STE-1101 - Nautilus Infotech
DATA SHEET
STE-1101
Serial RS-232, RS-422/485 to Ethernet Converter
Port Configuration
 1*RS-232 +
1*RS-422/485 +
1*10/100Base-T
Operating Temperature
 0~70oC
Key Features
 Surge protection and over
current protection in serial
port
 ESD 15KV protection in
serial port
 Support 1.5KV magnetic
isolation protection in RJ45
port.
 Login password supported
for security access
protection
 Web-based for friendly
setup
STE-1101 – the two serial ports to Ethernet with 0
~70oC operating temperature, perfect to install in
industrial environments.
STE-1101 serial to Ethernet converter has two serial
ports and one Ethernet port for harsh industrial
environments. The converter with the operating
temperature ranging from 0 to 70°C is better for liteindustrial application. The STE-1101 with a compact size
which supports wall mounting installation can set up the
serial to Ethernet network more easily.
The converter including 1.5KV RJ45 magnetic isolation,
15KV ESD protection and high surge protection can
provide high reliable serial communication network.
DATA SHEET
1
Hardware Specifications
Port Configuration
RS-232
Connector
Signals
RS-422/485
Connector
Signals
Surge Protection
Built in Terminal
Serial
Communication
Selection Detection
Baud rate
ESD protection
Surge protection
Over Current
Protection
1*RS-232 +
1*RS-422/485 +
1*10/100Base-T
Ethernet
Speed
Auto MDI/MDI-X
Protocol
Port1:DB-9
Port 1:
Rx , Tx , GND , RTS , CTS , DTR ,
DSR , DCD
Mode
Terminal block (4-pin)
RS-422/RS-485Full: TX+, TX-, RX+,
RXRS-485Half: D+, DSupported
Supported
RS-422/485 Signal
300bps~115.2kbps
15KV
Supported
Supported
Magnetic Isolation
Management
Managed Interface
Security
Power Input voltage
Power consumption
Operating
Temperature
Operating Humidity
Mounting
Storage Temperature
Storage Humidity
Housing Protection
Dimensions
(WxHxD mm)
Weight
EMI
10/100 Mbps
Supported
ARP, IP, ICMP, UDP, TCP, HTTP,
DHCP
TCP Server/TCP
Client/UDP/Virtual Com/Pairing
1.5KV
HTTP through Ethernet port
Login password protection
9~24VDC (External DC Power
adapter)
6Watt (Max)
0°C~70°C
10 to 95% RH (non-condensing)
Wall-Mounting
-10°C~85°C
5 to 95% RH (non-condensing)
Plastic
90x20x60
100g
CE
FCC Part15 class A
Ordering Information
Part Number
Description
STE-1101
1*RS-232 + 1*RS-422/485 + 1*10/100Base-T serial to Ethernet converter (0°C~70°C)
DATA SHEET
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising