Cisco Aironet 2800 Series Access Points Data Sheet

Cisco Aironet 2800 Series Access Points Data Sheet
Data Sheet
Cisco Aironet 2800 Series Access Points
The Cisco® Aironet® 2800 Series Wi-Fi access points are highly versatile and deliver
the most functionality in the industry.
Product Overview
For organizations paving the way for the new 802.11ac Wave 2 standard, the Cisco Aironet 2800 Series is the
perfect solution. The access points go beyond getting ready for the new standard, providing the ultimate in
flexibility and versatility.
For large enterprise organizations that rely on Wi-Fi to engage with customers, the 2800 Series is a hands-off
product that’s intelligent enough to make decisions based on end-device activities and usage. This automation
allows you to devote time to other pressing matters, secure in the knowledge that your Wi-Fi network is performing
to its utmost potential.
The Aironet 2800 Series is packed with the features and capabilities that have made Cisco the industry leader, at a
price point that is ideal for managing wireless growth, capacity, and coverage gaps in dense indoor environments.
Features and Benefits
Feature
Benefit
802.11ac Wave 2 support
Provides a theoretical connection rate of up to 2.6 Gbps per radio—roughly double the rates offered by today’s highend 802.11ac access points.
High Density Experience
(HDX)
Best-in-class RF architecture, which provides high-performance coverage for a high density of client devices, giving
the end user a seamless wireless experience. HDX includes features such as custom hardware in 802.11ac Wave 2
radios, Cisco CleanAir®, ClientLink 4.0, cross-access point noise reduction, and an optimized client roaming
experience.
Multiuser Multiple-Input
Multiple-Output
(MU-MIMO) technology
Supporting three spatial streams, MU-MIMO enables access points to split spatial streams between client devices,
to maximize throughput.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 12
*
Feature
Benefit
Flexible Radio
Assignment
Allows the access points to intelligently determine the operating mode of serving radios based on the RF
environment. The access points can operate in the following modes:
● 2.4-GHz and 5-GHz mode: One radio will serve clients in 2.4-GHz mode, while the other serves clients in 5GHz mode.
● Dual 5-GHz mode: Both radios inside the access point operate on the 5-GHz band, maximizing the benefits of
802.11ac Wave 2 and increasing client device capacity.
● Security Monitoring and 5-GHz mode, One radio will serve 5-GHz clients, while the other is scanning the full
spectrum for wIPS attackers, CleanAir interferers, and rogue devices.
Dual 5-GHz radio support
Enables both radios to operate in 5-GHz client serving mode, allowing an industry-leading 5.2 Gbps (2 x 2.6 Gbps)
over-the-air speeds while increasing client capacity.
Smart antenna connector
An intelligent second physical antenna connector is included on 2800 Series models with an external antenna. This
connector provides advanced network design flexibility for high-density and large open-area environments such as
auditoriums, convention centers, libraries, cafeterias, and arenas/stadiums, allowing two sets of antennas to be
connected and active on a single access point.
160-MHz channel support
Supporting channels up to 160 MHz wide, Dynamic Bandwidth Selection allows the access point to dynamically
switch between 20-, 40-, 80-, and 160-MHz channels, depending on the RF channel conditions, providing the
industry’s best-performing wireless network.
Optimized access point
roaming
Helps ensure that client devices associate with the access point in their coverage range that offers the fastest data
rate available.
Zero Impact Application
Visibility and Control*
Uses dedicated hardware acceleration to improve the performance of line-speed applications such as Application
Visibility and Control.
Auto Link Aggregation
(LAG) support
802.3ad (LACP) compliant, allowing both Gigabit Ethernet interfaces to automatically LAG, increasing overall
throughput to the access point.
ClientLink 4.0
Cisco ClientLink 4.0 technology to improve downlink performance to all mobile devices, including one-, two-, and
three-spatial-stream devices on 802.11a/b/g/n/ac while improving battery life on mobile devices such as
smartphones and tablets.
CleanAir 160 MHz*
Cisco CleanAir technology, enhanced with 160-MHz channel support, provides proactive, high-speed spectrum
intelligence across 20-, 40-, 80-, or 160-MHz-wide channels to combat performance problems due to wireless
interference.
Cisco Mobility Express
Flexible deployment mode through the Cisco Mobility Express Solution is ideal for small to medium-sized
deployments that that require 25 or fewer access points. Easy setup allows the 2800 Series Access Points to be
deployed on networks without a physical controller.
Available in a future release.
802.11ac Wave 2 and Beyond
The Aironet 2800 Series extends 802.11ac speed and features to a new generation of smartphones, tablets, and
high-performance laptops, providing a greater end-user experience. Whether your project involves wholesale
changes to your current wireless network or upgrading your legacy Wi-Fi deployments (802.11a/b/g/n/ac wave 1
deployments), the 2800 Series can handle the job.
The 2800 Series supports 802.11ac Wave 2, providing a theoretical connection rate of up to 5.2 Gbps—that’s
roughly 4x the rates offered by today’s high-end 802.11ac access points. The boost helps you stay ahead of the
performance and bandwidth expectations of today’s mobile worker, who usually uses multiple Wi-Fi devices
instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which has
outpaced Ethernet as the default enterprise access network.
High Density Experience
Building on the Cisco Aironet heritage of RF excellence, the 2800 Series access points run on a purpose-built,
innovative chipset with a best-in-class RF architecture. This chipset provides a high-density experience for
enterprise networks designed for mission-critical, high-performance applications.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 12
The 2800 Series is a component of Cisco’s portfolio of flagship, 802.11ac-enabled access points, and delivers a
robust mobility experience based on the following product features:
●
802.11ac Wave 2 with 4x4 multiuser multiple-input multiple-output (MU-MIMO) technology supporting three
spatial streams. MU-MIMO enables access points to split spatial streams between client devices to
maximize throughput.
With two radios built into each access point, the 2800 Series is more versatile than any access point currently on
the market. These radios are outfitted with Flexible Radio Assignment, which means that the access points
automatically self-optimize to better serve the environment. For example, one of the radios broadcasts its signal on
the 5-GHz channel and the other sends out a 2.4-GHz signal. The access point understands the wireless
environment and will automatically switch the 2.4-GHz signal to a 5-GHz signal, increasing the reliability of your WiFi use. This setting automatically works in reverse too, the access point recognizes that the RF environment has
changed as reverts changes back to its original configuration.
The access point also dynamically changes the radio settings based on the wireless environment. The 2800 Series
Wave 2 access point will allow one of the radios to operate in Wireless Security Monitoring mode. Allowing you to
detect wireless security threats, interference, and combat rogue access. This valuable information can be culled in
an easy-to-understand matrix to inform you about your customers.
●
Optimized AP Roaming to ensure that client devices associate with the access point in their coverage
range that offers the fastest data rate available.
●
Cisco ClientLink 4.0 technology to improve downlink performance to all mobile devices, including one-,
two-, and three-spatial-stream devices on 802.11a/b/g/n/ac. At the same time, the technology improves
battery life on mobile devices.
●
Cisco CleanAir technology enhanced with 160-MHz channel support. CleanAir delivers proactive, highspeed spectrum intelligence across 20-, 40-, and 80-, and 160-MHz* wide channels to combat performance
problems due to wireless interference.
●
MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of
signal fade.
Product Specifications
Item
Specification
Part numbers
Cisco Aironet 2800i Access Point: Indoor environments, with internal antennas
● AIR-AP2802I-x-K9: Dual-band, controller-based 802.11a/g/n/ac
● AIR-AP2802I-xK910: Eco-pack (dual-band 802.11a/g/n/ac) 10 quantity access points
Cisco Aironet 2800i Access Point Configurable: Indoor environments, with internal antennas
● AIR-AP2802I-x-K9C: Dual-band, controller-based 802.11a/g/n/ac, configurable
● AIR-AP2802I-xK910C: Eco-pack (dual-band 802.11a/g/n/ac) 10 quantity access points, configurable
Cisco Aironet 2800e Access Point: Indoor, challenging environments, with external antennas
● AIR-AP2802E-x-K9: Dual-band controller-based 802.11a/g/n/ac
● AIR-AP2802E-xK910: Eco-pack (dual-band 802.11a/g/n/ac), 10 quantity access points
Cisco Aironet 2800e Access Point Configurable: Indoor, challenging environments, with external antennas
● AIR-AP2802E-x-K9C: Dual-band controller-based 802.11a/g/n/ac, configurable
● AIR-AP2802E-xK910C: Eco-pack (dual-band 802.11a/g/n/ac), 10 quantity access points, configurable
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify
the regulatory domain that corresponds to a particular country, visit http://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the
Global Price List.
Cisco Wireless LAN Services
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 12
Item
Specification
● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
Software
● Cisco Unified Wireless Network Software Release 8.2.111.0 or later
● Cisco IOS® XE Software Release 16.3
Supported wireless
LAN controllers
● Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services
Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500
Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller
● Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches
● Cisco Mobility Express
802.11n version 2.0
(and related)
capabilities
● 4x4 MIMO with three spatial streams
● Maximal ratio combining (MRC)
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 dynamic frequency selection (DFS)
● Cyclic shift diversity (CSD) support
802.11ac Wave 1
capabilities
● 4x4 MIMO with three spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
802.11ac Wave 2
capabilities
● 4x4 MU-MIMO with three spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80, 160-MHz channels
● PHY data rates up to 5.2 Gbps
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
Integrated antenna
Flexible radio (either 2.4 GHz or 5 GHz)
● 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio
● 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
External antenna
(sold separately)
● 2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment
scenarios
Smart antenna
connector
● Available on the 2802e Series access points only
● Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second
antenna to the access point
● Required when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring
radio
Interfaces
● 2802I/E
◦ 2x100/1000BASE-T autosensing (RJ-45)
● Management console port (RJ-45)
● USB 2.0 (enabled via future software)
Indicators
Dimensions (W x L x H)
Weight
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader
errors
● Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50”
Cisco Aironet 2802i
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 12
Item
Specification
● 3.53 lb (1.6 kg)
Cisco Aironet 2802e
● 4.6 lb (2.09 kg)
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 12
Item
Specification
Input power
requirements
● 802.3at PoE+, Cisco Universal PoE (Cisco UPOE®)
● 802.3at power injector (AIR-PWRINJ6=)
Power draw
● 26W at the PSE with all features enabled except for the USB 2.0 port
● 30W at the PSE with the USB 2.0 port enabled
Environmental
Cisco Aironet 2802i
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: 32° to 104°F (0° to 40°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 2802e
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: -4° to 122°F (-20° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
System memory
● 1024 MB DRAM
● 256 MB flash
Warranty
Limited lifetime hardware warranty
Available transmit
power settings
2.4 GHz
● 23 dBm (200 mW)
5 GHz
● 23 dBm (200 mW)
● 20 dBm (100 mW)
● 17 dBm (50 mW)
● 20 dBm (100 mW)
● 17 dBm (50 mW)
● 14 dBm (25 mW)
● 11 dBm (12.5 mW)
● 14 dBm (25 mW)
● 11 dBm (12.5 mW)
● 8 dBm (6.25 mW)
● 5 dBm (3.13 mW)
● 8 dBm (6.25 mW)
● 5 dBm (3.13 mW)
● 2 dBm (1.56 mW)
● 2 dBm (1.56 mW)
Frequency band and
20-MHz operating
channels
A (A regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
B (B regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
I (I regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
K (K regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.620 GHz; 7 channels
● 5.745 to 5.805 GHz; 4 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.720 GHz; 12 channels
N (N regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.745 to 5.825 GHz; 5 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.745 to 5.825 GHz; 5 channels
C (C regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.745 to 5.825 GHz; 5 channels
Q (Q regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
D (D regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.745 to 5.825 GHz; 5 channels
R (R regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
E (E regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.660 to 5,805 GHz; 7 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
S (S regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
(excludes 5.600 to 5.640 GHz)
F (F regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.745 to 5.805 GHz; 4 channels
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz;, 11 channels
● 5.745 to 5.825 GHz; 5 channels
T (T regulatory domain):
Page 6 of 12
Item
Specification
G (G regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 2.412 to 2.462 GHz; 11 channels
● 5.280 to 5.320 GHz; 3 channels
● 5.745 to 5.825 GHz; 5 channels
● 5.500 to 5.700 GHz; 8 channels
H (H regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
● 5.150 to 5.350 GHz; 8 channels
● 5.745 to 5.825 GHz; 5 channels
Z (Z regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory
domain that corresponds to a particular country, visit http://www.cisco.com/go/aironet/compliance
Maximum number of
nonoverlapping
channels
2.4 GHz
● 802.11b/g:
◦ 20 MHz: 3
● 802.11n:
5 GHz
● 802.11a:
◦ 20 MHz: 25 FCC, 16 EU
● 802.11n:
◦ 20 MHz: 3
◦
◦
◦
◦
◦
◦
20 MHz: 25 FCC, 16 EU
40 MHz: 12 FCC, 7 EU
20 MHz: 25 FCC, 16 EU
40 MHz: 12 FCC, 7 EU
80 MHz: 6 FCC, 3 EU
160 MHz 2 FCC, 1 EU
Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.
Compliance standards
◦
◦
◦
◦
◦
◦
UL 60950-1
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
FCC Part 15.107, 15.109, 15.247, 15.407, 14-30
CAN/CSA-C22.2 No. 60950-1
UL 2043
IEC 60950-1
EN 60950-1
EN 50155
● Radio approvals:
RSS-247 (Canada)
EN 300.328, EN 301.893 (Europe)
ARIB-STD 66 (Japan)
ARIB-STD T71 (Japan)
EMI and susceptibility (Class B)
ICES-003 (Canada)
VCCI (Japan)
EN 301.489-1 and -17 (Europe)
EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
● IEEE standards:
◦ IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d
◦ IEEE 802.11ac
● Security:
◦ 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
◦ 802.1X
◦ Advanced Encryption Standards (AES)
● Extensible Authentication Protocol (EAP) types:
◦
◦
◦
◦
◦
◦
EAP-Transport Layer Security (TLS)
EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MCSHAPv2)
Protected EAP (PEAP) v0 or EAP-MSCHAPv2
EAP-Flexible Authentication via Secure Tunneling (FAST)
PEAP v1 or EAP-Generic Token Card (GTC)
EAP-Subscriber Identity Module (SIM)
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 12
Item
Specification
● Multimedia:
◦ Wi-Fi Multimedia (WMM)
● Other:
◦ FCC Bulletin OET-65C
◦ RSS-102
Data rates supported
802.11b: 1, 2, 5.5, and 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11n HT20: 6.5 to 216.7 Mbps (MCS0 to MCS23)
802.11n HT40: 13.5 to 450 Mbps (MCS0 to MCS23)
802.11ac VHT20: 6.5 to 288.9 Mbps (MCS0 to 8 – SS 1, MCS0 to 9 – SS 2 and 3)
802.11ac VHT40: 13.5 to 600 Mbps (MCS0 to 9 – SS 1 to 3)
802.11ac VHT80: 29.3 to 1300 Mbps (MCS0 to 9 – SS 1 to 3)
802.11ac VHT160: 58.5 to 2304 Mbps (MCS0 to 9 – SS 1 and 2, MCS0 to 8 – SS 3)
Transmit Power and Receive Sensitivity
2.4-GHz Flexible Radio
5-GHz Flexible Radio
Spatial
Streams
5-GHz Radio
Total Tx Power
(dBm)
Rx Sensitivity
(dBm)
Total Tx Power
(dBm)
Rx Sensitivity
(dBm)
Total Tx Power
(dBm)
Rx Sensitivity
(dBm)
1 Mbps
1
NA
NA
23
-101
NA
NA
11 Mbps
1
NA
NA
23
-88
NA
NA
6 Mbps
1
23
-93
23
-91
23
-92
24 Mbps
1
23
-89
23
-87
23
-89
54 Mbps
1
23
-81
23
-77
22
-80
802.11/11b
802.11a/g
802.11n HT20
MCS0
1
23
-93
23
-91
23
-93
MCS4
1
23
-88
23
-86
23
-87
MCS7
1
23
-79
23
-77
22
-78
MCS8
2
23
-93
23
-91
21
-93
MCS12
2
23
-86
23
-85
23
-86
MCS15
2
23
-79
23
-77
21
-78
MCS16
3
23
-93
23
-91
23
-92
MCS20
3
23
-85
23
-84
22
-84
MCS23
3
23
-78
23
-76
18
-77
802.11n HT40
MCS0
1
23
-90
23
-89
MCS4
1
23
-85
23
-84
MCS7
1
23
-76
23
-75
MCS8
2
23
-90
23
-89
MCS12
2
23
-83
23
-83
MCS15
2
23
-76
21
-76
MCS16
3
23
-90
23
-89
MCS20
3
23
-82
23
-81
MCS23
3
23
-75
20
-74
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 12
Item
Specification
802.11ac VHT20
MCS0
1
23
-93
23
-92
MCS4
1
23
-88
23
-87
MCS7
1
23
-82
22
-80
MCS8
1
23
-77
21
-75
MCS0
2
23
-93
23
-91
MCS4
2
23
-86
23
-84
MCS7
2
23
-79
21
-77
MCS8
2
23
-75
20
-73
MCS9
2
NA
NA
NA
NA
MCS0
3
23
-93
23
-91
MCS4
3
23
-85
22
-83
MCS7
3
23
-78
20
-76
MCS8
3
23
-74
19
-72
MCS9
3
23
-72
18
-70
802.11ac VHT40
MCS0
1
23
-90
23
-89
MCS4
1
23
-85
23
-84
MCS7
1
23
-78
22
-77
MCS8
1
23
-75
21
-73
MCS9
1
23
-73
20
-72
MCS0
2
23
-90
23
-89
MCS4
2
23
-83
23
-82
MCS7
2
23
-76
21
-75
MCS8
2
23
-73
20
-72
MCS9
2
23
-71
19
-69
MCS0
3
23
-90
23
-89
MCS4
3
23
-82
23
-80
MCS7
3
23
-74
20
-73
MCS8
3
23
-70
19
-68
MCS9
3
23
-69
18
-67
802.11ac VHT80
MCS0
1
23
-87
23
-86
MCS4
1
23
-83
23
-81
MCS7
1
23
-76
22
-74
MCS8
1
23
-72
21
-70
MCS9
1
23
-69
20
-68
MCS0
2
23
-87
23
-86
MCS4
2
23
-80
23
-79
MCS7
2
23
-73
21
-72
MCS8
2
23
-69
20
-68
MCS9
2
23
-67
19
-66
MCS0
3
23
-87
23
-86
MCS4
3
23
-77
23
-77
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 12
Item
Specification
MCS7
3
23
-72
20
-70
MCS8
3
23
-67
19
-66
MCS9
3
22
-65
18
-64
802.11ac VHT160
MCS0
1
23
-83
23
-83
MCS4
1
23
-78
23
-78
MCS7
1
23
-71
22
-71
MCS8
1
23
-67
21
-68
MCS9
1
23
-66
20
-66
MCS0
2
23
-83
23
-83
MCS4
2
23
-76
23
-76
MCS7
2
23
-69
21
-69
MCS8
2
23
-65
20
-66
MCS9
2
23
-63
19
-63
MCS0
3
23
-82
23
-83
MCS4
3
23
-74
22
-74
MCS7
3
23
-67
20
-68
MCS8
3
23
-62
19
-62
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 12
Warranty Information
The Cisco Aironet 2800 Series Access Points come with a limited lifetime warranty that provides full warranty
coverage of the hardware for as long as the original end user continues to own or use the product. The warranty
includes 10-day advance hardware replacement and ensures that software media are defect-free for 90 days. For
more details, visit http://www.cisco.com/go/warranty.
Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital® can help you acquire the technology you need to achieve your objectives and stay competitive. We
can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital
financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment.
And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 12
Printed in USA
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-736497-03
08/16
Page 12 of 12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising