i208-i Line Array
i208-i Line Array
Applications
Live Sound Reinforcement
Theaters
Cruise Ships
Houses of Worship
Entertainment Venues
Cinema
Features
Compact Size
High Output
Modular High Frequency
LF Device: (1) 8 in. (203.2mm)
LF/MF Device: (1) 8 in. (203.2mm)
HF Device: (1) Exit: 1.4 in. (35.6mm)
Voice Coil Diam: 3.0 in. (76.2mm)
Integral Bimodal Rigging
EP-8 Connector
General
Description
GENERAL DESCRIPTION
The i208-i is the latest innovation in compact
line array technology from Clair Brothers. The
i208-i incorporates a proven approach to low/
mid frequency symmetry first introduced in the
Clair Brothers CAT™ system.
coverage angle adjustments for multiple venue
arrangements. Rear rigging hardware allows for
angle adjustments between 0 and 10 degrees at
0, 2.5, 5, 7.5 or 10 degree increments.
As with all Clair Brothers products, the i208-i is
The centrally positioned high frequency constructed of the finest Baltic birch plywood
waveguide couples to a modular horizontal and finished with a rugged exterior epoxy to
waveguide providing optimum custom tailoring withstand the most demanding conditions.
for horizontal dispersion. Standard module is The speaker grille is constructed of high-grade
120 degrees and 90 degrees is optional. This 14 gauge perforated steel and finished with a
modular section is flanked by the low frequency commercial grade powder coat finish.
and low/mid frequency components. Each 8
inch low and low/mid frequency driver is front
Options & Accessories
loaded in its own tuned reflex chamber.
i208-WR – Weather Resistant Model
The i208-i speaker cabinet is designed to provide
exceptional intelligibility and is capable of a i208-M – Mobile Model
Accessories:Ground Stack Rigging
frequency response of 60Hz–20kHz.
Soft Cover and Dolly Transport
The i208-i has one of the most versatile, quick and Custom Colors Available
easy to use rigging systems in the industry today.
Each enclosure is equipped with structurally
integrated bimodal rigging to allow for quick
Call or e-mail Clair Brothers for more information on available options.
(717-665-4000) e-mail: sales@clairbrothers.com
i208-i Line Array
AUDIO SPECIFICATIONS
Loudspeaker Type
Line Array Element Three-Way Active
Frequency Response (+/- 3dB) Single Cabinet
Recommended Power Amplifier
Sensitivity (1 Watt @ 1 Meter)*
Maximum Output
Cont
Peak
Drivers
LF
LF/MF
HF
Nominal Impedance
LF
LF/MF
HF
Power Handling
Program
Peak
Dispersion
Standard
Optional
Input Connection
60Hz–20kHz
1000–1300W @ 8 Ohms
103 dB SPL
129 dB SPL
132 dB SPL
(1) 8 in. (203.2mm)
(1) 8 in. (203.2mm)
(1) Exit 1.4 in. (35.6mm); VC diameter 3.0 in. (76.2mm)
8 Ohms
8 Ohms
16 Ohms
(LF) 400W; (LF/MF) 400W; (HF) 220W
(LF) 800W; (LF/MF) 800W; (HF) 440W
120° H x 10° V
90° H x 10° V
(2) EP-8 Connectors (1 Male, 1 Female)
733.2
28.87
MECHANICAL SPECIFICATIONS
Enclosure
Shell
Finish
Grille
Dimensions
Front Height
Rear Height
Width
Depth
Weight
Shipping Weight
18mm Baltic Birch
Black Epoxy Mastic
Perforated Steel, Foam Backed
9.16 in. (232.5mm)
5.62 in. (142.7mm)
28.87 in. (733.2mm)
23.88 in. (606.5mm)
62 lbs. (28.1kg)
71 lbs. (32.2kg)
*Sensitivity: Measured with recommended signal processing using constant voltage input of 2.83Vms, normalized to 1m. This
figure represents the average sensitivity as a function of frequency for the entire three-way system.
232.5
9.16
10°
606.5
23.88
i208-i EP-8 Pin Configuration
PinUse
PinUse
1 Low (−)
5
High (−)
2
Low (+)
6
High (+)
3 Low/Mid (−)
7
Unused
4
Low/Mid (+)
8
Unused
Note: All wattage figures are calculated using the rated nominal impedance.
Clair Brothers products are designed to perform optimally by utilizing factory recommended proprietary DSP settings.
ARCHITECT AND ENGINEER SPECIFICATIONS
The loudspeaker shall be a three-way active, line-array component cabinet. The front of the enclosure shall be fitted with a 14 gauge
perforated steel grille backed with foam. The system shall have an amplitude response of 60Hz to 20kHz (+/−3 dB). The loudspeaker
system shall be symmetrically loaded with two 8” low/midrange transducers. The low frequency drivers shall be 8” nominal diameter
capable of handling 300W of power as per AES standard. The low and low mid frequency drivers shall each be mounted in independently
tuned vented chambers. The high frequency section shall be modular with each module containing (1) HF waveguide. The high frequency
horn shall be centrally located within the enclosure and shall feature (1) 1.4“ exit / 3” voice coil diameter compression driver mounted
to a waveguide and horn assembly that provides either 120° standard (or 90° optional) horizontal by 10° vertical dispersion. The rigging
shall be integrated to the enclosure structure and shall permit the deployment of the cabinet into typical line-array configurations. The
loudspeaker enclosure shall be constructed of 18mm / 13-ply Baltic birch plywood. The cabinet shall be finished using epoxy mastic
finish. The loudspeaker shall be 9.16” H (front), 5.62” H (rear) x 23.88” D x 28.87” W and weigh 62 lbs. (28.1kg). The loudspeaker
system shall be the Clair Brothers i208-i.
CLAIR BROTHERS • ONE CLAIR BOULEVARD • MANHEIM, PA 17545 • 717-665-4000 • WWW.CLAIRBROTHERS.COM
CBAS20150225
Due to constant research, development and improvements all specifications are subject to change without notice.
Made in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising