iConverter 19-Module Chassis
iConverter
®
iConverter 19-Module Chassis
Managed Redundant-Power Chassis
The iConverter 19-Module Chassis is designed for Enterprise
Local Area Network (LAN) and Metropolitan Area Network
(MAN) applications where fault tolerance and a high-density
rack footprint are essential. The 2U (3.5 inch) high iConverter
19-Module Chassis supports up to three power supplies for
redundancy, and can be mounted in a 19-inch or 23-inch rack.
The 19-Module Chassis features up to three hot-swappable,
redundant power supplies. Universal AC, 24VDC and 48VDC
powering options are available. The power supplies operate
in load-sharing mode to reduce the burden on each power
supply to extend the lifetime and fault tolerance.
Power is provided to the nineteen iConverter modules
installed in the chassis via the chassis backplane. When used
with an iConverter management module, the management
capabilities include the ability to monitor the voltage, current
and temperature of each power supply. Any out-of-range
violation can trigger an SNMP trap to allow quick corrective
maintenance.
In addition to handling the power and management data for
each iConverter module, the 19-Module Chassis backplane
allows sharing of Ethernet data between the individual
modules. iConverter modules that are installed in adjacent
slots and equipped with Ethernet backplane ports have the
ability to connect to each other via the chassis’ Ethernet
backplane and facilitate a variety of flexible management
options including unmanaged, out-of-band managed, in-band
managed and multi-port configurations.
The high reliability of the redundant power system combined
with its AC and DC power options and its ability to hold
nineteen modules in a 2U height make the iConverter
19-Module Chassis the ideal choice in the core of an enterprise,
in a Central Office (CO) or for Point of Presence (POP)
applications where reliability and space are critical.
The iConverter 19-Module Chassis supports the entire family
of iConverter fiber media converters. All iConverter modules
are hot swappable and support multiple mounting options.
Modules not included
KEY FEATURES
■■ The high-density iConverter 19-Module Chassis is 2U
high and supports 19-inch or 23-inch rack mounts
■■ Up to three hot-swappable AC, 24VDC and 48VDC
power supplies for mission-critical networks
■■ NEBS Level 3 Certification
■■ Ethernet Backplane allows modules to share data to
support a wide variety of network applications
■■ Fiber Cable Management Tray available for highdensity CWDM deployments
■■ Up to 19 iConverter chassis can be linked and
managed using a single IP address
■■ All iConverter modules are hot-swappable when used
with the 19-Module Chassis
■■ Management is available with the addition of a
management module to the chassis
■■ SNMP management via NetOutlook® provides real-time
port and module status information, remote parameter
configuration and trap notification
■■ Commercial (0 to +50° C), wide (-40 to +60° C) and
extended (-40 to +75° C) temperature ranges
■■ Lifetime Warranty and free 24/7 Technical Support
MANAGEMENT
ORDERING INFORMATION
Management provides remote configuration, monitoring and
trap notification. Management of the chassis and modules is
accomplished by installing an iConverter Management Module
(NMM2) or Network Interface Device (NID) in the same chassis.
19-Module Chassis
AC
48VDC
AC
High
24VDC
48VDC
High
(60 watts) Airflow
(66 watts) (66 watts)
Airflow
(120 watts)
(120 watts)
Description
The Management Module can be accessed via SNMP, Telnet
and serial port. The chassis and modules can be managed
with Omnitron’s intuitive, graphic-oriented NetOutlook SNMP
Management Software or third party SNMP management
software. Management via the Telnet and the serial interfaces
have an easy-to-use, menu-driven interface.
One (1) Power Supply
8200-1
8201-1
8206-1
8205-1
8207-1
Two (2) Power Supplies
8200-2
8201-2
8206-2
8205-2
8207-2
Three (3) Power Supplies
8200-3
8201-3
8206-3
8205-3
8207-3
Spare Power Supply
8200-9
8201-9
8206-9
8205-9
8207-9
Fixed parameters that can be monitored on the 19-Module
Chassis include the chassis type and model, manufacturing
information, along with hardware and software revisions and
serial numbers of the power supplies.
High Airflow power supplies (120W) cannot be installed in the same chassis with other
types of power supplies.
In addition, the power supply modules can generate SNMP
traps for out of voltage or chassis temperature range violations.
All of these events can selectively enabled or disabled to
generate SNMP traps.
SPECIFICATIONS
Description
For wide temperature (-40 to 60°C), add a “W” to the end of the model number.
Contact Omnitron for extended temperature (-40 to 75°C) and RoHS (5/6) compliant
models.
Use the Power Calculator to determine the iConverter chassis power supplies required for
your module configuration.
NOTE: Dying gasp is only supported when a Management module is installed in a
1-Module or 2-Module chassis with dying gasp support. 19-Module chassis does not
support dying gasp.
Accessories
Model Number
Description
8091-2
23” Rack Mount Kit
8095-1
19” Cable Management Tray
8095-2
23” Cable Management Tray
8090-0
Blank Module Panel
19-Module AC
19-Module AC
High Airflow
19-Module 24VDC
19-Module 48VDC
19-Module 48VDC
High Airflow
8200-x
8201-x
8206-x
8205-x
8207-x
Model Number
Module Capacity
19
Power Supply
Capacity
1, 2 or 3 Hot-Swappable Power Supplies
Regulatory
Compliances
UL, CE, FCC Class A, NEBS Level 3, RoHS2 (6/6), WEEE, REACH
Input Power
Requirements
(typical)
100 to 240VAC
50/60Hz
2.0A @ 120VAC
100 to 240VAC
50/60Hz
2.5A @ 120VAC
+/- 18 to 36VDC
6.0A @ 24VDC
+/- 36 to 60VDC
3.0A @ 48VDC
+/- 36 to 60VDC
5.0A @ 48VDC
Output Power
60 watts
18A @ 3.3VDC
120 watts
36A @ 3.3VDC
66 watts
20A @ 3.3VDC
66 watts
20A @ 3.3VDC
120 watts
36A @ 3.3VDC
Power Connector
IEC 320 Socket
IEC 320 Socket
3-Pin Terminal (Isolated)
3-Pin Terminal (Isolated)
3-Pin Terminal (Isolated)
Dimensions
W: 17.15” x D: 14.0” x H: 3.5”
L: 435.61 mm x B: 355.6 mm x H: 88.9 mm
With 1 Power Supply:
With 2 Power Supplies:
With 3 Power Supplies:
Weight
Temperature
Commercial:
Wide:
Storage:
Humidity
16.0 lbs (7.26 kg)
18.5 lbs (8.39 kg)
21.0 lbs (9.53 kg)
0 to 50°C
-40 to 60°C
-40 to 80°C
5 to 95% (non-condensing)
Altitude
-100m to 4,000m
MTBF (hrs)
Warranty
With 1 Power Supply:
With 2 Power Supplies:
With 3 Power Supplies:
45,700
182,000
731,000
Lifetime warranty with 24/7/365 free Technical Support
© 2016 Omnitron Systems Technology, Inc. All rights reserved. iConverter and NetOutlook are Registered Trademarks of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications are subject to change without notice.
091-18200-001P
6/16
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 38 Tesla, Irvine, CA 92618
iConverter 19-Module Chassis
Page 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising