multiCLASS RP15, RP40 and RPK40 Readers

multiCLASS RP15, RP40 and RPK40 Readers
13.56 MHz Contactless
Multi-Technology
Transition Solution
™
multiCLASS RP15, RP40 and RPK40 Readers
13.56 MHz Contactless and 125 kHz Proximity Card Readers • 6125, 6136, 6145
w Simple Migration – From the most popular proximity
technologies to iCLASS®.
w Powerful Options – Provides flexible options for processing
multi-technology cards and configuring the reader’s audio/
visual characteristics.
w GSA approved – Included in the U.S. General Services
Administration (GSA) FIPS 201 Approved Products List.
w Dual Factor Authentication (RPK40 only) – Combine
contactless card presentation with a PIN.
ACCESS upgrade.
The multiCLASS™ family of card readers are designed for customers upgrading their current card
system from the most popular proximity technologies to iCLASS® credentials. With the RP40 and RPK40
readers, the customer has the ability to transition to smart cards over time while incorporating the use of
multiple card technologies within a single building or across multiple facilities.
The multiCLASS reader line provides enhanced security through mutual authentication and data encryption.
HID, Indala and other popular proximity technologies are supported by multiCLASS. The RP40’s and
RPK40’s designs allow project-specific formats and keys, and enables HID to support additional technologies
as they become available.
Only the multiCLASS family of products provides true iCLASS security, the ease of proximity technology,
the power of smart cards and the confidence of choosing HID, the worldwide leader in access control.
Unique Read Selection
w Enable iCLASS, proximity or both technologies at the same time.
w Multiple data outputs available when multi-technology card is presented depending on preference.
w Configuration cards can configure the reader to custom installation requirements.
w Reads: 125 kHz – HID, Indala or AWID Proximity
13.56 MHz – iCLASS, DESFire® - ISO 15693 CSN (MyD, ICODE, Tag-it), ISO 14443A
CSN (MIFARE®) and US Government PIV
Seamless Upgrade
w Same HID and Indala Proximity reader features and format compatibilities.
w Ultra-low current consumption.
w Larger voltage span (5-16 VDC).
w All Corporate 1000 formats can be migrated.
w For additional security, our Elite program is available with iCLASS credentials.
w Wiegand or Clock-and-Data outputs easily interface with existing access control panels.
w The RPK40 combines a contactless card presentation with a personal identification number (PIN) to
support dual factor authentication of identity.
wThe RP15 is a mullion form factor drop in replacement for the HID MiniProx.
Features
Security
64-bit authentication keys are extremely secure. Readers and cards
require matching keys to function. All RF data transmission between
the card and reader is encrypted, using a secure algorithm. The
key management system reduces the risk of compromised data or
duplicated cards.
Elite Custom Keys
Custom keys provide the highest level of security, where cards and
readers are uniquely matched to individual sites or customers, and
are non-interchangeable. Combining Elite custom keys with our
Corporate 1000 can offer companies a scalable solution that can be
implemented in facilities worldwide.
Audiovisual
Indication
Easily Interfaced
The reader’s Wiegand output easily interfaces with most existing
Wiegand protocol access control panels. The reader reads standard
HID format data and will output data as encoded. When reading
MIFARE® cards, the reader can be configured to output 26-bit, 32-bit,
34-bit, 37-bit, 40-bit, or 56-bit Wiegand formats, based on the card
serial number.
Indoor/Outdoor Design
Rugged, weatherized polycarbonate enclosure, designed to withstand
harsh environments, provides reliable performance and resistance to
vandalism. A tamper switch in reader housing facilitates the notification
of a tamper alarm.
Audio sounder provides various tone sequences to signify access
granted, access denied, power up and diagnostics. Visually impaired
cardholders can easily distinguish between access granted and
access denied. A high-intensity light bar provides a clear visual status
indication in red, green or amber, even in bright sunlight. (Note: Light
bar will illuminate amber when a PIV/FIPS 201 card is read.)
Options
Colors - Black or Gray
Key Management - Standard, Elite or Custom
Selectable Output Type (for MIFARE cards)
Termination Options: 18” (46 cm) Pigtail
Programmable LED/Beeper operation
Accessory - Security Tool; 04-0001-03
RP40 multiCLASS™ Reader
RPK40 multiCLASS™ Reader with Keypad
RP15 multiCLASS™ Mullion-mount
Reader
6125B (Wiegand)
6123B (Clock-and-Data)
6124B (Transit)
6136A (Wiegand)
6133A (Clock-and-Data)
6134A (Transit)
6145B (Wiegand)
6143B (Clock-and-Data)
6144B (Transit)
**Read Range
iCLASS Card: 3.5 – 4.25” (9.0 - 11.0 cm)
iCLASS Key/Tag: 1.0 - 2.0” (2.5 - 5.0 cm)
HID Prox ISO Card: 2.5 – 3.5” (6.5 - 9.0 cm)
HID Prox Clamshell Card: 3.5 – 4.0” (9.0 - 10.0 cm)
HID Prox Keyfob/Tag: 1.0 – 2.25” (2.5 - 5.5 cm)
Indala Proximity ISO Card: 1.5 – 2.0” (4.0 - 5.0 cm)
Indala Proximity Clamshell Card: 1.75 – 2.25” (4.5 - 5.5 cm)
Indala Proximity Keyfob/Tag: 1.0 – 1.75” (2.5 - 4.5 cm)
iCLASS Card: 3.5 – 4.25” (9.0 - 11.0 cm)
iCLASS Key/Tag: 1.0 – 1.5” (2.5 - 4.0 cm)
HID Prox ISO Card: 2.5 – 3.5” (6.5 - 9.0 cm)
HID Prox Clamshell Card: 3.5 – 4.0” (9.0 - 10.0 cm)
HID Prox Keyfob/Tag: 1.25 – 1.75” (3.2 - 4.5 cm)
Indala Proximity ISO Card: 1.5 – 2.0” (4.0 - 5.0 cm)
Indala Proximity Clamshell Card: 1.75 – 2.25” (4.5 - 5.5 cm)
Indala Proximity Keyfob/Tag: 1.0 – 1.25” (2.5 - 3.2 cm)
iCLASS Card 3.0 - 3.5” (7.5 - 9.0 cm)
iCLASS Key/Tag: 1.0 – 1.5” (2.5 - 4.0 cm)
HID Prox ISO Card: 2.5 – 3.5” (6.5 - 9.0 cm)
HID Prox Clamshell Card: 3.5 – 4.0” (9.0 - 10.0 cm)
HID Prox Keyfob/Tag: 1.25 – 1.75” (3.2 - 4.5 cm)
Indala Proximity ISO Card: 1.5 – 2.0” (4.0 - 5.0 cm)
Indala Proximity Clamshell Card: 1.75 – 2.25” (4.5 - 5.5 cm)
Indala Proximity Keyfob/Tag: 1.0 – 1.25” (2.5 - 3.2 cm)
Mounting
A three-part reader makes installation easier. Mounting plate
attaches to U.S./EU/Asian back box, 52-60 mm screw hole
spacing (vertical or horizontal), or to any flat surface. Reader
body fits onto mounting plate. Cover fits over reader body,
secured with a screw. An auto-tuning circuit provides
consistent read ranges on various mounting surfaces with
minimal reduction on metal surfaces.
Mounting plate attaches to U.S./EU/Asian back box, 5260 mm screw holespacing (vertical or horizontal). Keypad
reader housing latches onto mounting plate, secured with
a screw. An optional spacer can be used for surface mount
installations. Mounting on metal can affect optimal read
range and we recommend the use of our spacer to
maximize read range.
Mounting plate attaches to mullion, door frame,
U.S. single-gang J-box or any flat surface. (Reader
will not cover junction box.) Reader body snaps
onto mounting plate, secured with a screw. Identical
mounting holes as the HID MiniProx.
3.3” x 4.8” x .95” (8.4 cm x 12.2 cm x 2.4 cm)
3.3” x 4.8” x 1.05” (8.4 cm x 12.2 cm x 2.7 cm)
6.1” x 1.9” x 0.9” (15.6 cm x 4.8 cm x 2.3 cm)
8.8 oz (249.5 g)
9.1 oz (258 g)
5.9 oz (166 g)
*Model Number
Dimensions
Weight
Power Supply
Current
Requirements
Operating
Temperature
5 to 16 VDC. Linear supply recommended
50/75 mA @ 12 VDC
80/100 mA @ 12 VDC
50/75 mA @ 12 VDC
-31º to 150º F (-35º to 65º C)
OperatingHumidity
5% to 95% relative humidity non-condensingw
Transmit Frequency
Cable Distance
Wiegand/Clock & Data Interface 500 ft (150 m) 22 AWG
125 kHz and 13.56 MHz
125 kHz Proximity
• HID or Indala proximity cards, keyfobs, and tags
• AWID Credentials
Card Compatibility
13.56 MHz contactless smart cards
• ISO 15693 - read only; 2k bit (256 Byte), 16k bit (2k Byte) and 32k bit (4k Byte); serial number
• ISO 14443A - read only; MIFARE (serial number)
• ISO 14443B - read only; 2k bit (256 Byte) and 16k bit (2k Byte)
• US Government PIV
Environmental
Certifications
IP55
UL294/cUL (US), FCC Certification (US), IC (Canada), CE (EU), C-tick (Australia, New Zealand), SRRC (China), MIC (Korea), NCC (Taiwan), MIC ( Japan), iDA (Singapore), RoHS
Housing Material
Warranty
UL94 Polycarbonate
Warrantied against defects in materials and workmanship for life. (See complete warranty policy for details.)
* Consult How To Order Guide for specific ordering instructions
**Dependent upon installation conditions.
© 2009 HID Global Corporation. All rights reserved. HID, the HID logo, and iCLASS are
trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other
trademarks, service marks, and product or service names are trademarks or registered trademarks
of their respective owners. Rev. 05/2009
80% Recycled
40% Post-Consumer Waste
Processed Chlorine Free
ACCESS experience.
MKT-RP15_RP40-RPK40_DS-EN
hidglobal.com
HID Global Offices:
Corporate
North America
15370 Barranca Pkwy
Irvine, CA 92618
U.S.A.
Tel: 1 800 237 7769
Tel: +1 949 732 2000
Fax: +1 949 732 2360
Asia Pacific
19/F 625 King’s Road
North Point
Island East
Hong Kong
Tel: +852 3160 9800
Fax: +852 3160 4809
Latin America
Circunvalacion Ote. #201 B
Despacho 2
Col. Jardines del Moral
Leon 37160, Gto.
Mexico
Tel: +52 477 779 1492
Fax: +52 477 779 1493
Europe, Middle East & Africa
Haverhill Business Park
Phoenix Road
Haverhill, Suffolk
CB9 7AE
England
Tel: +44 (0) 1440 714 850
Fax: +44 (0) 1440 714 840
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising