FMI-S20

FMI-S20
FMI-S20
Digital Force Gauge with Peak Measurement

Peak measurement with 0,2 % accuracy >> a high
measurement rate allows to detect tensile and
break forces precisely.

Independent solar power supply >> always ready
for use.

Autoreverse display >> use as handheld device or
for installation in test stands.

Overload protection up to 500 % >> with rugged
aluminium die cast housing.
Digital Force Gauges FMI-S20 series with solar energy supply are
made for hand-operated measurements in materials testing or
quality control. The devices can as well be mounted to test
stands. Handles are easily attached to threaded holes on the
sides of the housing.
The sensor modules are integrated in robust die cast aluminium
housings thus an optimal overload protection up to 500 % is
accomplished. Force is applied through a gauge rod with M6
thread. Several standard adapters are included.
Measurement values are clearly displayed, continuously or as
peak values (drag indicator) either in SI unit newton or as weight
unit.
By starting the device the spacial position is automatically
recognized and – if needed – values in the display are reversed
and allways legibly displayed.
Range Part.No.:
Scope of Delivery
50 N
100 N
500 N
1000 N
2500 N
5000 N
FMI-S20B5
FMI-S20C1
FMI-S20C5
FMI-S20K1
FMI-S20K2
FMI-S20K5
All models:
FMI-80xx
FMI-81xx
FMI-941M10
FMI-942M10
Calibration certificate VDI/VDE 2624 sheet 2.1 2R
Calibration certificate DakkS (DKD)-R-3-3, procedure B
Handles for FMI devices, l=80 mm (set of two pieces)
T-Handle for FMI devices, w=80 mm, M10 thread
Hook, flat head, notched head, conical head,
Quickstart operation manual, protection case.
(For more accessories see www.alluris.de)
FMI Measuring range (pull + push)
Resolution
Accuracy
Measuring principle
Operation modes
Overload
Display
Power supply
Temperature range
Housing
Protection code
F(n)
Res(n)
@ 23 °C (F.S.)
Tk [offset]
Tk [relative (F.S.)]
Regular
Peak (Real-time)
Peak (Pull or push)
Max. admissible
Max. display range
Type
Refresh time
Standard
Additional
Operation
Weight
LxWxH
Material
Fixing
(without cable)
S20B5
S20C1
0-50 N
0,01 N
0-100
0,02 N
S20C5
S20K1
S20K2
S20K5
0-5000 N
0-500 N
0-1000 N
0-2500 N
0,1 N
0,2 N
0,5 N
1N
+/- 0,2 % (+/- 1 digit)
Automatic taring (Auto-Tara)
+/- 0,02 %/K
Bidirectional strain gauge with high-speed μ-processor
Real time value (selectable in N | kgf | lb )
Display of latest absolute peak value
Peak value of pull- or push force (drag indicator function)
500 % F(n)
200 % F(n)
120 % (max. tara 20 % von F(n))
LCD, 5-digit, 12 mm high
Selectable: 1000 msec | 500 msec | 200 msec | 100 msec
Solar-cell
via USB 2.0
0...40 °C
480 g
1.150 g
150 x 82 x 29 mm
Aluminium die cast
Hardened steel
2 x M4, 2 x M5, center (adjusting holes)
IP40
IP65
Subject to changes without notice, pictures represent the products as example. FMI-S20_EN (12/14)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising