ACP-4000
ACP-4000
Quiet 4U Rackmount Chassis with
Visual & Audible Alarm Notification
Features
ƒƒ Supports either an ATX motherboard or a PICMG backplane with up to 15
slots
ƒƒ Shock-resistant disk drive bay design holds up to three 5.25" and one 3.5"
disk drives
ƒƒ Front LED indicators and audible alarm notification for system fault detection
ƒƒ Low noise system fans with fan speed control
ƒƒ Built-in Intelligent System Module enables whole system fan control and
remote manageability
RoHS
COMPLIANT
2002/95/EC
Specifications
Front-accessible
1
3
2 (12 cm / 85 CFM each)
Cooling
Yes
2
Front I/O Interface
1
Power, HDD, temperature, fan, and power voltage status
Remote monitoring & alarm message Note 1: CPU/System fan speed, CPU/System temperature, motherboard voltage
Remote Management
Remote control Note 2: Power on/off, iKVM
Miscellaneous
Advanced functions Note 3: System recovery, system protection
Backplane version: One 9-pin D-Sub opening
Rear Panel
Motherboard version: Five 9-pin D-Sub & one 68-pin SCSI openings
Operating
Non-Operating
Temperature
0 ~ 40° C (32 ~ 104° F)
-20 ~ 60° C (-4 ~ 140° F)
Environment
Humidity
10 ~ 85% @ 40° C, non-condensing
10 ~ 95% @ 40° C, non-condensing
Vibration (5 ~ 500 Hz)
1 Grms
2G
Shock
10 G (with 11 ms duration, half sine wave)
30 G
Dimensions (W x H x D) 482 x 177 x 479 mm (19" x 7" x 18.9")
Physical Characteristics
Weight
15.2 kg (33.5 lb)
Note 1: Advantech motherboards with I2C interface H/W monitor and SUSIAccess 2.1.1122 (P/N: 968EMLSAP2) or later version are required to enable full functions.
Note 2: Advantech motherboards with iAMT technology and SUSIAccess 2.1.1122 (P/N: 968EMLSAP2) or later version are required to enable full functions.
Note 3: SUSIAccess 2.1.1122 (P/N: 968EMLSAP2) or later version is required to enable these functions.
Drive Bay
3.5"
5.25"
Fan
Air Filter
USB
PS/2
LED Indicators
Front View
Three 5.25" drive bays
(DVD ROM & disk trays
are not included)
System reset button
Alarm reset button
Two 85 CFM
cooling fans
One 3.5"
drive bay
USB
PS/2 keyboard
connector
Power switch
Industrial Computer Chassis
All product specifications are subject to change without notice
Last updated : 31-Dec-2013
ACP-4000
Dimensions
MB
468.0 [18.43]
482.1 [18.98]
426.0 [16.77]
Unit: mm [inch]
BP
101.6
[4.00]
177.0 [6.97]
523.1 [20.59]
86.4
[3.40]
172.7
[6.80]
478.6 [18.84]
Ordering Information
98.0
[3.86]
Part Number
1700006915
1700006917
IDT-3120E and
9892200013E
IDT-5230E
Power Supply Options
(For detailed power supply specs, please refer to Chapter 13)
PS8-300ATX-ZBE (ATX, PFC)
PS8-400ATX-ZE (ATX, PFC)
PS8-500ATX-ZE
RPS-300ATX-ZE (ATX, PFC)
(1+1 redundant)
1757004393-01 (ATX, PFC)
(1+1 redundant)
PS-300ATX-DC48E (ATX)
92.0 92.0
[3.62] [3.62]
Optional Accessories
Part Number
Power Supply
Backplane Version
ACP-4000BP-00CE
Without power supply, with ATX switch
ACP-4000BP-30CE
PS8-300ATX-ZBE
Motherboard Version
ACP-4000MB-00CE
Without power supply, with ATX switch
ACP-4000MB-30CE
PS8-300ATX-ZBE
Part Number
92.0
[3.62]
Watts
300W
400W
500W
Specifications
Input
AC 100 ~ 240 V (full range)
AC 100 ~ 240 V (full range)
AC 100 ~ 240 V (full range)
300W
AC 100 ~ 240 V (full range)
500W
AC 100 ~ 240 V (full range)
300W
DC -48 V
Description
ATX 24P/20P + 4P + 8P 60cm cable (connecting from power
supply to alarm board)
Two Mini DIN (connect to MB) / 6P (connect to front I/O
board) PS2 KB/Mouse cable
Mobile rack for converting a 5.25" drive bay to dual 2.5"
SATA HDD trays
Mobile rack for converting dual 5.25" drive bays to three
3.5" SAS/SATA HDD trays
* If users use AIMB-763 or 3rd party motherboard, they need to purchase 1700006915 or 1700006916
for the front voltage LEDs to function normally. And they also need to purchase 1700006917 to make
front PS/2 function normally.
* If users use ASMB-820 or ASMB-822, they need to purchase 1700006915 for the front voltage
LEDs to function normally.
Spare Parts
Part Number
2130006147S000
2130004803S000
Description
Door filter 97.6 x 36.6 x 5 mm
Fan filter 115 x 195 x 5 mm
Online Download www.advantech.com/products
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising