`n` Go Portable Hard Drive USB 3.0

`n` Go Portable Hard Drive USB 3.0
Store ‘n’ Go
Portable Hard Drive
USB 3.0
User Guide
Connecting Portable Hard Drive
Storing and Transferring Data
Nero BackItUp & Burn Essentials Software
Disconnecting Portable Hard Drive
Technical Support
Limited Warranty Terms
FCC Compliance
WEEE Notice
CE Declaration
RoHS Compliance
Your Verbatim Store ‘n’ Go USB 3.0 portable hard drive features highperformance storage using a USB 3.0 “SuperSpeed” interface. USB 3.0
offers up to 10 times faster data rates than USB 2.0, while maintaining
backwards compatibility to any USB 2.0 ports on your computer. Once your
drive is connected properly to your computer, you will be able to use it as
you would any hard drive for storing your data and for performing data
back-up functions.
Note: Capacity dependent on model. 1 MB = 1,000,000 bytes/1
GB = 1,000,000,000 bytes/ 1 TB = 1,000,000,000,000 bytes.
Some capacity used for pre-loaded software, formatting and other
functions, and thus is not available for data storage. As a result, and
due to differing calculation methods, your operating systems may
report as fewer megabytes/gigabytes/terabytes.
Connecting Portable
Hard Drive
Installing your Portable Hard Drive is extremely simple – just use the
included mini-USB 3.0 cable to connect your Portable Hard Drive to any
free USB port on your computer. On Windows computers, a new icon will
appear in My Computer representing your Portable Hard Drive. On Mac OS
systems, your Portable Hard Drive will appear on the desktop as a new disk.
If you are using a USB 1.1 port on your Windows computer, the following
cautionary note may appear on your display: Hi-Speed USB Device
plugged into non-Hi-Speed USB hub. This does not indicate a problem
because the drive is compatible with both USB 1.1 and USB 2.0 ports.
Simply close the message and proceed. However, in this case the drive will
operate only at USB 1.1 speeds.
If you connect your portable hard drive and it doesn’t appear to power up
you may require an additional power source. This is available via an optional
USB-Y cable from our Technical Support team. Details for Technical Support
are included later in the manual.
Storing and Transferring Data
Once your Portable Hard Drive is connected to a computer, it can be
accessed and used like any other removable disk. You can drag files to
your portable hard drive’s icon to copy them, navigate to your hard drive
in Open or Save dialog boxes, or delete files stored on your portable hard
drive. For information on copying, opening, or deleting files, consult your
computer’s documentation.
Nero BackItUp & Burn
Essentials Software
Nero BackItUp & Burn Essentials software is included on the hard drive.
Double click the Nero folder on the drive and then double click the setupx
file to start installation. The Nero installation window will appear. Follow up
the set up wizard to install the software. Note: nero BackItUp software is
only compatible with Windows XP / Vista, and Windows 7.
Green Button Energy Saving
Green Button software enables you to put the hard drive into suspend
mode when not in use.
Disconnecting Portable
Hard Drive
Your Portable Hard drive is hot-pluggable; it can be connected and
disconnected without restarting your computer. To disconnect your
portable hard drive at any time, simply perform the following steps.
You can also disconnect your hard drive at any time while your computer
is powered off.
Note: Please be careful to follow the correct procedure when
disconnecting your unit. Simply unplugging the unit without first
following the instructions below may result in damage to your unit and/
or loss of data.
For Windows Users:
1 If you have files located on your drive open in any applications,
close them.
2 Click the Unplug or Eject Hardware button in the System Tray.
3 Select your drive from the menu that appears.
4 After a moment, Windows will display a message that your hardware
can be safely removed.
For Mac OS Users:
1 If you have files located on your drive open in any applications,
close them.
2 Locate the icon for your drive on the desktop, and drag it to the trash.
Technical Support
If you are experiencing difficulty installing or using your Verbatim product,
please visit the main Verbatim Technical Support website at
www.verbatim-europe.com. From this page you can access our library
of user documentation, read answers to frequently asked questions, and
download available software updates. Although most of our customers find
this content sufficient to put them back on the right track, this page
also lists ways in which you can contact the Verbatim Technical Support
Team directly.
Europe: For technical support in Europe e-mail drivesupport@verbatimeurope.com or call 00 800 3883 2222 in the following countries: Austria,
Belgium, Denmark, Finland, France, Germany, Hungary, Italy, Luxemburg,
Monaco, Netherlands, Norway, Poland, Portugal, Republic of Ireland, Spain,
Sweden, Switzerland and United Kingdom. All other countries call
+353 61 226586.
Limited Warranty Terms
Verbatim Limited warrants this product to be free from defects in material
and workmanship for a period of 2 years from date of purchase. This warranty
excludes batteries. If this product is found to be defective within the warranty
period, it will be replaced at no cost to you. You may return it with your original
cash register receipt to the place of purchase or contact Verbatim.
In the following European countries, Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Hungary, Italy, Luxembourg, Monaco, Netherlands, Norway,
Poland, Portugal, Republic of Ireland, Spain, Sweden, Switzerland and United
Kingdom call 00 800 3883 2222. All other European countries call +353 61
226586. You can email drivesupport@verbatim-europe.com.
Product replacement is your sole remedy under this warranty, and this warranty
does not apply to normal wear or to damage resulting from abnormal
use, misuse, abuse, neglect or accident, or to any incompatibility or poor
performance due to the specific computer software or hardware used.
BREACH OF WARRANTIES OR OTHERWISE. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state or
country to country.
NOTE: Verbatim Limited may at any time revise the content of this user
guide without further notice.
Copyright © 2010 Verbatim Limited. No part of this document may be
reproduced in any form or by any means, for any purpose, without the
express written permission of Verbatim Corporation. All rights reserved.
All other brands and product names referenced herein are property of their
respective owners.
FCC Compliance
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which
entered into force as European law on 13th February 2003, resulted in a major
change in the treatment of electrical equipment at end-of-life.
The WEEE logo (shown at the left) on the product or on
its box indicates that this product must not be disposed
of or dumped with your other household waste. For more
information about electronic and electrical waste equipment
disposal, recovery, and collection points, please contact
your local municipal household waste disposal service or
shop from where you purchased the equipment.
CE Declaration
EC Declaration of Conformity
It is hereby declared that this product complied with the essential
protection requirements of Council Directive 89/336/EEC and its
amendments on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
This declaration applies to all specimens manufactured identical to the
model submitted for testing/evaluation.
EN 55022: 1998 + A1: 2000 +A2: 2003
EN 61000-3-3:1995 + A1: 2001
EN 55024: 1998 + A1: 2001 + A2: 2003
IEC 61000-4-2: 1995 + A1: 1998 + A2: 2000
IEC 61000-4-3: 2002 + A1: 2002
IEC 61000-4-4: 1995 + A1: 2000 + A2: 2001
IEC 61000-4-5: 1995 + A1: 2000
IEC 61000-4-6: 1996 + A1: 2000
IEC 61000-4-8: 1993 + A1: 2000
IEC 61000-4-11: 1994 + A1: 2000
RoHS Compliance
This product is in compliance with Directive 2002/95/EC of the European
Parliament and of the Council of 27 January 2003, on the restriction of the
use of certain hazardous substances in electrical and electronic equipment
(RoHS) and its amendments.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF