DC-700 - Sony Japan

DC-700 - Sony Japan
XCL
DC-700 (J)
DC-700 (UC)
DC-700CE
XCG
Digital Video Camera
CAMERA ADAPTOR
XC (Non-TV Format)
Dimensions
The DC-700/700CE is a compact, lightweight camera adaptor
for XC series cameras. In line with the size reduction of XC
series cameras, it is smaller and lighter than the conventional
power adaptors (DC-77RR and DC-777). It is compatible
with all of the XC series cameras and accessories, includes
VIDEO OUT 2, TRIG IN, and WEN OUT connections.
88
22
Features
12.7 ø 10 ø
16
XC (TV Format)
150
152
160
Analog Video Camera
Outline
■■Compact, lightweight
■■External sync input/output
■■Trigger input/WEN output
■■Built-in high-performance switching power supply
3.8
9
109.8
50
99
Unit: mm
Color Camera Block
FCB-SD
FCB-HD
FCB-4K
Accessories
Rear Panel
HD
Specifications
CAMERA
DC-700 (J) DC-700 (UC) DC-700CE
Region
Signal system
Power requirements
Voltage
Output voltage
Power consumption
Operating
temperature/humidity
Storage
temperature/humidity
Input terminals
Mass
Dimensions (W x H x D)
Supplied accessories
Regulatory compliance
Japan
EIA / NTSC
AC 100 V
34 VA
USA
EIA / NTSC
AC 100 to 120 V
50 Hz / 60 Hz
DC 13 V, 1.3 A
22 W
Europe
CCIR / PAL
AC 100 to 240 V
22 W
-30˚C to +60˚C/10% to 90% (no condensation)
WEN
TRIG
HD
VD/SYNC
VIDEO1
VIDEO2
CAMERA
terminal BNC type (1)
terminal BNC type (1)
terminal BNC type (1)
terminal BNC type (1)
terminal BNC type (1)
terminal BNC type (1)
terminal
12-pin (1)
700 g
110 × 53 × 160 mm
Power cord (1), Operating instructions (1),
AC plug adaptor (1) (Included with DC-700(J))
FCC Class A,
Electrical
UL1310CE: EN61326 &
Appliance and
1+CSAC22.2
EN60065,
Material Safety
No.223, FCC/
AS/NZ: EN61326,
Law
ICES-003: ClassA Demko:EN60065
The above products comply safety standards for each district.
Select the product suitable to the district to use.
Accessory
Mode
Switch*2
TRIG
-5˚C to +45˚C/10% to 90% (no condensation)
Note
86
VIDEO 1
WEN
VIDEO 2*1
VD/SYNC
AC input
*1 Two video outputs may not be available for some types of cameras.
This becomes TRIG input terminal when using, XC-56, XC-56B, XC-55, XC-55BB.
*2 Set the switch to 2 only when using XC-999.
Connector Pin Assignments
Pin
No.
1
2
3
4
5
6
7
8
9
10
11
12
Ground
+13 V
Ground
VIDEO 1
Ground
HD
VD/SYNC
Ground
VIDEO 2 *
WEN
TRIG
Ground
* This becomes TRIG input terminal
when using XC-55, XC-55BB, XC-56,
XC-56BB.
* The production of underlined models
is discontinued.
Block Diagram
3
VIDEO 1
4
Ground
5
HD
6
VD/SYNC
7
+13 V
Ground
8
3
3
VIDEO 2
9
2
2
WEN
10
1
1
TRIG
11
Ground
12
1
2
SW101
R
4
SWITCHING
3
L
2
FG
Regulator
1
GND
NL
2
3
CN302
VIDEO 1
1
2
3
CN303
HD
G
N
D
L
E
D
CN304
VD/SYNC
13 V
CN305
VIDEO 2
−
+
CN306
WEN
700-LED
* When input the trigger signal, the high level of the signal is less than DC5V.
XC (TV Format)
CN307
TRIG
Analog Video Camera
1
XC (Non-TV Format)
2
Ground
XCG
+13 V
Mode switch
Digital Video Camera
1
XCL
Ground
Comparative Tables
Comparison with DC-77RR and DC-777 Camera Adaptors
2 video outputs
*1
DC-77RR
DC-777
2 video outputs *2
(both identical)
1 video outputs
×
×
External sync input

Loop-through output
×
Clock output
×



WEN output


TRIG input


×
*1 Outputs video signals from the 4th pins and the 9th pins of the
camera individually.
(Only in cases of the XC-7500/8500CE (Discontinued model)).
*2 Video output from pin no. 4 is output from two BNC connectors via
two buffer amps.
* The production of underlined models is discontinued.
×
×
×
×
×
XC Series Camera Input/Output Chart for DC-700
Connector
12-pin connector pin no.
XCL-S900/S900C
XCL-S600/S600C
XCL-C500/C500C
XCL-C280/C280C
XCL-C130/C130C
XCL-C32/C32C
XCL-C30/C30C
XCL-5005/5005CR
XCL-U100
XCG-5005E/5005CR
XCG-U100E/U100CR
XCG-SX99E
XCG-SX97E
XCG-V60E
XCD-MV6
XCD-U100/U100CR
XCD-SX90/SX90CR
XCD-V60/V60CR
XC-HR90
XC-HR70
XC-HR50/HR57
XC-HR58
XC-56/56BB
XC-ST Series
XC-E Series
VIDEO 1
No.4
GPI 1/GPO 1 *
VIDEO 2
No.9
GPO 4
(ISO)
HD
No.6
GPO 2
(ISO +)
GPO 1
GPO 3
×
VD/SYNC
No.7
TRIG
No.11
GPI 3/GPO 3 *
WEN
No.10
GPO 4
(ISO +)
GPO 2
GPI 3
GPI 2
GPI 1 *
×
×
×
GPO *
TRIG
*Selectable from GND/DVAL output/
Exposure output
Multi Function
Out (TTL) *
×
Multi Function
Out (ISO) *
GPI In (ISO)
×
TRIG
*Selectable from Exposure output/
Strobe control outputs/GPO
Strobe OUT
GPO 2
GPO 1
GPI 2
GPI 1
TRIG
Strobe OUT
GPO 2
GPO 1
GPI 2
GPI 1
TRIG
GPI 2
Video output
×*
HD
VD
WEN
TRIG
Video output
×
HD
VD
WEN
TRIG
Video output
Video output
Video output
TRIG
×
×
HD
HD
HD
VD
VD/VS
VD
×
WEN
WEN
×
TRIG
TRIG
Remarks
*Factory setting: Input
*Factory setting: TRIG IN
Color Camera Block
FCB-4K
FCB-HD
FCB-SD
S-video output
Accessories
DC-700
Video output
*Not available on RS-232C control
Note
DC-700 do not support connecting to RS-232C of XC-HR90, XC-505 and XC-555 (Discontinued model).
Accessory
87
Cables
Lens Accessories
XCL
When a C-mount type lens is attached, a C-mount adaptor
(LO-999CMT) is required.
LO-999CMT
■■Camera cable (for XC series)
This 12-pin camera cable is used for connecting an XC
camera to a DC-700/700CE camera adaptor or JB-77
junction box.
CCXC-12P02N
12P05N
12P10N
12P25N
XCG
Digital Video Camera
■■C-mount adaptor
(2 m)
(5 m)
(10 m)
(25 m)
(Aspect
(Aspect
(Aspect
(Aspect
of
of
of
of
connector:
connector:
connector:
connector:
straight)
straight)
straight)
straight)
(12M)
XC (Non-TV Format)
5.526
2 m/5 m/10 m/25 m
M17x0.75
Unit: mm
14ø
Unit: mm
Be sure that the lens does not project more than 4.1 mm from the
lens mount.
Lens mount shoulder
4.1 mm or less
For setting the camera when using C-mount adaptor, fix the lens
mount (C-mount) instead of fixing the camera head in order to avoid
applying unnecessary forces to the camera head.
■■Connectors
PC-XC12
45.3
■■Junction Box
(12F)
ø14.2
This junction box enables simple conversion from 12-pin
camera cable to BNC. Also, 12 V DC can be supplied from
general-purpose power supply to the junction box’s power
terminal.
Unit: mm
76
JB-77
84
••12-pin/female
Unit: mm
* TRIG input terminal when using XC-56 and XC-56BB.
••Camera cable connection
(12-pin x 1)
••Video OUT (BNC x 1)
••Clock OUT (BNC x 1)
••VD IN/OUT (BNC x 1)
••HD IN/OUT (BNC x 1)
<Supplied accessories>
••Mount Blankets (2)
••Screw (4)
88
Connectors
Junction Box
40
Color Camera Block
FCB-SD
FCB-HD
FCB-4K
Accessories
Avoid using C-mount adaptor in the places where vibrations or
shocks are applied often. Doing so will damage the equipment or
loosen the connection.
••Camera connection (12-pin/female) ⇔ DC-700 (JB-77)
connection (12-pin/male)
••Shielded
Accessory
ø6
ø29
ø17.4
1"-32UNC
4
XC (TV Format)
Analog Video Camera
ø6.5
ø15
12 g
ø15
(12F)
Mass
Tripod Adaptor
■■Tripod Adaptor
VCT-333I
XCG
••Material: ABS
resin
••Insulated type
27
22
1/4-20 UNC
2.5
6
4-ø 2.4
Unit: mm
VCT-55I
XC (TV Format)
••Material: ABS
resin
••Insulated type
Analog Video Camera
XC (Non-TV Format)
18
12
Digital Video Camera
XCL
Use these adaptors to mount a camera on a tripod. Use
the included screws to attach the adaptor to the camera.
The adaptors are threaded for commercially available
tripods.
2-M3
27
2-ø4.5
51.5
Accessories
44.5
42
28
1/4-20 UNC
2-ø3.5
20
6
3.1x4
2.5
Unit: mm
Color Camera Block
FCB-4K
FCB-HD
FCB-SD
VCT-ST70I
••Material: ABS
resin
••Insulated type
26
25
ø3
ø2
59
25
28
50
1/4-20 UNC
2-ø2.7
2x3
ø6
2-ø4
3x4
6
2.5
40
Unit: mm
Accessory
89
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising