CC-110 and CC-220 Headsets - Clear-Com

CC-110 and CC-220 Headsets - Clear-Com
CC-110 and CC-220 Headsets
Intercom Accessories
Key Features and Benefits
•High-quality dynamic cardioid
•20Hz - 20KHz frequency
•Choice of earpads: leatherette or
soft foam
•Flexible gooseneck microphone
•Boom rotataion ON/OFF switch
for quick microphone muting
•Interchangeable cabling for easy
connector changing and repair
•Fully serviceable headset
•Storage bag included
A versatile range of headsets designed to give excellent
audio quality, comfort and ease of use to suit every need.
The CC-110 (single-ear) and CC-220 (double-ear) premium light-weight headsets
feature high performance headphones and cardioid dynamic microphones that provide
high quality audio.
The CC-110 and CC-220 headsets can be easily adjusted to accommodate the preference
of any user. The microphone boom has a 300° rotation to allow the microphone to be
worn on the left or right side of the head. Users can make the headset larger or smaller
by using the slide adjusts on either side of the headband. Cushioned with super-soft
leatherette or foam padding, the headphones sit on the ear to provide a comfortable fit
for users. A rotating, flexible gooseneck is included for optimal positioning.
Integrated Mute Switch Operation
The CC-110 and CC-200 headset microphones can be turned on and off by moving the
microphone boom. To turn ON the microphone, pull the boom gently downwards (past
the 10 o’clock/2 o’clock position). To turn the microphone OFF, push the boom gently
upwards (above the 10 o’clock/2 o’clock position).
Interchangeable Cabling
The CC-110 and CC-220 headsets have been designed so that the cabling and connector
type can be adapted quickly to the application. Users can order cables with different XLR
connector choices and appropriate pin-outs. To change the connector cable in the field,
simply disconnect the cable from the headset and exchange the cable with a standard
Phillips screwdriver. The same process can be used to repair and replace a damaged cable
on the fly.
CC-110 and CC-220 Headsets
Intercom Accessories
Technical Specifications
Type: Closed-back
Driver: 36mm diameter, neodymium
magnet, copper-clad aluminum wire voice coil
Frequency Response: 20Hz v- 20kHz
CC-110 Headphone: 400 ohms ±30%; at 1kHz
CC-220: 200 ohms ±30%; at 1kHz typical
Microphone: 200 ohms ±30%; at 1kHz typical
Element: Dynamic
Driver: 15mm, neodymium magnet
Polar Pattern: Cardioid
Frequency Response: 250Hz - 20kHz
Cable: 5ft (1.55m) long with 8-pin connector at
headset end; 4-pin Female XLR
CC-110-X5: Single-ear 5-pin Male XLR
CC-110-X6: Single-ear 6-pin Male XLR
(balanced mic)
CC-110-X7: Single-ear 7-pin Female XLR
CC-110-B6: Single-ear no connector
CC-220-X4: Double-ear 4-pin Female XLR
CC-110: 5.1 oz (145g) without 8-pin cable
assembly and M3*18mm SCREW
CC-220: 6.8 oz (195g) without 8-pin cable
assembly and M3*18mm SCREW
Maximum: 500mW
CC-110-X4: Single-ear 4-pin Female XLR
CC-110-Y5: Single-ear 5-pin Female XLR
Packaging for CC-110 and CC-220:
6.7 x 8 x 3.5 in (WxHxD)
(170 x 205 x 90 mm)
Open Circuit Sensitivity: -64 dB ±3.5 dB;
at 1kHz, typical
CC-110: 99 dB ±3 dB (SPL); at 1kHz typical
CC-220: 96 dB ±3 dB (SPL); at 1kHz typical
Order Codes
CC-220-X5: Double-ear 5-pin Male XLR
CC-220-X6: Double-ear 6-pin Male XLR
(balanced mic)
CC-110-X7: Double-ear 7-pin Female XLR
CC-110-Y5: Double-ear 5-pin Female XLR
CC-110-B6: Double-ear no connector
Wiring Diagram for Connector Pin-Outs
Microphone Boom Rotation Switch
Microphone Polar Response
p -p
S to
® Clear-Com and the Clear-Com logo are registered
trademarks of HM Electronics, Inc. Copyright
© 2016. Clear-Com, LLC. All rights reserved.
While Clear-Com makes every attempt to maintain the accuracy of the information
contained in its product manuals, that information is subject to change without
notice. Performance specifications included in this manual are design-center
specifications and are included for customer guidance and to facilitate system
installation. Actual operating performance may vary.
Notice About Specifications
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF