AIMB-785 LGA1151 Intel® Core™ i7/i5/i3 ATX with Triple Display

AIMB-785 LGA1151 Intel® Core™ i7/i5/i3 ATX with Triple Display
AIMB-785 LGA1151 Intel® Core™ i7/i5/i3 ATX with
Triple Display, DDR4, SATA III
Startup Manual
Specifications
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
• 1 AIMB-785 Startup Manual
• 1 Driver CD (user’s manual is included)
• 2 Serial ATA HDD data cables
• 1 Serial ATA HDD power cables
• 1 I/O port bracket
• 1 Warranty card
• 1 Startup manual
If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)
Standard Functions
• CPU: LGA1151 6th Generation Intel® Core™ i7/i5/i3/
Celeron/Pentium
• BIOS: AMI 128 Mb SPI BIOS
• Chipset: Intel® Q170 chipset
• System memory: Up to 64 GB with four 288-pin
DIMM sockets. Supports dual channel non-ECC DDR4
1866/2133
Note: Due to the inherent limitations of PC architecture, the
system may not fully detect 64 GB RAM when 64 GB RAM
is installed
• SATA interface: Six on-board Serial ATAIII connectors
support data transmission rate up to 600 MB/s. All six
SATAIII ports support Advanced Host Controller Interface
(AHCI) technology
• LPC interface: Advantech-designed LPC connector supports TPM module
• Serial ports: Six serial ports: COM1, COM2 and COM4 ~
6 are RS-232; COM3 is RS-232/422/485 with BIOS menu
options
• Parallel port: One parallel port, which supports SPP/
EPP/ECP modes
• Keyboard/mouse connector: Supports standard PS/2
keyboard and mouse
• Watchdog timer: 255 sec timer level intervals
• USB 3.0/2.0: Thirteen USB ports: 1/2/3/4/13/14 are
USB3.0; others are USB2.0
Graphic Interface
• Chipset: CPU integrated graphics controller
• Display Memory: 1 GB maximum shared memory with 2
GB and above system memory installed
• Resolution: Supports DVI up to 1920 x 1200 resolution@
60 Hz refresh rate
Supports VGA up to 1920 x 1200 resolution @ 60 Hz
refresh rate
Ethernet interface
For more information on this and other Advantech
products, please visit our website at:
• Interface: 10/100/1000 Mbps
• Controller: LAN1: Intel® I219LM; LAN2: Intel® I211AT
http://www.advantech.com
Mechanical and Environmental
http://www.advantech.com/eplatform
• Dimensions (L x W): 304.8 x 244 mm (12” x 9.6”)
• Power supply voltage: +3.3 V, +5 V, +12 V, +5 Vsb
• Power Consumption:
Intel Core Intel I7-6700 3.4 GHz; DDR4 8 G x 4
Maximum: +3.3 V at 1.02 A, +5 V at 1.96 A, +12 V at 1.14
A, +5 Vsb at 0.08 A, -5 V at 0.03 A, -12 V at 0.06 A
• Operating temperature: 0 ~ 60° C (depending on CPU)
• Weight: 0.5 kg (weight of board)
For technical support and service, please visit our
support website at:
http://www.advantech.com/support
This manual is for the AIMB-785 series Rev. A1.
Part No. 2001078510
Printed in China
1st Edition
Spetember 2015
AIMB-785 Startup Manual 1
Jumpers and Connectors
The board has a number of jumpers that allow you to configure your system to suit your application. The table below
lists the function of each jumper and connector.
Jumpers and Connectors (Cont.)
USB910
USB port 9, 10
USB11
USB11 (Type A)
Connector / Jumper List
USB1314
USB3.0 13, 14
Label
Function
SATA1
Serial ATA1
JWDT1
Watchdog Reset
SATA2
Serial ATA2
LPC1
Low pin count connector for Advantech
designed LPC modules
SATA3
Serial ATA3
SATA4
Serial ATA4
SATA5
Serial ATA5
SATA6
Serial ATA6
ATX12V1
ATX 12V Auxiliary power connector
(for CPU)
EATXPWR1
ATX 24 Pin Main power connector
(for System)
SPDIF_OUT1
Digital audio output pin header
SPI_CN1
SPI flash card pin header
JCMOS1
CMOS clear
LPT1
Parallel port supports SPP/ EPP/ECP
mode
LAN1_USB12
LAN1 / USB 3.0 port 1, 2
LAN2_USB34
LAN2 / USB3.0 port 3, 4
VGA1+COM1
VGA connector / COM connector
DVI1+DVI2
Dual DVI-D connectors
COM1
COM2
COM4
COM5
COM6
Serial port: RS-232
COM3
Serial port: COM3; RS-232/422/485
(9-pin connector)
JME1
Intel ME Enable/Disable jumper
KBMS1
Keyboard and Mouse PS/2 connector
(6-pin)
JPCICLK1
PCI Clock selection
(1-2): 66 MHz
(2-3): 33 MHz (default)
Keyboard Lock and Power/Sleep LED
Suspend: Fast flash (ATX/ AT)
System On: ON (ATX/ AT)
System Off: OFF (AT/ATX)
JUSB_1
JFP3
USB power source switch between +5V
and +5V_ DUAL for Rear USB ports
JUSB_2
USB power source switch between +5V
and +5V_ DUAL for On Board USB
ports
GPIO1
8 bit digital I/O connector
SMBUS1
SMBus connector
JFP2
External speaker / HDD LED connector
SNMP / SM Bus connector
JFP1
Power Switch / Reset connector
JCASE1
Case Open connector
PSON1
AT(1-2) / ATX(2-3) mode selector
JCMOS1: CMOS and ME clear function
VOLT1
Alarm Board Power connector
Pins
Result
JOBS1
Close: Enable OBS Alarm
Open: Disable OBS Alarm
1-2
Keep CMOS data*
CPUFAN1
CPU FAN connector (4-pin)
2-3
Clear CMOS data
SYSFAN1
System FAN power connector (3-pin)
SYSFAN2
System FAN power connector (3-pin)
LANLED1
Front Panel LAN indicator connector
AUDIO1
AUDIO2
Audio connector (Line-out, Mic-In)
FPAUD1
Front Panel Audio pin header
USB56
USB port 5, 6
USB78
USB port 7, 8
2 AIMB-785 Startup Manual
* Default
1
2
3
*Keep CMOS data
1
2
3
Clear CMOS data
Jumpers and Connectors (Cont.)
The CD disc contains a driver installer program that will
lead you through the installation of various device drivers
needed to take full advantage of your motherboard.
JWDT1: Watchdog timer output option
Closed Pins
Result
2-4
NC
4-6
System reset*
Software Installation
Caution! The computer is supplied with a battery-powered
realtime clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries according to manufacturer’s instructions.
* Default
Declaration of Conformity
NC 2-4 Closed
*System Reset 4-6 Closed
PSON1: ATX, AT mode selector
Closed Pins
Result
1-2
AT Mode
2-3
ATX Mode*
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired operation.
* Default
1
2
1
3
AT Mode 1-2 closed
2
3
*ATX Mode 2-3 closed
JUSB
Closed Pins
Result
1-2
*USB +5V_DUAL Power
2-3
USB +5V Power
* Default
1
2
3
*USB +5 V_DUAL Power
1
2
3
USB +5 V Power
AIMB-785 Startup Manual 3
Board Layout
JFP1+JFP2
JFP3
SMBUS1
JIR1+JWDT1+JOBS1
SYSFAN1
VOLT1
SATA0 SATA2 SATA4
SATA1 SATA3 SATA5
Q170
JCASE1
PSON1
EATXPWR1 SPI_CN1
JCASEOP_SW1
GPIO1
LPT1
COM3
LPC1
COM4 COM2
DIMM B2
DIMM B1
DIMM A2
DIMM A1
COM5 USB910
COM6
USB56
USB1314
USB11
JUSB_2
JCMOS1
JME1
CPUFAN1
CPU1
JPCICLK1
PCI3
SYSFAN2
PCI2
PCI1
ATX12V2
KBMS1
FPAUD1
USB78
DVI1+DVI2
VGA1+COM1
LAN1_USB12
3
6
9
12
PWRSW
RESET
5
4
8
7
11
10
HDDLED
SNMP
SM_BUS
JFP2
2
1
JFP3
1
2
3
4
JFP1
&
AUDIO1
AUDIO2
LAN2_USB34
PCIe x4 PCIe x4
LANLED1
PCIe x4
SPDIF_OUT1
PCIe x16
SPEAKER
5
PWRLED & KEYLOCK
Figure 1: Board Layout: Jumper and Connector Locations
4 AIMB-785 Startup Manual
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising