dintek - Systech On
DINTEK
Tools
LAN Cabling Systems
RJ45 Crimping Tool
P/N
Description
Std Pkg Qty
6102-01002
Crimping for RJ12(6P) and
RJ45(8P) plug,suitable for solid
and stranded wire used.
1
6102-01004
The modular crimping tools to install
modular 8 keyed wire plugs on cordage
For RJ45(8P) shielded plug used only.
1
UTP Cables Stripper
P/N
6101-01001
Description
Turning 3 circles to extract the
jacket of UTP cable, Dual function
of stripper and 110 tool
Std Pkg Qty
1
110 Punch Down Tool
P/N
Description
6103-01001
For seating wires into connecting blocks,
and cuts off wire end after termination
Std Pkg Qty
1
5 Pairs 110 Impact Tool
P/N
6103-04001
Description
Seating wire onto terminal block and
cut off wire end after termination,
Used for 110 type I.D.C. blocks
Std Pkg Qty
1
Insertion Tool
P/N
Description
Std Pkg Qty
6107-00001
For seating wires onto telecom blocks
and cut off wire end after termination
1
6107-00006
Insertion tool with sensor for modules
1
www.dintek.com.tw
63
DINTEK
Tools
LAN Cabling Systems
LAN Maintenance Tool Kit
P/N
6106-01003
Description
8P/6P crimping tool x 1
Cable cutter x 1
Cable stripper x 1
Punch down tool x 1
Boot x 20
6P4C plug x 30
8P8C plug x 30
UTP Twin tester x 1
Std Pkg Qty
1
Professional Fiber Tool Kit
P/N
NEW
6106-02003
64
Description
Std Pkg Qty
200x Microscope x 1
Light pen x 1
Syringe x 1
Carbide scribe x 1
Stripper x 1
1
A/B fast epoxy glue x 1
ST & SC polish disc x 1
Glass working pad x 1
Wipe paper x 3
Kevlar cutter x 1
Crimp tool x 1
Cleanser x 1
Rubber working pad x 1
6um/1um/0.05um diamond polish film x 1
www.dintek.com.tw
DINTEK
Tools
LAN Cabling Systems
Twin Tester
The DINTEK twin tester provides instant identification of most common voice and data cabling problems
including shorts, opens, reversals, and incorrect polarity.
The master and remote units separate for end-to-end testing of installed cabling or work sparatelly as 2
patch cord test unit. Both pieces simply snap and lock together when not in use, making it easy to carry
and store.Designed to fit neatly into a toolbox or pocket, the UTP tester has a convenient ‘ring’ feature for
attaching to a belt of frame. The UTP tester should be used to check each channel from the station device
to the system.



Innovative 2-in-1 design features modular jacks for testing USOC and 568A/B cabling systems
Accurately verifies the continuity and sequence of 1-,2-,3-, and 4-pair voice and data channels
Continuously-sequencing LED display provides a diagnostic readout that immediately detects
shorts, opens, reversals, and mis-wires at a glance




Simply snap and lock master and remote units together when not in use
Ergonomically designed hand-held unit is light weight, rugged, and impact-resistant
9 volt alkaline battery excluded
Carry case included
Technical specification:



Materials: ABS
Distance: 1,000m (3,280ft)
Power requirements: 9 volt
battery(standard or alkaline)



Weight: 240g (9 oz.)
Built-in interface: USOC,EIA 568B
Contact specification: 30 u” gold over nickel
Caution
Do not use on live circuits
P/N
Description
Std Ctn Qty
6201-03002
Twin Tester with Carry Bag
8
Function 1:
Function 2: End to End Test
Patch Cable Test
Tester Result:
Master LED on GREEN
LED on GREEN
LED on RED
2LEDs on GREEN/RED
LED off
www.dintek.com.tw
Remote
LED on GREEN
LED on RED
LED off
2LEDs on GREEN/RED
LED off
Tester Result
Good channel
Reversal
Short with in pair
Short between pairs
Open
65
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising