JBl OnBeat - Vandenborre
D
d
de
m
fro
e
.b
re
or
nb
de
an
.v
w
w
w
speaker dock for iPod/iPhone/iPad
oa
nl
ow
JBL OnBeat™
Owner’s Manual
D
oa
nl
ow
d
de
m
fro
Important Safety Instructions
an
.v
w
w
w
Regulations
FCC Statement and Warning
Please read thefollowing precautions before use:
or
nb
de
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
13.
Unplug this apparatus during lightning storms or when unused for long periods of time.
6. Statement and W Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
15. Do not expose this apparatus to dripping or splashing
and ensure that no objects filled with liquids, such as
vases, are placed on the apparatus.
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
17. The mains plug of the power supply cord shall remain
readily operable.
– Consult the dealer or an experienced radio/TV
technician for help.
18. Do not expose batteries to excessive heat such as
sunshine, fire or the like.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPARATUS TO RAIN OR MOISTURE.
.
SEE MARKING ON BACK OF PRODUCT.
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE
MANUFACTURER COULD VOID THE USER AUTHORITY TO
OPERATE THE EQUIPMENT UNDER FCC RULES.
IC Statement and Warning
CAUTION
2
– Reorient or relocate the receiving antenna.
16. To completely disconnect this apparatus from the AC
Mains, disconnect the power supply cord plug from
the AC receptacle.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL, WITHIN AN
EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE
PRODUCT’S ENCLOSURE THAT MAYBE OF SUFFICIENT MAGNITUDE
TO CONSTITUTEA RISK OF ELECTRIC SHOCK TO PERSONS.
This equipment has been tested and found to comply with
the limits for aClass B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiateradio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
e
12. Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
2. Keep these instructions.
.b
re
1. Read these instructions.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USERTO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE SERVICING INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE PRODUCT.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada
English
D
oa
nl
ow
d
de
m
fro
3. If you are going to use your JBL OnBeat speaker dock with another
audio source, plug one end of a 3.5mm (1/8") stereo cable (not
included) into the JBL OnBeat speaker dock Audio In connector, and
plug the other end into the audio source’s audio out or headphone
e
.b
re
or
nb
de
1. C
arefully unpack your speaker dock, and confirm that all the items
shown here are included: JBL® OnBeat speaker dock, power supply,
AC cord*, remote control, iPod®/iPhone® adapter clip and iPad™
adapter clip.
an
.v
w
w
w
connecting and setting up your jbl OnBeat™ SPEAKER DOCK
DC IN
POWER
AUDIO IN
USB
VIDEO OUT
3.5mm (1/8") cable
* AC cord varies by region.
2. C
onnect a USB Type Mini B cable (not included) to the JBL OnBeat
speaker dock USB port and to a USB port on the computer on which
your iTunes library is located. This allows you to sync a docked iPod/
iPhone/iPad device with iTunes® (see Synchronizing with your iTunes
Library, on page 6).
DC IN
POWER
AUDIO IN
USB
VIDEO OUT
USB Type B
IMPORTANT: If you play audio through a docked iPod, iPhone or iPad
device and an audio source connected to the Audio In connector at
the same time, you will hear both of their outputs mixed through the
JBL OnBeat speaker dock. To hear only one source, you will need to turn
off the other source (the one you do not want to hear) manually.
Important Note for All Electronic Products:
Before inserting or unplugging audio cables from the
device’s Audio In jack, it is good practice to turn off
the device first. This will prolong the life of your unit,
help protect it from static electricity and prevent
4. If you want to view videos or photos from your iPod, iPhone or iPad
device on a TV, plug one end of a composite video cable (not included)
into the JBL OnBeat speaker dock Video Out connector, and plug the
other end into your TV’s composite video input connector.
www.jbl.com
3
D
oa
nl
ow
d
de
m
fro
an
.v
w
w
w
e
.b
re
or
nb
de
6. Y
our JBL OnBeat speaker dock includes two adapter clips: one for an
iPod touch®/iPod classic®/iPhone device, and another for an iPad device
(NOTE: the iPod 5G and iPod nano® models do not require an adapter
clip.) The adapters allow you to dock units with or without third-party
skins attached. Attach the appropriate adapter clip to the JBL OnBeat
speaker dockdock as shown below.
DC IN
POWER
AUDIO IN
USB
VIDEO OUT
Composite
Video
iPod touch/iPhone
iPad
Locking
Hole
hen you dock your iPod, iPhone or iPad device on the JBL OnBeat
W
speaker dock, its video output will automatically be set to Off, even if it
was turned On before you docked the device.
To turn the JBL OnBeat speaker dock video output on, press the
remote’s Menu button for at least two seconds. The JBL OnBeat
speaker dock status LED will flash once. The video from the iPod,
iPhone or iPad device will play on the connected TV. To turn the video
output off, press the remote’s Menu button again for at least two
seconds. The JBL OnBeat speaker dock status LED will flash twice.
5. Insert the included AC cord all the way into the power supply (if there
is more than one AC cord, use the correct one for your region). Then
connect the power supply into the JBL OnBeat speaker dock DC In
connector and plug it into an AC wall outlet.
DC 12V
AUDIO IN
USB
Insert Pin Into
Locking Hole
Bend Clip
Slightly
Bend Clip
Slightly
VIDEO OUT
7. P
lace your iPod/iPhone/iPad device on the docking connector. Make
sure the device is inserted all the way onto the connector. Press the
top of the iPod/iPhone/iPad device all the way back into the adapter
clip or against the dock to secure it in the dock.
4
English
D
oa
nl
ow
d
de
m
fro
an
.v
w
w
remote control functions
e
.b
re
or
nb
de
To turn the JBL OnBeat speaker dock on, press the Power button on the
unit. The unit’s status LED will glow white when the system is on. To turn the
JBL OnBeat speaker dock off, press the Power button on the unit again.
The status LED will turn off.
w
Using your jbl OnBeat SPEAKER DOCK
To place the JBL OnBeat speaker dock into the Standby mode while an
iPod, iPhone or iPad device is docked, hold down the Play/Pause button
on the remote for two seconds. The status LED will glow amber when the
unit is in the Standby mode. To turn the JBL OnBeat speaker dock from
Standby to on, press any button on the unit or remote control.
Volume Down
The JBL OnBeat speaker dock will automatically enter the Standby mode
whenever no control buttons have been pressed and no audio signal has
been present for 10 minutes. The status LED will glow amber.
Play/Pause*
Previous/Rewind
(Hold for rewind)
Power
Button
Volume Up
Mute/Unmute
Next/Fast Forward
(Hold for fast forward)
Menu Scroll Up
Menu Scroll Down
Menu
Menu Select/Enter
Volume
Buttons
Adjust the volume using the (+) and (–) buttons. Press both buttons
simultaneously to mute the sound; press either button to unmute the
sound.
*
iPod touch, iPhone and iPad menu navigation may require you
to put the iPod/iPhone/iPad device in music mode manually.
www.jbl.com
5
D
oa
nl
ow
d
de
m
fro
an
.v
w
w
w
Synchronizing with YOUR iTunes LIBRARY
To rotate the dock to the landscape mode, turn it 90 degrees
counterclockwise. To rotate it back to the portrait mode, turn it 90 degrees
clockwise. The dock will hold in place at the portrait and the landscape
positions.
Before attempting to synchronize, be sure that the JBL OnBeat speaker
dock USB port is connected to the computer on which your iTunes library
is located.
e
.b
re
Landscape Mode
NOTE: Before attempting to synchronize your iPod/iPhone/iPad device
with your iTunes library, be sure that both your iPod/iPhone/iPad device
and your iTunes library are updated to the latest software version.
or
Portrait Mode
nb
de
rotating the dock
When an iPod or iPhone device is docked in the JBL OnBeat speaker dock,
you can rotate the dock to the landscape mode. IMPORTANT: You cannot
rotate the dock when an iPad device is docked.
1. P
lace your iPod/iPhone/iPad device on the JBL OnBeat speaker
dock docking connector. Make sure the iPod/iPhone/iPad device is
inserted all the way onto the connector.
2. U
se your computer’s iTunes software to synchronize the iPod/
iPhone/iPad device with the iTunes library.
3. W
hen you’re finished synchronizing, eject the iPod/iPhone/iPad
device from the iTunes library.
Status LED
Your JBL OnBeat speaker dock LED will display different colors to indicate
the unit’s status:
Charging a docked iPod/iPhone/iPad DEVICE
Status LED Color
State
The JBL OnBeat speaker dock will charge your iPod or iPhone device
whenever it is docked.
White – Constant
JBL OnBeat speaker dock is on
White – Flashing
JBL OnBeat speaker dock is muted
Amber – Constant
JBL OnBeat speaker dock is in
Standby mode
No LED
JBL OnBeat speaker dock is off
NOTE: The JBL OnBeat speaker dock may not charge a docked iPad
device via the USB connection to a PC. If the iPad device charges when
it is connected directly to the PC via USB, it will charge while docked on
the JBL OnBeat speaker dock. If the iPad device does not charge when
it is connected directly to the PC via USB, it will not charge while docked
on the JBL OnBeat speaker dock.
6
English
D
oa
nl
ow
d
de
m
fro
an
.v
w
w
w
Troubleshooting Your JBL OnBeat SPEAKER DOCK
Solution
No sound (amber LED is not illuminated):
•M
ake sure that the power supply is properly connected to the JBL OnBeat speaker
dock and to a working AC outlet.
No sound (white LED is illuminated):
• Touch the Volume Up (+) button to increase the system volume.
e
.b
re
or
nb
de
Problem
• If you’re using a docked iPod/iPhone/iPad device, make sure that it is properly
docked in the JBL OnBeat speaker dock.
• If you’re using an auxiliary source, make sure that the audio cable is properly
connected to the JBL OnBeat speaker dock Audio In connector and to the source
component’s audio output.
•M
ake sure that the iPod/iPhone/iPad device or other source component is not in the
Pause mode and that its volume control is not turned all the way down.
Sound crackles, hisses or is distorted:
• Turn the iPod/iPhone/iPad device or other source component’s volume down.
• Make sure that the iPod/iPhone/iPad EQ setting is set to “Off.”
Loud hum or buzzing:
•M
ake sure that the audio cable is plugged all the way into the JBL OnBeat speaker
dock Audio In jack.
• Replace the audio cable.
• Unplug the power supply and connect it to a different AC outlet.
Sound comes from only one speaker:
•M
ake sure that the iPod/iPhone/iPad device is properly seated all the way into the
docking connector.
•M
ake sure that the audio cable is plugged all the way into the JBL OnBeat speaker
dock Audio In jack.
• Make sure that the audio cable is a stereo cable.
www.jbl.com
7
D
oa
nl
ow
d
de
m
fro
nb
de
an
.v
w
w
w
Specifications
iPad Wi-Fi® + 3G, iPad Wi-Fi, iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPod touch 4G, iPod touch 3G,
iPod touch 2G, iPod touch, iPod nano 5G, iPod nano 4G, iPod nano 3G, iPod nano 2G, iPod nano, iPod
5G, iPod classic
Transducers:
2 x JBL® Phoenix SE full-range transducers
Power:
6.5 watts x 2
Frequency response:
70Hz – 20kHz
Signal-to-noise ratio:
80dB
Input impedance (Aux):
10k ohms
Input connections:
Main connection – iPod, iPhone or iPad docking connector;
Aux input connection – 1/8" (3.5mm) stereo mini-jack
Operating temperature:
32˚F – 104˚F; 0˚C – 40˚C
Power requirement:
13V DC, 2.5A
Power consumption:
30W (maximum); 0.5W (standby)
Dimensions (H x W x D):
5-3/4" x 10-13/16" x 5-5/16" (146mm x 275mm x 135mm)
Weight:
1.9 lb (0.88kg)
Available finishes:
Black; white
e
.b
re
or
Compatibility*:
* Compatibility at time of writing. For the latest compatibility information, go to www.jbl.com.
8
English
D
oa
nl
ow
d
de
m
fro
e
.b
re
or
nb
de
an
.v
w
w
w
HARMAN Consumer, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
© 2011 HARMAN International Industries, Incorporated. All rights
reserved.
JBL is a trademark of HARMAN International Industries, Incorporated,
registered in the United States and/or other countries. JBL OnBeat is a
trademark of HARMAN International Industries, Incorporated.
iPhone, iPod, iPod classic, iPod nano, iTunes and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
iPad is a trademark of Apple Inc. “Made for iPod,” “Made for iPhone”
and “Made for iPad” mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone and iPad, respectively,
and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards. iPod/iPhone/iPad
not included.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Features, specifications and appearance are subject to change without notice.
www.jbl.com
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising