Untitled - Pasternack
LMR-240
TIMES MICROWAVE SYSTEMS
LMR -240
Flexible Low Loss Communications Coax
®
Ideal for…
•Jumper Assemblies in Wireless Communications Systems
•Short Antenna Feeder runs (e.g. WLL, GPS, LMR,
Mobile Antennas)
•Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax,
SCADA, Mobile Antennas) requiring an easily routed,
low loss RF cable
• LMR standard is a UV Resistant Polyethylene jacketed
cable designed for 20-year service outdoor use. The
bending and handling characteristics are significantly better
than air-dielectric and corrugated hard-line cables.
• LMR - DB is identical to standard LMR plus has the
advantage of being watertight. The addition of
waterproofing compound in and around the foil/braid
insures continuous reliable service should the jacket be
inadvertently damaged during installation or in the future.
• LMR - FR is a non-halogen (non-toxic), low smoke,
fire retardant cable designed for in-building runs that can
be routed anywhere except air handling plenums.
LMR-FR is UL/NEC & CSA rated‘CMR’ and ‘FT4’
respectively, meets FAA FAR25 requirements and is
MSHA-P for mining applications.
• LMR - FR-PVC is a general-purpose indoor cable
and has a UL/NEC & CSA rating of ‘CMR’ and ‘FT4’
respectively. It is less expensive than LMR-FR, however
it emits toxic fumes (HCL) and greater smoke density
when burned.
• LMR - PVC is designed for low loss general-purpose
applications and is somewhat more flexible
than the standard polyethylene jacketed LMR.
• LMR - PVC-W is a white-jacketed version of LMRPVC for marine and other applications
where color compatibility is desired.
• LMR - MA is a flexible cable designed specifically
for mobile antenna applications. It has a PVC jacket and
un-bonded aluminum tape to facilitate end stripping with
automated equipment.
®
®
®
®
®
®
• Low Loss is another hallmark feature of LMR-240.
Size for size LMR has the lowest loss of any flexible cable
and comparable loss to semirigid hard-line cables.
• RF Shielding is 50 dB greater than typical single
shielded coax (40 dB). The multi-ply bonded foil outer
conductor is rated conservatively at > 90 dB (i.e. >180
dB between two adjacent cables).
• Weatherability: LMR-240 cables designed for
outdoor exposure incorporate the best materials for UV
resistance and have life expectancy in excess of 20 years.
• Connectors: A wide variety of connectors are available
for LMR-240 cable, including all common interface types,
reverse polarity, and a choice of solder or non-solder
center pins. Most LMR connectors employ crimp outer
attachment using standard hex crimp sizes.
• Cable Assemblies: All LMR-240 cable types are
available as pre-terminated cable assemblies. Refer to
the section on FlexTech for further details.
Stock
Color Code
Black 54021
Black 54090
Black 54029
LMR-240-FR-PVC Indoor/Outdoor Riser CMR FRPVCBlack
54214
LMR-240-PVC General Purpose
PVC Black 54140
LMR-240-PVC-W General Purpose
PVC White 54202
LMR-240-MA
Indoor & Mobile Antenna PVC Black 54046
Part Number
Application
Jacket
LMR-240
Outdoor
PE
LMR-240-DB
Outdoor/Watertight
PE
LMR-240-FR Indoor/Outdoor Riser CMRFRPE
®
• Flexibility and bendability are hallmarks of the LMR240 cable design. The flexible outer conductor enables
the tightest bend radius available for any cable of similar
size and performance.
16
Part Description
Construction Specifications
Description
Inner Conductor
Dielectric
Outer Conductor
Overall Braid
Jacket
(800) TMS-COAX • www.timesmicrowave.com
Material
In.
(mm)
Solid BC
Foam PE
Aluminum Tape
Tinned Copper
(see table above)
0.056
0.150
0.155
0.178
0.240
(1.42)
(3.81)
(3.94)
(4.52)
(6.10)
Mechanical Specifications
Performance Property
US
in. (mm)
in. (mm)
ft-lb (N-m)
lb/ft (kg/m)
lb (kg)
lb/in. (kg/mm)
(metric)
0.75
(19.1)
2.5(63.5)
0.25
(0.34)
0.034
(0.05)
80
(36.3)
20
(0.36)
Environmental Specifications
Performance Property
Installation Temperature Range
Storage Temperature Range
Operating Temperature Range
F
-40/+185
-94/+185
-40/+185
0
C
-40/+85
-70/+85
-40/+85
o
Electrical Specifications
Performance Property
Units
US (metric)
Velocity of Propagation %
84
Dielectric Constant
NA
1.42
Time Delay
nS/ft (nS/m)
1.21 (3.97)
Impedance
ohms
50
Capacitance pF/ft (pF/m)
24.2 (79.4)
Inductance uH/ft (uH/m)
0.060 (0.20)
Shielding Effectiveness
dB
>90 DC Resistance
Inner Conductor
ohms/1000ft (/km)
3.2 (10.5)
Outer Conductor ohms/1000ft (/km) 3.89 (12.8)
Voltage Withstand Volts DC
1500
Jacket Spark
Volts RMS
5000
Peak Power kW
5.6
Attenuation vs. Frequency (typical)
100.0
Attenuation
Bend Radius: installation
Bend Radius: repeated
Bending Moment
Weight
Tensile Strength
Flat Plate Crush
(db per 100 feet)
Units
10.0
1.0
10
Frequency (MHz)
100 Frequency (MHz)
30
50
1,000
10,000
150 220 450 900 1500 18002000 25005800
Attenuation dB/100 ft 1.31.7 3.03.75.3 7.6 9.910.9
11.512.9
20.4 Attenuation dB/100 m
4.4 5.7 9.912.017.324.832.435.637.742.466.8 Avg. Power kW
1.491.15 0.660.540.38 0.26 0.20 0.180.17 0.150.10
(0.242080) •
Calculate Attenuation =
FMHz + (0.000330) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators)
Attenuation:
VSWR=1.0 ; Ambient = +25°C (77°F)
Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading
(800) TMS-COAX • www.timesmicrowave.com
17
LMR-240
TIMES MICROWAVE SYSTEMS
LMR-240
TIMES MICROWAVE SYSTEMS
LMR -240
Flexible Low Loss Communications Coax
®
3
2
1
EZ-240-NMH-X
3190-2893
TC-240-FM-X
3190-2891
5
6
TC-240-NMH-RA-D
3190-2426
7
9
10
TC-240-BM-X
3190-2890
14
13
Number
1. F Male
Straight Plug
TC-240-FM-X
2. N Male Straight Plug
EZ-240-NMH-X 3. N Male
Right Angle
4. N Male
Straight Plug
TC-240-NMH-X
5. N Male
Straight Plug
TC-240-NMC
EZ-240-1023M
EZ-240-TM-X
3190-2725
TC-240-TM-RA-D
3190-2798
16
EZ-240-QM-X
3190-2894
EZ-240-TM-RP-X
3190-2892
Connectors
Part
StockVSWR** Coupling Description
TC-240-NF-PM-X
3190-2889
TC-240-BM-RA-D
3190-2869
15
TC-240-TM-X
3190-2797
8
12
11
TC-240-BMC
3190-242
TC-240-NMH-X
3190-2887
TC-240-NF-BH-X
3190-2888
EZ-240-1023M
3190-2512
TC-240-NMC
3190-244
Interface
4
Code Freq.
(GHz) Nut
3190-2891 <1.25:1 (2.5)
Crimp
N/G
1.1 (28)
3190-2893 <1.25:1 (2.5) Hex/Knurl Spring Finger Crimp
A/G
1.5 (38.1) 0.78 (19.8) 0.086(39.0)
1.2 (32.4) 1.22 (31.0) 0.091 (41.7)
TC-240-NMH-RA-D 3190-2426 <1.35:1 (6)
Knurl
Inner Outer Finish*
Contact Contact BodyLengthWidthWeight
Attach Attach /Pin in
(mm) in(mm) lb (g)
Solder
0.45 (11.4) 0.014 (6.4)
Hex/Knurl
Solder
Crimp
A/G
3190-2887 <1.25:1 (2.5) Hex/Knurl
Solder
Crimp
N/S
1.5 (38)
0.75 (19.1) 0.086(39.0)
Solder
Clamp
S/G
1.5 (38)
0.75 (19.1) 0.082(37.2)
Spring Finger Crimp
#
3190-244 <1.25:1 (2.5)
Knurl
6. 1.0/2.3 DIN
Straight Plug
3190-2512 <1.35:1 (2.5)
knurl
N/G
1.1(228.5) 0.33 (8.5) 0.014 (6.63)
7. N Female
Bulkhead Jack TC-240-NF-BH-X
3190-2888 <1.25:1 (2.5)
NA
Solder
Crimp
A/G
1.7 (44)
8. N Female
Panel Mount
TC-240-NF-PM-X
3190-2889 <1.25:1 (6)
NA
Solder
Crimp
A/G
1.7 (44)
0.88 (22.2) 0.115(52.2)
9. BNC Male
Straight Plug
TC-240-BMC
Knurl
Solder
Clamp
S/G
1.7 (43)
0.56 (14.2) 0.040(18.1)
10. BNC Male
Straight Plug
TC-240-BM-X
0.58 (14.7) 0.043(19.5)
11. BNC Male
Straight Plug TC-240-BM-RA-D
#
3190-242 <1.25:1 (2.5)
0.88 (22.2) 0.115(52.2)
3190-2890 <1.25:1 (2.5)
Knurl
Solder
Crimp
A/G
1.3 (34)
3190-2869 <1.25:1 (2)
Knurl
Solder
Crimp
A/G
1.0 (25.1) 0.57 (14.5) 0.115 (52.0)
12. TNC Male Straight Plug
EZ-240-TM-X
3190-2725 <1.25:1 (2.5)
Knurl
13. TNC Male
Straight Plug
TC-240-TM-X
3190-2797 <1.25:1 (2.5)
Knurl
14. TNC Male
Reverse PolarityEZ-240-TM-RP-X 3190-2892 <1.25:1 (6)
Knurl
15. TNC Male Right Angle
TC-240-TM-RA-D
3190-2798 <1.25:1 (6)
Hex
16. QMA Male
Straight Plug
EZ-240-QM-X
3190-2894 <1.25: (6)
Knurl
Spring Finger Crimp
N/G
1.4 (34.3) 0.59 (15.0) 0.043 (19.5)
Crimp
N/G
1.7 (43)
0.59 (15.0) 0.043(19.5)
Spring Finger Crimp
A/G
1.4 (36)
0.59 (15.0) 0.043 (19.5)
Solder
Crimp
A/G
1.0 (25.1) 0.62 (15.7) 0.115 (52.0)
Spring Finger Crimp
Solder
N/G
1.2 (30.0) 0.41 (10.5) 0.014(6.35)
17. QMA Male
Right Angle
EZ-240-QM-RA-X
3190-2895 <1.25: (<6)
Knurl
Spring Finger Crimp
N/G
0.8 (20.3) 0.65 (16.5) 0.019(8.62)
18. SMA Male
Straight Plug
EZ-240-SM-X
3190-2897 <1:25: (6)
Hex
Spring Finger Crimp
N/G
1.0 (25.4) 0.32 (8.1) 0.016(7.26)
19. SMA Male
Straight Plug
TC-240-SM-SS-X
3190-2898 <1.25:1 (10)
Hex
Solder
Crimp
SS/G 1.0 (25)
0.32 (8.1) 0.016 (7.3)
20. SMA Male
Right Angle TC-240-SM-RA-SS-X 3190-2900 <1.35:1 (6)
Hex
Solder
Crimp
SS/G 0.8 (20)
0.65 (16.5) 0.019 (8.6)
21. SMA Male
Right Angle
3190-2899 <1.25:1 (6)
Hex
#
#
EZ-240-SM-RA-X
Spring Finger Crimp
A/G
0.9 (22.8) 0.31 (7.9) 0.019 (8.6)
22 . SMA Male
Reverse PolarityTC-240-SM-RP
3190-326 <1.25:1 (2.5)
Hex
Solder
Crimp
SS/G 1.0 (25)
23. SMA Female
Bulkhead Jack TC-240-SF-SS-BH-X3190-2896 <1.25:1 (2.5)
NA
Solder
Crimp
SS/G 1.1 (29)
0.31 (7.9) 0.019 (8.6)
24. Mini-UHF
Straight Plug
Knurl
Solder
Crimp
N/G
0.45 (11.4) 0.014 (6.4)
#
25. 7/16 Din Male Straight Plug
26. 7/16 Din Male
Right Angle
27. TNC Female
Straight Jack
18
TC-240-MUHF
3190-445 <1.25:1 (2.5)
TC-240-716M
3190-2982 <1.35:1 (3)
Hex
TC-240-716M-RA-D 3190-2983 <1.35:1 (3)
Hex
EZ-240-TF
3190-2552 <1.35:1 (6)
NA
Spring Finger Crimp
1.1 (28)
0.32 (8.1) 0.016 (7.3)
A/S
2.0 (50.5) 1.26 (32.0) 0.186 (84.4)
Crimp
A/S
1.4 (34.3) 1.60 (40.6) 0.239 (108.5)
Spring Finger Crimp
N/G
1.1 (27.0) 0.45 (11.4) 0.035 (15.9)
Solder
(800) TMS-COAX • www.timesmicrowave.com
17
19
18
EZ-240-QM-RA-X
3190-2895
21
EZ-240-SM-X
3190-2897
TC-240-SM-SS-X
3190-2898
TC-240-SM-RP
3190-326
EZ-240-SM-RA-X
3190-2899
26
TC-240-716M-RA-D
3190-2983
TC-240-SM-RA-SS-X
3190-2900
24
23
22
25
20
TC-240-SF-SS-BH-X
3190-2896
TC-240-MUHF
3190-445
27
EZ-240-TF
3190-2552
TC-240-716M
3190-2982
GK-S240TT
Type
Ground Kit
Hardware Accessories
Part
Number
GK-S240TT
Stock
Code
GK-S240TT
CCT-01
3190-1544
CT-240/200/195/100
3190-667
Type
Crimp Tool
Strip Tool
Deburr Tool
Cutting Tool
Replacement Blade
Replacement Blade Kit
Description
Standard Ground Kit (each)
RB-CST
3192-086
Install Tools
Part
Number
DBT-U
3192-001
Stock
Code
CST-240A
3192-152
Description
CT-240/200/195/100
CST-240A
DBT-U
CCT-01
3190-667
3192-152
3192-001
3190-1544
Crimp tool for LMR-100, 195, 200 and 240 connectors
Prep tool for LMR-240 connectors
Removes center conductor rough edges
Cable end flush cut tool
RB-01
RB-CST
3190-1609
3192-086
Replacement blade for cutting tool
Replacement blade kit for all CST strip tools
(800) TMS-COAX • www.timesmicrowave.com
19
LMR-240
TIMES MICROWAVE SYSTEMS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising