USER GUIDE

USER GUIDE
Statement
Copyright @ 2002-2013 Optical Network Video Technologies (Shenzhen) Co., Ltd
All Rights Reserved
This document contains proprietary information that is protected by copyright. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of Optical Network Video Technologies (Shenzhen) Co., Ltd.
USER GUIDE
®
is the registered trademark of Optical Network Video Technologies (Shenzhen) Co., Ltd. The information
and product specifications within this document are subject to change at any time, without notice and without obligation to notify any person of such change.
PoE & Optical Transmission
10/100M Ethernet PoE Switch
Packing List
Please kindly check the following items:
1 PoE switch
1 Power Adapter
2 Mounting Kits
1 User Guide/Conformity Certificate/Warranty Card
Note
!
If any shortage or damage found, please contact us in time.
Technical Structure and Port Description
Product overview
Product Introduction
10/100M unmanaged PoE switch can provide both 10/100M Ethernet data and Power over network cable, it
can be used as Ethernet Power Sourcing Equipment, it can automatically detect and identify whether connected
devices such as IP camera comply with standard IEEE PoE 802.3af, 802.3at and supply power for them. 10/100M
unmanaged PoE switch easier the deployment of Wireless AP, IP camera and IP-based network equipment.
4 Port 10/100M PoE Switch
89mm
89mm
114mm
4
3
2
1
Link
Link
Link
38mm
UPLINK
POE
184mm
118mm
4
3
2
1
FIBER
PWR
POE
118mm
4
3
2
1
4
3
2
1
Note
4
Power Over Ethernat PoE Switch
POE Switch
UPLINK
PWR
POE
3
10/100M PoE Sw itc h
25mm
POE Switch
2
1
4
3
2
1
25mm
PoE Technology is Power over Ethernet technology, It is refering to transfer both Ethenet data and and DC Power at the same time for IP Phone,
Wilress AP, IP-based camera. These devices which receive DC power is called Powered Device(PD).
!
4 Port 10/100M PoE Switch with
Built-in Power Supply
4 Port 10/100M PoE Fiber Switch
B
A
B
A
UPLINK
B
A
UP LINK
FIBER
POWER
The product ‘Switch’ mentioned in the manual, if without a special request, it is refering to 10/100M unmanaged PoE switch, PoE switch in short in below.
c
POWER
C
C
AC 220V 50Hz
A. 4 PoE Ports B. Up-link RJ45 Port C. Power Supply: DC 48V
A. 4 PoE Ports B. Up-link Fiber Port C. Power Supply: DC 48V Input
Feature
Comply to IEEE802.3, IEEE802.3u, IEEE802.3af, IEEE802.3at.
8 Port 10/100M PoE Switch
A. 4 PoE Ports B. Up-link RJ45 Port C. Power Supply: AC 100~245V, 50Hz
8 Port 10/100M PoE Switch with
Built-in Power Supply
8 Port 10/100M PoE Fiber Switch
10/100M self-adaptive, down link port support PoE.
All the ports support Auto MDI/MDIX.
102mm
2
1
3
4
5
6
7
8
28mm
Link
PWR
POE
1
2
3
4
5
LED indicator monitor working status and help fault detection
4
5
6
7
Link
PWR
POE
6
7
8
1
B
A
UPLINK
2
3
4
5
4
8
7
6
5
Power Over Ethernat PoE Switch
Link
28mm
POE Switch
UPLINK
3
2
10/100M PoE Sw itc h
8
279mm
6
7
8
B
A
PWR
1
2
3
4
5
6
7
8
B
A
FIBER
PWR
POWER
44mm
UPLINK
PWR
POE
FIBER
189mm
PWR
High perfermance full load power configuration.
3
189mm
Support IEEE802.3x Full Duplex flow control and Duplex backpressure flow control fuction
1K MAC Address
1.6G Broadband and 96Kb forwarding memory.
2
1
POE Switch
Comptible with Powered device applied to IEEE802.3af
Automatic MAC address learning and aging.
195mm
102mm
1
Each PoE port support Power up to 15.4Watts(IEEE802.3af), 30Watts(IEEE802.3at)
UPLINK
POWER
C
C
c
AC 220V 50Hz
A. 8 PoE Ports B. Up-link RJ45 Port C. Power Supply: DC 48V Input
A. 8 PoE Ports B Up-link Fiber Port C. Power Supply: DC 48V Input
A. 8 PoE Ports B. Up-link RJ45 Port C. Power Supply: AC100~245V, 50Hz
Connection Diagram
Indicator description:
r
M
on
ito
r
t.5
IN
PoE
N
RU
U
PL
K
OF
F:1
:5V
ON
IN
2V
PD
r Eth
ern
et
Sp
litt
er
Eth
ern
et
OUT
Ca
(P t.5
OE ne
tra two
ns
r
m k ca
iss
b
io le
n)
out
DC
N
RU
DC
T
OU
er
vic
e
m
De
Ca
red
DC
IP
we
Ca
ne t.5
ca two
rk
bl
e
Note
Installation guide
te
PoE
Po
PD E Sp
31 lit
01 ter
Connected 10M or 100M device
Not connected device
Priority: this function will protect device when it is overload, if all PD consumption are higher than specified,
switch port will be sorted by priority, port1, port2, port3, port N then power supply of lowest priority will be off.
Power port, Power adapter: please use 48V power supply, the switch will be damaged if use mismatched power
supply; Please input AC110-245V\50Hz for internal power supply switch.
PoE port: The PoE ports include PoE function, it can transmit power and data when connected matching device,
you can estimate the working status of each port on front panel LED.
Ethernet Port: Except PoE port, other port are Ethernet RJ45 port, all port support Auto MDIMDIX, plug and play,
also you can estimate the working status of each port on front panel LED.
ap
Ca
Not connected
Data transmission properly
Please confirm that the PD devices are complying with IEEE802.3af/at standard.
Ad
-Po
!
AC
Po
Po E S
E 3 wi
1 0 tc h
04
P
Short circuit or Current overload
No connected PD device or No power supply
Fiber port working properly
Fiber link were connected properly
IN
Link indicator Link
(Yellow LED)
Power off
Connected PD device, working properly
r ove
Fiber indicator: F
Description
Working
we
PoE indicator: PoE
(Green LED)
Status
ON
OFF
ON
Blink
OFF
Blink
ON
OFF
Blink
ON
OFF
Po
Indicator
Power indicator: P
OU
T
er
a
NV
R
Vi
de
ol
in
a
Po
EI
PC
am
Po
EI
PC
am
er
a
Po
EI
PC
am
er
a
Model description with details
Please install with the supporting devices.
ONV- POE31004P:5 port 10/100M POE switch, 1-4 port support POE, IEEE802.3af, single port power 15.4W,POE power budget 65W
transmission range 100M(built-in power supply version can be ordered)
Installation
ONV-POE31004P-at:5 port 10/100M POE switch,1-4 port support POE IEEE802.3at single port power 30W,POE power budget 110W
transmission range 100M(built-in power supply version can be ordered)
Please confirm the following things before installation:
1 If the POE port power meet the power requirement of the connecting devices.
2 If the POE standard requirement and power supply match with the power receiving device,
“1/2+、3/6-( End-span)/ 4/5+、7/8-( Mid-span).
3 If the output power of the supporting power adapter is consistent with the specification in the label of the POE switch.
Please install the POE switch according to the following steps:
1 Put the POE switch on the surface of a large and stable table.
2 Plug the power adapter into the power connector, and then connect the power outlet through the power cord.
3 Connect the network devices to the POE switch port though network cable.
!
Note
Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE
switch.Please cut off the power first before plugging the power adapter.
Power
Connect the power cord, plug it in, turn on the power. When turned on, the switch will automatically initialize, and
at this time the following cases will occur for the LED lights:
1 Except the POE port lights, all the other lights will be off after bright, which means the restoration is successful.
2 Power LED remains lit.
!
Note
If initialization is inconsistent with the above, please check the power.
e
ONV-POE31004PF:5 port POE switch,1-4 port support POE,IEEE802.3af,single port power 15.4W,POE power budget 65W, Ethernet transmission
range 100M,uplink port is single mode dual fiber SC interface(20km),(built-in power supply version can be ordered)
ONV-POE31004PF-at:5 port POE switch,1-4 port support POE,IEEE802.3at,single port power 30W,POE power budget 110W, Ethernet
transmission range 100M,uplink port is single mode dual fiber SC interface(20km),(built-in power supply version can be ordered
ONV-POE31004P-N:5 port 10/100M POE switch, 1-4 port support POE, IEEE802.3af, single port power 15.4W,POE power budget 65W
transmission range 100M
ONV-POE31804P: 9 port 10/100M POE switch ,1-4 port support POE,IEEE802.3af,single port power 15.4W,POE power budget 65W,
transmission range 100M(built-in power supply version can be ordered)
ONV-POE31804P-at: 9 port 10/100M POE switch ,1-4 port support POE,IEEE802.3at,single port power 30W,POE power budget 130W,
transmission range 100M(built-in power supply version can be ordered)
ONV-POE31804PF: 9 port 10/100M POE switch,1-4 port support POE,IEEE802.3af,single port power 15.4W,POE power budget 65W,Ethernet
transmission range 100M,uplink port is single mode dual fiber SC interface(20km)(built-in power supply version can be ordered)
ONV-POE31804PF-at: 9 port 10/100M POE switch,1-4 port support POE,IEEE802.3at,single port power 30W,POE power budget 130W,Ethernet
transmission range 100M,uplink port is single mode dual fiber SC interface(20km)(built-in power supply version can be ordered)
ONV-POE31008PS:9 port 10/100M POE switch,1-8 port support POE,IEEE802.3af,single port power 15.4W,POE power budget 110W,transmission
range 100M(built-in power supply version can be ordered)
ONV-POE31008P:9 port 10/100M POE switch,1-8 port support POE,IEEE802.3af,single port power 15.4W,POE power budget 130W,transmission
range 100M(built-in power supply version can be ordered)
ONV-POE31008PF: 9 port 10/100M POE switch,1-8 port support POE,IEEE802.3af,single port power 15.4W,POE power budget 130W,Ethernet
transmission range 100M,uplink port is single mode dual fiber SC interface(20km),(built-in power supply version can be ordered)
ONV-POE31008PN:9 port 10/100M POE switch,1-8 port support POE,IEEE802.3af,single port power 15.4W,POE power budget 130W,
transmission range 100M,built-in power supply.
ONV-POE31008PN-at:9 port 10/100M POE switch,1-8 port support POE,IEEE802.3at,single port power 30W,POE power budget 250W,
transmission range 100M,built-in power supply.
ONV-POE31008PF-at:9 port 10/100M POE switch,1-8 port support POE,IEEE802.3at,single port power 30W,POE power budget 250W,
transmission range 100M,uplink port is single mode dual fiber SC interface(20km),built-in power supply.
www.onvcom.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising