i60a_QuickManual_v11 copy

Quick Manual
Mode and function
How to pair with Commander Air 1
1
Compatible with
Nissin Air System
2
OFF
HOLD 3 Sec.
BeforeC the pairing begins,
make sure your i60A and
Air 1Z are turned off.
Hold the Power button and
Lock button on your i60A
until you hear the beeping sound.
A
B
3
4
Mode
Power
Press once to turn on or off.
S
unlock
Built in video light with 9 steps of
output level adjustment.
Video light
Full Automatic
Mode
Flash light is fully controlled by the camera
for the most proper exposure.
TTL Program
Mode
Flash light is automatically controlled
by the camera but the flash exposure value
can be compensated.
Manual Setting
Mode
HOLD 3 Sec.
DONE!
Hold the S button and
Power button on your Air 1
until the Pilot light is flashing.
After the pairing is done,
the i60A and Air 1 will
stop beeping and flashing.
Scan the code or
go to the “Nissin Digital Global”youtube channel
to watch the pairing guide.
Selecting the desired manual power
on the flash unit.
High-speed
synchronization
Hold the button for 1 second to activate or
deactivate High speed synchronization.
Mute
Hold the button for 1 second to activate or
deactivate the Mute function.
Wireless Channel
Hold the button for 1 second to change
wireless channel during wireless mode.
Manual zoom
Hold the button for 1 second to change
zoom head position.
Nomenclature
15
Hold the button for 1 second to lock or
unlock all the buttons on the right side dial.
Lock
Press once to test-flash
Green: flash ready Red: flash recharging
Yellow: Nissin Air System Pairing mode
Pilot Button
1 Fill-in reflector
9 Color monitor
2 Flash head
10 Pilot button (Test flash button)
3 Light diffusing panel
11 Mode dial
4 Video light
12 Control wheel and button
5 Remote/ Slave sensor
13 Power button
Optical mode
Sony:
A: RMT TTL B: RMT2 TTL C: RMT M
Canon, Nikon & Four Third:
A: Group A B: Group B C: Group C
6 AF-assist light
14 Unlock button
7 Battery pack adapter
15 Battery compartment door
Optical mode will activate automatically
when no NAS signal, or 6 seconds after
disconnected from other NAS device.
Accessories:
Wireless
NAS mode
A: Group A B: Group B C: Group C
Wireless TTL
Slave Mode
(Optical mode not available for Fujifilm system)
Slave Film
Slave Digital
Contents are subject to change without further notice.
8 Mounting foot and Hotshoe contacts
Soft box
Flash stand
Pouch
NP477.8.16.04

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project