8200-0612-00 A0 Intellex 4.0 Release Notes

8200-0612-00 A0 Intellex 4.0 Release Notes
Release Notes
Intellex
Software Update – Version 4.11
Applicable Software
•
Intellex 4.11
•
Network Client 4.11
Product Data
Visit the Intellex® Digital Video Management
Systems section of our web site –
www.americandynamics.net/intellex – to
download data sheets and other
documentation in PDF format.
Note:
In case of discrepancy, the information in this document supersedes the
information in any document referenced herein.
8200-0840-04 B0
Contents
WHAT’S NEW IN THIS RELEASE.......................................................................2
NEW FEATURES AND ENHANCEMENTS .........................................................3
Composite Video Output Feature .................................................................................................3
OPEN LIMITATIONS AND KNOWN BUGS .........................................................5
1
8200-0840-04 B0
Intellex Version 4.11 Release Notes
What’s New in This Release
One new software feature has been added to the 4.11 Intellex Ultra and Network
Client:
•
Composite Video Output
See New Feature and Enhancements for more details on the added feature.
It will not be possible to install the Intellex 4.11 software on any platform other than
the Ultra.
Upgrades to the 4.11 software will only be compatible with any Intellex Ultra or
Network Client running software version 4.10.
2
8200-0840-04 B0
Intellex Version 4.11 Release Notes
New Features and Enhancements
Composite Video Output Feature
The Composite Video Output Feature enables the BNC video output on an
Intellex Ultra to drive a composite monitor with either live video from the active
cameras or with playback video, depending on how the Intellex display is
configured. The video standard of the output is either PAL or NTSC depending
on the video standard selected on Intellex.
The composite output of the VACD3 would operate in one of three modes:
•
•
•
Mode 0
Mode 1
The VACD3 composite output is always disabled.
The VACD3 composite output would only display
live video when the Main (VGA) monitor is also
displaying live video.
Mode 2
The VACD3 composite output would display live
or playback.
Mode 2 will have significant and serious impact on the performance of the
Intellex.
The Graphics Overlay would operate in one of two modes:
•
•
Graphics Overlay Disabled
Graphics Overlay Enabled
A setup dialog will be available via a shortcut on the Windows desktop to allow
the user to select both the composite output mode and the graphic overlay mode.
The user shall be able to select the mode of operation via combo boxes. See
figure 1 below for new setup dialog.
3
8200-0840-04 B0
Intellex Version 4.11 Release Notes
The shortcut to the setup dialog will be named Composite Video Output
Configuration
The Mode Selection will be:
Mode 0: Off
Mode 1: Live/Live
Mode 2: Full Operation
The default will be Mode 0.
The Graphics Overlay Selection will be:
Off
On
The default will be Off.
Figure 1: Composite Video Output Configuration Setup Dialog
4
8200-0840-04 B0
Intellex Version 4.11 Release Notes
Open Limitations and Known Bugs
The table below highlights the open limitations and known bugs against the Intellex
version 4.11 release only.
Open limitations and known bugs may exist from other releases of the Intellex Product
Suite, please refer to the specific release for the appropriate information.
Description
Suggested Work-Around
4488 – If you redefine the Playback Overlay
position, it repositions correctly on the
Intellex, however it does not reposition on the
Composite Video Output Monitor.
To redefine the Playback Overlay position:
Go to Setup > Display, set the Overlay position.
To ensure the Playback Overlay is repositioned correctly
on the Composite Video Output Monitor:
Restart the Intellex.
5
8200-0840-04 B0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising