Quick Start Guide

Quick Start Guide
Quick Start Guide
V1.0
Overview
The OSMOTM+ is a professional handheld gimbal
camera that combines mobility and stability in one
device. Its camera features an optical zoom lens
providing 3.5x optical zoom and 2x lossless digital
zoom. It shoots sharp 12MP still photos and stable
video at up to 4K. A mobile device can be mounted on
the side of the handle to display a live feed from the
camera through a high-speed Wi-Fi video link.
1
15
14
13
2
12
3
11
10
9
8
4
5
6
7
1 Camera
10 System Status LED
2 Roll Motor
11 Gimbal Securing Ring
3 Pan Axis Lock
12 Pan Motor
4 Camera Status LED
13 Camera Micro USB Port
5 Joystick
14 Micro SD Card Slot
6 Shutter Button
15 Tilt Motor
7 Mobile Device Holder
8 Record Button
9 Power Switch
16
17
18
19
20
23
21
22
16 Air Vents
17 Built-in Microphone
18 External Microphone Input
19 Trigger
20 DJI Rosette Mount
21 Lanyard Hole
22 Battery Cover
23 Flexi Microphone
Specifications
●
●
Handle
Dimensions
2.4×1.9×6.4 inches
(61.8×48.2×161.5 mm)
Weight (including battery) 201 g
Supported Mobile Device Max Size: 6.2 (L) × 3.1 (W) inches
158.2 (L) × 77.9 (W) mm
Gimbal
Model
Zenmuse X3 Zoom
Weight
268 g
Output Power (with camera)
Angular Vibration Range
Mount
Controllable Range
Mechanical Range
●
Max Controllable Speed
Camera
Model
Sensor
Lens
ISO Range
Electronic Shutter Speed
Max Image Size
Still Photography Modes
Video Resolution
Video Recording Modes
Max Video Bitrate
Supported File Systems
Photo Formats
8W
±0.02°
Detachable
Tilt: -35° to +135°
Pan: ±320°; Roll: ±30°
Tilt: -50° to +140°
Pan: ±330°; Roll: -50° to +90°
120°/s
X3 ZOOM / FC350Z
Sony Exmor R CMOS; 1/2.3”
Effective pixels:12.40 M
(Total pixels: 12.76 M)
3.5× Optical Zoom,
22 - 77mm Equivalent
F2.8 (Wide) - F5.2 (Tele),
FOV 92° (Wide)- 35° (Tele)
Focus: 0.5 m to infinity
100 - 3200 (video); 100 - 1600 (photo)
8 s - 1/8000 s
(up to 30 s when camera is in M mode)
4000×3000 pixels
Single Shot
Photo Burst Mode: 3/5/7 shots
Auto Exposure Bracketing (AEB):
3/5 bracketed frames @ 0.7 EV bias
Interval
Auto Panorama
Selfie Panorama
UHD: 4K (4096×2160) 24/25p
4K (3840×2160) 24/25/30p
2.7K (2704×1520) 24/25/30p
FHD: 1920×1080 24/25/30/48/50/60/100p
Auto; Slow Motion
60 Mbps
FAT32 (≤ 32 GB) ; exFAT (> 32 GB)
JPEG, DNG (RAW)
Video Formats
Supported SD Cards
●
●
●
●
MP4/MOV (MPEG-4 AVC/H.264)
Micro SD; Max. Capacity: 64 GB
Class 10 or UHS-1
32° to 104° F (0° to 40° C)
48 KHz; AAC
Operating Temperature
Audio Output
WiFi Video Link
Operating Frequency
2.412 - 2.462 GHz; 5.180 - 5.805 GHz
Max Transmission Distance 82 feet (25 m)
Transmitter Power (EIRP) 2.4G: 8 dBm; 5G: 12 dBm
Intelligent Battery
Model
HB02-542465
Type
LiPo
Capacity
1225 mAh
Energy
14.1 Wh
Voltage
11.55 V
Charging Temperature
41° to 104° F (5° to 40° C)
Operating Temperature
32° to 104° F (0° to 40° C)
Battery Charger
Model
OS1C11
Input
100 - 240 V; 50/60 Hz
Output
12.6/13.2 V, 0.8 A
Flexi Microphone
Sensitivity
-32 ± 3 dB (0 dB =1 V/Pa)
Frequency Response
100 - 10000 Hz
Signal-to-Noise Ratio
60 dBA
Pin Diameter
3.5 mm
Length
88 mm
Weight
4g
Optional Accessories
Extension Rod
Tripod
Osmo Z-Axis
DJI provides various optional accessories for the Osmo+. Visit the
DJI Online Store for more information: http://store.dji.com
1. Install the DJI GO App
Search for ‘DJI GO’ on the App Store or Google Play,
or scan the QR code to download the app on your
mobile phone.
●
DJI GO supports iOS 8.0 (or later)
and Android 4.3 (or later).
2. Prepare the Battery
Fully charge the battery before using it for the first
time. Insert the battery as shown.
Battery Level
High
●
●
Low
Charge Time: ~110 minutes.
The LED indicator will become solid green when charging is
complete.
3. Mount your Mobile Device
Unfold the arms
Adjust the pads
Place one end
1
3 Place the other end
2
Pull outwards
Rotate to desired angle
●
Ensure your mobile device is fully seated.
4. Unlock the Gimbal
1
1. Rotate the tilt motor
2
2. Slide the Pan Axis Lock up
5. Connect to the DJI GO App
To Power On:
Pull down on the switch
Pull down again > Sleep
Pull down and hold for 1.5 s > Power Off
OSMO_XXXXXX
DJI GO
App
Internet
Turn on your mobile's WiFi and
connect to OSMO_XXXXXX
Default password: 12341234
Launch the app and tap Camera.
Activate the Osmo+ when using it for the first time.
This requires an internet connection.
6. Controls
●
●
Position the camera
directly by hand.
●
●
●
Use the joystick to pan or tilt
the camera.
Record Button
Press once to start recording, and
again to stop recording.
Shutter Button
Press once to take a photo. Press
and hold for burst capture.
Trigger
Hold down the trigger and push
the joystick up and down to
zoom.
Hold down to enable Lock Mode.
Tap twice to center the camera.
Tap three times to enter Selfie
Mode.
●
●
●
SmoothTrack Mode is enabled automatically to
smooth out jerky movements.
The Osmo+ will beep slowly if the gimbal is locked
after it is turned on. This means the camera is
working normally but the gimbal is shut off.
If you need to unlock the gimbal after it is turned on,
you must rotate the pan motor after unlocking the tilt
motor and pan motor to reactivate the gimbal.
For more information, read the User Manual:
http://www.dji.com/product/osmo-plus
※This content is subject to change without prior notice.
OSMOTM is a trademark of DJI.
Copyright © 2016 DJI All Rights Reserved.
Designed by DJI. Printed in China
www.dji.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising