surftest sj-301 - Kerley Corporation

surftest sj-301 - Kerley Corporation
Form Measurement
PORTABLE SURFACE ROUGHNESS TESTER
SURFTEST SJ-301
Bulletin No. 1988
Excellent, Portable Surface Roughness Testing
with Enhanced Capabilities
World-Class Portable Surface Roughness Testers
Battery-powered portability means better productivity when making surface
roughness measurements on the shop floor.
Capable of performing measurements in any orientation, including vertical and upside-down. Optional accessories,
such as a height gage adapter, allow measurements to be performed easily in various situations and setups.
2
Improved Product Lineup
A wide variety of system setups is possible with the detector + drive unit + display
unit combination.
Standard detector
Measuring force: 0.75mN
Stylus profile: Tip radius: 2μm
Measuring force: 4mN
Stylus profile: Tip radius: 5μm
Drive units
Standard drive unit
For SJ-301
Transverse tracing drive unit
For SJ-301S
Retractable drive unit
For SJ-301R
U Popular standard drive unit
U Best suited for measurement of narrow,
shrouded workpiece features such as
crankshaft bearings, etc.
U The detector is in the retracted position
at rest so it is immune from damage
when inserted into a feature whose
profile cannot easily be seen, such as a
blind hole, etc.
Display unit
Touch-panel operation unit with a built-in printer
SJ-301 series display unit
U For SJ-201P/201S: Standard type
U Common to SJ-301/301S/301R
3
Surftest SJ-301 Series
Unbeatable portable surface roughness tester created for ease-of-use and as a
cost-effective solution to a wide variety of measuring needs
Simple operations performed with the large LCD
touch-panel
Equipped with a large capacity battery that,
when fully charged, allows approximately 600
measurements to be made
U The Measure-Start button and others frequently used are
shop-hardened and resistant to workshop contaminants.
U A convenient carrying case is supplied as standard for protecting
the instrument in the field.
A high-resolution, high-speed printer is built in the main unit.
U Five sets of measurement set-ups can be saved in the unit and the optional memory card (compact flash memory) allows saving of set-ups
and measurements.
U Measurement data also can be saved in the memory card in CSV format and then loaded onto a personal computer for data handling with
spreadsheet software.
4
Result display screen shows the GO/NG judgment
result.
Recorded profile display capability allows surface
texture measurements to be checked instantly, prior
to print-out.
Evaluation parameters conform to internationally
recognized surface roughness standards.
With a broad array of statistical processing
functions, the instrument is ideally suited for
histogram-based data management.
The data deletion function allows on-screen
elimination of flaws that should be excluded from
calculation prior to performing an evaluation.
5
Surftest SJ-301 Series
External view
Unit: Inch (metric)
Drive unit external view
1.02”
(26.0)
.91”
(23.0)
Drive unit type
Standard drive unit
.99”
(25.2)
4.53” (115.0)
Retractable drive unit
.04”
(1)
1.02”
(26.0)
.91”
(23.0)
1.05”
(26.7)
.91”
(23.2)
1.05”
(26.7)
4.53” (115.0)
1.02”
(26.0)
.91”
(23.0)
.08”
(2.0)
Transverse tracing drive unit
.12”
(3.0)
1.77” (45.0)
.26”
(6.6)
1.83” (46.5)
4.53” (115.0)
U Display unit external view
6.50” (165)
3.70” (94)
15°
12.09” (307)
6
Specifications
Model No.
Unit: Inch (metric)
SJ-301
SJ-301R
SJ-301S
4mN type
0.75mN type
0.75mN type
4mN type
178-954-4A (inch/mm) 178-955-4A (inch/mm)
178-993-2A (inch/mm)
178-902-3A (inch/mm)
Measuring
X-axis
.5 inch (12.5mm)
.22 inch (5.6mm)
range
Z-axis
13780μinch (-7880μinch to +5900μinch) (350μm (−200μm to +150μm))
Drive unit
Measuring speed
.01, .02 inch/s (0.25, 0.5mm/s)
.01 inch/s (0.25mm/s)
Measuring motion
Standard
Starts measuring from detector retracted state
Transverse tracing
Conical-taper angle
90°
60°
90°
60°
Stylus tip radius
5μm
2μm
5μm
2μm
Measuring force
4mN
0.75mN
4mN
.75mN
Detector
Stylus tip material
Diamond
Skid radius of curvature
1.57 inch (40mm)
Skid force
400mN or less
Detecting method
Differential inductance
Applicable standards
JIS’82, JIS’94, JIS’01, ISO, ANSI, VDA
Assessed profiles
Primary profile (P), Roughness profile (R), DIN4776, MOTIF-R, MOTIF-W
Ra, Ry, Rz, Rt, Rp, Rq, Rv, Sm, S, Pc, R3z, mr (c), Rpk, Rvk, δc, Rk, Mr1, Mr2, Lo, Ppi, R, AR, Rx, A1, A2, Vo, HSC, mr, SK, Ku, Δa, Δq, Wte, Wx, W, AW
Parameters
Rz1max (ISO), Rmax (VDA,ANSI) (can be customized)
Sampling length
.003, .01, .03, .1, .3 inch (0.08, 0.25, 0.8, 2.5, 8mm)
Number of sampling lengths
×1, ×3, ×5, xL
Arbitrary length
.01 to .49 inch (.01 inch interval) (0.3 ~ 12.5mm (0.1 mm increment))
Cutoff filter
2CR / PC75 / Gaussian
.003, .01, .03, .1, .3 inch (0.08, 0.25, 0.8, 2.5, 8mm)
λc
Cutoff length
100μinch, 320μinch, 1000μinch (2.5, 8, 25μm)
λs
Printer
Built-in thermal printer
Graphical printout
Bearing are curve (BAC1 BAC2), Amplitude distribution curve (ADC)
Printing width
1.89” (48mm) (Paper width: 2.28” (58 mm))
Vertical magnification
×10, ×20, ×50, ×100, ×200, ×500, ×1K, ×2K, ×5K, ×10K, ×20K, ×50K, ×100K, AUTO
Recording
magnification Horizontal magnification
×1, ×2, ×5, ×10, ×20, ×50, ×100, ×200, ×500, ×1K, AUTO
Customization
Desired parameters can be selected for calculation and display.
Statistical processing
Maximum value, minimum value, mean value, standard deviation, pass rate, frequency distribution chart of each parameter
GO/NG judgment
Upper/lower limits setting: 3 parameters, GO/NG judgment rule: mean value, 16% rule, maximum value rule
Measurement conditions saving
Maximum 5 sets
Function
Data saving
Save/retrieval of measurement conditions (up to 20 sets), evaluation data, sampling data, and statistical data with a memory card (option).
Calibration
Auto-calibration with the entry of numerical value.
Power saving function
If the auto-power-off function ON: Power turns off if not operated for 5 minutes
External input/output
RS-232C I/F, SPC output
Power supply
Two-way power supply: battery (rechargeable Ni-H battery) and AC adapter.
Charging time
15 hours maximum
Battery
Recharge cycles
Approximately 600 times (slightly varies with the usage and environmental conditions)
External dimensions Display unit
12.09"x6.50"x3.70" (307×165×94mm)
(W×D×H)
Drive unit
4.53"x.91"x1.02" (115×23×26mm)
Display unit
2.65 lbs. (1.2kg)
Mass
Drive unit
.44 lbs. (0.2kg)
LCD dimensions
3.94"x2.76" (100×70mm), Touch-panel type
12BAA686
Connecting cable
12BAA686
Connecting cable
Roughness specimen
178-606 (inch/mm)
178-602 (inch/mm)
Roughness specimen (Ra3μm)
(Ra1μm)
357651
AC adapter
357651
AC adapter
12AAA217
Flat surface nosepiece
12AAE643
Point-contact adapter
12AAA218
Cylinder nosepiece
12AAE644
V-type adapter
Standard accessories
12AAA216
Supporting feet set
353134
Calibration stage
12BAA689
Touch-pen
12BAA689
Touch-pen
12BAA690
Protector sheet
12BAA690
Protector sheet
541106
Flat-blade screwdriver
541106
Flat-blade screwdriver
270732
Printer paper (5 rolls)
270732
Printer paper (5 rolls)
12BAA781
Carrying case
12BAA781
Carrying case
Optional accessories, consumables, and others for SJ-301
U Printer paper (5 rolls)
U Durable printer paper (5 rolls)
U Touch-panel protector sheet (10 sheets)
U Memory card *1
No.270732
No.12AAA876
No.12AAA896
No.12AAA841
7
*1: Compact flash (CF) card on the market is also available.
Optional accessories
Drive unit, Display unit
Display unit
Drive unit
Standard drive unit
Order No.178-230-2
Model No.
SJ-301
Transverse tracing
Order No.178-234-2
Order No. 178-241-3A
Detector retracting type
Order No.178-235
SJ-301S
SJ-301R
Detector
Unit: Inch (Metric)
Standard detector
Extra-small hole detector
4mN type
0.75mN type
No.178-390
No.178-296
No.178-393
Minimum measurable hole diameter:
ø .11" (ø 2.8mm)
(Stylus tip radius 2μm, 60º)
No.178-395
(Stylus tip radius 2μm, 90º)
.19” (4.8)
2.34” (59.5)
.06”
Small hole detector
ø.35” (ø9)
.06” (1.6)
.03”
(0.8)
.07” (1.8)
2.40” (61)
Stylus
.02” (0.4)
.65”
(16.4)
2.37” (60.3)
Stylus
.50”
(12.8)
ø. 0
( ø 2 9”
.4 )
.09”
(2.4)
ø.35”
(ø9)
.14”
(3.5)
ø.24” (ø6)
Stylus tip radius 10μm type No.178-391
Deep groove detector
No.178-392
Minimum measurable hole diameter:
ø .18" (ø 4.5mm)
8
.06”
.19”
(4.8)
ø.35” (ø9)
.08”
(2)
.39”
(10)
.19” (4.8)
.35” (9)
ø.54”
ø13.6)
.65”
(16.4)
* Not available for the transverse tracing drive unit.
2.40” (61)
.14” (3.5)
Stylus
.65”
(16.4)
2.40” (61)
Stylus
ø.35” (ø9)
ø.1
5
( ø3 ”
.8 )
.14”
(3.5) .06”
(1.5)
No.178-394
Maximum accessible groove depth: .31" (8mm)
Optional accessories: Drive unit accessories
Drive unit, Display unit
Nosepiece for flat surfaces
Nosepiece for cylindrical surfaces
No.12AAA217
* SJ-301 standard accessories
* Not available for the transverse
tracing drive unit.
No.12AAA218
* SJ-301 standard accessories
* Not available for the transverse
tracing drive unit.
Nosepiece for flat surface
No.12AAA217
V-type adapter
Point-contact adapter
No.12AAE644
* SJ-301S standard accessories
* Dedicated to the transverse tracing
drive unit.
Extension rod 1.97" (50mm)
No.12AAA210
* Not available for the transverse
tracing drive unit.
No.12AAE643
* SJ-301S standard accessories
* Dedicated to the transverse tracing
drive unit.
7.7mm
m
72m
Extension cable 39.40" (1m)
(Note: Extension is possible with only a single rod.)
Extension rod 1.97” (50mm)
No.12AAA210
Vertical positioning adapter
No.12AAA219
* Not available for the
transverse tracing drive unit
Support feet set
No.12AAA216
Magnetic stand adapter
No.12AAA220 (ø.375")
No.12AAA221 (ø8mm)
(Note: Extension is possible with only a single cable.)
No.12BAA303
Support feet set
No.12AAA216
* SJ-301 standard
accessory
* Not attachable to
the detector side
of the transverse
tracing drive unit.
Nosepiece for
cylindrical surface
No.12AAA218
Vertical positioning
adapter
No.12AAA219
Height gage adapter
No.12AAA222 (9mm x 9mm)
No.12AAA233 (1/4" x 1/2")
Magnetic stand
adapter
No.12AAA221
Height gage adapter
No.12AAA222
9
Optional Accessories: Setting attachments
Setting attachments
* Not available for the transverse tracing drive unit
Enhances measurement efficiency by facilitating the measurement setup of multiple workpieces of the same type and of the
hard-to-access sections of a workpiece.
Setting attachment: V type for measuring
in the cylinder axis direction
No.178-033
The V-width is adjustable
to the cylinder diameter
facilitating axial measurement
of a wide range of cylinder
diameters.
U Adjustable range:
ø.20"~ø5.91" (ø5~ø150mm)
Setting attachment: Magnetic slider type
Setting attachment: Inside diameter type
No.178-034
No.178-035
The magnet attached to
the frame bottom surface
allows taking hands-free
measurement on the wall.
Greatly facilitates measurement of
internal wall surfaces of, for
example, a cylinder block.
U Applicable diameter: ø2.95"~ø3.74"
(ø75~ø95mm)
U Accessible depth: 1.18"~5.31"
(30~135mm)
Optional Accessories: Printer
DP-1VR
Powerful data management capabilities make it possible to process the Digimatic data output from the Surftest SJ
series for measurement data printout, various statistical analyses for plotting a histogram and D-chart, and calculation
of X-R control charts. Also, it is equipped with the RS-232C GO/NG judgment output
for connection to a personal computer.
● Digimatic mini-processor DP-1VR
No.264-504-5A*
*A Digimatic Connecting Cable is required to use DP-1VR
● Digimatic connecting cable
Cable length 39.40" (1m): No.936937
Cable length 78.80" (2m): No.965014
10
Optional Software: SURFPAK-SJ
Surface roughness analysis program SURFPAK-SJ
An upgraded data analysis system can be built by connecting the
Surftest SJ series to a personal computer.
● Capable of diversified analyses of surface textures, including calculations of varieties
of parameters and graphical data analyses.
● Equipped with a flexible report generating function that allows freely laying out the
recorded profiles and the calculation results in the report.
An RS-232C cable is also required.
U SJ-301 series RS-232C cable *1 No.12AAA882
*1: Equivalent to RS-232C straight cable with D-sub 9-pin female connector.
Assessed profile window:
The size of the assessed profile
display can be easily changed.
Analysis graph window:
Various analysis graphs
can be created.
Measurement result window:
Provides a great variety of
parameters conforming to most
of the world's standards.
Evaluation conditions
window:
For various recalculations
of the measured data.
Measuring condition setting
window
Operation window
Measuring conditions setting window
Machine operation icons for
SJ-301/401
11
One Number to Serve You Better
1-888-MITUTOYO (1-888-648-8869)
Aurora, Illinois
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and
performance data contained in this printed matter as well as other technical data are to be regarded as approximate
average values. We therefore reserve the right to make changes to the corresponding designs. The stated standards,
similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition,
the latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may
be regarded as definitive.
Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of Mitutoyo
products may require prior approval by an appropriate governing authority.
Trademarks and Registrations
Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where
Mitutoyo America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The
appropriate companies should be contacted for more complete trademark and registration information.
We reserve the right to change specifications and prices without notice.
^ÊÓä£äʈÌÕ̜ޜʓiÀˆV>Ê
œÀ«œÀ>̈œ˜]ÊÕÀœÀ>ÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊäΣä‡ä™ÊUÊ*Àˆ˜Ìi`ʈ˜Ê1-ÊUÊ>ÀV…ÊÓä£ä
(Corporate Headquarters)
Westford, Massachusetts
Huntersville, North Carolina
Mason, Ohio
Plymouth, Michigan
City of Industry, California
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising