843162单连接指南 Back

843162单连接指南 Back
Digital FHD LED TV
48GSR3100FJ
If you need additional information on your new Television, complete instruction manuals are available for reference and download in our SUPPORT section online at www.polaroidhdtv.com
IMPORTANT SAFELY INSTRUCTIONS
PLEASE READ THIS
BEFORE REMOVING
PRODUCT FROM
THE BOX
We’ve provided:
A. LED TV
B. Stand
C. Screws (12)
If you prefer to wall mount your
TV, do not attach the stand.
Use the instructions in your
wall-mounting kit (not included).
Simple Steps for Attaching Your TV Stand
conper-clad steel or bronze wire,or larger,as a ground wire.
b. Secure antennal lead-in and grounding wires to house with insulators spaced forom
4-6 feet (1.22-1.83m) apart.
c. Mount antenna discharge uint as close as possible to where lead-in enters house.
d. Use jumper wire ont smaller than No.6AWG(13.3mm²)copper,or the equivalent,when
a separate antenna grounding electrode is used.
1. POWER Turns the LED TV on and off (standby mode).
2. S.MODE Sound Mode, press repeatedly to select the presetting sound effect modes.
3. P.MODE Picture Mode, press repeatedly to select the preset picture modes.
4. SLEEP Press repeatedly to activate and/or set the sleep timer.
5. ASPECT Press repeatedly to select the aspect ratio of screen as desired.
6. MTS In NTSC receiving mode, press to select. the audio modes to Mono, Stereo or SAP.
In ATSC Digital receiving mode, press to display the audio selection menu on the screen. Using
the Navigator▲,▼button to select the desire audio mode.
7. CC Press repeatedly to activate and/or set the CC (Closed Caption Display) modes.
8. ADD/ERASE In FAV display mode, press to increase or delete the highlighted channel.
9. FAV. Show the list of favorite channels.
10. SOURCE Press to display the source menu on the screen. Using the Navigator ▲ or ▼
buttons to select the source as desire then press (ENTER) button to confirm your selection.
11. EPG Press to display the Electronic Program Guide in digital TV channels(Operation in
ATSC mode only functions on signals emitting from TV station) .
12.DISPLAY Press to display the information; settings and the status of current mode/station
on the screen.
13. ▲▼ ►◄/ ENTER Press to move the cursor within the setting menu. ENTER Press the
ENTER button to confirm the selection. Press the "ENTER" button, the check mark
will appear to the channel , and the channel is marked as channel list.
14. MENU Displays the setting menu on the screen.
15. EXIT Press to exit from the setting menu.
16.
Play/Pause picture.
decrease the volume level.
17.
Fast rewind playback.
25. CH+/CH- Press to increase or decrease
18.
Stop playback.
the channel number.
19.
Fast forward playback.
26. REPEAT Set a repeating mode.
20.
Previous file or chapter.
27. 0-9 Numeric buttons.
21.
Next file or chapter
28. ● For direct access a digital TV channel.
22. GOTO Go to a specific point in the playback.
(For an example, when access a digital TV
23. Turn off the sound temporary.
channel number 5-1, press button
Press again to turn the sound back.
"5" + "-" + "1").
24. VOL+/VOL- Press to increase or
29. SWAP Return to previous channel.
5*45PWM
Screws(4)
Screws(5)
4*20PWA
Remove the base stand before
mounting the unit on the wall.
Screws(6)
4*15BAH
7.87"
P.MODE S.MODE
CC
EPG
MTS
SLEEP
ASPECT
ADD/ERASE
FAV.
SOURCE
DISPLAY
4
5
8
9
10
12
11
13
7.87"
Four mounting holes
(Size M6 screw)
ENTER
MENU
TROUBLESHOOTING
EXIT
14
15
16
18
19
17
20
23
24
NOTE
Screws(5)
4*10BMH
1
2
3
6
7
This unit is VESA-complian,and is
designed to be wall-mounted with
a VESA-compliant 7.87"x7.87"(200
mmx200mm) mounting kit designde
for flat-panel TVs(not supplied).
Mount this unit according to the
instructions included in the monting
kit. Length of screw should not
exceed 12 mm
Screws(3)
4*25PWM
a. Use No.10AWG(5.3mm²)copper,No.8AWG(8.4mm²)aluminun,No.17AWG(1.0mm²)
Mounting on the wall
21
22
GOTO
VOL
CH
25
REPEAT
26
27
and / or
28
SWAP
29
The TV turn off
automatically.
Forgotten the
preset parental
lock password
Check and make sure the Video output from the connected device is set to HD (High
Definition) and the Audio output is set to PCM (Plus Code Modulation). For details,
refer to the Instruction Manual of the connected device.
No Signal Auto Power off was set to on, when no was received
within 30 minutes, the TV will turn off automatically.
Use the master password 1470 to reset a new password.
Questions?
1-888-636-8599
www.polaroidhdtv.com
Empire Electronic Corporation
5550 Jurupa St, Ontario, CA 91761
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising