TP30D Manual - AM/FM Digital Tuner

TP30D Manual - AM/FM Digital Tuner
5020-01.qxd
3/9/01
9:20 AM
Page 1
Digital AM/FM Tuner
Model TP-30D
User’s Guide
54-5020-01
9609
Printed in Korea
5020-01.qxd
3/9/01
9:20 AM
Page 2
Specifications
Band Coverage . . . .
AM . . . . . . . . . . . .
FM . . . . . . . . . . . . .
Tuning . . . . . . . . . . .
Channel Indicator . . .
Station Tuning . . . . .
Pre-Set Memory . . . .
Memory Scan . . . . .
Antenna Connectors
Audio Output . . . . . .
Output Terminals . . .
Accessories Included
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.530 - 1620KHz
.87.5 - 107.5MHz
.PLL Synthesizer
.LCD Panel
.Pushbutton
.FM-18/AM-12
.Preset Stations
.FM - 75Ω, 300Ω, AM
.1V, Stereo Out
.RCA jacks
.AM Loop, FM Dipole,
Stereo Patch Cord,
Stereo to Mono Patch Cord
5020-01.qxd
3/9/01
9:20 AM
Page 3
Before You Begin
Your Bogen TP-30D Digital Tuner incorporates the
latest in PLL digital circuitry for reliable performance
for years to come. To get the maximum benefit from
your Bogen product, please read all instructional
materials provided with the unit.
Unpacking
The TP-30D is carefully checked before leaving the
factory. Inspect the shipping carton and unit for damage caused by improper handling. If damage is
found you must file a claim with the transportation
company that delivered the product.
WARNING
To Prevent Fire or Shock Hazard, Do Not
Expose This Appliance to Rain or Moisture.
Antenna Connection
FM Dipole Antenna
The indoor dipole antenna provided should be adequate for normal FM reception.
1. Connect the antenna leads to the two terminals
marked 300 OHM BAL.
2. Move the antenna around to determine the best
reception; tack it to a wall or baseboard, if possible.
5020-01.qxd
3/9/01
9:20 AM
Page 4
For reception where the unit is installed in a rack, an
external antenna installed in accordance with
National Electric Codes, is required.
1. Connect the external antenna leads to the 300
OHM BAL terminals.
For applications using coaxial cable, a 75 OHM
coaxial cable connector is provided.
AM Loopstick Antenna
The TP-30D is provided with an external AM antenna
for AM reception.
1. Carefully pull the antenna lead from the holding
notch in the antenna and unwind the lead from the
loop.
2. Connect the antenna leads to the terminals
marked AM ANT.
3. Fold the antenna so that it snaps into the base
forming a free-standing unit (see diagram).
4. Position the antenna for best reception. If desired,
the antenna may be permanently mounted using
screws through the two holes in the base.
Base
Lead
5020-01.qxd
3/9/01
9:20 AM
Page 5
Audio Connections
Two audio patch cords are provided to make audio
connections. One cord is a stereo patch cord (2
RCA plugs at each end) and one is a stereo-to-mono
cord (2 connectors at one end, 1 connector at the
other end).
1. Connect the two plugs from one end of either cord
to the R and L OUTPUT terminals on the TP-30D.
2. Connect the other end of the cable to the highlevel input (AUX, HI-Z TUNER) of an audio preamplifier.
Operation
Power
Press the front panel POWER switch to apply power.
Adjust the volume to the appropriate level using the
amplifier volume controls.
To Select a Band
Press the button marked BAND. The current band
appears on the display: FM1, FM2, FM3, AM1 or
AM2.
You can preset up to six stations on each band for a
total of 30 preset stations (18 FM and 12 AM).
To Tune a Station
Press the UP or DOWN buttons.
5020-01.qxd
3/9/01
9:20 AM
Page 6
To Preset Stations
1. Select a band and tune the first desired station.
2. Press the ME button and then one of the “M” buttons; for example, M1. (The preset number
appears on the display as: CH1.)
3. Tune the next station, press ME and the M2 button, etc., for the 2nd through 6th preset.
To Scan Preset Stations
1. Select a band. The first preset station (CH1) will
appear on the display.
2. Press the button marked MSCAN. Each preset
station will play for a few moments in turn while
scanning.
3. To select a station during scanning, press the “M”
button that corresponds to the CH number on the
display.
5020-01.qxd
3/9/01
9:20 AM
Page 7
Maintenance
CAUTION
There are no user serviceable parts within the
tuner. To avoid an electric shock hazard, refer
all internal servicing to qualified service personnel only.
The warranty will become void if repairs are
made by other than the Bogen Factory Service
Center.
We are interested in the maintenance of your Bogen
equipment. In the event of any difficulty, do not hesitate to ask our advice or assistance. Information
may be obtained by writing to the Service
Department, Bogen Communications, Inc., P.O. Box
575, Ramsey, NJ 07446.
When communicating with us, please give the model
number of your unit. Describe the difficulty encountered and include details on the electrical connections to associated equipment.
For warranty and repair information, please refer to
the warranty registration card included with the unit.
5020-01.qxd
3/9/01
9:20 AM
Page 8
50 Spring Street, Ramsey, NJ 07446
(201) 934-8500 Fax: (201) 934-9832
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising