LLX18-RGB Color-changing linear LED strip

LLX18-RGB Color-changing linear LED strip
LLX18-RGB Color-changing linear LED strip - 24V
The LLX18-RGB is a small
profile and energy efficient
color-changing light strip. It
is easily installed directly on
to the mounting surface with
double sided tape or within
discrete mounting extrusions.
The durable but flexible circuit
board enables the perfect fit
for every application.
Applications: Indoor only above and below cabinets,
cove lighting, architectural
reveals, under banister,
display cases, etc.
Beam Angle
120˚
Average life
50,000 hours
Mounting
LLX18-RGB strip is equipped with 3M
self-adhesive tape. The strip must be
adhered to either a Luminii
aluminum profile or an unpainted
aluminum surface. For other
surfaces the HST Aluminum heat sink
tape will be required to reach the
rated 50,000 hours average life
Approvals
Class 2 damp listed
Warranty
5 years
Technical specifications
MODEL
Section start/end options
LLX18-RGB
LEDs/ft
18
Soldered leads (72”)
Light output
169 lumen/ft*
Average power
consumption (for
15’ section
3.9 W/ft*
Amperage load
at maximum run
4.0 A
Ordering
increment
4.00”
Maximum run
length (in series)
30 ft
Dimensions
No connector
0.39” W
0.09” H
*with all 3 circuits at full brightness
Ordering code
MODEL
SECTION START
SECTION END
LENGTH
LLX18-RGB
LLX18-RGB
SL
SL - Soldered lead
wires (72”)
NC - No connector
NC
SL - Soldered lead
wires (72”)
NC - No connector
View specifications
for increment options
REV4.0
page 1 of 4
www.luminii.com
tel: 224-333-6033
LLX18-RGB Color-changing linear LED strip - 24V
Accessories
Mounting clip:
recommended at every 12” when
LineLED strip is facing down.
0.19”
Heat sink tape:
Splice Box:
no extrusions are ordered.
splice box, black.
included with LineLED strip when
0.05”
Part # CL-1
low voltage, 4 terminal
Part # HST
0.40”
Part # LVSP-4T -BK
0.90”
1.00”
2.00”
0.23”
3.00”
1.90”
Power consumption per linear foot*
* with all 4 circuits at full brightless
Length of
Strip (LF)
W/ft
Total
wattage
Length of
Strip (LF)
Total
wattage
1
4.60
4.60
11
4.10
45.10
21
3.55
74.55
2
4.55
9.10
12
4.05
48.60
22
3.45
75.90
3
4.50
13.50
13
4.00
52.00
23
3.40
78.20
4
4.45
17.80
14
3.95
55.30
24
3.35
80.40
5
4.40
22.00
15
3.90
58.50
25
3.30
82.50
6
4.35
26.10
16
3.85
61.60
26
3.25
84.50
7
4.30
30.10
17
3.75
63.75
27
3.15
85.05
8
4.25
34.00
18
3.70
66.60
28
3.10
86.80
9
4.20
37.80
19
3.65
69.35
29
3.05
88.45
10
4.15
41.50
20
3.60
72.00
30
3.00
90.00
W/ft
Length of
Strip (LF)
Total
wattage
W/ft
Power supply
See fixture and power supply instructions & spec sheet for wiring information. Dimming possible in select models - view Luminii website for list of compatible dimmers.
Non-Dimming:
MODEL
POWER
PSV
PSV - PSV Series
40
40 - 40 W
60 - 60 W
96 - 96 W
OUTPUT
24V
24 - 24 VDC
DIMMING
LOCATION
U2ND
U2ND - Non Dimming
- Requires a controller & a decoder to work properly
D
D - Dry Location
IP65 - Wet Location
MODELS
PSV Dry
PSV Wet
A Length
9.2”
9.5”
B Width
3.4”
4.12”
C Depth
1.9”
2.3”
A
B
C
DMX:
MODEL
PSDMX
PSDMX - DMX Power Supply
dims down to 0%
POWER
OUTPUT
3X100
3X100 - 3 X 100 WATT
24
24 - 24 VDC
- Features eldoLED’s LINEARdrive configurable dimmable drivers
REV4.0
C
MODELS
PSDMX
A Length
15.75”
B Width
6.60”
C Depth
4.80”
page 2 of 4
B
A
www.luminii.com
tel: 224-333-6033
LLX18-RGB Color-changing linear LED strip - 24V
DMX-3Z-RGBW
RGBW LED 1 or 3 Zone Controller
DMX /Wireless RGB-W wall-mount controller
controls DMX lighting fixtures, wireless control of RGB-W
lighting fixture or use both simultaneously. Fits in any
standard US switch box. Includes all the outputs in the back
of the controller.
Control brightness levels with a single touch, personalize and
memorize 3 different scenes, and even create 3 variations of
white.
ORDERING CODE
Model
DMX
DMX - DMX controller
Zones
3Z
3Z - Three Zone
1Z - One Zone
Color
RGBW
RGBW - Red, Green,
Blue & White
Touch DMX Controller
Operating voltage
12 - 24V DC
Features
• 2 in 1 in-Wall Controller: DMX
Control or Wireless RGB-W
• 65,000 Color Options,
Dimming and Speed Control
• Memory Function
• 50 Foot Wireless Range
• Easily Fits Standard US Switch
Boxes
• Touch Sensitive Glass Surface
• Includes 10 Built in Programs,
or Create and Play Your Own
Color parameters
• Brightness
• Saturation
• Primary colors
• Fading
• Color changing speed
Touchscreen digital LED controller
Programmable
advanced
DMX512
lighting controller featuring a touchscreen interface. Operates as stand
alone controller or integrated with most
architectural lighting control systems.
Can controller endless DMX512 enabled
devices.
ORDERING CODE
Model
TSDMX
TSDMX - Touchscreen DMX
controller
Mounts to standard single or dual gang
wall box with the included power supply
inside the junction box. Terminal block
design for power and data connections.
Power supply
9 VDC (included)
Data programming
USB 2.0 computer connection
required for initial setup
Output signal
DMX512 (1024 channels)
Sound activation
Built in microphone
Color parameters
• Brightness
• Saturation
• Speed of color changing
sequence
• Fading / dimming / brightness
DMX decoder
DMX signal to RGBW decoder (required to operate DMX controller)
Translates controller DMX512 programs for RGB and
white LED strips.
Unique DMX address for the decoder can be set easily
and displayed by the numeric display on the case.
Changing and resetting the DMX address requires
manual input.
Use power repeater to expand output.
Operating voltage
12-36 VDC
Power capacity
up to 96W at 24V
Operating temperature
range
from -4˚F to +122˚F in case
ORDERING CODE
Model
DDMX-RGBW
DDMX-RGBW - DMX decoder
REV4.0
page 3 of 4
www.luminii.com
tel: 224-333-6033
LLX18-RGB Color-changing linear LED strip - 24V
Optional mounting channels - lens type per channel / light transmission percentage per lens / dimensions
Lens options / light transmission percentage per lens
CL Clear
HF Half (50%) frosted
N Narrow
F Frosted
M Medium beam frosted
G Gel color filter suitable
0.99”
0.94”
CL 70%
F 50%
CL 78%
F 50%
1.20”
CL 79%
F 58%
0.69”
HF 61%
Alu-Round
HF 69%
Alu-45
CL 85%
F 63%
HF 75%
M 87%
Alu-Corner
CL 85%
F 63%
0.69”
0.27”
CL 63%
F 43%
0.95”
0.69”
HF 54%
M 65%
0.27”
HF 75%
M 87%
N 84%
G 78%
0.69”
0.59”
N 60%
G 54%
N 84%
Slim Line 7
0.33”
0.72”
Recessed Slim Line 7
Slim Line 15
0.63”
CL 63%
F 43%
HF 54%
M 65%
N 60%
0.95”
2.05”
CL 85%
F 63%
0.59”
0.30”
HF 75%
M 87%
0.69”
CL 47%
F 44%
Alu-Flat
Recessed Slim Line 15
2.76”
2.36”
Alu-Wall
1.16”
CL 85%
F 60%
0.33”
0.33”
CL 85%
F 60%
0.89”
HF 71%
0.89”
0.89”
HF 55%
HF 71%
Slim Wide 8
0.62”
CL 69%
F 44%
Recessed Slim Wide 8
Slim Wide 15
0.66”
3.24”
3.93”
F 34%
Alu-Stair
Installation
All mounting channels are field
cuttable using miter saw with circular
blade suitable for cutting aluminum.
2.31”
1.81”
1.81”
F 34%
Alu-Stair-Carpet
Alu-Edge
1.00”
Sample layout
wireless or wired
RGB controller
Ordering
Extrusions are sold separately. View
respective specsheets for details
on ordering extrusions and their
accessories (endcaps, mounting
brackets, etc).
LLX18-RGB
+
receiver / decoder
(not needed if using
PSDMX power supply)
LLX18-RGB
24V PSV
power supply
repeater
OPTIONAL
REV4.0
page 4 of 4
www.luminii.com
tel: 224-333-6033
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising