Content - Atos elektro
Content
1. Reference ................................................................................................. 1
1.1 General Features ............................................................................ 1
2. Product Overview .................................................................................... 2
2.1 Front Panel ..................................................................................... 2
2.2 Rear Panel ...................................................................................... 2
2.3 Remote Control Unit (RCU) .......................................................... 3
3. Installation................................................................................................ 4
3.1 Antenna Settings ............................................................................ 4
3.2 Factory Default .............................................................................. 5
3.3 USALS Setup ................................................................................. 5
4. Edit Channel............................................................................................. 5
4.1 TV/Radio Channels ........................................................................ 5
4.2 Favorites ......................................................................................... 6
5. Settings..................................................................................................... 6
5.1 System Settings .............................................................................. 6
5.2 OSD Setup ..................................................................................... 7
5.3 Parental control .............................................................................. 7
5.4 Times .............................................................................................. 7
5.5 Color Setting .................................................................................. 8
5.6 About STB ..................................................................................... 8
6. Expansion................................................................................................. 9
7. Basic Operation...................................................................................... 10
7.1 Audio ............................................................................................ 10
7.2 EPG .............................................................................................. 11
7.3 Subtitle ......................................................................................... 11
7.4 Teletext ......................................................................................... 11
8. Additional Information ........................................................................... 11
8.1 Trouble Shooting .......................................................................... 11

1. Reference
1.1 General Features
DVB-S/DVB-S2 Satellite Compliant (MPEG-II/ MPEG-IV/ H.264)
SCPC & MCPC receivable from Ku and C band satellites
Universal, Single, Single S & C Band Wideband LNB
Sensitive Tuner with Loop-Through
DiSEqC1.0/1.1/1.2/1.3 (USALS)
Blind search supported
Auto DiSEqC Search
PAL/NTSC Conversion
True full Color (16 bits) on screen display (OSD)
Storing memory: 100 satellite, 2000 transponders and 4000 channels
8 favorite group and parental lock supported
Multi-language menu supported
Multi-language audio supported
Multi-language DVB Subtitle output
7 days Electronic Program Guide (EPG)
Teletext output through VBI and OSD
USB 2.0 Interface
1
2. Product Overview
2.1 Front Panel
1. Power LED :Power indicator.
2. Signal LED:Signal indicator.
3. Display:It displays channel information.
4. Power button :Switch between operation and standby modes.
5. ▲╱▼:Change channel in viewing mode and move the cursor up/down in
menu mode
2.2 Rear Panel
1. LNB IN:Connect the satellite antenna cable.
2.COAXIAL:Digital audio output.
3. USB2.0:One USB 2.0 Host Port.
4. HDMI:Connect to the TV using an HDMI cable.
5. TV SCART:Connect to the TV using a Scart cable.
6. DC-12V:Power on/off.
2
2.3 Remote Control Unit (RCU)
You can control this receiver by this remote controller with full function.
1. POWER:
Power button.
2.MUTE:
Turn the sound On/Off.
3. DISP: Set the HDMI mode.
4. MODE: Set the display format.
5. TV/Radio: Switch between TV and RADIO.
6. FIND: Quickly find channels which you want.
7. NUMERIC KEY (0~9): Change program or input
number.
8. EPG: Display the program guide.
9. USB /■: Stop function or enter USB menu .
10. MENU: Activate main menu or exit to live
11. EXIT:Exit current menu step by step.
12. ◄/►: Change volume ,move up and down in the
menu.
13. ▲/▼: Change program,move up and down in
the menu.
14. Page+/-:Page up/down on menu
15. FAV:Display favorite channel list you set before.
16. RECALL: Switch to the previous viewed
channel.
17. SAT: Show the scanned satellite list .
18. AUDIO: Display the audio list.
19. ZOOM: Picture zooming function.
20. INFO: Display the program information.
21. PAUSE: Freeze the picture.
22. F1~F3: Accessorial function.
23.TXT: Display the teletext.
24. ▕◀ :Previous.
25. ▶▏: Next .
26◀◀: Fast rewind .
27. ▶▶: Fast forward .
28. II:Play Pause/Go to timeshift function .
29. ●:Record program.
30. : Play.
31. :■: Stop function or enter USB menu ..
3
3. Installation
You should install the receiver when powering on your product for the first time
after purchase.
Tip: The default password is 0000. If you have forgotten your password, please
contact your local product distributor.
3.1 Antenna Settings
Antenna Settings allows you to configure the antenna setting parameters.
1. Satellite: Highlight the satellite you want to search.
2.Transponder:Press the VOL+/VOL3. LNB Type: Press the VOL+/VOL-
button to change the TP.
button to
change the LNB frequency.
4. LNB Power: Press the VOL+/VOL-
button to
select the required LNB power.
5. 22kHz: Press the VOL+/VOL-
button to select
ON, OFF or Auto.
6. DiSEqC 1.0: Press the VOL+/VOL-
button to
select the required DiSEqC1.0 input.
7. DiSEqC 1.1: Press the VOL+/VOL-
button to select the required
DiSEqC1.1 input.
8. Motor: Press the VOL+/VOL-
button to select DiSEqC1.2 or USALS.
9. Scan Mode: Press the VOL+/VOL- button to select ALL Channels & FTA
Channels & TV Channels & Radio Channels & FTA TV Channels & FTA Radio
Channels which you want to scan.
10. Start search: Press the VOL+/VOL- button to select Satellite & Multi-Sat &
Blind scan & Transponder & Multi-Transponder which you want to start search.
4
3.2 Factory Default
You can restore the product to the factory default and you can also setup it
according to the wizard.
Input the password. Highlight the option you want and press the OK button to
execute it.
All: All data & settings will be deleted.
Channel List Only: All channels data will be deleted.
Radio Channel Only: All radio channels data will be deleted.
Scramble Channel Only: All scramble channels data will be deleted.
TP Channel Only:System Settings date will be deleted.
SAT Channel Only: All the channels data in the selected satellite will be
deleted.
3.3 USALS Setup
If you set the Motor Mode to USALS, you need set the longitude and the latitude
in USALS Setup.
Setup By Country: Press the Red button, you can choose the country, press
OK button, you will view the city in this country that’s you select.
4. Edit Channel
4.1 TV/Radio Channels
TV/Radio Channels enables you
to move, delete, lock/unlock, rename
the channels in the channel list
conveniently.
5
4.2 Favorites
Add the Favorite channel you want to set up , and change the types. You can add
or remove channels from the favorite groups.
5. Settings
5.1 System Settings
1.Menu Language: Set the menu language.
2. Audio1: Set the preferred audio
language.
3. Audio2: Set the sub-prime audio
language.
4. Subtitle Language: Set the subtitle
language.
5. Subtitle Control: Set the subtitle on
or off
6. EPG Language: Set the EPG
language.
7. TXT Language: Set the TXT language.
8. Digital Audio: If a channel has AC3 and PCM audio language at the same
time, when you select RAW it will set AC3 audio language as default output and
when you select PCM it will set PCM audio language as default output.
9. Auto Channel Selection: If you set ON, in the channel list will play
automatically when you highlight the channel. If you set OFF, in the channel list
when you highlight the channel, you should press the OK button to play it.
10. Auto Exit CH List: If you set ON, the channel list will disappear when you
press OK on a Highlighted channel. If you set OFF, the channel list will
disappear when you press OK on a playing channel.
11. Recall List: You can turn Recall List on or off. If you set ON, when you press
Recall button of RCU you can get the recall list. If you set OFF, when you press
6
recall button you can go back to the last program you have selected.
12.Low Power Standby:Set Low Power Standby on or off.
13.Front Panel Light: Set the brightness of the LED.
5.2 OSD Setup
1. Menu Transparency: Set the transparency of all menus.
2. TXT Transparency: Set the transparency of
teletext.
3. Display Mode: Set the HD format .
4. TV Type: Set the TV Type .
5. Screen Mode: Set the display format
according to the screen ratio. Select TV screen
mode either 4:3 or 16:9 according to the TV
type, or press the MODE button of RCU
directly.
6. OSD Timeout: Set the display time of the program information.
5.3 Parental control
Parental Control allows you to set limits for each program or change your
previous password. You can also lock the changes you have made using
Passwork Lock, Installation Lock and System Lock ,And you can change
Age Rating,Change PIN.
5.4 Times
5.4.1 Time Settings will set the time mode, time zone and summer time.
1.Time Mode:Switch the Time Mode to Auto or Manual .
2. Time Offset :Set the time zone according to your city.
3. Summer Time:Set the Summer Time On or Off.
7
5.4.2 Event Timer You can set 8 timer
events. It will record or play the program
automatically according to the timer event
list that youset.Press the Red button to
setup a timer, and press the OK button to
save the timer after setup. You also can
edit or delete a timer.
5.4.3 Sleep Timer
Sleep Timer can set the automatic turn off time.
5.4.4 Standby Time
Standby Time can set the time display on front panel when standby.
5.4.5 APD Setting
APD Setting can set automatic standby when you have no operation in the time
you setup.
5.5 Color Setting
Color Setting set the brightness, contrast and saturation.
5.6 About STB
ABOUT STB can get the information about the STB, such as product name,
software & hardware version, and serial number and so on. When you need
service from the dealer you need to submit this information in order go get the
correct and fast after sales service.
8
6. Expansion
USB can play many kinds of media files, you can record program and playback
it and you can do various operations when using USB HDD or USB disk.
Note: It supports FAT, FAT32 and NTFS format USB disk or USB HDD.
1 Basic Operations
1)Tool
Tool Enables you to Rename/Delete/Move to/Copy to /Create New
Folder/Sort/Format Disk.
2.Upload :Upload Data to
USB
2)Play Files
1. Music
It supports *.mp3, *.ogg, *.wav
and *.flac format music files.
OK: Play the selected file.
▲╱▼: Change the highlighted
item.
■ : Stop playing file.
▕◀◀: Play the previous file.
▶▶▏: Play the next file.
▶▶: Fast forward.
◀◀: Fast rewind.
▶ II: Play or Pause.

◀╱▶ : Adjust volume.
EXIT: Exit playing state and return to file list menu.
9
2. Photo
It supports *.bmp, *.jpg, and *.gif format photos.
OK: View the photo.
▕◀◀: Play the previous file.
▶▶▏: Play the next file.
▶ II: Play or Pause.
EXIT: Exit the current menu.
3. Movie
It supports *.3GP, *.AVI,*.MKV, *.MP4, *.MOV, *.MPG, *.TS, *.M2TS, *.DAT,
*.VOB format movie files.
OK: View play list or play the highlighted file in the play list.
▶ II: Play or Pause.
■: Stop playing file.
◀◀: Fast rewind.
▶▶: Fast forward.
▕◀◀: Play the previous item.
▶▶▏: Play the next item.
INFO: Display the playing progress. In this menu, press the INFO button again
to display the file’s detail information.
AUDIO: Set the audio language.
SUB: If the file has subtitle, press the SUB button can change the subtitle.
◀╱▶ : Adjust volume.
0-9: Jump to position as you like.
EXIT: Exit the current menu.
7. Basic Operation
7.1 Audio
You can select the language you prefer in Audio if the current program is
available in multiple audio languages.
1. Press the AUDIO button.
10
2. Press the OK button to select the audio language you prefer.
3. Select audio direction (Left, Right, Mix, Stereo) using the ◀ ╱▶ button.
4. Press the EXIT button to close.
7.2 EPG
You can view the EPG information of all channels in time and date order.
1. Press the EPG button.
2. Press the GREEN button to switch EPG mode between Weekly EPG and
Day EPG.
7.3 Subtitle
You can select the language for the subtitle if the program provides subtitle
information.
1. Press the SUBTITLE button.
2. Select the required subtitle language and press the OK button. The subtitle of
the selected language will be displayed at the bottom of the screen.
7.4 Teletext
You can view the teletext information of this program.
1. Press the TXT button.
2. Press the ▲╱▼ button to page up or page down.
3. Press the NUMERIC(0-9) buttons can go to the designated page directly.
4. Press the color button can back to the previous page.
8. Additional Information
8.1 Trouble Shooting
Before contacting your local service centre, please read the tips below carefully.
If the problem persists after completing the following procedure, please contact
11
your local product distributor or service centre for further instructions.
1. No message displayed on the front display. (The product will not switch
on.)
• Check the main power cable and make sure it is plugged into a suitable power
outlet.
• Check that the mains supply is switched on.
• Connect the power cable to a different power outlet.
• Check that the power switch is on at the rear of the product. (where applicable)
2. No picture
• Make sure that the product is powered on and in operation mode. (Press the
STANDBY button)
• Make sure that the AV/HDMI/YUV cable is firmly connected to the TV.
• Make sure that the antenna cable is properly connected to the product.
• Be sure to activate channel search.
• Check the brightness level of the TV.
• Check if the channel is currently on air. Contact the broadcaster to ensure that
the channel is running.
3. Poor picture/sound quality
• Make sure there is no mobile phone or microwave oven near the product.
• [Satellite] Check that your dish alignment is correct.
• [Satellite] Change the satellite dish for a larger one as this will increase the
signal levels received.
• [Satellite] Replace the LNB with a lower noise factor in cases where the noise
factor is too high.
• [Satellite] Replace the LNB with a new one in case it is damaged or out of
order.
• [Satellite] Check the signal levels and adjust your antenna if the level is too low.
The signal level may be affected by weather conditions.
• [Terrestrial] Adjust the antenna direction to get a better picture.
• [Terrestrial] Set the antenna power in menu to On, if you use the active
12
antenna to improve the reception.(where applicable)
4. No or poor sound
• Check that your AV/HDMI cable is connected correctly.
• Check the volume levels of your TV set and the product.
• Check if the product or TV is on mute.
• Check audio type or soundtrack option. (where applicable)
5. Remote control does not operate.
• To control the product, the top end of the remote control should point directly
towards the receiving part of the product.
• Remove and reinsert the batteries in the remote control.
• Replace the batteries in the remote control for a new set.
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising