbonate,
4 mm
Surface finish:
Enclosure and door:
Powder coated in textured RAL 7035
Protection category:
IP 55 to EN 60 529/10.91
(in conjunction with module plates)
Approvals:
● TÜV
● Lloyds Register of Shipping
● VDE
● UL
● C-UL
Width
mm
500
Height
mm
500
Depth
mm
210
Model No.
BG
1050.900
Supply includes:
18 cut-outs in the base for module plates,
Pre-configured top-hat rail for bus systems
(I/O modules, motor starters) and terminal
blocks.
Door with viewing panel for visual monitoring
of the installed components.
Also required:
Module plates,
see page 64.
50
132
440
232
500
0
Rittal Small Enclosures
25
Bus enclosures BG
Stainless steel
Bus enclosure
Protection category:
IP 66 to EN 60 529/10.91,
complies with NEMA 4X
Supply includes:
Enclosure with 1 support rail TS 35/7.5,
cover with foamed in seal,
180° hinges with quick-release fasteners.
Stainless steel
Material:
Stainless steel 1.4301 (AISI 304)
Enclosure: 1.25 mm
Cover: 1.25 mm
Hinges: Die-cast zinc
Surface finish:
Case and cover:
Brushed, grain 180
Hinges: plated
Width (B1) in mm
Packs
of
200
300
400
400
600
Height (H1) in mm
300
300
300
200
200
Depth (T1) in mm
80
80
80
123
123
Model No. BG
1
1583.0101) 1584.0101) 1585.0101) 1558.0102) 1559.0102)
Weight (kg)
2.8
3.7
4.5
4.5
6.0
To order bus enclosures in 1.4404 (AISI 316L), please add extension .500 to the
Model No. Delivery times available on request.
1) Support rail attached to studs
2) Support rail adjustable on profile strip
T1
B1
B1
26
H1
H1
H1
100
135
135
B1
Rittal Small Enclosures
Compact enclosures AE
Width: 200 – 600, height: 300 – 400
F1
F1
T1
Material:
Sheet steel
Surface finish:
Enclosure and door:
Dipcoat primed,
powder-coated on the
outside in textured RAL 7035
Mounting plate: Zinc-plated
Width (B1) in mm
Protection category:
IP 66 to EN 60 529/10.91
Complies with NEMA 12.
(AE 1032.500, AE 1035.500)
Complies with NEMA 4.
(AE 1030.500, AE 1031.500,
AE 1380.500, AE 1039.500
AE 1339.500)
Packs
of
200
200
300
H1
H1
G1
B1
G1
B1
Supply includes:
Enclosure of all-round solid
construction, single door,
1 gland plate in the
enclosure base, r/h door
hinge, may be swapped to
opposite side (except with
AE 1032.500 and
AE 1035.600), with one cam
lock, foamed-in door seal,
mounting plate.
300
380
380
Approvals:
● UL
● CSA
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
380
600
600
Height (H1) in mm
300
300
300
400
300
300
380
380
380
Depth (T1) in mm
120
155
210
210
155
210
210
210
350
Mounting plate width
162
162
254
254
334
334
334
549
549
(F1) mm
Mounting plate height
275
275
275
375
275
275
355
355
355
(G1) mm
Mtg. plate thickness mm
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
Model No. AE
1 1032.500 1035.500 1033.500 1034.500 1030.500 1031.500 1380.500 1039.500 1339.500
Weight (kg)
4.0
4.5
7.0
8.8
7.4
7.5
9.8
15.4
20.0
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
see page 47, lock cylinder, plastic handles and T handles, type B, see page 47.
To order enclosures in textured RAL 7032 please add extension .600 to the Model No., and for primed enclosures use
extension .800. Delivery times available on request.
General accessories from page 40
Rittal Small Enclosures
27
Compact enclosures AE
Width: 380 – 800, height: 500 – 1000
F1
F1
T1
B1
Material:
Sheet steel
Surface finish:
Enclosure and door:
Dipcoat primed,
powder-coated on the
outside in textured RAL 7035
Mounting plate: Zinc-plated
Width (B1) in mm
Protection category:
to EN 60 529/10.91:
IP 56,
IP 66 for AE 1038.500,
AE 1338.500, AE 1045.500,
AE 1050.500, AE 1350.500,
AE 1060.500, AE 1360.500,
complies with NEMA 4.
Packs
of
Height (H1) in mm
Depth (T1) in mm
Mounting plate width (F1) mm
Mounting plate height (G1) mm
Mounting plate thickness mm
Model No. AE
Weight (kg)
Width (B1) in mm
1
Packs
of
380
380
H1
H1
G1
G1
B1
Supply includes:
Enclosure of all-round solid
construction, single door,
1 gland plate in the
enclosure base,
r/h door hinge, may be
swapped to opposite side,
with 2 cam locks, foamed-in
door seal, zinc-plated
mounting plate.
400
500
Approvals:
● UL
● CSA
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
500
500
600
600
600
600
500
500
500
700
600
600
210
350
210
210
300
250
210
350
334
334
354
449
449
449
549
549
570
570
475
470
470
670
570
570
2.5
2.5
2.0
2.5
2.5
3.0
2.5
2.5
1038.500 1338.500 1045.500 1050.500 1350.500 1057.500 1060.500 1360.500
15.6
19.4
13.0
16.8
19.6
31.2
22.8
28.4
600
600
600
600
760
760
800
Height (H1) in mm
760
760
800
1000
760
760
1000
Depth (T1) in mm
210
350
250
250
210
300
300
Mounting plate width (F1) mm
549
549
549
539
704
704
739
Mounting plate height (G1) mm
730
730
770
955
730
730
955
Mounting plate thickness mm
3.0
3.0
3.0
3.0
3.0
3.0
3.0
Model No. AE
1
1076.500 1376.500 1058.500 1090.500 1077.500 1073.500 1180.500
Weight (kg)
32.1
36.0
34.2
50.5
40.0
44.5
57.0
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
see page 47, lock cylinder, plastic handles and T handles, type B, see page 47/48.
To order enclosures in textured RAL 7032 please add extension .600 to the Model No., and for primed enclosures use
extension .800. Delivery times available on request.
General accessories from page 40
28
Rittal Small Enclosures
Compact enclosures AE
Width: 600 – 1000, height: 760 – 1400
F1
F1
T1
B1
H1
G1
H1
G1
B1
Material:
Sheet steel
Enclosure: 1.5 mm
Door: 2.0 mm
Mounting plate: 3.0 mm
Surface finish:
Enclosure and door:
Dipcoat primed,
powder-coated on the
outside in textured RAL 7035
Mounting plate: Zinc-plated
Protection category:
IP 55 to EN 60 529/10.91
Complies with NEMA 12.
IP 56 to EN 60 529/10.91
for AE 1260.500 and
AE 1280.500.
Supply includes:
Enclosure of all-round solid
construction, single door:
1 gland plate, twin-door:
2 gland plates in the
enclosure base,
3-point lock system,
prepared for use of the
Ergoform-S lock system,
2 cam locks for 1100.500,
1130.500, 1110.500,
foamed-in door seal, zincplated mounting plate.
Approvals:
● UL
● CSA
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
Possible
alternative:
Compact System Enclosures
Rittal CM, see page 34.
Width (B1) in mm
Packs of
600
800
1000
1000
1000
1000
1000
Height (H1) in mm
1200
1200
760
760
1000
1200
1400
Depth (T1) in mm
300
300
210
300
300
300
300
Mounting plate width (F1) mm
540
740
944
944
939
940
940
Mounting plate height (G1) mm
1155
1155
730
730
955
1155
1355
Model No. AE
1
1260.500 1280.500 1100.500 1130.500 1110.500 1213.500 1114.500
Door(s)
1
1
2
2
2
2
2
Weight (kg)
55.0
70.0
52.0
56.0
71.0
85.0
97.0
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
see page 47 and Ergoform-S lock system (not for 1100.500, 1130.500, 1110.500), see page 46.
To order enclosures in textured RAL 7032 please add extension .600 to the Model No., and for primed enclosures use
extension .800. Delivery times available on request.
General accessories from page 40
Rittal Small Enclosures
29
Compact enclosures AE
Protection category IP 69K
F1
F1
T1
Perfect protection in a
tough environment
The compact enclosure AE
in IP 69K is the ideal solution
when a high protection
category and corrosion
resistance are needed.
● Resistant to high-pressure
cleaning (protection
category IP 69K). The
interior seal is protected
against direct hosed water.
● Ideal for mounting on
vehicles: Lock, hinges and
mounting plate are all
vibration resistant.
● The enclosure and door
have an aluminium zinc
coating for a high level of
corrosion protection.
● Foamed-in silicone seal,
water-impermeable, with
high resistance to
temperature and
chemicals.
● Prepared to accommodate
the door stay 1101.800
and the interior door.
● Wall mounting
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Mounting plate width (F1) mm
Mounting plate height (G1) mm
Mounting plate thickness mm
Model No. AE
Weight (kg)
Locks
Packs of
1
Material:
Sheet steel
Surface finish:
Enclosure and door:
Aluminium zinc coating,
powder coated in textured
RAL 7035
Mounting plate: Zinc-plated
Protection category:
IP 69K to
DIN 40 050-9/5.93
Supply includes:
Enclosure of all-round solid
construction, single-door,
door hinge may be swapped
to opposite side by rotating
the enclosure, cam lock with
double-bit insert, other
inserts available on request.
230
330
155
162
275
2
1101.010
6.6
1
400
400
250
334
355
2
1101.020
13.8
2
H1
H1
G1
B1
G1
B1
Rittal service:
Other dimensions available
on request. Cut-outs and
drilled holes to your
specifications.
400
650
250
334
570
2.5
1101.030
20
2
650
650
250
549
570
2.5
1101.040
29.6
2
General accessories from page 40
30
Rittal Small Enclosures
Compact enclosures AE
Stainless steel
F1
F1
T1
T1
B1
H1
G1
H1
G1
B1
Material:
Stainless steel 1.4301
(AISI 304)
Enclosure and door:
Stainless steel
Mounting plate: Sheet steel
Cam lock: Die-cast zinc,
nickel-plated
Surface finish:
Enclosure and door:
Brushed, grain 240
Mounting plate: Zinc-plated
Protection category:
IP 66 to EN 60 529/10.91
for AE 1002.600 –
AE 1017.600, complies with
NEMA 4X.
IP 55 to EN 60 529/10.91
for AE 1018.600,
AE 1019.600,
complies with NEMA 12.
Width (B1) in mm
Packs of
200
Height (H1) in mm
300
Depth (T1) in mm
155
Mounting plate width (F1) mm
162
Mounting plate height (G1) mm
275
Model No. AE
1
1002.600
Door(s)
1
Weight (kg)
4.5
Supply includes:
Enclosure, door(s) with
foamed-in PU seal, mounting
plate.
380
300
155
334
275
1004.600
1
8.8
300
380
210
334
275
1005.600
1
8.7
380
380
210
334
355
1006.600
1
12.0
Approvals:
● UL
● CSA
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
500
500
210
449
470
1007.600
1
18.4
500
500
300
449
470
1013.600
1
18.9
380
600
210
334
570
1008.600
1
17.0
Width (B1) in mm
Packs of
600
600
600
760
800
800
1000
1000
Height (H1) in mm
380
600
760
760
1000
1200
1000
1200
Depth (T1) in mm
210
210
210
300
300
300
300
300
Mounting plate width (F1) mm
549
549
549
704
739
–
939
–
Mounting plate height (G1) mm
355
570
730
730
955
–
955
–
Model No. AE
1
1009.600 1010.600 1012.600 1014.600 1016.600 1017.600 1018.600 1019.600
Door(s)
1
1
1
1
1
1
2
2
Weight (kg)
17.0
25.0
31.7
42.5
52.9
70.0
71.0
85.0
Lock systems
Standard double-bit lock insert may be exchanged in enclosures with cam (except AE 1018.600/AE 1019.600) for lock
inserts 41 mm, lock cylinder insert, plastic handles, T-handles, type C, see Cat. 31, page 886 – 889.
With AE 1018.600, may only be exchanged for lock inserts 41 mm, see Cat. 31, page 888.
For enclosures with locking rod, may be exchanged for 27 mm lock inserts, type A, see page 47 and Ergoform-S lock
system, see page 46.
To order enclosures in stainless steel 1.4404 (AISI 316L), please add extension .500 to the Model No.
Delivery times available on request.
General accessories from page 40
Rittal Small Enclosures
31
Plastic enclosures KS
Width: 200 – 500, height: 300 – 600
F1
F1
Material:
Enclosure and door:
Fibreglass-reinforced
unsaturated polyester
Mounting plate: Sheet steel
For KS with viewing window:
Impact resistant glazed
acrylic, 3.0 mm with allround rubber cable clamp
strip
Surface finish:
Enclosure and door:
No after-treatment,
dyed plastic,
similar to RAL 7032
Mounting plate: Zinc-plated
Protection category:
KS without viewing window:
IP 66 to EN 60 529/10.91
Complies with NEMA 4X
KS with viewing window:
IP 56 to EN 60 529/10.91
Complies with NEMA 12
Supply includes:
Enclosure of solid all-round
construction, r/h door hinge,
door hinge may be swapped
to opposite side by rotating
the enclosure, mounting
plate, all-round foamed-in PU
seal in the door,
twin seal on the top and
bottom edges of the door
(integral rain protection
strip), press-fitted
C sections at the sides for
infinitely variable mounting
plate depth adjustment.
Note:
Under the influence of longterm UV radiation (sunlight)
in conjunction with wind and
rain, the surface finish may
become visually impaired.
In other words, the fibreglass portions become
visible on unprotected surfaces. This does not impair
the protection of the installed
electrical components in any
way. All other surface finishes are likewise impaired
by ultraviolet radiation.
If the enclosures cannot be
protected from radiation, e.g.
via a sun canopy, we recommend that they should be
painted with a PUR paint.
Older enclosures where the
surface finish already reveals
visible fibreglass portions
can likewise be treated in
this way after thorough
cleaning.
H1
H1
G1
B1
G1
T1
B1
Of course, all enclosures can
also be supplied spray-finished in RAL colours. For
outdoor siting, we recommend pale shades.
Permissible ambient
temperature:
–30°C to +75°C.
Approvals:
● UL (without viewing
window)
● CSA (without viewing
window)
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
Packs of
Without viewing window
With viewing window
Width (B1) in mm
200
250
300
400
400
500
400
400
500
Height (H1) in mm
300
350
400
400
600
500
400
600
500
Depth (T1) in mm
150
150
200
200
200
300
200
200
300
Mtg. plate width
145
195
245
345
345
417
345
345
417
(F1) mm
Mtg. plate height
250
300
350
350
550
450
350
550
450
(G1) mm
Mtg. plate
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
thickness mm
Model No. KS
1
1423.600 1432.600 1434.600 1444.600 1446.600 1453.600 1448.600 1449.600 1454.600
Door(s)
1
1
1
1
1
1
1
1
1
Weight (kg)
3.0
4.1
6.0
7.9
11.5
12.9
8.0
11.5
13.4
Lock systems
Standard double-bit lock insert may be exchanged for lock inserts, type E, see Cat. 31, page 888,
and plastic handle, type E, KS 1484.000, see Cat. 31, page 886.
General accessories from page 40
32
Rittal Small Enclosures
Plastic enclosures KS
Width: 600 – 1000, height: 600 – 1000
F1
F1
T1
B1
H1
G1
H1
G1
B1
Material:
Enclosure and door:
Fibreglass-reinforced
unsaturated polyester
Mounting plate: Sheet steel
For KS with viewing window:
Impact resistant glazed
acrylic, 3.0 mm with allround rubber cable clamp
strip
Surface finish:
Enclosure and door:
No after-treatment,
dyed plastic,
similar to RAL 7032
Mounting plate: Zinc-plated
Protection category:
KS 1466.600, KS 1468.600:
IP 66 to EN 60 529
Complies with NEMA 4X
KS single-door
without viewing window:
IP 56 to EN 60 529
Complies with NEMA 4X
KS twin-door and
KS with viewing window:
IP 56 to EN 60 529
Complies with NEMA 12
Supply includes:
Enclosure of solid all-round
construction, r/h door hinge,
may be swapped to opposite
side by rotating the
enclosure (only with singledoor models), mounting
plate, all-round foamed-in
PU seal in the door,
twin seal on the top and
bottom edges of the door
(integral rain protection
strip), press-fitted
C sections at the sides for
infinitely variable mounting
plate depth adjustment.
KS 1400.600 additionally
with removable centre bar in
the enclosure.
Note:
Under the influence of longterm UV radiation (sunlight)
in conjunction with wind and
rain, the surface finish may
become visually impaired.
In other words, the fibreglass portions become
visible on unprotected surfaces. This does not impair
the protection of the installed
electrical components in any
way. All other surface finishes are likewise impaired
by ultraviolet radiation.
If the enclosures cannot be
protected from radiation, e.g.
via a sun canopy, we recommend that they should be
painted with a PUR paint.
Older enclosures where the
surface finish already reveals
visible fibreglass portions
can likewise be treated in
this way after thorough
cleaning.
Of course, all enclosures can
also be supplied spray-finished in RAL colours. For
outdoor siting, we recommend pale shades.
Permissible ambient
temperature:
–30°C to +75°C.
Approvals:
● UL (without viewing
window)
● CSA (without viewing
window)
● TÜV
● Germanischer Lloyd
● Norske Veritas
● Russian Maritime Register
of Shipping
● Lloyds Register
of Shipping
● Bureau Veritas
● VDE
Packs of
Without viewing window
With viewing window
Width (B1) in mm
600
600
800
1000
600
600
800
Height (H1) in mm
600
800
1000
1000
600
800
1000
Depth (T1) in mm
200
300
300
300
200
300
300
Mounting plate width (F1) mm
545
517
717
917
545
517
717
Mounting plate height (G1) mm
550
750
950
950
550
750
950
Mounting plate thickness mm
2.5
3.0
3.0
3.0
2.5
3.0
3.0
Model No. KS
1
1466.600 1468.600 1480.600 1400.600 1467.600 1469.600 1479.600
Door(s)
1
1
1
2
1
1
1
Weight (kg)
15.9
26.0
39.0
50.0
15.9
25.5
33.0
Lock systems
Standard double-bit lock insert may be exchanged for lock inserts, type E, see Cat. 31, page 888,
and Ergoform-S lock system, KS 1490.000, see page 46.
General accessories from page 40
Rittal Small Enclosures
33
Compact system enclosures Rittal CM
Width: 600 – 1200, height: 800 – 1400
F
F
T
B
H
G
H
G
B
T
Material:
Sheet steel
Enclosure: 1.5 mm
Door: 2.0 mm
Mounting plate: 3.0 mm
Surface finish:
Enclosure and door:
Dipcoat primed,
powder-coated on the
outside in textured RAL 7035
Mounting plate: Zinc-plated
Protection category:
IP 55 with selection of the
appropriate gland plates,
see page 35.
Width (B) mm
Height (H) in mm
Depth (T) in mm
Mounting plate width (F) in mm
Mounting plate height (G) in mm
Model No. CM
Door
Width (B) mm
Packs
of
1
Packs
of
600
Supply includes:
Enclosure with one door, r/h
door hinge, may be
swapped to opposite side,
mounting plate,
open base for individual
cable entry,
see page 35.
600
600
600
800
800
800
800
800
1000
1200
1200
1000
1000
1200
1200
400
400
300
400
300
400
300
400
540
540
540
540
740
740
740
740
755
955
1155
1155
955
955
1155
1155
5110.500 5111.500 5112.500 5113.500 5114.500 5115.500 5116.500 5117.500
1
1
1
1
1
1
1
1
1000
1000
1000
1000
1000
1200
Height (H) in mm
1000
1200
1200
1400
1400
1200
Depth (T) in mm
300
300
400
300
400
400
Mounting plate width (F) in mm
940
940
940
940
940
1140
Mounting plate height (G) in mm
955
1155
1155
1355
1355
1155
Model No. CM
1
5118.500
5119.500
5120.500
5121.500
5122.500
5123.500
Doors
2
2
2
2
2
2
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 47,
and folding lever handle, see page 37.
To order primed enclosures, please add extension .800 to the Model No. Delivery times available on request.
Compact system enclosures Rittal CM accessories from page 35 General accessories from page 40
34
Rittal Small Enclosures
Compact system enclosures Rittal CM
Accessories
Design
Gland plates
Select suitable gland plates depending on
the application. The following examples
illustrate the individuality of cable entry
design. Potential equalisation is provided via
assembly components and earthing points.
1
2
3
4
6
Combination options:
One-piece/
Cable gland
8
Divided/
Cable gland
2 8
Divided/
Cable clamp
strip, centre
1
Divided/
Cable clamp
strip, rear
3
4
1
5
9
1
2
Divided/
1 x grommets
3
1
2
5
Key:
1 Gland plate, depth 50 mm
2 Gland plate, depth 100 mm
3 Gland plate, depth 150 mm
4 Gland plate, depth 250 mm
5 Section for cable entry, centre,
see Cat. 31, page 965.
6 Cable entry plate, depth 100 mm,
see above.
Grommets, see Cat. 31, page 965
7 EMC gland plate,
see Cat. 31, page 958.
8 Cable glands,
see Cat. 31, page 972.
9 Section for cable entry, rear,
see page 61.
2
6
3
Divided/
2 x grommets
6
6
EMC
7
1
Material:
Sheet steel, zinc-plated, passivated
Protection category:
IP 55 if mounted correctly.
Supply includes:
1 piece, including assembly parts.
Note:
For greater stability and universal cable
entry, the base opening is divided in the
width for 1000 and 1200 mm wide
enclosures, and is suitable for various
configurations.
3
2
9
6
entry grommets see Cat. 31,
page 965.
8
5
9
Divided/
Cable clamp
strip, centre and
rear
5001.210 5001.211 5001.212 5001.213
5001.214 5001.215 5001.216 5001.217
5001.218 5001.219 5001.220 5001.221
5001.222 5001.223 5001.224 5001.225
5001.2261) 5001.2271) 5001.2281) 5001.2291)
8
2 8
1
1200
1) Cable
Depth 400 mm
Depth 300 mm
600
For enclosure width
mm
800
1000
Model No.
1
2
Order example:
CM 5120.500
(W/H/D 1000 x 1200 x 400 mm)
– On the left, two-piece gland plates with
cable clamp strip
– On the right, one-piece gland plate
5
1
3
4
You will need:
5
1
3
4
Rittal Small Enclosures
2 sections for cable entry, centre,
TS 8802.100, see Cat. 31, page 965
(Packs of 4)
1 gland plate, depth 50 mm, 5001.212
1 gland plate, depth 150 mm, 5001.220
1 gland plate, depth 250 mm, 5001.224
35
Compact system enclosures Rittal CM
Accessories
Cover plate
For enclosure
W (B) mm
D (T) mm
600
800
300
1000
600
800
400
1000
1200
To conceal the entire base opening or as a
lid with a fitted enclosure rotated through
180°.
Material:
Sheet steel
Colour:
Textured RAL 7035
Supply includes:
Assembly parts.
Model No.
CM
5001.100
5001.110
5001.120
5001.130
5001.140
5001.150
5001.160
T - 25.5
280
1
2
2
Cable clamp rail
C section
For strain relief with cable entry.
The length of the cable clamp rail is tailored
to the width of the CM and TS mounting
plate. The mounting bracket included with
the supply supports three different
installation situations on the mounting plate:
1
2
3
1
3
36
2
straight, at a distance of 23 mm from the
mounting plate
straight, at a distance of 10 mm from the
mounting plate
tilted, towards the mounting plate
Material:
Sheet steel
Surface finish:
Zinc plated, passivated
Supply includes:
Two mounting brackets and assembly
screws.
M8 x 30
106.5
32.5
1
20
20.25
2
12.5
56.5
B
12.5
M6 x 12 only with enclosure width 600,
800
M6 x 12 only with enclosure width 1000,
1200
For
enclosure
width
mm
600
800
1000
1200
Length
mm
Model No. CM
499
699
899
1099
5001.080
5001.081
5001.082
5001.083
Accessories:
Cable clamps for C rails
For
cable diameter Packs of Model No. DK
mm
6 – 14
25
7077.000
12 – 18
25
7078.000
18 – 22
25
7097.000
22 – 26
25
7097.220
26 – 30
25
7097.260
30 – 34
25
7097.300
34 – 38
25
7097.340
38 – 42
25
7098.000
42 – 56
25
7098.100
56 – 64
25
7099.000
Rittal Small Enclosures
Compact system enclosures Rittal CM
Accessories
Folding lever handle
Because the handle does not take up any
swing space, due to its folding mechanism,
the door surface area may be maximised for
installed equipment.
Colour:
Enclosure: Sim. to RAL 9005
Handle: Sim. to RAL 9006
Prepared for the installation of:
● Semi-cylinders with an overall length of 40
or 45 mm (to DIN 18 254)
● All lock inserts
● As well as SZ lock and push-button inserts
Standard version
For padlock
Packs of Model No. CM
1
5001.060
1
5001.062
Accessories:
Lock inserts,
see page 47.
SZ lock and push-button inserts,
see page 46.
Prepared for the installation of:
Packs of Model No. CM
KESO
1
5001.063
ASSA
1
5001.064
With security lock insert E1.
Only for applications in VW, Audi, SEAT,
SkodaAuto.
Supplied without key.
Other locks available on request.
Lock inserts
For folding lever handle CM 5001.060 and
standard CM lock (in exchange for the
standard double-bit lock insert).
Hinges, 180°
For retrospective conversion of standard
doors with 130° hinges. One pack is
sufficient for one door – i.e. with two-door
enclosures, two packs will be required.
Lock E1
Design
7 mm square
8 mm square
6.5 mm triangular
7 mm triangular
8 mm triangular
Screwdriver
Daimler
3 mm double-bit
Fiat
Packs of
3
Packs of Model No. CM
1
5001.061
Model No. TS
8611.100
8611.110
8611.220
8611.120
8611.130
8611.140
8611.150
8611.160
8611.170
Model No. CM
5001.000
Supply includes:
Assembly parts.
Rittal Small Enclosures
37
Compact system enclosures Rittal CM
Accessories
Rails for interior installation
For mounting on the threaded bolts provided
on the enclosure.
With TS system punchings on three sides.
Material:
Sheet steel, zinc plated, passivated
Supply includes:
Assembly parts.
For enclosure height/ Packs Model No.
width mm
of
SZ
600
4
5001.050
800
4
5001.051
1000
4
5001.052
1200
4
5001.053
1400
4
5001.054
Installation accessories
1
2
3
20
Model No.
For depth mm
TS punched section with mounting flange,
17 x 73 mm for the outer level
TS support strip for the outer level
TS punched rail 18 x 38 mm
PS punched rail 23 x 23 mm
with mounting bracket TS
300
400
8612.130
8612.140
–
–
4694.000
8612.240
–
600
4
5
7
TS punched section with mounting flange,
17 x 73 mm for the inner level
TS support strip for the inner level
PS punched section without mounting
flange 23 x 73 mm, with support bracket
TS (alternatively with one or two punched
rails 23 x 23 mm)
1200
8612.060 8612.080 8612.000 8612.020
8800.130 4579.000
–
–
4376.000 4377.000 4382.000 4378.000
Partial mounting plates
for universal interior installation,
see Cat. 31, page 913.
Installation:
static via TS punched sections with
mounting flanges mounted in the depth 1,
horizontally hinged via PS punched sections
without mounting flanges mounted in the
depth 7 and hinge attachment for partial
mounting plates, see Cat. 31, page 914.
1
4
2
1
4169.000
For width (mm)
800
1000
Swing frame, small
for 600 and 800 mm wide enclosures,
see Cat. 31, page 993.
Installation:
via PS punched sections without mounting
flanges mounted in the depth 7.
5
4
4
1
5
7
7
2
3
20
38
Rittal Small Enclosures
CS Outdoor
CS wall-mounted enclosures
B3
B1
T1
H3
B2
1
Material:
Aluminium AlMg3
Enclosure:
Exterior: 2.0 mm
Interior: 1.5 mm / 2.0 mm
Doors: 2.0 mm
Mounting plate/rotating
frame:
2.0 mm clear chromated
Colour:
RAL 7035
Protection category:
IP 55 to EN 60 529/10.91
Width (B1) in mm
H1
H2
T2
2
Supply includes:
Inner enclosure with door,
aluminium mounting plate
or rotating frame,
security lock
(CS 9791.045 and
CS 9791.145 with 2 security
locks),
foamed-in door seals,
gland plate at bottom,
mounting bracket for
thermostat,
outer enclosure with integral
vent louvres,
designer cover with security
lock, C rails on the rear
panel.
Packs
of
370/300
Height (H1) in mm
522.5/400
Depth (T1) in mm
210/170
Clearance width (B2) in mm
280
Clearance height (H2) in mm
380
Clearance depth (T2) in mm
145
Mounting plate width (B3) in mm
270
Mounting plate height (H3) in mm
380
Model No. CS
1
9791.015
1) With 5 U rotating frame instead of mounting plate.
2) Max. installation depth in the 482.6 mm (19˝) level.
Protection rights for wallmounted enclosure with
mounting plate:
German utility model
no. 297 16 467
German registered design
no. 97 08 625
UK registered design
no. 2 072 965
IR reg. design
no. DM/044 110
with validity for ES, FR, IT,
Indonesia
US patent no. 6,024,236
European patent
no. 0 902 514
with validity for FI, GB, SE
Japan. patent no. 3 189 210
1
2
Wall-mounted enclosure
with mounting plate
482.6 mm (19˝) rotating
frame
Rittal service:
Complete customised
interior installation
of the wall-mounted
enclosure up to integration
level 4 to the customer's
specifications is available.
Detailed drawing,
can be found on the Internet.
420/350
530/460
630/580
630/580
560.5/440
210/170
330
420
145
320
410
9791.025
700/565
265/220
440
545
195
430
535
9791.035
780/580
380/333
560
560
308
550
550
9791.045
780/580
380/333
560
560
2402)
–
–
9791.1451)
Wall mounting
Pole clamp
For mounting on a wall or
panel.
Material:
Stainless steel 1.4301
(AISI 304)
Supply includes:
4 clamping sections,
2 clamping straps,
4 clamping brackets.
Packs of
4
Model No. CS
9765.120
Packs of
1 set
Model No. CS
9765.125
General accessories from page 40
Rittal Small Enclosures
39
Accessories
Base/doors/locks
from page
Base/plinth, complete . . . . . . . . . . . . . . . .
Base/plinth components, front and rear . .
Base/plinth trim, side . . . . . . . . . . . . . . . . .
Interior door . . . . . . . . . . . . . . . . . . . . . . . .
Acrylic glazed cover . . . . . . . . . . . . . . . . .
System windows . . . . . . . . . . . . . . . . . . . .
Viewing window . . . . . . . . . . . . . . . . . . . . .
Operating panel . . . . . . . . . . . . . . . . . . . . .
The Ergoform S lock system . . . . . . . . . . .
Ergoform standard . . . . . . . . . . . . . . . . . . .
Lock and push-button inserts . . . . . . . . . .
41
42
42
43
43
44
45
45
46
46
46
Roof/wall mounting
41
Plastic handles . . . . . . . . . . . . . . . . . . . . . .
T handles . . . . . . . . . . . . . . . . . . . . . . . . . .
Lock inserts . . . . . . . . . . . . . . . . . . . . . . . .
Cylinder inserts . . . . . . . . . . . . . . . . . . . . .
Semi-cylinder lock . . . . . . . . . . . . . . . . . . .
Enclosure keys . . . . . . . . . . . . . . . . . . . . . .
Universal enclosure key . . . . . . . . . . . . . . .
Plastic wiring plan pocket . . . . . . . . . . . . .
180° hinges . . . . . . . . . . . . . . . . . . . . . . . .
Hinge pin remover . . . . . . . . . . . . . . . . . . .
47
47
47
48
48
48
48
49
49
50
from page
50
from page
52
Eyebolts . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Wall mounting bracket . . . . . . . . . . . . 50 – 51
Wall angle . . . . . . . . . . . . . . . . . . . . . . . . . 51
Wall bracket . . . . . . . . . . . . . . . . . . . . . . . . 51
Pole clamp . . . . . . . . . . . . . . . . . . . . . . . . . 51
Interior installation
52
53
53
53
53
54
54
54
55
55
55
Captive nuts M5/M6 . . . . . . . . . . . . . . . . . .
System lights . . . . . . . . . . . . . . . . . . . . . . .
Standard light. . . . . . . . . . . . . . . . . . . . . . .
Courtesy light . . . . . . . . . . . . . . . . . . . . . . .
Universal light. . . . . . . . . . . . . . . . . . . . . . .
System light with filament tube
(Linestra) . . . . . . . . . . . . . . . . . . . . . . . . . .
Connection accessories. . . . . . . . . . . . . . .
Earth straps . . . . . . . . . . . . . . . . . . . . . . . .
Earthing strap. . . . . . . . . . . . . . . . . . . . . . .
Contact washers . . . . . . . . . . . . . . . . . . . .
Cable entry plates . . . . . . . . . . . . . . . . . . . 59
Cable entry grommets . . . . . . . . . . . . . . . . 60
Connector grommets . . . . . . . . . . . . . . . . . 60
Foam rubber cable clamp strip . . . . . . . . . 60
Section for cable entry . . . . . . . . . . . . . . . . 60
Section for cable entry, rear. . . . . . . . . . . . 61
Plastic cable gland plates . . . . . . . . . 61 – 62
Plastic gland plates . . . . . . . . . . . . . . . . . . 62
Metal gland plates . . . . . . . . . . . . . . . 63 – 64
Module plates . . . . . . . . . . . . . . . . . . . . . . 64
Cable gland, brass . . . . . . . . . . . . . . . . . . 65
Cable gland, polyamide. . . . . . . . . . . . . . .
Multi-seal inserts . . . . . . . . . . . . . . . . . . . .
Stoppers. . . . . . . . . . . . . . . . . . . . . . . . . . .
Double-membrane gland . . . . . . . . . . . . . .
Stepped collar . . . . . . . . . . . . . . . . . . . . . .
Connector gland . . . . . . . . . . . . . . . . . . . .
Cable conduit and cable conduit holder . .
Cable fastening . . . . . . . . . . . . . . . . . . . . .
Cable ties . . . . . . . . . . . . . . . . . . . . . . . . . .
Metal cable ties . . . . . . . . . . . . . . . . . . . . .
Mounting plates . . . . . . . . . . . . . . . . . . . . .
Mounting bracket . . . . . . . . . . . . . . . . . . . .
Support rails TS 35/7.5 and TS 35/15 . . . .
Support rails. . . . . . . . . . . . . . . . . . . . . . . .
Mounting clip . . . . . . . . . . . . . . . . . . . . . . .
Mounting plates . . . . . . . . . . . . . . . . . . . . .
Rail mounting bracket . . . . . . . . . . . . . . . .
Universal bracket . . . . . . . . . . . . . . . . . . . .
Mounting block . . . . . . . . . . . . . . . . . . . . .
Threaded inserts M6 . . . . . . . . . . . . . . . . .
Self-tapping screws . . . . . . . . . . . . . . . . . .
Cable management
from page
Miscellaneous
from page
55
56
56
56
57
57
58
59
59
59
59
65
66
66
66
66
67
67
67
68
68
68
Compact swing frame . . . . . . . . . . . . . . . . 68
Utility shelf . . . . . . . . . . . . . . . . . . . . . . . . . 69
Interface flap . . . . . . . . . . . . . . . . . . . . . . . 69
40
Rittal Small Enclosures
Accessories
Base/plinth
Base/plinth, complete
Supply includes:
Assembly parts including 4 screws and
captive nuts M12 for mounting on the
enclosure.
100 mm high:
4 corner pieces, 2 trim panels front/rear
2 trim panels, side.
200 mm high:
4 corner pieces,
1 trim panel front/rear x 200 mm,
2 trim panels front/rear x 100 mm,
4 trim panels, side.
Sheet steel
for AE, AK, AP, AP universal console,
ES, PC-ES
Consisting of:
Trim panels at the front and rear with fitted
corner pieces and side trim panels.
Material:
Sheet steel, spray finished
Colour:
RAL 7022
Base/plinth for AE, AK, AP
For enclosures / consoles
Width (B) mm
Depth mm
600
600
800
800
800
1000
1000
1200
1200
1600
1600
300
400
300
400
500
300
400
400
500
400
500
Base/plinth
depth (T)
mm
279
370
279
370
440
279
370
370
440
370
440
Model No. SO
100 mm high
200 mm high
2816.200
2911.200
2818.200
2901.200
2841.200
2801.200
2891.200
2921.200
2851.200
2961.200
2863.200
2826.200
2912.200
2828.200
2902.200
2842.200
2802.200
2892.200
2922.200
2852.200
2962.200
2864.200
Accessories:
Fastening bolts for base/plinth trim,
see Catalogue 31, page 838.
Base assembly plate,
see Catalogue 31, page 838.
125
100
50
98
52.5
30
52.5
□ 14
22.5
25
T
18 x 14
Ø 8.5
100
Plinth, 100 mm high
30
37.5
12.5
125
100
62.5
200
2
62.5
32.5
32.5
98
37.5
12.5
98
25
Plinth, 200 mm high
B
Rittal Small Enclosures
41
Accessories
Base/plinth
Base/plinth components
front and rear
Sheet steel
for TS, CM, PC-TS, IW, FR(i), TE
Base/plinth component consisting of one
trim panel and two pre-configured corner
pieces. In 200 mm high base/plinth
components, one trim panel is divided into
two for cable entry.
Material:
Sheet steel, spray finished in RAL 7022
Cover caps: Plastic RAL 9005
Supply includes:
1 set =
2 base/plinth components, 4 cover caps,
4 screws and captive nuts M12
for mounting on the enclosure.
Base/plinth trim, side
Sheet steel
for TS, CM, PC-TS, IW, FR(i), TE
For mounting between the base/plinth
components. At 200 mm height, two 100 mm
base/plinth trims may be used.
Material:
Sheet steel, spray finished in RAL 7022
Supply includes:
1 set =
2 base/plinth trim panels, including parts for
attaching to the base/plinth components.
42
Model No. TS
For enclosure
width mm
100 mm high 200 mm high
600
8601.600
8602.600
800
8601.800
8602.800
1000
8601.000
8602.000
1200
8601.200
8602.200
Accessories:
Base assembly plate SO 2817.000,
see Catalogue 31, page 838.
German patent no. 198 60 408
Model No. TS
For enclosure
depth mm 100 mm high 200 mm high
300
8601.030
8602.030
400
8601.040
8602.040
Accessories:
Fastening bolts for base/plinth trim,
see Catalogue 31, page 838.
Rittal Small Enclosures
Accessories
Doors
For
AE enclosure
1101.010
1101.020
1101.030
1101.040
W (B)
mm
160
330
330
580
H
mm
260
330
580
580
Model No.
AE
1101.910
1101.920
1101.930
1101.940
23
30
30
70
23
with mounting frame
for compact enclosure AE IP 69K
For the installation of control and display
components. Mounting frame, depthadjustable for a distance between the outer
surface and the inside of the outer door of
35 to 85 mm (80 mm with AE 1101.010).
Material:
Sheet steel, 1.5 mm
Colour:
RAL 7035
Supply includes:
Mounting frame, door with cam lock and
screwdriver insert,
including assembly parts.
H
Interior door
B
Acrylic glazed cover
With security lock,
lock no. 3524 E.
Material:
Frame:
Extruded aluminium sections with
die-cast corner pieces
Glass panel: Smoked acrylic
Protection category:
IP 54 to EN 60 529/10.91
Acrylic glazed covers, 482.6 mm (19˝)
U
3
3
6
9
Width
mm
320
534
534
534
Height Depth
mm
mm
158
47.5
158
47.5
291.5
47.5
425
47.5
Model No.
FT
2780.000
2781.000
2782.000
2796.000
Max. installation depth: 43 mm
Visible area:
(width – 40 mm) x (height – 20.5 mm)
Metric acrylic glazed covers
Width
mm
400
400
500
500
600
600
Height
mm
200
400
200
400
200
400
Depth
mm
47.5
47.5
47.5
47.5
47.5
47.5
Model No.
FT
2784.000
2785.000
2786.000
2787.000
2788.000
2789.000
Max. installation depth: 43 mm
Visible area:
(width – 40 mm) x (height – 20.5 mm)
Rittal Small Enclosures
43
Accessories
Windows
System windows
To conceal display and operating
instruments or cut-outs, and to protect
against dirt and liquids as well as
unauthorised access.
Consisting of the following components:
33
Profile height 30
1. Base frame:
● Easily screw-fastened to the door thanks
to modified dimensions (tubular door
frame may be used as a drilling template).
● Readily height-adjustable.
● Stabilises the door cut-out.
● Conceals the cut edge.
● The rain canopy
− prevents dirt from landing on the seal,
− protects the glass from being lifted out,
− prevents the ingress of dirt and moisture
when opening the window.
Material:
System windows:
Extruded aluminium sections with die-cast
zinc corner pieces and single-pane safety
glass.
Surface finish:
Base frame:
Powder coated in RAL 7035.
Hinge and lock section:
Natural anodised.
Protection category:
IP 54 to EN 60 529/10.91.
63
Profile height 60
2. Viewing window:
● Made from single-pane safety glass:
− high level of resistance to solvents and
scratches,
− anti-static,
− reduced risk of injury if broken.
● Integral cam lock with double-bit insert,
easily exchanged for all standard lock
inserts and semi-cylinders in the
Ergoform-S lock system
(not with FT 2735.500 and .560).
● Hinge with 180° opening angle, easily
inserted.
To fit
TS, ES, IW
with width
mm
600
800
Window size (mm)
external
internal
W
H
270
370
470
500
570
670
270
370
470
700
570
670
Other sizes1)
w
430
630
h
200
300
400
500
600
200
300
400
500
600
Model No. FT
30 section
2735.500
2735.510
2735.520
2735.530
2735.540
2735.560
2735.570
2735.580
2735.590
2735.250
2735.509
Model No. FT
60 section
–
2736.510
2736.520
2736.530
2736.540
–
–
2736.580
2736.590
2736.500
2736.509
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
see page 47 and Ergoform-S lock system (except H = 270 mm), see page 46.
1) Please also specify the external dimensions of the viewing window.
Delivery times available on request.
Example:
System window (30 profile) to fit door width 500 mm
with width W = 400 mm x height H = 480 mm (w x h = 330 mm x 410 mm)
Model No. FT 2735.509/W x H = 400 x 480 mm.
44
Rittal Small Enclosures
Accessories
Windows/operating panels
Viewing window
Protection category:
IP 54 to EN 60 529/10.91
Supply includes:
Plastic handle with lock
insert no. 3524 E.
For mounting on
● AE instead of door
● Surfaces
Material:
Frame: Aluminium, natural anodised.
Glass panel: Acrylic
For use
as door variant with AE
Model No. FT
Depth = 34 mm
Depth = 60 mm
377
2730.000
2760.000
497
2733.000
2763.000
597
2731.000
2761.000
757
2732.000
2762.000
–
197
2734.000
Visible area: (width – 60 mm) x (height – 60 mm)
Width
mm
1039.500, 1339.500, 1009.500
599
1050.500, 1350.500, 1007.500
499
1010.500, 1060.500, 1360.500
599
1012.500, 1076.500, 1376.500
599
for 3 U subrack
599
Max. installation depth: (depth – 4 mm)
Height
mm
Note:
Other modules available on request.
Operating panel
For mounting on:
● AE instead of door
● Surfaces
Frame construction with corner connectors
on the inside, 3 mm aluminium plate
secured from the inside and sealed against
the frame.
Material:
Aluminium, natural anodised.
Protection category:
IP 54 to EN 60 529/10.91
For use as door variant
Width
for AE
mm
1002.500, 1032.500, 1035.500
199
1004.500, 1030.500, 1031.500
379
1006.500, 1380.500
379
1008.500, 1038.500, 1338.500
379
1007.500, 1013.500, 1050.500,
499
1350.500
1009.500, 1039.500, 1339.500
599
1010.500, 1060.500, 1360.500
599
1) With AE, only for use on the rear panel
Supply includes:
Aluminium frame, display panel,
hinges, brackets.
German patent no. 28 47,994
European patent no. 10,763
with validity for AT, BE, CH, FR, GB,
NL, SE
Accessories:
Cam lock FT 2749.000,
see Catalogue 31, page 880.
Height
mm
297
297
377
597
Depth
mm
34
34
34
34
497
34
2745.000
377
597
34
34
2744.000
2746.000
Model No. FT
2740.0001)
2741.000
2742.000
2743.000
Area available for population: (width – 70 mm) x (height – 70 mm)
Dimensions of aluminium plate: (width – 54 mm) x (height – 54 mm)
Note:
Other modules available on request.
Rittal Small Enclosures
45
Accessories
Locks
The Ergoform S
lock system
The unlocked handle folds down forwards
and is swivelled to open the lock.
Material:
Die-cast zinc
Surface finish:
Powder coated
Ergoform standard
Prepared for the installation of semicylinders with a total length of 40 or 45 mm
(to DIN 18 254) and all 27 mm lock inserts,
version A, see page 47.
To fit KS plastic enclosures. Prepared for
the installation of semi-cylinders with a total
length of 40 mm (to DIN 18 254), all 27 mm
lock inserts, version A, and lock and pushbutton inserts, see page 46/47.
Lock and push-button inserts
For installation in
● comfort handle for semi-cylinder,
see Cat. 31, page 882
● Ergoform-S standard
see page 46
● CM folding lever handle,
see page 37
46
Design
RAL 7032
With brown handle
Brown
Matt nickel-plated
RAL 7032
RAL 7035
RAL 70321)
With brown handle and
bracket
1) Hole diameter = 7 mm
for padlock
Design
RAL 7032
With brown handle
Design
Lock insert
Lock no. 3524 E
Push-button insert
Lock and
push-button insert,
lock no. 2123;
No other lock is
possible
1) with 2 keys
Model No. SZ
2450.000
2451.000
2452.000
2454.000
2435.000
2455.000
Model No. KS
1490.000
Model No. SZ
2467.0001)
2468.000
2469.0001)
Rittal Small Enclosures
Accessories
Locks
Plastic handles
with cylinder insert.
Lock no. 3524 E including assembly parts,
seal and 2 keys.
Note:
The universal lock systems allows the
installation of a suitable handle to suit almost
any application or customer specification.
The relevant product ordering page shows
which handles can be fitted into each
particular assembly.
Version B
1
1
Colour
RAL 9011
RAL 7030
Model No. SZ
2576.000
2439.000
Version B,
but without cylinder insert.
2
Colour
RAL 9011
Model No. SZ
2533.000
2
T handles
Version B
Material:
Die-cast zinc, chrome-plated
Design
With lock insert,
lock no. 3524 E
Without lock insert
Model No. SZ
2575.000
2572.000
Supply includes:
Seal and 2 keys.
Lock inserts
Version A
Material:
Die-cast zinc
Note:
The universal lock systems allows the
installation of a suitable lock to suit almost
any application or customer specification.
The relevant product ordering page shows
which locks can be fitted into each particular
assembly.
Rittal Small Enclosures
Length 27 mm
7 mm square
8 mm square
7 mm triangular
8 mm triangular
Screwdriver
Daimler insert
3 mm double-bit
Fiat
6.5 mm triangular
(CNOMO)
Model No. SZ
2460.000
2461.000
2462.000
2463.000
2464.000
2465.000
2466.000
2307.000
2460.650
47
Accessories
Locks
Cylinder inserts
Version B
Lock no. 3524 E with 2 keys.
Material:
Die-cast zinc
Semi-cylinder lock
for compact enclosures AE
For retro-fitting to single-door enclosures
with cam lock.
The cover plate is locked by semi-cylinders
with a total length of 40/45 mm (to
DIN 18 254). An additional cover protects
the cylinder against dirt. The protection
category of the enclosure is not impaired.
Supplied without semi-cylinder.
Material:
Die-cast zinc
Enclosure key
For lock inserts (one double-bit key is
supplied with every enclosure).
Universal enclosure key
Double-bit, 8 mm square, 8 mm triangular
(also for 7 mm inserts), with integral
screwdriver.
48
Packs of
1
Model No. SZ
2571.000
Design
RAL 7035
RAL 7032
Nickel-plated (matt)
Model No. SZ
2534.100
2534.000
2534.500
German patent no. 195 12 280
European patent no. 0778 913
with validity for GB, FR, IT
US patent no. 5,916,282
Jap. patent no. 3.088.465
Design
Double-bit key no. 5
Security key no. 3524 E
7 mm triangular
8 mm triangular
7 mm square
8 mm square
Daimler key
Fiat key
Packs of
1
Model No. SZ
2531.000
2532.000
2545.000
2546.000
2547.000
2548.000
2521.000
2308.000
Model No. SZ
2549.000
Rittal Small Enclosures
Accessories
Doors
Wiring plan pocket
made of plastic
for AE
For installation options, refer to table
● B = Screw-fastened to the perforated door
strip on both sides
● E = Screw-fastened on one side, other
side stuck with adhesive
or stuck entirely with adhesive
Supply includes:
2 holders with double-sided sticky tape,
acrylic glazed pane,
assembly parts.
Note:
The acrylic glazed pane may be shortened
to any required size for shorter doors.
Model No. SZ
2514.500
2514.600
2514.800
Usable width mm
340
415
615
Usable depth mm
18
18
18
Height of acrylic glazed pane mm
167
167
167
Installation options:
For Model No. AE
Width mm
1050.500
500
B
–
–
1057.500
500
B
–
–
1058.500
600
E
E
–
1060.500
600
E
E
–
1073.500
760
E
E
–
1076.500
600
E
E
–
1077.500
760
E
E
–
1090.500
600
E
E
–
1100.500
1000
B
–
–
1110.500
1000
B
–
–
–
–
1114.500
1000
B1)
1130.500
1000
B
–
–
1180.500
800
E
E
E
–
–
1213.500
1000
B1)
1260.500
600
E
B
–
1280.500
800
E
E
B
1350.500
500
B
–
–
1360.500
600
E
E
–
1376.500
600
E
E
–
1) Prepared for the installation in the l/h side door; for installation in the r/h side door, the
acrylic glazed pane can be shortened.
Hinges 180°
For retrospective conversion of standard
doors with 130° hinges.
Assembly parts.
For AE
Material:
Die-cast zinc
Rittal Small Enclosures
Packs of
2
Model No. SZ
2449.000
49
Accessories
Locks/roof/wall mounting
Hinge pin remover
For safe and easy removal of hinge pins.
Eyebolts
for AE, AK
For crane transportation of enclosures, with
reinforcement plate to be inserted
underneath.
Thread: M12
Supply includes:
Eyebolts, reinforcement plates.
Eyebolts
for CM
For crane transportation of enclosures, with
reinforcement plate to be inserted
underneath.
Thread: M12
Supply includes:
Eyebolts, reinforcement plates.
For enclosure
AP/AK
AE/FM
Model No. SM
2431.000
2432.000
Packs of
4
Model No. SZ
2509.000
Packs of
2
Model No. SZ
2509.500
Wall mounting bracket
For the attachment of KL, EB, BG and EL
enclosures as well as DK and FM wallmounted distributors.
Supply includes:
Assembly parts for mounting on the
enclosure.
Note:
For hygiene reasons, and in view of the
protection category, the stainless steel
enclosures do not have any drilled holes for
the wall mounting brackets.
Material
Brass
nickelplated
Sheet steel
zinc-plated,
passivated
Stainless
steel 1.4301
(AISI 304)
Wall mounting bracket
For the attachment of KL, EB, BG, AE, CM
and EL enclosures as well as DK and FM
wall-mounted distributors.
Supply includes:
Assembly parts for mounting on the
enclosure.
Note:
For hygiene reasons, and in view of the
protection category, the stainless steel
enclosures do not have any drilled holes for
the wall mounting brackets.
50
Material
Sheet steel
zinc-plated,
passivated
Wall
distance
mm
Packs Model No.
of
KL
8
4
1580.000
8
4
1590.000
8
4
1594.000
Wall
distance
mm
40
10
Packs Model No.
of
SZ
1
4
1
4
Stainless
steel 1.4301
10
4
(AISI 304)
1) Without assembly parts.
2503.0001)
2503.010
2508.0001)
2508.010
2433.000
Rittal Small Enclosures
Accessories
Wall mounting
Wall mounting bracket
for KS
For attachment to the wall, only possible
from the outside of the enclosure.
Material:
Fibreglass-reinforced polyamide1)
Supply includes:
Assembly parts for mounting on the
enclosure.
Wall angle
For compact enclosures (additional holes
required in the enclosure).
Packs
Model No.
of
KS/KE
Sim. to RAL 7032
4
1483.000
Sim. to RAL 9011
4
9266.0001)
1) With graphite additive for Ex applications.
Colour
Material
Sheet steel
Stainless steel
1.4301
(AISI 304)
Wall bracket
For wall attachment of TS and ES enclosures
at the roof, e. g. with heavy components on
the door.
Material:
Sheet steel, zinc-plated, passivated
Pole clamp
For reliable, convenient fastening to round or
square poles.
For pole diameter / size:
Ø from 40 to 190 mm
□ from 50 to 150 mm
For KL, EB, BG, AE, KS
Supply includes:
2 mounting angles, 600 mm long
4 clamping sections,
2 clamping straps,
4 clamping brackets,
4 screws and nuts M8
for mounting on the enclosure.
Rittal Small Enclosures
Packs of
4
Packs Model No.
of
SZ
RAL 7035
1
2505.500
RAL 7032
1
2505.200
Colour
–
1
2583.000
Model No. PS
4595.000
Material:
Mounting angles, clamping section:
Sheet steel, zinc-plated, passivated
Clamping strap: Stainless steel 1.4301
(AISI 304)
Packs of
1 set
Model No. SZ
2584.000
51
Accessories
Interior installation
Mounting plates
for KL
For component installation outside of the
enclosure. Assembly screws included as
accessories with the enclosure.
Material:
Sheet steel, 2 mm, zinc-plated, passivated
F2
Possible
alternative:
Support rails,
see page 53.
F2
6.6
8.2
14.5
42.5
12.5
For size
mm
150 x 150
200 x 150
300 x 150
1
G1
400 x 150
200 x 200
23.5
300 x 200
400 x 200
18.5
F1
1
Accessories:
Self-tapping screws SZ 2487.000,
see page 55.
Attachment in the centre
only for 125 mm wide
plates
500 x 200
600 x 200
800 x 200
300 x 300
400 x 300
500 x 300
600 x 300
400 x 400
600 x 400
800 x 400
For Model No. KL
1500.510, 1514.510, 1521.010
1528.510, 1529.510
1501.510, 1515.510, 1522.010,
1530.510
1589.510
1502.510, 1516.510, 1523.010
1503.510, 1517.510, 1524.010,
1531.510
1504.510, 1518.510, 1525.010,
1532.510
1505.510, 1533.510
1506.510, 1519.510, 1534.510
1527.510, 1542.510
1507.510, 1526.010, 1535.510
1508.510, 1536.510
1509.510, 1537.510
1510.510, 1538.510
1511.510, 1539.510
1512.510, 1540.510
1513.510, 1541.510
Mounting plate
for Premium KL
For installing at a distance from the rear
panel.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Spacer bolts
and assembly parts.
Dimensions in mm
G1
F1
F2
135
125
–
185
125
–
Model No.
KL
1560.700
1575.700
285
125
–
1561.700
385
185
125
175
–
50
1576.700
1562.700
285
175
50
1563.700
385
175
50
1564.700
485
585
785
285
385
485
585
385
585
785
175
175
175
275
275
275
275
375
375
375
50
50
50
50
50
50
50
62.5
62.5
62.5
1565.700
1566.700
1574.700
1567.700
1568.700
1569.700
1570.700
1571.700
1572.700
1573.700
For
W (B)
KL enclosures mm
1024.010
100
1024.020
1024.030
250
1024.040
350
H Packs Model No.
mm
of
KL
100
1
1024.910
150
250
1
1
1024.920
1024.930
Mounting plate
mounting
B
H
25
12.5
12.5
12.5
1
1
52
12.5
Spacer bolts
M5 x 15
Rittal Small Enclosures
Accessories
Interior installation
Mounting bracket
for Premium KL
For variable attachment of support rails on a
12.5 mm pitch pattern.
Material:
Stainless steel 1.4301 (AISI 304)
Supply includes:
Assembly parts.
For
L
KL enclosures
1024.010
85
1024.020
1024.030
135
1024.040
235
N
Packs Model No.
of
KL
6
2
1024.810
10
18
2
2
1024.820
1024.830
36.5
L
N x 12.5 = H3
1
1
Variable to
mounting
bracket
15
25
6
5.5
Support rails TS 35/7.5
and TS 35/15
to EN 50 022
for KL, AE
Length sized to the enclosure width.
For
enclosure
width
mm
150
200
300
400
500
600
Support rails
length
mm
137
187
287
387
487
587
Version
TS 35/7.5
TS 35/15
Support rails
to EN 50 022
Fixed length 2 m
Mounting clip
for support rails
For fast, secure attachment of:
● Cable ducts
● Mounting plates
● Mounting angles
on support rail TS 35/7.5 and TS 35/15 to
EN 50 022.
Simply pre-assemble the mounting clip on
the part to be installed, then snap into
position on the support rail.
Rittal Small Enclosures
Packs of
Model No.
SZ
10
10
10
10
10
10
2314.000
2315.000
2316.000
2317.000
2318.000
2319.000
Version
Length
TS 35/15
TS 35/7.5
2m
2m
Packs of
30
Packs
of
6
6
Model No.
SZ
2313.150
2313.750
Model No. SZ
2309.000
German patent no. 195 44 083
European patent no. 0 776 077
with validity for ES, FR, IT, SE
53
Accessories
Interior installation
Mounting plates
Packs of
4
Screw-fastened, small
Model No. PS
4532.000
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly screws.
Rail mounting bracket
for individual rail mounting.
Material:
Sheet steel, zinc-plated, passivated
Cable retainer Packs of Model No. SZ
Flat
20
2365.000
Inclined
20
2366.000
35
M5
47
35°
30
M6
Ø7
Ø7
60
73
81
Universal bracket
For installing
● Enclosure lights in
− Compact enclosures AE and AK
− Compact system enclosures Rittal CM
− Console systems AP
● Door-operated switches in
− Compact enclosures AE
− Console systems AP
● Cable conduit holder SZ 2593.000 and
SZ 2591.000 in
− Compact enclosures AE
− Console systems AP
● Support rails for terminals in
− Operating housings and command
panel housings with door.
Mounting screws are concealed when the
door is closed. Existing holes for mounting
blocks or hinges may be used with AE.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
54
Packs of
6
Model No. SZ
2373.000
28
Ø 4.2
8
60
45
Rittal Small Enclosures
Accessories
Interior installation
Mounting block
for AE
As an accessory for additional interior
installation, e.g. mounting of cable ties,
PS punched rails, top hat rails and C rails
(e.g. for a second pair of mounting angles).
Supply includes:
Assembly parts.
Threaded inserts M6
for KS
For securing installed equipment to the
moulded bosses in the door and in the
enclosure rear panel.
Screw length available for insertion: 8 mm.
Self-tapping screws
Mark, drill and tighten in a single operation
using electric or pneumatic tools.
For metal thickness: 0.8 – 3 mm
Length: 16 mm
Usable length: 9.5 mm
Width across flats: 8 mm
Captive nuts M5/M6
For the attachment of rack-mounted
electronic, equipment, 482,6 mm (19˝)
installed equipment and blanking plates to
the mounting angles, 482.6 mm (19˝).
For use with metal thickness from
0.8 – 2.0 mm. In areas of narrow tolerance,
captive nuts for metal thicknesses of
1.2 – 1.5 mm should be used. Optionally
with or without contact of the installed
equipment to the 482.6 mm (19˝) section/
enclosure.
Packs of
20
Model No. SZ
2574.000
Packs of
20
Model No. KS
1482.000
Dimensions
mm
ST 4.8 x 16
Model No. SZ
300
2487.000
Captive nut M5
Design
with
contact
without
contact
For metal
Packs Model No.
thicknesses
of
EL
mm
0.8 – 2.0
50
2094.500
0.8 – 2.0
50
2092.500
Captive nut M6
For metal
Packs Model No.
Design
thicknesses
of
EL
mm
with
0.8 – 2.0
50
2094.200
contact
without
0.8 – 2.0
50
2092.200
contact
with
1.2 – 1.5
50
2094.300
contact
without
contact
Rittal Small Enclosures
Packs of
1.2 – 1.5
50
2092.300
55
Accessories
Interior installation
System lights
Also required:
Connection accessories, see page 58.
For mounting in AE, AK and AP using
universal bracket SZ 2373.000.
Light:
Universal white
Accessories:
Adaptor bracket, see Catalogue 31,
page 931.
Universal bracket, see page 54.
Protection category:
IP 20 to EN 60 529/10.91
Components
Sockets and connectors for:
– Power supply
– Through-wiring
– Facility for connecting a door-operated switch
Jack for normally open contact
Motion sensor
Interference suppression via:
– Radio interference suppression capacitor
– Full-electronic ballast
Additional manual switching with rocker or slide switch
Light cover
Light cone adjustment
Individual voltage supply 110 – 240 V
Standard
light
Courtesy
light
Universal
light
System light
Standard light
Technical
Width
Height
Depth
Socket
specifications
mm
mm
mm
14 kW, 230 V, 50 Hz
Yes
452
117
50
18 kW, 230 V, 50 Hz
Yes
682
117
50
30 kW, 230 V, 50 Hz
Yes
987
117
50
With fluorescent lamp, socket G 13, length 375/604/908 mm
Model No.
SZ
4138.140
4138.180
4138.300
Approvals
ENEC
ENEC
ENEC
Courtesy light
Technical
Width
Height
Depth
Socket
specifications
mm
mm
mm
14 W, 100 – 240 V,
Yes
452
117
50
50/60 Hz
18 W, 100 – 240 V,
Yes
682
117
50
50/60 Hz
30 W, 100 – 240 V,
Yes
987
117
50
50/60 Hz
With fluorescent lamp, socket G 13, length 375/604/908 mm
56
Model No.
SZ
Approvals
4139.140
ENEC
4139.180
ENEC
4139.300
ENEC
Rittal Small Enclosures
Accessories
Interior installation
Universal light
Technical
specifications
Model No.
SZ
Yes
345
95
55
4155.100
26 W, 110 – 240 V,
No
345
95
55
4155.000
50 – 60 Hz
No
345
95
55
4155.500
With compact fluorescent lamp, TC-DEL 26 W, base G24q-3, length 174 mm
Socket
W mm
H mm
D mm
Approvals
VDE
VDE
UL
System light with
filament tube (Linestra)
Technical specifications
35 W, 230 V AC/DC
60 W, 230 V AC/DC
With filament tube.
1) base 35 S14s, length 300 mm
2) base 60 S14s, length 500 mm
Rittal Small Enclosures
Socket
W mm
H mm
D mm
No
No
380
580
59
59
41
41
Model No.
SZ
4103.3501)
4103.6002)
57
Accessories
Interior installation
Connection accessories
The following components can be used for
time-saving and simple installation of the
lights:
Connection cable
for
Length Packs
mm
of
Power supply
(with socket, without connector)
Power supply
(with jack and strain relief,
without connector)
Door-operated switch
with mounting accessories
With connection cable
Without connection cable
Accessories:
Cable ties for quick assembly,
see page 68.
Orange
3000
5
4315.100
4315.110
–
3000
1
–
–
4315.150
Length Packs
mm
of
600
1000
–
1
Model No. SZ
Orange
Yellow
4315.500
4315.510
4315.300
4315.310
4127.000
Connection component with circuit-breaker 10 A
Reduce assembly costs:
Power is supplied quickly and reliably to system lights via the
connection cable.
For independently configured cables, connector SZ 2507.200 must
be used.
Connection component to be snapped onto the top hat rail.
For self-assembly
Sockets for power supply
Connector for door operated switch cable
58
Model No. SZ
Yellow
Grey
Packs of
5
Packs of
Model No.
SZ
1
2507.500
Model No. SZ
2507.100
2507.400
Rittal Small Enclosures
Accessories
Interior installation/cable management
Earth straps
For configuring a reliable earthing
connection with perfect contact.
● With ring terminals in M6 and M8 to match
the earthing screw
● Length-optimised and ready to install
For
KL, EB,
AE 1032.XXX,
AE 1035.XXX
AE, AP
TS, ES, PC,
AP universal
console, KE
Door/lid
Enclosures
M6
M6
M6
M8
M8
M8
CrossConLength Packs Model No.
section
nection
mm
of
SZ
mm2
M8 – M8
4
170
5
2564.000
M8 – M8
16
170
5
2565.000
M8 – M8
25
170
5
2566.000
M6 – M6
10
200
5
2565.100
M8 – M8
4
300
5
2567.000
M6 – M8
10
300
5
2565.110
M8 – M8
10
300
5
2565.120
M8 – M8
16
300
5
2568.000
M8 – M8
25
300
5
2569.000
Earthing strap
Tin-plated copper, in various lengths and
cross-sections with press-fitted contact
rings. Earthing straps counteract the current
displacement effect at high frequencies,
whilst at the same time offering highly
flexible connection opportunities.
Contact washers
Toothed contact washers facilitate secure PE
conductor connection. As a result, there is
no need to manually strip paint in the
connection area.
Cable entry plates
For
● Cable entry grommets
● Connector grommets
instead of segments of the standard divided
gland plates.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts.
Rittal Small Enclosures
For
M6
M8
M8
M6
M8
M8
CrossLength Packs Model No.
section
mm
of
SZ
mm2
10
200
10
2412.210
16
200
10
2412.216
25
200
10
2412.225
10
300
10
2412.310
16
300
10
2412.316
25
300
10
2412.325
Size
M5
M6
M8
Packs of Model No. SZ
100
2343.000
100
2334.000
100
2335.000
Suitable for installation in TS, CM and
PC enclosures based on TS
Enclosure
width
mm
600
800
1000
1200
Cut-outs
per plate
5
8
4
6
Packs Model No.
of
TS
2
2
4
4
8800.060
8800.080
8800.100
8800.120
59
Accessories
Cable management
Cable entry grommets
In conjunction with the cable entry plate,
simple and fast sealing of cables inserted in
the base area of enclosures.
Material:
Body: Polypropylene
Cover: Thermoplastic elastomer
Protection category:
IP 55 subject to correct mounting.
Connector grommets
Suitable for cable diameters from 8 to
36 mm.
Material:
Outer cover: Polypropylene covered with
thermoplastic elastomer
Seal: Cellular rubber
Protection category:
IP 55 subject to correct mounting.
Foam rubber cable clamp strip
For sealing the cable entry between the
gland plates. Particularly suitable for
identical cable cross-sections.
Material:
Seal PU foam,
cross-section: 30 x 30 mm
Protection category:
IP 55 subject to correct mounting.
Section for cable entry
for TS, CM
For mounting on top of the gland plates
existing in the enclosure. The better
alternative to the foam rubber cable clamp
strip, thanks to:
● Easier mounting
● Full-surface support
● High level of sealing of cables inserted
into the enclosure.
Cables per
grommet
8
3
1
max. Ø
mm
13
21
47
Packs
of
25
25
25
Model No.
PS
4316.000
4317.000
4318.000
German patent no. 42 07 281
European patent no. 0560119
with validity for FR, GB, IT, NL
Japan. Patent no. 2533052
US patent no. 5,422,436
Packs of
10
Model No. PS
4311.000
German patent no. 44 05 328
Italian patent no. 127 3503
French patent no. 2 716 583
Packs of
3m
Model No. SZ
2573.000
For
enclosure width Packs of
mm
600
2
800
2
1000
4
1200
4
Model No. TS
8802.060
8802.080
8802.100
8802.120
Material:
Extruded aluminium section,
seal PU foam,
cross-section: 30 x 25 mm
Protection category:
IP 55 subject to correct mounting.
60
Rittal Small Enclosures
Accessories
Cable management
Section for cable entry, rear
for TS, CM
Unlike the section for cable entry, centre, the
rear section is mounted directly onto the
base opening. In this way, when installing
the mounting plate in the rearmost position
(TS) or with CM, the cable may be routed
directly on a cable clamping rail with no
large radii. In conjunction with the new cable
clamp rail, see page 36, optimum
adjustment between the cable entry and
mounting plate can be achieved.
Material:
Extruded aluminium section,
seal PU foam,
cross-section: 30 x 25 mm
Protection category:
IP 55 subject to correct mounting.
Plastic cable gland plates
With prepunched PG holes for cable glands.
Used for sealing standard gland plates.
Temperature range:
suitable for use from –40°C to +70°C.
Size
5
Packs
of
10
10
Model No.
SZ
2560.000
2561.000
5
2562.000
5
2563.000
Size 3
330
110
45
120
Pg 11
120
Pg 13.5
7
25
7.5
160
90
75
Pg 16
56
70
8802.065
8802.085
8802.105
8802.125
Material:
SZ 2560.000, SZ 2561.000 = PS
SZ 2562.000 = ABS
SZ 2563.000 = Polyamide, glass bead
reinforced
Colour:
RAL 7035
AE 1032.500, AE 1035.500
AE 1030.500, AE 1031.500, AE 1380.500, AE 1038.500
AE 1110.500, AE 1114.500, AE 1338.500, AE 1100.500,
AE 1045.500, AE 1057.500, AE 1050.500, AE 1130.500,
AE 1213.500, AE 1350.500, CS 9771.111, CS 9771.115,
CS 9751.145, CS 9751.165, CS 9774.200, CS 9774.210,
CS 9774.250, CS 9774.400, CS 9774.410, CS 9774.450
AE 1039.500, AE 1339.500, AE 1060.500, AE 1076.500,
AE 1077.500, AE 1180.500, AE 1058.500, AE 1090.500,
AE 1360.500, AE 1376.500, AE 1073.500, AE 1260.500,
AE 1280.500, EL 1919.200, EL 1920.200, EL 1926.200,
DK 7011.535, DK 7012.535, DK 7013.535, DK 7014.535,
DK 7644.000, DK 7641.000, DK 7643.000, DK 7645.000,
CS 9772.111, CS 9772.115
4
Model No. TS
Supply includes:
1 set =
1 section for base opening,
1 section for base plate,
each with bonded seal.
For
1
3
Size 1
For
enclosure width Packs of
mm
600
1 set
800
1 set
1000
2 sets
1200
2 sets
Pg 21
Pg 29
Pg 36
Size 4
Size 5
530
339
45
149
149
133
Rittal Small Enclosures
110
110
110
110
8
120
133
120
8
49.5
61
Accessories
Cable management
Plastic cable gland plates
for KL and small fibre-optic distributors
based on AE.
With prepunched PG holes for cable glands.
Used for sealing standard gland plates.
Temperature range:
suitable for use from –40°C to +70°C.
Material:
ABS
KL 1581.000
Colour:
220
RAL 7035
Size
PG
No.
2
13.5
13.5
16
21
12
6
2
2
Packs Model No.
of
KL
5
1581.000
5
1582.000
KL 1582.000
202
Ø5
76
90
72
PG
13.5
PG
13.5
PG
13.5
Plastic gland plates
with membranes
for AE, EL, DK, CS
Simply pierce the plastic with a sharp
object, and pull through the cable.
Size
AE 1030.500, AE 1031.500, AE 1038.500, AE 1380.500
AE 1045.500, AE 1050.500, AE 1057.500, AE 1100.500,
AE 1110.500, AE 1114.500, AE 1130.500, AE 1213.500,
AE 1338.500, AE 1350.500, CS 9771.111, CS 9771.115,
CS 9751.145, CS 9751.165, CS 9774.200, CS 9774.210,
CS 9774.250, CS 9774.400, CS 9774.410, CS 9774.450
AE 1039.500, AE 1058.500, AE 1060.500, AE 1073.500,
AE 1076.500, AE 1077.500, AE 1090.500, AE 1180.500,
AE 1260.500, AE 1280.500, AE 1339.500, AE 1360.500,
AE 1376.500, EL 1919.200, EL 1920.200, EL 1926.200,
DK 7011.535, DK 7012.535, DK 7013.535, DK 7014.535,
DK 7641.000, DK 7643.000, DK 7644.000, DK 7645.000,
CS 9772.111, CS 9772.115
4
5
Size 3
Size 4
Diameter
mm
339
330
49.5
120
120
120
Ø 7.2
133
90
75
Ø 7.2
7.5
8
Size 5
534
47
110
110
110
110
8
62
149
133
Ø 7.2
149
120
45
PG
13.5
PG
16
PG
16
PG
13.5
PG
21
PG
13.5
PG
13.5
Material:
Plastic to UL 94-V2
Colour:
Similar to RAL 7035
Protection category:
IP 65 with careful cable entry.
For
3
PG
21
5–9
6 – 11
7 – 12
10 – 15
15 – 21
15 – 24
15 – 25
16 – 25
19 – 34
23 – 30
26 – 35
26 – 54
50 – 110
Packs
of
1
Model No.
SZ
2561.500
1
2562.500
1
2563.500
Number
of cable entries for
Model No. SZ
2561.500 2562.500 2563.500
–
–
18
17
–
–
–
24
16
27
48
36
2
4
–
–
–
6
–
8
–
4
–
–
2
–
–
–
–
2
–
4
2
–
–
4
–
–
1
Rittal Small Enclosures
Accessories
Cable management
Metal gland plates
Pre-punched
for AE, EL, DK, CS
Simply knock out the holes for the cable
glands using a screwdriver.
Material:
Sheet steel
Colour:
RAL 7035
Protection category:
IP 66 when mounting in the usual position,
bottom.
Accessories:
Cable glands made from polyamide or
brass, see page 65.
Size
For
3
4
5
Size 2
1581.100
1
2561.100
1
2562.100
1
2563.100
330
45
7.5
7
76
90
9
101
120
315
7.5
Size 4
120
75
101
72
90
1
Size 3
221
9.5
Size 5
339
534
120
120
47
110
110
110
110
8
133
149
133
8
8
49.5
149
Model No.
SZ
KL 1530.510, KL 1531.510, KL 1532.510, KL 1533.510,
KL 1534.510, KL 1535.510, KL 1536.510, KL 1537.510,
KL 1538.510, KL 1539.510, KL 1540.510, KL 1541.510,
KL 1542.510
AE 1030.500, AE 1031.500, AE 1038.500, AE 1380.500
AE 1045.500, AE 1050.500, AE 1057.500, AE 1100.500,
AE 1110.500, AE 1114.500, AE 1130.500, AE 1213.500,
AE 1338.500, AE 1350.500, CS 9771.111, CS 9771.115,
CS 9751.145, CS 9751.165, CS 9774.200, CS 9774.210,
CS 9774.250, CS 9774.400, CS 9774.410, CS 9774.450
AE 1039.500, AE 1058.500, AE 1060.500, AE 1073.500,
AE 1076.500, AE 1077.500, AE 1090.500, AE 1180.500,
AE 1260.500, AE 1280.500, AE 1339.500, AE 1360.500,
AE 1376.500, EL 1919.200, EL 1920.200, EL 1926.200,
DK 7011.535, DK 7012.535, DK 7013.535, DK 7014.535,
DK 7641.000, DK 7643.000, DK 7644.000, DK 7645.000,
CS 9772.111, CS 9772.115
2
323
518
8
Diameter
1581.100
Rittal Small Enclosures
Packs
of
Number of cable entries for
Model No. SZ
2561.100
2562.100
2563.100
M12
–
–
–
1
M16
–
–
2
–
M20
12
9
5
12
M25
–
4
13
11
M32
–
2
2
8
M40
–
–
2
4
63
Accessories
Cable management
Metal gland plates
For
● KL terminal boxes, see page 13.
● CP pillar, see Catalogue 31, page 236.
● IW enclosures, see Catalogue 31,
page 240 – 255.
Material:
Sheet steel, spray finished
Colour:
RAL 7035
Cut-out
Without
1 x connector,
16-pole
1 x connector,
24-pole
3 x module plates
Packs Model No.
of
KL
6
1158.500
6
1158.560
6
1158.540
6
1158.530
Accessories:
Module plates for individual cable entry,
see page 64.
Module plates
for individual cable entry
Fig. Design
1
2
1
2
3
4
With connector
grommet for 2 cables
with connectors up to
d = 8.5 mm
3
Perforated for
metric cable gland
4
Solid
5
For direct,
IP-protected
insertion of sensor/
actuator cables
6
Packs Model No.
of
BG
Material
M25
M32
2 + 21)
82)
Module plate:
Sheet steel,
zinc-plated, passivated
Connector gland:
(For details, see SZ 2400.300,
see Cat. 31, page 975)
1
1158.900
Sheet steel, zinc-plated,
passivated
10
1158.910
1158.920
1158.930
Plastic module plate with
strain relief and flexible
sealing membrane, including
stoppers for any unused
openings
1
1158.940
1158.950
To fit Ø
cables from 6.8 to 8.8 mm and
2 cables from 7.8 to 10.7 mm
2) 8 cables from 3.8 to 6.3 mm
1) 2
5
64
6
Rittal Small Enclosures
Accessories
Cable management
Cable gland, brass
1
2
3
Benefits:
● Because the gland and lock nut are sold
together in a single pack, this saves
additional ordering and storage.
● Clamping membranes for even tightening
and strain relief which protects the cables.
● Insulation thanks to plastic insert.
● Optimum seal on the connection thread,
thanks to O-ring.
● The lock nut cuts automatically into the
spray-finish, thereby creating a conductive
connection.
1
2
3
4
4
5
5
Top-hat nut
Neoprene seal
Plastic insert
O-ring
Lock nut
Size
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
1
2
1
2
3
3
4
4
5
5
Top-hat nut
Neoprene seal
Trapezoid thread
Sealing lip
Lock nut
Packs Model No.
of
SZ
15
15
10
10
5
4
2
1
2411.800
2411.810
2411.820
2411.830
2411.840
2411.850
2411.860
2411.870
Material:
Nickel-plated brass, neoprene seal
Protection category:
IP 68 (5 bar, 30 min.) to EN 60 529/10.91
Approval:
VDE tested to EN 50 262
Cable gland, polyamide
Benefits:
● Because the gland and lock nut are sold
together in a single pack, this saves
additional ordering and storage.
● Clamping membranes for even tightening
and strain relief which protects the cables.
● Spray-moulded sealing lip ensures an
optimum seal against the enclosure.
● Trapezoid thread for secure screwfastening of the top-hat nut.
Cable
diameter
mm
3 – 6.5
4.5 – 10
6 – 12
11 – 17
15 – 21
19 – 28
27 – 38
34 – 44
Size
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
Cable
diameter
mm
3 – 6.5
4.5 – 10
6 – 12
11 – 17
15 – 21
19 – 28
27 – 38
34 – 44
Packs Model No.
of
SZ
50
50
50
25
15
5
5
3
2411.600
2411.610
2411.620
2411.630
2411.640
2411.650
2411.660
2411.670
Material:
Polyamide 6, neoprene seal
Colour:
RAL 7035
Protection category:
IP 68 (5 bar, 30 min.) to EN 60 529/10.91
Approval:
VDE tested to EN 50 262
Rittal Small Enclosures
65
Accessories
Cable management
Multi-seal inserts
For the secure entry of several individual
cables into a single cable gland.
Size
M20
M25
M32
Cable diameter
mm
3
4
5
6
3
4
5
6
3
4
5
6
Number of
cables
4
3
3
2
7
6
4
3
9
9
6
6
Stoppers
For the reliable sealing of unused cable
entries.
Simply insert into the multi-seal inserts
instead of a cable, and clamp via the cable
gland.
Length 14 mm.
Material:
Polyamide 6
Double-membrane gland
For wall thicknesses from 1.5 to 4.5 mm
A high protection category can be achieved
with cable entry, thanks to the double seal.
Material:
Plastic to UL 94-HB
Protection category:
IP 66 with careful cable entry.
Stepped collar
For wall thicknesses from 1.5 to 4.5 mm
For cable entry, simply cut off at the required
level to match the cable diameter.
Material:
Plastic to UL 94-HB
Protection category:
IP 54 with careful cable entry.
66
Material:
Neoprene
Packs of
Model No. SZ
25
25
25
25
25
25
25
25
25
25
25
25
2411.500
2411.501
2411.502
2411.503
2411.504
2411.505
2411.506
2411.507
2411.508
2411.509
2411.510
2411.511
Diameter
mm
3
4
5
6
For
hole
M16
M20
M25
M32
For
hole
M20
M25
M32
M40
Packs of
Model No. SZ
25
25
25
25
2411.520
2411.521
2411.522
2411.523
Sealing
range
mm
5–9
7 – 12
9 – 16
14 – 21
Packs
of
Model No.
SZ
50
50
50
25
2898.160
2898.200
2898.250
2898.320
Sealing
Packs
range
of
mm
5 – 16
100
5 – 21
50
13 – 26.5
25
13 – 34
20
Model No.
SZ
2899.200
2899.250
2899.320
2899.400
Rittal Small Enclosures
Accessories
Cable management
Connector gland
for connector cut-outs (24-pole)
For the entry of 2 pre-assembled cables in
the connector cut-out, without dismantling
the connector.
For cable diameter from 8 – 36 mm.
Material:
Plastic
Clamp terminals: Sheet steel, zinc-plated,
passivated
Supply includes:
1 set =
2 half-shells, including seals,
with fastening clamp.
Cable conduit and cable
conduit holder
For secure cable routing e.g. from the
enclosure or mounting plate to the door.
Option of attaching the cable conduit holder
tailored to system punchings TS and to
482.6 mm (19˝) pitch pattern with no drilling
required.
Attachment facility for standard
commercially available cable ties is
provided on the cable conduit holder, so that
cables may be attached upon entry to/exit
from the cable conduit.
Material:
Cable conduit: Polythene
Cable conduit holder: polyamide
Cable conduit holder:
German patent no. 37 60 110
European patent no. 0 257 367
with validity for DE, ES, FR, GB, IT
US patent no. 4,779,828
Cable fastening
For professional, secure fastening of cables
and conduits.
For fastening:
● Slide into the mounting rail 23 x 23 mm,
● screw-fasten onto the round punchings of
the enclosures, as well as all punched
rails and punched sections.
As the fastening attachments are bayable,
several fastening attachments, even those of
different sizes, can be assembled using just
2 screws.
Material:
Polyamide
Packs of
1 set
Model No. SZ
2400.000
Cable conduit
Packs
of
25 m
25 m
25 m
25 m
Internal Ø mm
16
29
36
48
Model No. SZ
2595.000
2589.000
2596.000
2590.000
Cable conduit holder
For cable conduit Packs
Model No. SZ
Ø mm
of
16
20
2593.0001)
29
20
2591.0001)
36
20
2594.000
48
20
2592.000
1) Installation in compact enclosures AE
with universal bracket SZ 2373.000,
see page 54.
For cable
diameter
from – to
mm
6–9
9 – 12
12 – 16
16 – 20
Packs of Model No. PS
50
50
50
50
4319.090
4319.120
4319.160
4319.200
Also required:
Posidrive raised countersunk screw
M5 x 12 mm, SZ 2488.000, for screwfastening to the round system punchings,
see Catalogue 31, page 937.
Accessories:
Punched rail 23 x 23 mm,
see Catalogue 31, page 925.
Rittal Small Enclosures
67
Accessories
Cable management/miscellaneous
Cable ties
Length
mm
150
The super-fast solution for fastening cables
to the enclosure profile or mounting system
parts. Simply clip into the round system
punchings.
Packs of Model No. SZ
100
2597.000
Metal cable ties
see Catalogue 31, page 958.
Compact swing frame
for AE, AP
For the installation of electronic equipment,
482.6 mm (19˝) across the entire height.
Technical specifications:
Torsionally stiff frame, welded from
rectangular tube and triple-folded support
section.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Double-bit lock insert and assembly parts.
Accessories:
41 mm lock insert, type C,
see Catalogue 31, page 888.
T max.
D
68
For AE
For compact enclosure AE Height units
Enclosure
Model No. SR
Max.
Installation For enclosure height
mm
depth
Width Depth
(T max.) H1 (mm)
mm
mm
mm
H2 (mm)
Spray-finished
600
210
145
Stainless steel
600
350
265
Spray-finished
760
210
145
Spray-finished
Spray-finished
760
300
235
Stainless steel
6U
2026.200
11 U
2027.200
14 U
2034.200
380
600
760
320
270
1039.500
1009.500
1339.500
–
–
–
542
492
1060.500
1010.500
1360.500
–
–
–
676
626
1076.500
1012.500
1376.500
1077.500
1073.500
1014.500
Rittal Small Enclosures
Accessories
Other
Utility shelf
Width (B)
mm
220
450
Fastened with screws
With support mat for:
Measuring tools, writing equipment, mouse,
scanner, small parts etc.
For mounting on surfaces (doors, rear
panels) via rear assembly holes.
B
150/375
M6
Interface flap
Rittal Small Enclosures
150
35
52.5
21.5
20
1
Additional central thread
only for CP 6514.100
1
Packs of
1
Model No. SZ
2482.200
View without flap
70
View with flap
22.5
218
189
66
max. 146
66
6
81
11
max.
54
66
Standard double-bit lock insert may be
exchanged for lock inserts,
see page 47.
Material:
Cover: Cast aluminium, finely textured
Cover plate: Sheet steel 2 mm, zinc-plated,
passivated
Colour:
RAL 7035
Protection category:
IP 65 to EN 60 529/10.91
Supply includes:
Seal and assembly parts.
6514.110
6514.100
185
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts.
The compact alternative to the interface box.
For secure accommodation of all standard
sockets, computer ports, 3 1/2˝ or CD-ROM
drives.
The cast aluminium flap ensures a high
mechanical load-bearing capacity, and
guards against unauthorised access.
For:
● Any sufficiently large surface.
Model No. CP
15
1
1
Surface for interface cut-outs
69
List of model numbers
Model No. Page
1002.600
31
1004.600
31
1005.600
31
1006.600
31
1007.600
31
1008.600
31
1009.600
31
1010.600
31
1012.600
31
1013.600
31
1014.600
31
1016.600
31
1017.600
31
1018.600
31
1019.600
31
1024.010
16
1024.020
16
1024.030
16
1024.040
16
1024.810
53
1024.820
53
1024.830
53
1024.910
52
1024.920
52
1024.930
52
1030.500
27
1031.500
27
1032.500
27
1033.500
27
1034.500
27
1035.500
27
1038.500
28
1039.500
27
1045.500
28
1050.500
28
1050.900
25
1057.500
28
1058.500
28
1060.500
28
1073.500
28
1076.290
18
1076.500
28
1077.500
28
1090.500
28
1100.500
29
1101.010
30
1101.020
30
1101.030
30
1101.040
30
1101.910
43
1101.920
43
1101.930
43
1101.940
43
1110.500
29
1114.500
29
1130.500
29
1158.500
64
1158.530
64
70
Model No. Page
1158.540
64
1158.560
64
1158.900
64
1158.910
64
1158.920
64
1158.930
64
1158.940
64
1158.950
64
1180.500
28
1213.500
29
1260.500
29
1280.500
29
1338.500
28
1339.500
27
1350.500
28
1360.500
28
1376.500
28
1380.500
27
1400.600
33
1423.600
32
1432.600
32
1434.600
32
1444.600
32
1446.600
32
1448.600
32
1449.600
32
1453.600
32
1454.600
32
1466.600
33
1467.600
33
1468.600
33
1469.600
33
1479.600
33
1480.600
33
1482.000
55
1483.000
51
1490.000
46
1500.510
13
1501.510
13
1502.510
13
1503.510
13
1504.510
13
1505.510
13
1506.510
13
1507.510
13
1508.510
13
1509.510
13
1510.280
18
1510.510
13
1511.510
13
1512.510
13
1513.510
13
1514.510
13
1515.510
13
1516.510
13
1517.510
13
1518.510
13
1519.510
13
Model No. Page
1521.010
15
1522.010
15
1523.010
15
1524.010
15
1525.010
15
1526.010
15
1527.510
13
1528.510
13
1529.510
13
1530.510
14
1531.510
14
1532.510
14
1533.510
14
1534.510
14
1535.510
14
1536.510
14
1537.510
14
1538.510
14
1539.510
14
1540.510
14
1541.510
14
1542.510
14
1545.500
17
1546.500
17
1547.500
17
1548.500
17
1549.500
17
1550.500
17
1551.500
17
1552.500
17
1553.500
17
1554.500
17
1555.500
17
1556.500
17
1557.500
17
1558.010
26
1558.510
23
1559.010
26
1559.510
23
1560.700
52
1561.700
52
1562.700
52
1563.700
52
1564.700
52
1565.700
52
1566.700
52
1567.700
52
1568.700
52
1569.700
52
1570.700
52
1571.700
52
1572.700
52
1573.700
52
1574.700
52
1575.700
52
1576.700
52
1577.500 17, 24
1578.500 17, 24
Model No. Page
1579.500 17, 24
1580.000
50
1581.000
62
1581.100
63
1582.000
62
1583.010
26
1583.510
22
1583.520
22
1584.010
26
1584.510
22
1584.520
22
1585.010
26
1585.510
22
1585.520
22
1586.510
22
1586.520
22
1589.510
13
1590.000
50
1591.000
13
1592.000
13
1594.000
50
1605.510
23
1605.520
23
1606.510
23
1606.520
23
1609.510
25
1611.510
24
2026.200
68
2027.200
68
2034.200
68
2092.200
55
2092.300
55
2092.500
55
2094.200
55
2094.300
55
2094.500
55
2203.010
20
2203.020
20
2203.030
20
2203.110
21
2203.120
21
2203.160
21
2203.200
21
2203.210
21
2203.220
21
2203.230
21
2203.240
21
2203.250
21
2203.260
21
2203.270
21
2203.300
21
2203.310
21
2203.400
21
2203.500
19
2203.600
19
2207.010
20
2207.020
20
2207.030
20
Model No. Page
2307.000
47
2308.000
48
2309.000
53
2313.150
53
2313.750
53
2314.000
53
2315.000
53
2316.000
53
2317.000
53
2318.000
53
2319.000
53
2334.000
59
2335.000
59
2343.000
59
2365.000
54
2366.000
54
2373.000
54
2400.000
67
2411.500
66
2411.501
66
2411.502
66
2411.503
66
2411.504
66
2411.505
66
2411.506
66
2411.507
66
2411.508
66
2411.509
66
2411.510
66
2411.511
66
2411.520
66
2411.521
66
2411.522
66
2411.523
66
2411.600
65
2411.610
65
2411.620
65
2411.630
65
2411.640
65
2411.650
65
2411.660
65
2411.670
65
2411.800
65
2411.810
65
2411.820
65
2411.830
65
2411.840
65
2411.850
65
2411.860
65
2411.870
65
2412.210
59
2412.216
59
2412.225
59
2412.310
59
2412.316
59
2412.325
59
2431.000
50
2432.000
50
Model No. Page
2433.000
50
2435.000
46
2439.000
47
2449.000
49
2450.000
46
2451.000
46
2452.000
46
2454.000
46
2455.000
46
2460.000
47
2460.650
47
2461.000
47
2462.000
47
2463.000
47
2464.000
47
2465.000
47
2466.000
47
2467.000
46
2468.000
46
2469.000
46
2482.200
69
2487.000
55
2503.000
50
2503.010
50
2505.200
51
2505.500
51
2507.100
58
2507.400
58
2507.500
58
2508.000
50
2508.010
50
2509.000
50
2514.500
49
2514.600
49
2514.800
49
2521.000
48
2531.000
48
2532.000
48
2533.000
47
2534.000
48
2534.100
48
2534.500
48
2545.000
48
2546.000
48
2547.000
48
2548.000
48
2549.000
48
2560.000
61
2561.000
61
2561.100
63
2561.500
62
2562.000
61
2562.100
63
2562.500
62
2563.000
61
2563.100
63
2563.150
20
2563.500
62
Rittal Small Enclosures
List of model numbers
Model No. Page
2564.000
59
2565.000
59
2565.100
59
2565.110
59
2565.120
59
2566.000
59
2567.000
59
2568.000
59
2569.000
59
2571.000
48
2572.000
47
2573.000
60
2574.000
55
2575.000
47
2576.000
47
2583.000
51
2584.000
51
2589.000
67
2590.000
67
2591.000
67
2592.000
67
2593.000
67
2594.000
67
2595.000
67
2596.000
67
2597.000
68
2730.000
45
2731.000
45
2732.000
45
2733.000
45
2734.000
45
2735.250
44
2735.500
44
2735.509
44
2735.510
44
2735.520
44
2735.530
44
2735.540
44
2735.560
44
2735.570
44
2735.580
44
2735.590
44
2736.500
44
2736.509
44
2736.510
44
2736.520
44
2736.530
44
2736.540
44
2736.580
44
2736.590
44
2740.000
45
2741.000
45
2742.000
45
2743.000
45
2744.000
45
2745.000
45
2746.000
45
2760.000
45
Model No. Page
2761.000
45
2762.000
45
2763.000
45
2780.000
43
2781.000
43
2782.000
43
2784.000
43
2785.000
43
2786.000
43
2787.000
43
2788.000
43
2789.000
43
2796.000
43
2801.200
41
2802.200
41
2816.200
41
2818.200
41
2826.200
41
2828.200
41
2841.200
41
2842.200
41
2851.200
41
2852.200
41
2863.200
41
2864.200
41
2891.200
41
2892.200
41
2898.160
66
2898.200
66
2898.250
66
2898.320
66
2899.200
66
2899.250
66
2899.320
66
2899.400
66
2901.200
41
2902.200
41
2911.200
41
2912.200
41
2921.200
41
2922.200
41
2961.200
41
2962.200
41
4103.350
57
4103.600
57
4127.000
58
4138.140
56
4138.180
56
4138.300
56
4139.140
56
4139.180
56
4139.300
56
4155.000
57
4155.100
57
4155.500
57
4311.000
60
4315.100
58
4315.110
58
Rittal Small Enclosures
Model No. Page
4315.150
58
4315.300
58
4315.310
58
4315.500
58
4315.510
58
4316.000
60
4317.000
60
4318.000
60
4319.090
67
4319.120
67
4319.160
67
4319.200
67
4532.000
54
4595.000
51
5001.050
38
5001.051
38
5001.052
38
5001.053
38
5001.054
38
5001.060
37
5001.061
37
5001.062
37
5001.063
37
5001.064
37
5001.080
36
5001.081
36
5001.082
36
5001.083
36
5001.100
36
5001.110
36
5001.120
36
5001.130
36
5001.140
36
5001.150
36
5001.160
36
35
5001.210
35
5001.211
35
5001.212
35
5001.213
35
5001.214
35
5001.215
35
5001.216
35
5001.217
35
5001.218
35
5001.219
35
5001.220
35
5001.221
35
5001.222
35
5001.223
35
5001.224
35
5001.225
35
5001.226
35
5001.227
35
5001.228
35
5001.229
5110.500
34
5111.500
34
5112.500
34
Model No. Page
5113.500
34
5114.500
34
5115.500
34
5116.500
34
5117.500
34
5118.500
34
5119.500
34
5120.500
34
5121.500
34
5122.500
34
5123.500
34
6514.100
69
6514.110
69
7077.000
36
7078.000
36
7097.000
36
7097.220
36
7097.260
36
7097.300
36
7097.340
36
7098.000
36
7098.100
36
7099.000
36
8800.060
59
8800.080
59
8800.100
59
8800.120
59
8802.060
60
8802.065
61
8802.080
60
8802.085
61
8802.100
60
8802.105
61
8802.120
60
8802.125
61
9100.210
9
9101.210
9
9102.210
9
9103.210
9
9104.210
9
9105.150
10
9105.210
9
9105.700
10
9106.150
10
9106.210
9
9106.700
10
9107.150
10
9107.210
9
9107.700
10
9108.210
9
9108.350
10
9108.700
10
9110.210
9
9110.350
10
9110.700
10
9111.210
9
9111.350
10
9111.700
10
Model No. Page
9112.210
9
9112.350
10
9112.700
10
9113.210
9
9113.350
10
9113.700
10
9114.210
9
9114.700
10
9116.210
9
9116.350
10
9116.700
10
9117.210
9
9117.350
10
9117.700
10
9118.210
9
9118.350
10
9118.700
10
9119.210
9
9121.122
11
9121.160
11
9121.230
11
9122.424
11
9123.000
11
9123.100
11
9266.000
51
9500.000
4
9500.050
6
9501.000
4
9502.000
4
9503.000
4
9504.000
4
9504.100
4
9505.000
4
9506.000
4
9506.100
4
9507.000
4
9507.100
4
9508.000
4
9508.050
6
9508.100
4
9509.000
4
9509.100
4
9510.000
4
9510.100
4
9511.000
4
9511.100
4
9512.000
4
9512.100
4
9513.000
4
9513.100
4
9514.000
5
9514.050
6
9514.100
5
9515.000
5
9515.100
5
9516.000
5
9516.100
5
9517.000
5
Model No. Page
9517.100
5
9518.000
5
9518.100
5
9519.000
5
9519.100
5
9520.000
5
9520.100
5
9521.000
5
9521.050
6
9521.100
5
9522.000
5
9522.100
5
9523.000
5
9523.100
5
9524.000
5
9524.100
5
9530.000
4
9531.000
4
9540.000
7
9541.000
7
9542.000
7
9543.000
7
9544.000
7
9545.000
7
9546.000
7
9547.000
7
9548.000
7
9549.000
7
9550.000
7
9551.000
7
9552.000
7
9553.000
7
9560.000
8
9561.000
8
9562.000
8
9563.000
8
9564.000
8
9565.000
8
9566.000
8
9567.000
8
9568.000
8
9580.000
7
9581.000
7
9582.000
5
9583.000
8
9765.120
39
9765.125
39
9791.015
39
9791.025
39
9791.035
39
9791.045
39
9791.145
39
71
All in all – solutions from Rittal
Industrial enclosures
Small enclosures Z Compact enclosures Z Large enclosures
Products for the human/machine interface Z Console systems
Material: sheet steel, stainless steel, aluminium and plastic
Industrial network technology Z Input and signalling devices
Solutions for EMC and Ex Cable glands
Power distribution
Electronic packaging
System climate control
IT solutions
Communication systems
For all of your requirements. Fully assembled and functional.
Wherever in the world you develop and implement solutions
for yourself and your customers, we are close at hand. The
global alliance between production, distribution and service
guarantees closeness to the customer. Worldwide!
11/06 Z E155
Rittal has one of the largest ranges of enclosures available
for immediate delivery. However, Rittal also supplies integrated solutions – up to Level 4. This comprises mechanical
installation, power supply, electronic components, climate
control and central monitoring.
Rittal GmbH & Co. KG Z Postfach 1662 Z D-35726 Herborn
Telephone: +49(0)2772 505-0 Z Telefax: +49(0)2772 505-2319 Z eMail: info@rittal.de Z www.rittal.com
Switch to perfection
R
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising