Mal Nairn Tablet
Mal Nairn Projection Room Tablet
The purpose of this document is to outline the process to control at audio visual system
remotely using the Samsung Tablet located in the Projection Room.
Prerequisite
External clients require a CDU temporary internet account to use the system. If a
temporary internet account has not been requested, go to the IT Kiosk during business
hours Mon-Fri 8am to 4pm allowing 10-15 minutes for the temporary internet account
request to be authorised, created and activated.
Location of the tablet.
The tablet can be located in the projection room
sitting on a charging dock.
Turning on the tablet.
The tablet can be turned on by pressing the Home
Button located on the bottom bevel and then
following the on screen instruction to Swipe the
screen.
Connect the tablet to the wifi network.
1. Access the home screen by pressing the Home
Button on the bottom bevel of the tablet.
2. Press the Settings button on the screen
3. Select the Connections tab at the top of the screen.
4. Select Wi-Fi on the left and make sure the toggle
is set to the ‘green I’ position.
5. There are a number of Wi-Fi networks to connect
to Select ‘eduroam’
Red 7 Mal Nairn Auditorium
Page | 1
6. Enter the following information in the window.
EAP method: PEAP
Phase 2 authentication: MSCHAPV2
CA certificate: (unspecified)
Identity: username@cdu.edu.au
Anonymous identity: leave blank
Enter password: password
7. Click Connect.
8. Once connected press the Home Button again to the
return.
9. Start -> TP Control Application.
10. If there is a red box with Not Connected the
tablet is not connected to the wifi network return
to step 1. If connected successfully start using the
tablet following the room instructions.
At the end of the Lecture
Complete the following to ensure the WiFi credentials have been removed from the tablet.
1. Access the home screen by pressing the Home
Button on the bottom bevel of the tablet.
2. Press -> Settings button on the screen
3. Select -> Connections tab at the top of the
screen.
4. Select -> Wi-Fi tab on the left of the screen.
5. Select -> Wi-Fi Network you are connected to.
6. Press -> Forget buttons.
7. Press -> Home Button
8. Return the Tablet to the charging dock in the
projection room.
Red 7 Mal Nairn Auditorium
Page | 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising